Skip to main content
Top
Published in: Journal of Material Cycles and Waste Management 2/2015

01-04-2015 | ORIGINAL ARTICLE

Characterization of green building materials manufactured from canola oil and natural zeolite

Author: Figen Balo

Published in: Journal of Material Cycles and Waste Management | Issue 2/2015

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The main objective of this paper was to evaluate the feasibility and performance of building materials similar to gas concrete using epoxidized canola oil (ECO), fly ash (FA), natural clay (C) and natural zeolite (Z). In this study, ECO, C, FA [wastes produced in Afşin-Elbistan (Kahramanmaraş, Turkey) thermal power station] and Z are used for producing building material. FA, C and Z were used as raw materials for producing the samples. ECO was used for binding. Density, thermal conductivity and compressive-tensile strength were decreased with the increase of ECO, FA and Z at all levels of replacements. Moreover, increasing process temperatures decreased density, thermal conductivity and compressive-tensile strength. Abrasion loss and water absorption were increased with the increase of ECO, FA, Z ratios and process temperatures.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Canpolat F, Yılmaz K, Kose MM, Sumer M, Yurdusev MA (2004) Use of zeolite, coal bottom ash and fly ash as replacement materials in cement production. Cem Concr Res 34(5):731–735CrossRef Canpolat F, Yılmaz K, Kose MM, Sumer M, Yurdusev MA (2004) Use of zeolite, coal bottom ash and fly ash as replacement materials in cement production. Cem Concr Res 34(5):731–735CrossRef
2.
go back to reference Majko RM, Pistilli MF (1984) Optimizing the amount of class C fly ash in the concrete mixture. Cem Concr Aggreg 6:105–109CrossRef Majko RM, Pistilli MF (1984) Optimizing the amount of class C fly ash in the concrete mixture. Cem Concr Aggreg 6:105–109CrossRef
3.
go back to reference Touttanji HA, Bayası Z (1999) Effect of curing procedures on the properties of silica fumes concrete. Cem Concr Res 29:497–501CrossRef Touttanji HA, Bayası Z (1999) Effect of curing procedures on the properties of silica fumes concrete. Cem Concr Res 29:497–501CrossRef
4.
go back to reference Kula I, Olgun A, Erdoğan Y, Sevinc V (2001) Effects of colemanite waste, coal bottom ash and fly ash on the properties of cement. Cem Concr Res 31:491–494CrossRef Kula I, Olgun A, Erdoğan Y, Sevinc V (2001) Effects of colemanite waste, coal bottom ash and fly ash on the properties of cement. Cem Concr Res 31:491–494CrossRef
5.
go back to reference Demirbas A (1996) Optimizing the physical and technological properties of cements additives in concrete mixture. Cem Concr Res 26:1737–1744CrossRef Demirbas A (1996) Optimizing the physical and technological properties of cements additives in concrete mixture. Cem Concr Res 26:1737–1744CrossRef
6.
go back to reference Djuric M, Ranogajee J, Omarjan R, Miletic S (1996) Sulfate corrosion of the Portland cement-pure and blended with 30 % of fly ash. Cem Concr 26:1295–1300CrossRef Djuric M, Ranogajee J, Omarjan R, Miletic S (1996) Sulfate corrosion of the Portland cement-pure and blended with 30 % of fly ash. Cem Concr 26:1295–1300CrossRef
7.
go back to reference Palomo A, Grutzeek MW, Blanco MT (1999) Alkali-activated fly ashes, a cement for future. Cem Concr Res 29:983–987CrossRef Palomo A, Grutzeek MW, Blanco MT (1999) Alkali-activated fly ashes, a cement for future. Cem Concr Res 29:983–987CrossRef
8.
go back to reference Alloway BJ, Ayres DC (1993) Chemical principles of environmental pollution, 1st edn. Blackie Academic & Professional, Chapman & Hall, United KingdomCrossRef Alloway BJ, Ayres DC (1993) Chemical principles of environmental pollution, 1st edn. Blackie Academic & Professional, Chapman & Hall, United KingdomCrossRef
9.
go back to reference Pedersen AJ (2002) Electrodialytic removal of heavy metals from fly ashes. PhD thesis, Technical University of Denmark Pedersen AJ (2002) Electrodialytic removal of heavy metals from fly ashes. PhD thesis, Technical University of Denmark
10.
go back to reference Alkaya D (2002), Uçucu Kül Katkısının Dolgu Zeminlerin Stabilitesine Etkisi, Turkey Alkaya D (2002), Uçucu Kül Katkısının Dolgu Zeminlerin Stabilitesine Etkisi, Turkey
11.
go back to reference Carlson CL, Andriano DC (1993) Environmental impacts of coal combustion residues. J Environ Qual 22:227–247CrossRef Carlson CL, Andriano DC (1993) Environmental impacts of coal combustion residues. J Environ Qual 22:227–247CrossRef
12.
go back to reference Ferreira C, Ribeiro A, Ottosen L (2003) Possible applications for municipal solid waste fly ash. J Hazard Mater B 96:201–216CrossRef Ferreira C, Ribeiro A, Ottosen L (2003) Possible applications for municipal solid waste fly ash. J Hazard Mater B 96:201–216CrossRef
13.
go back to reference Liu ZS, Erhan SZ, Xu J, Calvert D (2002) Development of soybean oil-based composites by solid freeform fabrication method: epoxidized soybean oil with bis or polyalkyleneamine curing agents system. J Appl Polym Sci 85(10):2100–2107CrossRef Liu ZS, Erhan SZ, Xu J, Calvert D (2002) Development of soybean oil-based composites by solid freeform fabrication method: epoxidized soybean oil with bis or polyalkyleneamine curing agents system. J Appl Polym Sci 85(10):2100–2107CrossRef
14.
go back to reference Liu ZS, Erhan SZ, Calvert D (2007) Solid freeform fabrication of epoxidized soybean oil/epoxy composite with bis or polyalkyleneamine curing agents. Compos Part A Appl Sci Manuf 38(1):87–93CrossRef Liu ZS, Erhan SZ, Calvert D (2007) Solid freeform fabrication of epoxidized soybean oil/epoxy composite with bis or polyalkyleneamine curing agents. Compos Part A Appl Sci Manuf 38(1):87–93CrossRef
15.
go back to reference Liu ZS, Erhan SZ, Calvert D (2004) Solid freeform fabrication of soybean oil-based composites reinforced with clay and fibers. J Am Oil Chem Soc 81(6):605–610CrossRef Liu ZS, Erhan SZ, Calvert D (2004) Solid freeform fabrication of soybean oil-based composites reinforced with clay and fibers. J Am Oil Chem Soc 81(6):605–610CrossRef
16.
go back to reference Uyama H, Kuwabara M, Tsujimoto T, Nakano M, Usuki A, Kobayashi S (2003) Green nanocomposites from renewable resources. Chem Mater 15(13):2492–2494CrossRef Uyama H, Kuwabara M, Tsujimoto T, Nakano M, Usuki A, Kobayashi S (2003) Green nanocomposites from renewable resources. Chem Mater 15(13):2492–2494CrossRef
17.
go back to reference Park HM, Misra M, Drzal LT, Mohanty AK (2004) Green nanocomposites from cellulose acetate bioplastic and clay: effect of eco-friendly triethyl citrate plasticizer. Biomacromolecules 5:2281–2288CrossRef Park HM, Misra M, Drzal LT, Mohanty AK (2004) Green nanocomposites from cellulose acetate bioplastic and clay: effect of eco-friendly triethyl citrate plasticizer. Biomacromolecules 5:2281–2288CrossRef
18.
go back to reference Espinoza JD, Wiesenborn D, Tostenson K, Ulven CA, Tatlari M (2007) Preparation and partial characterization of canola-based epoxy resins for bio-based plastic, Paper 076079, ASABE Annual International Meeting, Minneapolis Espinoza JD, Wiesenborn D, Tostenson K, Ulven CA, Tatlari M (2007) Preparation and partial characterization of canola-based epoxy resins for bio-based plastic, Paper 076079, ASABE Annual International Meeting, Minneapolis
19.
go back to reference Crivello JV, Narayan R (1992) Epoxidized triglycerides as renewable monomers in photoinitiated cationic polymerization. Chem Mater 4(3):692–699CrossRef Crivello JV, Narayan R (1992) Epoxidized triglycerides as renewable monomers in photoinitiated cationic polymerization. Chem Mater 4(3):692–699CrossRef
20.
go back to reference Park WH, Lenz RW, Goodwin S (1998) Epoxidation of bacterial polyesters with unsaturated side chains II Rate of epoxidation and polymer properties. J Polym Sci Part A Polym Chem 36:2381–2387CrossRef Park WH, Lenz RW, Goodwin S (1998) Epoxidation of bacterial polyesters with unsaturated side chains II Rate of epoxidation and polymer properties. J Polym Sci Part A Polym Chem 36:2381–2387CrossRef
21.
go back to reference Piazza GJ, Nuñez A, Foglia TA (2003) Epoxidation of fatty acids, fatty methyl esters, and alkenes by immobilized oat seed peroxygenase. J Mol Catal B Enzym 21:143–151CrossRef Piazza GJ, Nuñez A, Foglia TA (2003) Epoxidation of fatty acids, fatty methyl esters, and alkenes by immobilized oat seed peroxygenase. J Mol Catal B Enzym 21:143–151CrossRef
22.
go back to reference Bogdal D (2005) Microwave assisted epoxidation of simple alkenes in the presence of hydrogen peroxide. Synth Commun 35:2973–2983CrossRef Bogdal D (2005) Microwave assisted epoxidation of simple alkenes in the presence of hydrogen peroxide. Synth Commun 35:2973–2983CrossRef
23.
go back to reference Campella A, Baltanás MA (2005) Degradation of the oxirane ring of epoxidized vegetable oils in liquid-liquid systems: II reactivity with solvated acetic and peracid acids. Lat Am Appl Res 35:211–216 Campella A, Baltanás MA (2005) Degradation of the oxirane ring of epoxidized vegetable oils in liquid-liquid systems: II reactivity with solvated acetic and peracid acids. Lat Am Appl Res 35:211–216
24.
go back to reference Goud VV, Patwardhan AV, Pradhan NC (2006) Studies on the epoxidation of mahua oil by hydrogen peroxide. Bioresour Technol 97:1365–1371CrossRef Goud VV, Patwardhan AV, Pradhan NC (2006) Studies on the epoxidation of mahua oil by hydrogen peroxide. Bioresour Technol 97:1365–1371CrossRef
25.
go back to reference Ackman RG (1990) Canola fatty acids—an ideal mixture for health, nutrition, and food use. In: Shahidi F (ed) Canola and rapeseed, production, chemistry, nutrition, and processing technology. Van Nostrand Reinhold, New York Ackman RG (1990) Canola fatty acids—an ideal mixture for health, nutrition, and food use. In: Shahidi F (ed) Canola and rapeseed, production, chemistry, nutrition, and processing technology. Van Nostrand Reinhold, New York
26.
go back to reference Mertens G, Snellings R, Van Balen K, Bicer-Simsir B, Verlooy P, Elsen J (2009) Pozzolanic reactions of common natural zeolites with lime and parameters affecting their reactivity. Cem Concr Res 39:233–240CrossRef Mertens G, Snellings R, Van Balen K, Bicer-Simsir B, Verlooy P, Elsen J (2009) Pozzolanic reactions of common natural zeolites with lime and parameters affecting their reactivity. Cem Concr Res 39:233–240CrossRef
27.
go back to reference Englert AH, Rubio A (2005) Characterization and environmental application of a chilean natural zeolite. Int J Miner Process 75:21–29 Englert AH, Rubio A (2005) Characterization and environmental application of a chilean natural zeolite. Int J Miner Process 75:21–29
28.
go back to reference Negis F (1999) Zeolite based composites in energy storage. MS thesis, Izmir Institute of Technology, Izmir, Turkey Negis F (1999) Zeolite based composites in energy storage. MS thesis, Izmir Institute of Technology, Izmir, Turkey
29.
go back to reference Denko S (1981) Shotherm operation manual no: 125-2KK. Instrument Products Department, 13-9 Shiba Daimon, Tokyo, 105, Japan Denko S (1981) Shotherm operation manual no: 125-2KK. Instrument Products Department, 13-9 Shiba Daimon, Tokyo, 105, Japan
30.
go back to reference Akakın T (2001) Betonun Mühendislik Özellikleri, pp 32–40 Akakın T (2001) Betonun Mühendislik Özellikleri, pp 32–40
31.
go back to reference TS 699 (1987) Tabii yapi taşlari muayene ve deney metotları Türk standardlari enstitüsü, Ankara TS 699 (1987) Tabii yapi taşlari muayene ve deney metotları Türk standardlari enstitüsü, Ankara
32.
go back to reference Shesnulevicius S (1972) Building materials. Mokslas, Vilnius, 348 (in Lithuanian) Shesnulevicius S (1972) Building materials. Mokslas, Vilnius, 348 (in Lithuanian)
33.
go back to reference Duškov M (1997) Materials research on EPS20 and EPS15 under representative conditions in pavement structures. Geotext Geomembr 15:147–181CrossRef Duškov M (1997) Materials research on EPS20 and EPS15 under representative conditions in pavement structures. Geotext Geomembr 15:147–181CrossRef
34.
go back to reference Özdemir A (2002) Capillary water absorption potential of some building materials. Geol Eng 26:19–32 Özdemir A (2002) Capillary water absorption potential of some building materials. Geol Eng 26:19–32
35.
go back to reference BS 6073 (1981) Part 1: precast concrete masonry units, part 1 specification for precast concrete masonry units. British Standards Institution BS 6073 (1981) Part 1: precast concrete masonry units, part 1 specification for precast concrete masonry units. British Standards Institution
36.
go back to reference TS705 (1985) Solid brick and vertically perforated bricks. Turkish Standard Institution TS705 (1985) Solid brick and vertically perforated bricks. Turkish Standard Institution
37.
go back to reference Yuksel Ö, Bilir T (2006) Use of granulated blast-furnace slag in concrete as fine aggregate. ACI Mater J 103(3):203–208 Yuksel Ö, Bilir T (2006) Use of granulated blast-furnace slag in concrete as fine aggregate. ACI Mater J 103(3):203–208
38.
go back to reference Horszczaruk E (2005) Abrasion resistance of high-strength concrete in hydraulic structures. Wear 259(1):62–69CrossRef Horszczaruk E (2005) Abrasion resistance of high-strength concrete in hydraulic structures. Wear 259(1):62–69CrossRef
39.
go back to reference Balo F, Ucar A, Yücel HL (2010) Development of the insulation materials from coal fly ash, perlite, clay and linseed oil. Ceram Silik 54(2):182–191 Balo F, Ucar A, Yücel HL (2010) Development of the insulation materials from coal fly ash, perlite, clay and linseed oil. Ceram Silik 54(2):182–191
40.
go back to reference Balo F, Yücel HL, Ucar A (2009) Physical and mechanical properties of materials prepared using class C fly ash and soybean oil. J Porous Mater 17(5):553–564CrossRef Balo F, Yücel HL, Ucar A (2009) Physical and mechanical properties of materials prepared using class C fly ash and soybean oil. J Porous Mater 17(5):553–564CrossRef
41.
go back to reference Balo F, Yücel HL, Ucar A (2010) Determination of the thermal and mechanical properties for materials containing palm oil, clay and fly ash. Int J Sustain Eng 3(1):47–57CrossRef Balo F, Yücel HL, Ucar A (2010) Determination of the thermal and mechanical properties for materials containing palm oil, clay and fly ash. Int J Sustain Eng 3(1):47–57CrossRef
42.
go back to reference Balo F, Biçer Y, Yücel HL (2010) The engineering properties of olive oil-based materials. J Ceram Soc Jpn 118(8):1–8 Balo F, Biçer Y, Yücel HL (2010) The engineering properties of olive oil-based materials. J Ceram Soc Jpn 118(8):1–8
43.
go back to reference Balo F, Yücel HL, Ucar A (2011) Research of the thermal and strength properties for materials obtained with sunflower oil. J Adhes Sci Technol (JAST900054) 25(14):1629–1645 Balo F, Yücel HL, Ucar A (2011) Research of the thermal and strength properties for materials obtained with sunflower oil. J Adhes Sci Technol (JAST900054) 25(14):1629–1645
Metadata
Title
Characterization of green building materials manufactured from canola oil and natural zeolite
Author
Figen Balo
Publication date
01-04-2015
Publisher
Springer Japan
Published in
Journal of Material Cycles and Waste Management / Issue 2/2015
Print ISSN: 1438-4957
Electronic ISSN: 1611-8227
DOI
https://doi.org/10.1007/s10163-014-0247-9

Other articles of this Issue 2/2015

Journal of Material Cycles and Waste Management 2/2015 Go to the issue