Top

Microsystem Technologies

Published in:

09-08-2016 | Technical Paper

Buckling analysis of graphene sheets using nonlocal isogeometric finite element method for NEMS applications

Authors: Ahmad Soleimani, Mohammad Hasan Naei, Mahmoud Mosavi Mashhadi

Published in: Microsystem Technologies | Issue 7/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this study, an isogeometric finite element approach (IGA) based on non-uniform rational B-splines (NURBS) basis function in combination with the first order shear deformation plate theory (FSDT) for buckling analysis of graphene sheet under uniaxial and biaxial compressions is investigated. To study the small scale effects on buckling analysis, the nonlocal elasticity theory is applied. Nonlocal governing equations of motion for the single-layered graphene sheet are derived from the principle of virtual displacements. The properties of graphene sheet are considered as isotropic and orthotropic plates. Numerical results of critical buckling loads are presented, and compared with other available results to reveal the efficiency and accuracy of the present IGA approach. At the end some numerical results are presented to study the effects of nonlocal parameter, different boundary conditions, different material properties, side length and aspect ratio on critical buckling loads.

previous article Sidewall spacer layer engineering for improvement of analog/RF performance of nanoscale double-gate junctionless transistors

next article Vanadium oxide thermal microsensor integrated in a microfluidic chip for detecting cholesterol and glucose concentrations

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Aksencer T, Aydogdu M (2011) Levy type solution method for vibration and buckling of nanoplates using nonlocal elasticity theory. Physica E 43:954–959CrossRef

Anjomshoa A, Shahidi AR, Hassani B, Jomehzadeh E (2014) Finite element buckling analysis of multi-layered graphene sheets on elastic substrate based on nonlocal elasticity theory. Appl Math Model 38:5934–5955MathSciNetCrossRef

Ansari R, Sahmani S (2013) Prediction of biaxial buckling behavior of single-layered graphene sheets based on nonlocal plate models and molecular dynamics simulations. Appl Math Model 37:7338–7351MathSciNetCrossRef

Ansari R, Rajabiehfard R, Arash B (2010) Nonlocal finite element model for vibrations of embedded multi-layered graphene sheets. Comput Mater Sci 49:831–838CrossRef

Aristodemo M (1985) A high-continuity finite element model for two-dimensional elastic problems. Comput Struct 21:987–993CrossRefMATH

Bilotta A, Formica G, Turco E (2010) Performance of a high-continuity finite element in three-dimensional elasticity. Int J Numer Methods Biomed Eng 26:1155–1175CrossRefMATH

Cazzani A, Malagù M, Turco E (2014) Isogeometric analysis of plane-curved beams. Math Mech Solids 21(5):562–577MathSciNetCrossRef

Cazzani A, Malagù M, Turco E (2016a) Isogeometric analysis: a powerful numerical tool for the elastic analysis of historical masonry arches. Contin Mech Thermodyn 28:139–156MathSciNetCrossRefMATH

Cazzani A, Malagù M, Turco E, Stochino F (2016b) Constitutive models for strongly curved beams in the frame of isogeometric analysis. Math Mech Solids 21(2):182–209MathSciNetCrossRefMATH

Cazzani A, Stochino F, Turco E (2016c) An analytical assessment of finite element and isogeometric analyses of the whole spectrum of Timoshenko beams. ZAMM J Appl Math Mech/Zeitschrift für Angewandte Mathematik und Mechanik. doi:10.1002/zamm.201500280 MATH

Cottrell JA, Hughes TJR, Reali A (2007) Studies of refinement and continuity in isogeometric structural analysis. Comput Methods Appl Mech Eng 196:4160–4183CrossRefMATH

Cottrell JA, Hughes TJ, Bazilevs Y (2009) Isogeometric analysis: toward integration of CAD and FEA. Wiley, New YorkCrossRef

Craighead HG (2000) Nanoelectromechanical systems. Science 290:1532–1535CrossRef

Cuomo M, Contrafatto L, Greco L (2014) A variational model based on isogeometric interpolation for the analysis of cracked bodies. Int J Eng Sci 80:173–188MathSciNetCrossRef

Daneshmehr A, Rajabpoor A, Pourdavood M (2014) Stability of size dependent functionally graded nanoplate based on nonlocal elasticity and higher order plate theories and different boundary conditions. Int J Eng Sci 82:84–100CrossRef

Eringen AC (1972a) Nonlocal polar elastic continua. Int J Eng Sci 10:1–16MathSciNetCrossRefMATH

Eringen AC (1972b) Theory of micromorphic materials with memory. Int J Eng Sci 10:623–641CrossRefMATH

Eringen AC (1983) On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves. J Appl Phys 54:4703–4710CrossRef

Eringen AC (2002) Nonlocal continuum field theories. Springer Science & Business Media, New YorkMATH

Farajpour A, Danesh M, Mohammadi M (2011) Buckling analysis of variable thickness nanoplates using nonlocal continuum mechanics. Physica E 44:719–727CrossRef

Ghadiri M, Shafiei N (2015) Nonlinear bending vibration of a rotating nanobeam based on nonlocal Eringen’s theory using differential quadrature method. Microsyst Technol. doi:10.1007/s00542-015-2662-9

Ghadiri M, Shafiei N, Safarpour H (2016) Influence of surface effects on vibration behavior of a rotary functionally graded nanobeam based on Eringen’s nonlocal elasticity. Microsyst Technol. doi:10.1007/s00542-016-2822-6

Greco L, Cuomo M (2013) B-spline interpolation of Kirchhoff–Love space rods. Comput Methods Appl Mech Eng 256:251–269MathSciNetCrossRefMATH

Greco L, Cuomo M (2014) An implicit G1 multi patch B-spline interpolation for Kirchhoff–Love space rod. Comput Methods Appl Mech Eng 269:173–197CrossRefMATH

Guo Y, Ruess M, Gürdal Z (2014) A contact extended isogeometric layerwise approach for the buckling analysis of delaminated composites. Compos Struct 116:55–66CrossRef

Hughes TJR, Cottrell JA, Bazilevs Y (2005) Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement. Comput Methods Appl Mech Eng 194:4135–4195MathSciNetCrossRefMATH

Jalali S, Naei M, Pugno N (2015) A mixed approach for studying size effects and connecting interactions of planar nano structures as resonant mass sensors. Microsyst Technol 21:2375–2386CrossRef

Jari H, Atri H, Shojaee S (2015) Nonlinear thermal analysis of functionally graded material plates using a NURBS based isogeometric approach. Compos Struct 119:333–345CrossRef

Kapoor H, Kapania R (2012) Geometrically nonlinear NURBS isogeometric finite element analysis of laminated composite plates. Compos Struct 94:3434–3447CrossRef

Karimi M, Mirdamadi HR, Shahidi AR (2015) Shear vibration and buckling of double-layer orthotropic nanoplates based on RPT resting on elastic foundations by DQM including surface effects. Microsyst Technol. doi:10.1007/s00542-015-2744-8

Lam D, Yang F, Chong A, Wang J, Tong P (2003) Experiments and theory in strain gradient elasticity. J Mech Phys Solids 51:1477–1508CrossRefMATH

Le-Manh T, Lee J (2014) Postbuckling of laminated composite plates using NURBS-based isogeometric analysis. Compos Struct 109:286–293CrossRef

Le-Manh T, Luu-Anh T, Lee J (2016) Isogeometric analysis for flexural behavior of composite plates considering large deformation with small rotations. Mech Adv Mater Struct 23:328–336CrossRef

Malagu M, Benvenuti E, Simone (2012) A Finite element and b-spline methods for one-dimensional non-local elasticity. In: ECCOMAS 2012: 6th European Congress on computational methods in applied sciences and engineering, September 2012, Vienna University of Technology, Vienna, Austria

Mohammad-Abadi M, Daneshmehr A (2014) Size dependent buckling analysis of microbeams based on modified couple stress theory with high order theories and general boundary conditions. Int J Eng Sci 74:1–14MathSciNetCrossRef

Mohammadi M, Farajpour A, Goodarzi M (2014) Numerical study of the effect of shear in-plane load on the vibration analysis of graphene sheet embedded in an elastic medium. Comput Mater Sci 82:510–520CrossRef

Murmu T, Pradhan S (2009) Buckling of biaxially compressed orthotropic plates at small scales. Mech Res Commun 36:933–938CrossRefMATH

Naderi A, Saidi AR (2014) Nonlocal postbuckling analysis of graphene sheets in a nonlinear polymer medium. Int J Eng Sci 81:49–65CrossRef

Narendar S, Gopalakrishnan S (2012) Scale effects on buckling analysis of orthotropic nanoplates based on nonlocal two-variable refined plate theory. Acta Mech 223:395–413MathSciNetCrossRefMATH

Natarajan S, Chakraborty S, Thangavel M, Bordas S, Rabczuk T (2012) Size-dependent free flexural vibration behavior of functionally graded nanoplates. Comput Mater Sci 65:74–80CrossRef

Phadikar J, Pradhan S (2010) Variational formulation and finite element analysis for nonlocal elastic nanobeams and nanoplates. Comput Mater Sci 49:492–499CrossRef

Piegl L, Tiller W (2012) The NURBS book. Springer Science & Business Media, New YorkMATH

Pradhan S (2009) Buckling of single layer graphene sheet based on nonlocal elasticity and higher order shear deformation theory. Phys Lett A 373:4182–4188CrossRefMATH

Pradhan S, Kumar A (2010) Vibration analysis of orthotropic graphene sheets embedded in Pasternak elastic medium using nonlocal elasticity theory and differential quadrature method. Comput Mater Sci 50:239–245CrossRef

Pradhan S, Murmu T (2009) Small scale effect on the buckling of single-layered graphene sheets under biaxial compression via nonlocal continuum mechanics. Comput Mater Sci 47:268–274CrossRef

Pradhan S, Murmu T (2010) Small scale effect on the buckling analysis of single-layered graphene sheet embedded in an elastic medium based on nonlocal plate theory. Physica E 42:1293–1301CrossRef

Reddy JN (2007) Nonlocal theories for bending, buckling and vibration of beams. Int J Eng Sci 45:288–307CrossRefMATH

Samaei A, Abbasion S, Mirsayar M (2011) Buckling analysis of a single-layer graphene sheet embedded in an elastic medium based on nonlocal Mindlin plate theory. Mech Res Commun 38:481–485CrossRefMATH

Shojaee S, Valizadeh N, Izadpanah E, Bui T, Vu T-V (2012) Free vibration and buckling analysis of laminated composite plates using the NURBS-based isogeometric finite element method. Compos Struct 94:1677–1693CrossRef

Thai CH, Nguyen-Xuan H, Nguyen-Thanh N, Le TH, Nguyen-Thoi T, Rabczuk T (2012) Static, free vibration, and buckling analysis of laminated composite Reissner-Mindlin plates using NURBS-based isogeometric approach. Int J Numer Methods Eng 91:571–603MathSciNetCrossRefMATH

Toupin RA (1962) Elastic materials with couple-stresses. Arch Ration Mech Anal 11:385–414MathSciNetCrossRefMATH

Tran LV, Ferreira AJM, Nguyen-Xuan H (2013a) Isogeometric analysis of functionally graded plates using higher-order shear deformation theory. Compos B Eng 51:368–383CrossRef

Tran LV, Thai CH, Nguyen-Xuan H (2013b) An isogeometric finite element formulation for thermal buckling analysis of functionally graded plates. Finite Elem Anal Des 73:65–76CrossRef

Tran LV, Lee J, Nguyen-Van H, Nguyen-Xuan H, Wahab MA (2015) Geometrically nonlinear isogeometric analysis of laminated composite plates based on higher-order shear deformation theory. Int J Non-Linear Mech 72:42–52CrossRef

Tran LV, Phung-Van P, Lee J, Wahab MA, Nguyen-Xuan H (2016) Isogeometric analysis for nonlinear thermomechanical stability of functionally graded plates. Compos Struct 140:655–667CrossRef

Wang X, Zhu X, Hu P (2015) Isogeometric finite element method for buckling analysis of generally laminated composite beams with different boundary conditions. Int J Mech Sci 104:190–199CrossRef

Yu TT, Yin S, Bui TQ, Hirose S (2015) A simple FSDT-based isogeometric analysis for geometrically nonlinear analysis of functionally graded plates. Finite Elem Anal Des 96:1–10CrossRef

Title: Buckling analysis of graphene sheets using nonlocal isogeometric finite element method for NEMS applications
Authors: Ahmad Soleimani
Mohammad Hasan Naei
Mahmoud Mosavi Mashhadi
Publication date: 09-08-2016
Publisher: Springer Berlin Heidelberg
Published in: Microsystem Technologies / Issue 7/2017
Print ISSN: 0946-7076
Electronic ISSN: 1432-1858
DOI: https://doi.org/10.1007/s00542-016-3098-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2017

Design and experimental validation of a linear piezoelectric micromotor for dual-slider positioning

Facile fabrication of helical microfluidic channel based on rope coiling effect

Polymer bonding of GaN crystal layer on silicon substrate for micro mechanical resonator applications

Design of a micro manipulation device for cell microinjection

A WR-3 dual-band bandpass filter based on parallel coupling structure

Reducing electrowetting-on-dielectric actuation voltage using a novel electrode shape and a multi-layer dielectric coating