Top

Metallurgist

Published in:

01-07-2011

Aspects of the practical use of VNIIMT methodology to optimize the heat-engineering schemes employed on conveyor-type roasting machines

Author: A. A. Butkarev

Published in: Metallurgist | Issue 3-4/2011

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Results are presented from practical application of VNIIMT methodology for optimizing the heat-engineering schemes of conveyor-type roasting machines at different combines. Technical innovations that will improve the performance indices of these machines are presented. One example cited is the modernization of roasting machine No. 5 at the Sokolovo-Sarbaiskii Mining-Beneficiation Association, which increased the productivity of the machine by 24.6%, reduced the consumption of natural gas by more than half, and lowered electricpower consumption on the draft equipment by 21.3%.

previous article New methods of increasing the activity of limestone in preparation for sintering

next article Phosphorus, lead, and arsenic in blast-furnace smelting

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

A. A. Butkarev, “Methodology for integrated study and optimization of the heat-engineering schemes of conveyortype roasting machines,” Stal, No. 4, 2–9 (2008).

A. A. Butkarev, “Methodology for studying and optimizing the design and operating parameters in the heat-engineering schemes of conveyor-type roasting machines used to heat-treat iron ore pellets and its use to increase machine productivity and reduce fuel and electric-power consumption,” in: Furnaces and Energy-Saving Technologies in Metallurgy and Machine Construction: Proc. IV Int. Sci.-Techn. Conf., April 3–4, 2008, MISiS, Moscow (2008), pp. 90–101.

A. P. Butkarev, A. A. Butkarev, A. A. Borodin, et al., “Use of modernized OK-306 roasting machines at the Lebedinskii Mining-Concentration Combine and ways of improving them to make the production process more efficient,” Stal, No. 3, 7–10 (2005).

A. A. Butkarev, A. P. Butkarev, and S. N. Zhilin, “Ways of increasing the productivity of OK-306 roasting machine No. 1 at the Lebedinskii Mining-Concentration Combine in the production of pellets for metallization,” Stal, No. 11, 58–62 (2007).

A. A. Butkarev and A. P. Butkarev, “Optimization of the parameters of pellet heat-treatment on conveyor-type machines,” Stal, No. 4, 10–15 (2000).

A. A. Butkarev, “Principles of the development of optimum heat-engineering schemes for roasting machines on the basis of the criterion of minimizing the consumption of electric power,” Stal, No. 9, 8–14 (2007).

N. N. Kopot, A. B. Vorobiev, S. A. Goncharov, et al., “Comparative analysis of the heat-engineering schemes of modern conveyor-type roasting machines,” Stal, No. 3, 8–13 (2010).

A. A. Butkarev,A. P. Butkarev,V. N. Ashcheulov, et al., “Optimization of the parameters of roasting machines Nos. 1–8 at the SSGPO,” Stal, No. 12, 2–4 (2007).

A. A. Butkarev, A. P. Butkarev, R. A. Urdubaev, et al., “Modernization of an OK-124 roasting machine,” Stal, No. 3, 14–15 (2010).

10.

A. A. Butkarev, A. P. Butkarev, B. A. Zinchuk, et al., “Devising technical measures to increase the productivity of a roating machine made by the company Lurgi,” Stal, No. 6, 3–7 (2007).

11.

A. A. Butkarev, “Evaluating the effect of a subsystem that stabilizes the parameters of the automated process control system on the performance indices of conveyor-type roasting machines,” in: Academy of Engineering Sciences of the Urals: Scientific-Technical and Organizational Activities at the New Millenium: Symposium. Vol. 5. Instrument Design and Information Systems for Monitoring, Diagnostics, and Control, UrO AIN RF, Ekaterinburg (2007), pp. 91–96.

12.

A. P. Butkarev, G. M. Maizel, V. G. Lisienko, et al., “Functional structure of an automated system for controlling pellet production on a conveyor-type OK-315A roasting machine at the Lebedinskii Mining-Concentration Combine,” in: Science and Engineering – The Twenty-First Century: Proc. 1st Sci.-Techn. Conf. UrO AIN RF, Ekaterinburg, UrO AIN RF (1995), pp. 68–69.

Title: Aspects of the practical use of VNIIMT methodology to optimize the heat-engineering schemes employed on conveyor-type roasting machines
Author: A. A. Butkarev
Publication date: 01-07-2011
Publisher: Springer US
Published in: Metallurgist / Issue 3-4/2011
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-011-9417-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2011

Scientific foundation for the production of carbothermal manganese alloys

Fracture of the materials and elements of steel structures

Production of steel of grade EI654-Sh with a limitation of the ferrite content

Investigation of the completeness of specimen degassing in an analysis of the hydrogen content of aluminum alloys

Promising raw materials for the production of pulverized-coal fuel

Premium Partners