Top

Published in:

2022 | OriginalPaper | Chapter

Antiwear Coatings for Multi-material Composite Hydraulic Cylinder. A Tribological Study

Authors : Marek Lubecki, Michał Stosiak, Tadeusz Leśniewski

Published in: TRANSBALTICA XII: Transportation Science and Technology

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Due to many advantages, composite materials are more and more widely used in the production of high-strength machine parts. An example of such an element is a hydraulic cylinder. Conventional hydraulic cylinders are made of steel, which, after appropriate treatment, ensures satisfactory conditions of cooperation between the inner surface of the cylinder and the piston seal. In the case of a cylinder made of composite material, it is necessary to check the tribological properties of the material surface and the potential selection of a material to act as an internal liner. Four materials were selected in the study - epoxy resin, polyurethane resin, CFRP and a commercial material used for sliding elements. Ball-on-disk tests were carried out and wear traces were observed using a non-contact profilometer.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Assessment and Predictive Modelling of Transport and Operating Condition of Aerodrome Pavement: A Case Study of Zaporizhzhia International Airport Runway

next chapter Crash Test for the Evaluation of Vehicle Safety

Kaw, A.K.: Mechanics of Composite Materials. CRC Press, Boca Raton (2005)CrossRef

Kim, B., Kim, B., Kim, J., Joe, C.: Study on the development of composite CNG pressure vessels. Cryogenics (Guildf). 38, 131–134 (1998). https://doi.org/10.1016/S0011-2275(97)00123-9CrossRef

Banerjee, S., Messidoro, P., Ferrarese, A., et al.: Structural health monitoring technology for aerospace composite propellant tank. In: ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, ASMEDC, vol. 2, pp. 563–570 (2011)

Baragetti, S., Terranova, A.: Limit load evaluation of hydraulic actuators. Int. J. Mater. Prod. Technol. 14, 50 (1999). https://doi.org/10.1504/IJMPT.1999.036260CrossRef

Marczewska, I., Bednarek, T., Marczewski, A., et al.: Practical fatigue analysis of hydraulic cylinders and some design recommendations. Int. J. Fatigue. 28, 1739–1751 (2006). https://doi.org/10.1016/j.ijfatigue.2006.01.003CrossRef

Mantovani, S.: Feasibility analysis of a double-acting composite cylinder in high-pressure loading conditions for fluid power applications. Appl. Sci. 10, 826 (2020). https://doi.org/10.3390/app10030826CrossRef

Solazzi, L.: Design and experimental tests on hydraulic actuator made of composite material. Compos. Struct. 232,111544 (2020). https://doi.org/10.1016/j.compstruct.2019.111544

Krawczyk, J.: Functional verification and performance studies of the gerotor pump made of plastics. In: Stryczek, J., Warzyńska, U. (eds.) NSHP 2020. LNME, pp. 386–395. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-59509-8_35CrossRef

Chihai, R., Ungureanu, C., Cojan, A., et al.: Organic modified epoxy resin. tribologic aspects. In: Padgurskas, J. (ed.) The 10th International Conference BALTTRIB’2019 14–16 November 2019. Kaunas (2019)

10.

Majdič, F., Strmčnik, E.: Tribological aspects of water hydraulics. In: SERBIATRIB ’19 16 th International Conference on Tribology . Kragujevac (2019)

11.

Li, G., Xu, H., Wan, H., et al.: Tribological properties and corrosion resistance of epoxy resin‐polytetrafluoroethylene bonded solid lubricating coating filled with flake aluminum. J. Appl. Polym. Sci. 138, 51003 (2021). https://doi.org/10.1002/app.51003

12.

Zhang, E., Gao, F., Fu, R., et al.: Tribological Behavior of Phenolic Resin-Based Friction Composites Filled with Graphite. Materials (Basel). 14, 742 (2021). https://doi.org/10.3390/ma14040742

13.

Kujawa, M., Kowalewski, P., Wieleba, W.: The Influence of Deformation under Tension on Some Mechanical and Tribological Properties of High-Density Polyethylene. Polymers (Basel) 11, 1429 (2019). https://doi.org/10.3390/polym11091429

14.

Lubecki, M., Stosiak, M., Leśniewski, T.: Comparative studies of tribological properties of selected polymer resins for use in hydraulic systems. Tribologia. 288, 31–37 (2019). https://doi.org/10.5604/01.3001.0013.7764CrossRef

Title: Antiwear Coatings for Multi-material Composite Hydraulic Cylinder. A Tribological Study
Authors: Marek Lubecki
Michał Stosiak
Tadeusz Leśniewski
Publisher: Springer International Publishing
Book: TRANSBALTICA XII: Transportation Science and Technology
Print ISBN: 978-3-030-94773-6

Electronic ISBN: 978-3-030-94774-3

Copyright Year: 2022
DOI: https://doi.org/10.1007/978-3-030-94774-3_18

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partner