Top

The International Journal of Advanced Manufacturing Technology

Published in:

12-08-2020 | ORIGINAL ARTICLE

An investigation into microstructure and high-temperature mechanical properties of selective laser-melted 316L stainless steel toward the development of hybrid Ampliforge process

Authors: Armin Habibiyan, Abbas Zarei Hanzaki, Hamid Reza Abedi

Published in: The International Journal of Advanced Manufacturing Technology | Issue 1-2/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The most prevalent hybrid additive manufacturing (HAM) method in the industry involves the combination of conventional processes, such as hot isostatic pressing or forging. In this way, a part is printed to its near-net-shape by additive manufacturing and then finished using open forge (Ampliforge). Hereby, the performance of the printed part will be improved by the downstream processes; this method also affords a reduction in time, cost, and waste material. In this study, the AISI 316L stainless steel parts were produced through selective laser melting (SLM) process and the cellular structure with columnar grains appeared. Then, hot compression experimental works were performed to investigate flow behavior, hot workability, density, and microstructure evolutions during the process. This process resulted in a near fully-dense part with a homogeneous microstructure without anisotropy of properties and higher hot deformation activation energy and peak stress in comparison with similar conventionally manufactured stainless steel.

previous article Closed-loop mode geometric error compensation of five-axis machine tools based on the correction of axes movements

next article Numerical and experimental investigation on the rivet head flushness in automatic countersunk riveting

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Cheng B, Shrestha S, Chou K (2016) Stress and deformation evaluations of scanning strategy effect in selective laser melting. Addit Manuf 12:240–251. https://doi.org/10.1016/J.ADDMA.2016.05.007CrossRef

Bartolomeu F, Buciumeanu M, Pinto E, Alves N, Carvalho O, Silva FS, Miranda G (2017) 316L stainless steel mechanical and tribological behavior—a comparison between selective laser melting, hot pressing and conventional casting. Addit Manuf 16:81–89. https://doi.org/10.1016/J.ADDMA.2017.05.007CrossRef

Frazier WE (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23:1917–1928. https://doi.org/10.1007/s11665-014-0958-zCrossRef

Huang SH, Liu P, Mokasdar A, Hou L (2013) Additive manufacturing and its societal impact: a literature review. Int J Adv Manuf Technol 67:1191–1203. https://doi.org/10.1007/s00170-012-4558-5CrossRef

Herzog D, Seyda V, Wycisk E, Emmelmann C (2016) Additive manufacturing of metals. Acta Mater 117:371–392. https://doi.org/10.1016/J.ACTAMAT.2016.07.019CrossRef

Bambach M, Sizova I (2018) Hot working behavior of selective laser melted and laser metal deposited Inconel 718. AIP Conf Proc 1960:170001. https://doi.org/10.1063/1.5035058CrossRef

Qiu C, Adkins NJE, Attallah MM (2013) Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V. Mater Sci Eng A 578:230–239. https://doi.org/10.1016/J.MSEA.2013.04.099CrossRef

Kunze K, Etter T, Grässlin J, Shklover V (2015) Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM). Mater Sci Eng A 620:213–222. https://doi.org/10.1016/J.MSEA.2014.10.003CrossRef

Springer Fachmedien Wiesbaden (2018) Competition among materials will always spawn innovations. Light Des Worldw 11:22–25. https://doi.org/10.1007/s41777-018-0031-yCrossRef

10.

Kamal M, Rizza G (2019) Design for metal additive manufacturing for aerospace applications. Addit Manuf Aerosp Ind:67–86. https://doi.org/10.1016/B978-0-12-814062-8.00005-4

11.

Alcoa Opens 3D-Printing Metal Powder Plant | 2016-07-22 | Forge Magazine n.d. https://www.forgemag.com/articles/84506-alcoa-opens-3d-printing-metal-powder-plant. Accessed February 1, 2020

12.

Alcoa—the Element of Possibility™ n.d. https://www.alcoa.com/global/en/home.asp. Accessed February 1, 2020

13.

Tao P, Zhong J, Li H, Hu Q, Gong S, Xu Q (2019) Microstructure, mechanical properties, and constitutive models for Ti–6Al–4V alloy fabricated by selective laser melting (SLM). Metals (Basel) 9. https://doi.org/10.3390/met9040447

14.

Abedi HR, Hanzaki AZ, Azami M, Kahnooji M, Rahmatabadi D (2019) The high temperature flow behavior of additively manufactured Inconel 625 superalloy. Mater Res Express 6:116514. https://doi.org/10.1088/2053-1591/ab44f6CrossRef

15.

Mostafa A, Shahriari D, Rubio IP, Brailovski V, Jahazi M, Medraj M (2018) Hot compression behavior and microstructure of selectively laser-melted IN718 alloy. Int J Adv Manuf Technol 96:371–385. https://doi.org/10.1007/s00170-017-1522-4CrossRef

16.

Sizova I, Bambach M (2018) Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing. J Mater Process Technol 256:154–159. https://doi.org/10.1016/J.JMATPROTEC.2018.02.017CrossRef

17.

Bambach M, Sizova I, Emdadi A (2019) Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting. J Manuf Process 37:150–158. https://doi.org/10.1016/j.jmapro.2018.11.011CrossRef

18.

AlMangour B, Kim Y-K, Grzesiak D, Lee K-A (2019) Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing. Compos B Eng 156:51–63. https://doi.org/10.1016/J.COMPOSITESB.2018.07.050CrossRef

19.

Aboulkhair NT, Everitt NM, Ashcroft I, Tuck C (2014) Reducing porosity in AlSi10Mg parts processed by selective laser melting. Addit Manuf 1–4:77–86. https://doi.org/10.1016/J.ADDMA.2014.08.001CrossRef

20.

Yap CY, Chua CK, Dong ZL, Liu ZH, Zhang DQ, Loh LE, Sing SL (2015) Review of selective laser melting: materials and applications. Appl Phys Rev 2:41101. https://doi.org/10.1063/1.4935926CrossRef

21.

Montero-Sistiaga ML, Godino-Martinez M, Boschmans K, Kruth J-P, Van Humbeeck J, Vanmeensel K (2018) Microstructure evolution of 316L produced by HP-SLM (high power selective laser melting). Addit Manuf 23:402–410. https://doi.org/10.1016/J.ADDMA.2018.08.028CrossRef

22.

Gu D, Hagedorn Y-C, Meiners W, Meng G, Batista RJS, Wissenbach K, Poprawe R (2012) Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium. Acta Mater 60:3849–3860. https://doi.org/10.1016/J.ACTAMAT.2012.04.006CrossRef

23.

Verhaeghe F, Craeghs T, Heulens J, Pandelaers L (2009) A pragmatic model for selective laser melting with evaporation. Acta Mater 57:6006–6012. https://doi.org/10.1016/J.ACTAMAT.2009.08.027CrossRef

24.

Salman OO, Gammer C, Chaubey AK, Eckert J, Scudino S (2019) Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting. Mater Sci Eng A 748:205–212. https://doi.org/10.1016/J.MSEA.2019.01.110CrossRef

25.

Faini F, Attanasio A, Ceretti E (2018) Experimental and FE analysis of void closure in hot rolling of stainless steel. J Mater Process Technol 259:235–242. https://doi.org/10.1016/j.jmatprotec.2018.04.033CrossRef

26.

Huang K, Logé RE (2016) A review of dynamic recrystallization phenomena in metallic materials. Mater Des 111:548–574. https://doi.org/10.1016/J.MATDES.2016.09.012CrossRef

27.

Li N, Zhao C, Jiang Z, Zhang H (2019) Flow behavior and processing maps of high-strength low-alloy steel during hot compression. Mater Charact 153:224–233. https://doi.org/10.1016/J.MATCHAR.2019.05.009CrossRef

28.

Chamanfar A, Alamoudi MT, Nanninga NE, Misiolek WZ (2019) Analysis of flow stress and microstructure during hot compression of 6099 aluminum alloy (AA6099). Mater Sci Eng A 743:684–696. https://doi.org/10.1016/J.MSEA.2018.11.076CrossRef

29.

Guo MW, Wang ZH, Zhou ZA, Sun SH, Fu WT (2015) Effect of nitrogen content on hot deformation behavior and grain growth in nuclear grade 316LN stainless steel. Adv Mater Sci Eng 2015:1–8. https://doi.org/10.1155/2015/427945CrossRef

30.

Samantaray D, Mandal S, Kumar V, Albert SK, Bhaduri AK, Jayakumar T (2012) Optimization of processing parameters based on high temperature flow behavior and microstructural evolution of a nitrogen enhanced 316L(N) stainless steel. Mater Sci Eng A 552:236–244. https://doi.org/10.1016/J.MSEA.2012.05.036CrossRef

31.

Ji G, Li F, Li Q, Li H, Li Z (2011) A comparative study on Arrhenius-type constitutive model and artificial neural network model to predict high-temperature deformation behaviour in Aermet100 steel. Mater Sci Eng A 528:4774–4782. https://doi.org/10.1016/J.MSEA.2011.03.017CrossRef

32.

Ghazani MS, Eghbali B (2018) Characterization of the hot deformation microstructure of AISI 321 austenitic stainless steel. Mater Sci Eng A 730:380–390. https://doi.org/10.1016/J.MSEA.2018.06.025CrossRef

33.

Huang X, Zhang H, Han Y, Wu W, Chen J (2010) Hot deformation behavior of 2026 aluminum alloy during compression at elevated temperature. Mater Sci Eng A 527:485–490. https://doi.org/10.1016/J.MSEA.2009.09.042CrossRef

Title: An investigation into microstructure and high-temperature mechanical properties of selective laser-melted 316L stainless steel toward the development of hybrid Ampliforge process
Authors: Armin Habibiyan
Abbas Zarei Hanzaki
Hamid Reza Abedi
Publication date: 12-08-2020
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 1-2/2020
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-05870-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1-2/2020

Manufacturability analysis of metal laser-based powder bed fusion additive manufacturing—a survey

Study on the influence of different cores on section quality in the process of pure rolling rotary draw bending wrinkling of profiles with “日”-shape section

Effect of tool wear on drilling unidirectional CFRP laminates in different fiber cutting angles

Influence of hydrostatic pressure on wetting state and corrosion of superhydrophobic coatings

Analysis of material removal and surface generation mechanism of ultrasonic vibration–assisted EDM

Studies on wear behavior of AlTiN-coated WC tool and machined surface quality in micro endmilling of Inconel 718

Premium Partners