Top

Metallurgist

Published in:

01-11-2015

Assessing the Consequences of the Softening of Metal During Hot-Working by Using the Software Package QForm V8

Authors: A. A. Ershov, Yu. N. Loginov, S. L. Demakov

Published in: Metallurgist | Issue 7-8/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This article examines the effect of the strain-hardening parameters of a deformable material on the strain distribution in a product obtained by upsetting. The study was conducted with the use of materials having different types of strain-hardening curves. Results obtained by modeling and an experiment show the uniformity of the strain distribution.

previous article Principles of the Development and Introduction of an Automated Process Control System for Blast-Furnace Smelting at the Magnitogorsk Metallurgical Combine

next article Possibility of Using Complexing Reagent for Processing Spent Alkaline Batteries

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Yu. N. Loginov and V. V. Kotov, “Modeling the pressing of a tubular semifinished product of a titanium alloy in the program QFORM 2D/3D,” Kuzn.-Shtamp. Proizv. Obrab. Mater. Davl., No. 12, 36–40 (2010).

A. A. Ershov, V. V. Kotov, and Yu. M. Loginov, “Innovations in the design of pressing technology: use of the package QFORM-EXTRUSION,” Innovations in Materiology and Metallurgy, UrFU, Ekaterinburg (2012), Pt. 2, pp. 73–83.

A. A. Ershov, V. V. Kotov, and Yu. N. Loginov, “Capabilities of QFORM-EXTRUSION based on an example of the extrusion of complex shapes,” Metallurg, No. 10, 32–37 (2011).

Yu. N. Loginov and A. A. Ershov, “Using QFORM software to model the formation of a pull crack during pressing,” Kuzn.-Shtamp. Proizv. Obrab. Mater. Davl., No. 7, 42–46 (2013).

Yu. N. Loginov and V. V. Kotov, The Finite-Element Method in Describing the Stress-Strain State in the Pressing Operation, UrFU, Ekaterinburg (2010).

Yu. N. Loginov, “Effect of the angle of the working zone of the draw plate on the stress state in the deformation zone during the drawing of copper,” Tsvetn. Met., No. 3, 94–97 (2010).

Yu. N. Loginov, B. I. Kamenetskii, and G. I. Studenok, “Modeling the strain state of a circular plate during drawing,” Izv. Vyssh. Uchebn. Zaved. Chern. Metall., No. 3, 26–28 (2006).

Yu. N. Loginov and L. V. Antonenko, “Study of the stress-strain state for the premature formation of longitudinal cracks in pressed tubes,” Tsvetn. Met., No. 5, 119–122 (2010).

Yu. N. Loginov and O. F. Degtyareva, “Effect of deformation rate on the structural strain-hardening of pressed tubes made of aluminum alloy 6061,” Tekhnol. Legk. Splavov, No. 4, 123–127 (2007).

10.

Yu. N. Loginov and A. A. Ershov, “Effect of the form of the strain-hardening curve on strain localization in the upsetting of titanium semifinished products,” Titan, No. 1 (35), 22–28 (2012).

Title: Assessing the Consequences of the Softening of Metal During Hot-Working by Using the Software Package QForm V8
Authors: A. A. Ershov
Yu. N. Loginov
S. L. Demakov
Publication date: 01-11-2015
Publisher: Springer US
Published in: Metallurgist / Issue 7-8/2015
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-015-0155-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7-8/2015

Increasing the Service Life of Large Rolling-Mill Rolls by Using the Reserve Hardenability of the Steel

Developing and Studying Methods and Equipment for Rolling Collector Profiles Made of Alloy BrKd1

Studies of the Hydroaerodynamic Characteristics of a Radial-Axial Lance

High-Temperature Sulfuric Acid Converter Matte Pressure Leaching

Technology for Making Circular and Hexagonal Tubes of Ferritic-Martensitic Steel EP450U-Sh for Fast-Neutron Reactors

Effectiveness of Using High Gas Pressure in a Blast Furnace as a Means of Intensifying the Smelting Operation

Premium Partners