Skip to main content
Top

2020 | OriginalPaper | Chapter

14. Analysis of Rotor Stability Supported by Surface Porous Layered Journal Bearing

Authors : C. Shravankumar, K. Jegadeesan, T. V. V. L. N. Rao

Published in: Tribology in Materials and Applications

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

An analysis of modified Reynolds equation for surface porous layer configuration based on short (Ocvirk) bearing approximation is presented under dynamic conditions. The steady state pressure and dynamic pressure gradients are analyzed using Lund’s perturbation method. The nondimensional parameters of film thickness ratio of surface porous layers, dynamic viscosity ratio of surface layers, and permeability of porous layers are considered in the analysis. The stiffness and damping coefficients, threshold (critical) speed and whirl ratio (critical) for layered bearings are presented. An improvement in critical (threshold) speed of layer (film) journal bearings is evaluated.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference A.Z. Szeri, Composite-film hydrodynamic bearings. Int. J. Eng. Sci. 48(11), 1622–1632 (2010)CrossRef A.Z. Szeri, Composite-film hydrodynamic bearings. Int. J. Eng. Sci. 48(11), 1622–1632 (2010)CrossRef
2.
go back to reference J.A. Tichy, A surface layer model for thin film lubrication. Tribol. Trans. 38, 577–582 (1995)CrossRef J.A. Tichy, A surface layer model for thin film lubrication. Tribol. Trans. 38, 577–582 (1995)CrossRef
3.
go back to reference T.V.V.L.N. Rao, Stabilization of journal bearing using two-layered film lubrication. J. Tribol. 134, 014504 (2012) T.V.V.L.N. Rao, Stabilization of journal bearing using two-layered film lubrication. J. Tribol. 134, 014504 (2012)
4.
go back to reference J.A. Tichy, A porous media model for thin film lubrication. J. Tribol. 117, 16–21 (1995)CrossRef J.A. Tichy, A porous media model for thin film lubrication. J. Tribol. 117, 16–21 (1995)CrossRef
5.
go back to reference W-L. Li, Derivation of modified reynolds equation—a porous media model. J. Tribol. 121, 823–828 (1999)CrossRef W-L. Li, Derivation of modified reynolds equation—a porous media model. J. Tribol. 121, 823–828 (1999)CrossRef
6.
go back to reference W.-L. Li, H.-M. Chu, Modified reynolds equation for couple stress fluids—a porous media model. Acta Mech. 171, 189–202 (2004)CrossRef W.-L. Li, H.-M. Chu, Modified reynolds equation for couple stress fluids—a porous media model. Acta Mech. 171, 189–202 (2004)CrossRef
7.
go back to reference A.A. Elsharkawy, Effects of lubricant additives on the performance of hydrodynamically lubricated journal bearings. Tribol. Lett. 18, 63–73 (2005)CrossRef A.A. Elsharkawy, Effects of lubricant additives on the performance of hydrodynamically lubricated journal bearings. Tribol. Lett. 18, 63–73 (2005)CrossRef
8.
go back to reference J.-R. Lin, C.-C. Hwang, Linear stability analysis of finite porous journal bearings—use of the brinkman-extended darcy model. Int. J. Mech. Sci. 36, 645–658 (1994)CrossRef J.-R. Lin, C.-C. Hwang, Linear stability analysis of finite porous journal bearings—use of the brinkman-extended darcy model. Int. J. Mech. Sci. 36, 645–658 (1994)CrossRef
9.
go back to reference V. D’Agostino, A. Ruggiero, A. Senatore, Unsteady oil film forces in porous bearings: analysis of permeability effect on the rotor linear stability. Meccanica 44, 207–214 (2009)CrossRef V. D’Agostino, A. Ruggiero, A. Senatore, Unsteady oil film forces in porous bearings: analysis of permeability effect on the rotor linear stability. Meccanica 44, 207–214 (2009)CrossRef
10.
go back to reference N. Saha, B.C. Majumdar, Steady state and stability characteristics of hydrostatic two-layered porous oil journal bearings. Proc. Inst. Mech. Eng. Part J 218, 99–108 (2004)CrossRef N. Saha, B.C. Majumdar, Steady state and stability characteristics of hydrostatic two-layered porous oil journal bearings. Proc. Inst. Mech. Eng. Part J 218, 99–108 (2004)CrossRef
11.
go back to reference T.V.V.L.N. Rao, A.M.A. Rani, T. Nagarajan, F.M. Hashim, Analysis of journal bearing with double-layer porous lubricant film: influence of surface porous layer configuration. Tribol. Trans. 56(5), 841–847 (2013)CrossRef T.V.V.L.N. Rao, A.M.A. Rani, T. Nagarajan, F.M. Hashim, Analysis of journal bearing with double-layer porous lubricant film: influence of surface porous layer configuration. Tribol. Trans. 56(5), 841–847 (2013)CrossRef
12.
go back to reference T.V.V.L.N. Rao, A.M.A. Rani, M. Awang, T. Nagarajan, F.M. Hashim, Stability analysis of double porous and surface porous layer journal bearing. Tribol. Mater. Surf. Interf. 10(1), 19–25 (2016)CrossRef T.V.V.L.N. Rao, A.M.A. Rani, M. Awang, T. Nagarajan, F.M. Hashim, Stability analysis of double porous and surface porous layer journal bearing. Tribol. Mater. Surf. Interf. 10(1), 19–25 (2016)CrossRef
13.
go back to reference J.W. Lund, K.K. Thomsen, A calculation method and data for the dynamic coefficients of oil-lubricated journal bearings, in Topics in ‘Fluid Film Bearing and Rotor Bearing System Design and Optimization (ASME, New York, 1978), pp. 1–28 J.W. Lund, K.K. Thomsen, A calculation method and data for the dynamic coefficients of oil-lubricated journal bearings, in Topics in ‘Fluid Film Bearing and Rotor Bearing System Design and Optimization (ASME, New York, 1978), pp. 1–28
14.
go back to reference J.S. Rao, Rotor Dynamics (New Age International (P) Limited, New Delhi, 2009) J.S. Rao, Rotor Dynamics (New Age International (P) Limited, New Delhi, 2009)
15.
go back to reference H.G. Elrod, D.J. Vijayaraghavan, A stability analysis for liquid-lubricated bearings incorporating the effects of cavity flow: part i: classical one-dimensional journal bearing. J. Tribol. 116(2), 330–335 (1994)CrossRef H.G. Elrod, D.J. Vijayaraghavan, A stability analysis for liquid-lubricated bearings incorporating the effects of cavity flow: part i: classical one-dimensional journal bearing. J. Tribol. 116(2), 330–335 (1994)CrossRef
16.
go back to reference J.W. Lund, Review of the concept of dynamic coefficients for fluid film journal bearings. J. Tribol. 109, 37–41 (1987)CrossRef J.W. Lund, Review of the concept of dynamic coefficients for fluid film journal bearings. J. Tribol. 109, 37–41 (1987)CrossRef
Metadata
Title
Analysis of Rotor Stability Supported by Surface Porous Layered Journal Bearing
Authors
C. Shravankumar
K. Jegadeesan
T. V. V. L. N. Rao
Copyright Year
2020
DOI
https://doi.org/10.1007/978-3-030-47451-5_14

Premium Partners