Top

Published in:

2019 | OriginalPaper | Chapter

Analysis of Skeletal Muscle System Loads for the Most Optimal Positions During Lifting in Different Load Distances

Authors : Bieniek Andrzej, Szczygioł Anna, Michnik Robert, Chrzan Miłosz, Wodarski Piotr, Jurkojć Jacek

Published in: Biomechanics in Medicine and Biology

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The aim of this study was to determine the effect of the distance between load and the ankle joint on musculoskeletal system loading. The Any-Body software with the verified model was used for calculations of loads of muscoskeletal system during the initial phase of lifting. A total of 3,485 static musculoskeletal models in different positions were analyzed, out of which 13 with optimal lumbar spine loads were selected. Recived data from model calculation were knee joint reactions, L5S1 intervertebral disc reactions and sum of squares of muscle forces. Results confirm that the musculoskeletal system loading increase with growth of the load distance. However, it is worth to notice that optimal models basing on reactions in lumbar spine are not optimal in terms of knee joint loads and energy expenditure. In addition, there was also no change in the reactions observed in the literature for a load distance of about 0.4 m. It indicates that this change may be the result of the habits of the subjects but not the actual increase in efficiency. These study is an introduction to a broader analysis of the presented issue.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Trabecular Bone Microstructural FEM Analysis for Out-Of Plane Resolution Change

next chapter Strength, Flexibility and Temperature Changes During Step Aerobics Training

Arjmand, N., Ekrami, O., Shirazi-Adl, A., Plamondon, A., Parnianpour, M.: Relative performances of artificial neural network and regression mapping tools in evaluation of spinal loads and muscle forces during static lifting. J. Biomech. 46, 1454–1462 (2013). https://doi.org/10.1016/j.jbiomech.2013.02.026CrossRef

Arjmand, N., Gagnon, D., Plamondon, A., Shirazi-Adl, A., Larivière, C.: A comparative study of two trunk biomechanical models under symmetric and asymmetric loadings. J. Biomech. 43, 485–491 (2010). https://doi.org/10.1016/j.jbiomech.2009.09.032CrossRef

Arjmand, N., Plamondon, A., Shirazi-Adl, A., Larivière, C., Parnianpour, M.: Predictive equations to estimate spinal loads in symmetric lifting tasks. J. Biomech. 44, 84–91 (2011). https://doi.org/10.1016/j.jbiomech.2010.08.028CrossRef

Arjmand, N., Plamondon, A., Shirazi-Adl, A., Parnianpour, M., Larivière, C.: Predictive equations for lumbar spine loads in load-dependent asymmetric one- and two-handed lifting activities. Clin. Biomech. 27, 537–544 (2012). https://doi.org/10.1016/j.clinbiomech.2011.12.015CrossRef

Bassani, T., Stucovitz, E., Qian, Z., Briguglio, M., Galbusera, F.: Validation of the AnyBody full body musculoskeletal model in computing lumbar spine loads at L4L5 level. J Biomech. (2017). https://doi.org/10.1016/j.jbiomech.2017.04.025CrossRef

Burgess-Limerick, R., Abernethy, B.: Effect of lead distance on self-selected manual lifting technique. Int. J. Ind. Ergon. 22, 367–372 (1998). https://doi.org/10.1016/S0169-8141(97)00090-5CrossRef

Chang, C.C., Brown, D.R., Bloswick, D.S., Hsiang, S.M.: Biomechanical simulation of manual lifting using spacetime optimization. J. Biomech. 34, 527–532 (2001). https://doi.org/10.1016/S0021-9290(00)00222-0CrossRef

Ciriello, V.M.: The effects of box size, frequency and extended horizontal reach on maximum acceptable weights of lifting. Int. J. Ind. Ergon. 32, 115–120 (2003). https://doi.org/10.1016/S0169-8141(03)00045-3CrossRef

Ciriello, V.M.: The effects of container size, frequency and extended horizontal reach on maximum acceptable weights of lifting for female industrial workers. Appl. Ergon. 38, 1–5 (2007). https://doi.org/10.1016/j.apergo.2006.02.001CrossRef

10.

Colobert, B., Multon, F., Cretual, A., Delamarche, P.: Biomechanical simulation of human lifting. In: ESM 2003: 17th European Simulation Multiconference: Foundations for Successful Modelling and Simulation, pp. 318–322 (2003)

11.

Van Dieën, J.H., Hoozemans, M.J.M., Toussaint, H.M.: Stoop or squat: a review of biomechanical studies on lifting technique. Clin. Biomech. 14, 685–696 (1999)CrossRef

12.

Dreischarf, M., Rohlmann, A., Graichen, F., Bergmann, G., Schmidt, H.: In vivo loads on a vertebral body replacement during different lifting techniques. J. Biomech. 49, 890–895 (2016). https://doi.org/10.1016/j.jbiomech.2015.09.034CrossRef

13.

Faber, G.S., Chang, C.C., Kingma, I., Dennerlein, J.T.: Estimating dynamic external hand forces during manual materials handling based on ground reaction forces and body segment accelerations. J. Biomech. 46, 2736–2740 (2013). https://doi.org/10.1016/j.jbiomech.2013.07.030CrossRef

14.

Faber, G.S., Kingma, I., Bakker, A.J.M., van Dieën, J.H.: Low-back loading in lifting two loads beside the body compared to lifting one load in front of the body. J. Biomech. 42, 35–41 (2009). https://doi.org/10.1016/j.jbiomech.2008.10.013CrossRef

15.

Fogleman, M., Smith, J.L.: The use of biomechanical measures in the investigation of changes in lifting strategies over extended periods. Int. J. Ind. Ergon. 16, 57–71 (1995). https://doi.org/10.1016/0169-8141(94)00087-JCrossRef

16.

Gagnon, D., Larivière, C., Loisel, P.: Comparative ability of EMG, optimization, and hybrid modelling approaches to predict trunk muscle forces and lumbar spine loading during dynamic sagittal plane lifting. Clin. Biomech. 16, 359–372 (2001). https://doi.org/10.1016/S0268-0033(01)00016-XCrossRef

17.

Guzik-Kopyto, A., Michnik, R., Wodarski, P., Chuchnowska, I.: Determination of loads in the joints of the upper limb during activities of daily living. In: Advances in Intelligent Systems and Computing, pp. 99–108 (2016). https://doi.org/10.1007/978-3-319-39904-1_9

18.

Gzik, M., Wodarski, P., Jurkojć, J., Michnik, R., Bieniek, A.: Interactive system of enginering support of upper limb diagnosis. In: Advances in Intelligent Systems and Computing, pp. 115–123 (2017)

19.

Hu, B., Ma, L., Zhang, W., Salvendy, G., Chablat, D., Bennis, F.: Predicting real-world ergonomic measurements by simulation in a virtual environment. Int. J. Ind. Ergon. 41, 64–71 (2011). https://doi.org/10.1016/j.ergon.2010.001CrossRef

20.

Hwang, S., Kim, Y., Kim, Y.: Lower extremity joint kinetics and lumbar curvature during squat and stoop lifting. BMC Musculoskelet. Disord. (2009). https://doi.org/10.1186/1471-2474-10-15

21.

Jin, S., Mirka, G.A.: The effect of a lower extremity kinematic constraint on lifting biomechanics. Appl. Ergon. 42, 867–872 (2011). https://doi.org/10.1016/j.apergo.2011.02.003CrossRef

22.

Jurkojć, J., Wodarski, P., Michnik, R., Nowakowska, K.: The upper limb motion deviation index: a new comprehensive index of upper limb motion pathology. Acta Bioeng. Biomech. 19, 175–185 (2016). https://doi.org/10.5277/ABB-00698-2016-02CrossRef

23.

Katsuhira, J., Matsudaira, K., Iwakiri, K., Kimura, Y., Ohashi, T., Ono, R., Sugita, S., Fukuda, K., Abe, S., Maruyama, H.: Effect of mental processing on low back load while lifting an object. Spine 38, E832–E839 (2013). https://doi.org/10.1097/BRS.0b013e31829360e5. (Phila Pa 1976)CrossRef

24.

Lee, J., Nussbaum, M.A.: Experienced workers may sacrifice peak torso kinematics/kinetics for enhanced balance/stability during repetitive lifting. J. Biomech. 46, 1211–1215 (2013). https://doi.org/10.1016/j.jbiomech.2013.01.011CrossRef

25.

Michnik, R., Jurkojć, J., Wodarski, P., Gzik, M., Bieniek, A.: The influence of the scenery and the amplitude of visual disturbances in the virtual reality on the maintaining the balance. Arch. Budo 10, 133–140 (2014)

26.

Michnik, R., Jurkojć, J., Wodarski, P., Gzik, M., Jochymczyk-Woźniak, K., Bieniek, A.: The influence of frequency of visual disorders on stabilographic parameters. Acta Bioeng. Biomech. 18, 25–33 (2016). https://doi.org/10.5277/ABB-00201-2014-04CrossRef

27.

Mohammadi, Y., Arjmand, N., Shirazi-Adl, A.: Comparison of trunk muscle forces, spinal loads and stability estimated by one stability- and three EMG-assisted optimization approaches. Med. Eng. Phys. 37, 792–800 (2015). https://doi.org/10.1016/j.medengphy.2015.05.018CrossRef

28.

Nowakowska, K., Gzik, M., Michnik, R., Myśliwiec, A., Jurkojć, J., Suchoń, S., Burkacki, M.: Innovations in Biomedical Engineering. Springer, Cham (2017)

29.

Plamondon, A., Delisle, A., Bellefeuille, S., Denis, D., Gagnon, D., Larivière, C., IRSST MMH Research Group: Lifting strategies of expert and novice workers during a repetitive palletizing task. Appl. Ergon. 45, 471–481 (2014). https://doi.org/10.1016/j.apergo.2013.06.008CrossRef

30.

Plamondon, A., Larivière, C., Denis, D., St-Vincent, M., Delisle, A.: Sex differences in lifting strategies during a repetitive palletizing task. Appl. Ergon. 45, 1558–1569 (2014). https://doi.org/10.1016/j.apergo.2014.05.005CrossRef

31.

Rajaee, M.A., Arjmand, N., Shirazi-Adl, A., Plamondon, A., Schmidt, H.: Comparative evaluation of six quantitative lifting tools to estimate spine loads during static activities. Appl. Ergon. 48, 22–32 (2015). https://doi.org/10.1016/j.apergo.2014.11.002CrossRef

32.

Schipplein, O.D., Reinsel, T.E., Andersson, G.B., Lavender, S.A.: The influence of initial horizontal weight placement on the loads at the lumbar spine while lifting. Spine 20, 1895–1898 (1995). https://doi.org/10.1097/00007632-199509000-00010. (Phila Pa 1976)CrossRef

33.

Visser, S., Faber, G.S., Hoozemans, M.J.M., van der Molen, H.F., Kuijer, P.P.F.M., Frings-Dresen, M.H.W., van Dieën, J.H.: Lumbar compression forces while lifting and carrying with two and four workers. Appl. Ergon. 50, 56–61 (2015). https://doi.org/10.1016/j.apergo.2015.02.007CrossRef

Title: Analysis of Skeletal Muscle System Loads for the Most Optimal Positions During Lifting in Different Load Distances
Authors: Bieniek Andrzej
Szczygioł Anna
Michnik Robert
Chrzan Miłosz
Wodarski Piotr
Jurkojć Jacek
Publisher: Springer International Publishing
Book: Biomechanics in Medicine and Biology
Print ISBN: 978-3-319-97285-5

Electronic ISBN: 978-3-319-97286-2

Copyright Year: 2019
DOI: https://doi.org/10.1007/978-3-319-97286-2_20

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner