Top

Mechanics of Composite Materials

Published in:

10-05-2021

Characterization of TiO₂ Microparticle-Blended Polymer-Based Hybrid Wood Particulate Composites

Authors: M. ZR. Khan, S. K. Srivastava, M. K. Gupta

Published in: Mechanics of Composite Materials | Issue 2/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The effects of TiO₂ microparticle blending on the mechanical and thermal properties and the water absorption behavior of hybrid Pinus/Shorea robusta wood particulate-epoxy composites have been investigated. The tensile, flexural, impact, microhardness, and water absorption tests and a thermogravimetric analysis were performed for the hybrid composites. The results obtained, in comparison with those of a pristine composite, are presented in the form of tables and figures.

previous article An Analysis of Sensitivity of the Monitoring System of Helicopters to Faults of their Blades

next article Finite-Element Analysis and an Experimental Study into the Water Jet Reaming Process of Carbon-Carbon Composites

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

M. R. Pelaez-Samaniego, V. Yadama, E. Lowell, and R. Espinoza-Herrera, “A review of wood thermal pretreatments to improve wood composite properties,” Wood Sci. Technol., 47, No. 6, 1285-1319 (2013).CrossRef

N. K. Jain and M. K. Gupta, “Hybrid teak/sal wood flour reinforced compoosites: mechanical, thermal, and water absorption properties,” Mater. Res. Express, 5, 125306 (2018).CrossRef

M. Saxena and M. K. Gupta, “Hybrid mango/shorea robusta wood reinforced epoxy composites: crystalline behaviour and dynamic mechanical analysis,” Mater. Today, 5, 19359-19366 (2018).

A. K. Mohanty, M. Misra, and G. Hinrichsen, “Biofibers, biodegradable polymers and biocomposites: An overview,” Macromol. Mater. Eng., 276, 1-24 (2000).CrossRef

O. Hosseinaei, S. Wang, A. A. Enayati, and T. G. Rials, “Effects of hemicellulose extraction on properties of wood flour and wood-pastic composites,” Compos. Part A Appl. Sci. Manuf., 43, 686-694 (2012).CrossRef

D. N. Saheb and J. P. Jog, “Natural fiber polymer composites: a review,” Adv. Polym. Tech., 18, No. 4, 351-363 (1999).CrossRef

A. Schirp and M. P. Wolcott, “Influence of fungal decay and moisture absorption on mechanical properties of extruded wood-plastic composites,” Wood Fiber Sci., 37, No. 4, 643-652 (2005).

M. Ramesh and L. Rajeshkumar, in: Anish Khan, Showkat Ahmad Bhawani, Abdullah M. Asiri, and Imran Khan (eds.), Thermoset Composites: Preparation, Properties, and Application, Material Research Foundation, Ch. 2, MRF, USA, 33-65 (2018).

M. Valente, F. Sarasini, F. Marra, J. Tirillo, and G. Pulci, “Hybrid recycled glass fiber/ wood flour thermoplastic composites: manufacturing and mechanical chracterization,” Compos. Part A Appl. Sci. Manuf., 42, 649-657 (2011).CrossRef

10.

M. K. Gupta and R. K. Srivastava, “Mechanical, thermal and water absorption properties of hybrid sisal/jute fiber reinforced polymer compsite,” Indian J. Eng. Mater. S., 23, 231-238 (2016).

11.

M. Saxena and M. K. Gupta , “Mechanical, thermal, and water absorption properties of hybrid wood composites,” P. I. Mech. Eng. L-J Mat., 233, 1914-1922 (2018).

12.

G. Kalaprasad, B. Francis, S. Thomas , C. R. Kumar, C. Pavithran, G. Groeninckx, and S. Thomas, “Effect of fibre length and chemical modifications on the tensile properties of intimately mixed short sisal/glass hybrid fibre reinforced low density polyethylene composites,” Polym. Int., 53, 1624-1638 (2004).CrossRef

13.

L. Y. Mwaikambo and M. P. Ansell, “The effect of chemical treatment on the properties of hemp, sisal, jute, and kapok for composite reinforcement,” Angew. Makromol., 272, No. 1, 108-116 (1999).CrossRef

14.

M. N. Ichazo, C. Albano, J. Gonzalez, R. Perera, and M. V. Candal, “Polypropylene/wood flour composites: treatments and properties,” Compos. Struct., 54, No. 2-3, 207-214 (2001).CrossRef

15.

M. Kazayawok, J. J. Balatinecs, and L. M. Matuana, “Surface modification and adhesion mechanisms in wood fiberpolypropylene/veneer composites,” Holz Roh-Werkstoff, 272, No. 1, 319-326 (2001).

16.

J. M. Fleix and P. Gatenholm, “The nature of adhesion in composites of modified cellulose fibers and polypropylene,” J. Appl. Polym. Sci., 42, No. 3, 609-620 (1991).CrossRef

17.

S. H. Lee and S. Wang, “Biodegradable polymers/ bamboo fiber biocomposite with biobased coupling agent,” Compos. Part A Appl. Sci. Manuf., 37, No. 1, 80-91 (2006).CrossRef

18.

F. P. Liu, M. P. Wolcott, D. J. Gardner, and T. G. Rails , “Characterization of the interface between cellulosic fibers and a thermoplastic matrix,” Compos. Interface, 2, No. 6, 419-432 (1994).CrossRef

19.

V. Prasad, M. A. Joseph, and K. Sekar, “Investigation of mechanical, thermal and water absorption properties of flax fibre reinforced epoxy composite with nano TiO₂ addition,” Compos. Part A Appl. Sci. Manuf., 115, 360-370 (2018).CrossRef

20.

I. Ghasemi and B. Kord, “Long-term water absorption behaviour of polypropylene/ wood flour/ organoclay hybrid nanocomposite,” Iran. Polym. J., 18, No. 9, 683-691 (2009).

21.

N. Saba, P. M. Tahir, and M. Jawaid, “A review on potentiality of nano filler/natural fiber filled polymer hybrid composites,” Polymers, 6, 2247-2273 (2014).CrossRef

22.

B. Kord, A. Sheykholeslami, and A. Najafi, “Effect of nanoclay on the flexural creep behavior of wood/plastic composites,” Mech. Compos. Mater., 51, 731-736 (2016).CrossRef

23.

A. P. Meera, S. Said, Y. Grohens, A. S. Luyt, and S. Thomas, “Tensile stress relaxation studies of TiO2 and natural rubber composites,” Ind. Eng. Chem. Res., 48, No.7, 3410-3416 (2009).CrossRef

24.

X. Liu, Y. Cui, S. Hao, and H. Chen, “Influence of depositing nano-SiO₂ particles on the surface microstructure and properties of jute fibers via in situ synthesis,” Compos. Part A Appl. Sci. Manuf.,109, 368-375 (2018).CrossRef

25.

R. Gu, B. V. Kokta, D. Michalkova, B. Dimzoski, I. Fortelny, M. Slouf, and Z. Krulis, “Characteristics of wood-plastic composites reinforced with organo-nanoclays,” J. Reinf. Plast. Comp., 29, No. 24, 3566-3586 (2010).CrossRef

26.

X. Ye, H. Wang, K. Zheng, Z. Wu, Z. Haifeng, K. Tian, Z. Su, and X. Tian, “The interface designing and reinforced features of wood fiber/polypropylene composites: wood fiber adopting nano-zinc-oxide-coating via ion assembly,” Compos. Sci. Technol., 124, No. 1, 1-9 (2016).CrossRef

27.

H. Wang, G. Xian, and H. Li, “Grafting of nano-TiO₂ onto flax fibers and the enhancement of the mechanical properties of the flax fiber and flax fiber/epoxy composite,” Compos. Part A Appl. Sci. Manuf., 76, 172-180 (2015).CrossRef

28.

B. K. Deka and T. K. Maji, “Effect of TiO₂ and nanoclay on the properties of wood polymer nanocomposite,” Compos. Part A Appl. Sci. Manuf., 42, 2117-2125 (2011).CrossRef

29.

B. K. Deka and T. K. Maji, “Effect of silica nanopowder on the properties of wood flour/polymer composite,” Polym. Eng. Sci., 52, No. 7, 1516-1523 (2012).CrossRef

30.

A. Hazarika and T. K. Maji, “Ultraviolet resistance and other physical properties of softwood polymer nanocomposites reinforced with ZnO nanoparticles and nanoclay,” Wood Mater. Sci. Eng., 12, No. 1, 24-39 (2017).CrossRef

31.

A. Hamad and Al-Turaif, “Effect of nano TiO₂ particle size on mechanical properties of cured epoxy resin,” Prog. Org. Coat., 69, 241-246 (2010).CrossRef

32.

M. ZR. Khan, S. K. Srivastava, and M. K. Gupta, “Hybrid wood particulates composites: mechanical and thermal properties,” Mater. Res. Express, 6,105323 (2019).CrossRef

33.

N. Kumar, A. Singh, K. Debnath, and N. Kumar, “Water absorption and mechanical behaviour of borassus fruit fibrereinforced composites,” Emerg. Mater. Res., 9, No. 1, 10-17 (2020).

34.

M. Z. R. Khan, S. K. Srivastava, and M. K. Gupta, “Investigations of Surface micro topologies behaviour of hybrid wood composites,” Mater. Res. Express, 6, 105326 (2019).CrossRef

35.

S. Srivastava and R. K. Tiwari, “Synthesis of epoxy-TiO₂ nanocomposites: a study on sliding wear behavior, thermal and mechanical properties,” Int. J Polym. Mater., 61, pp. 999-1010 (2012).CrossRef

36.

S. Nallusamy, “Characterization of epoxy composites with TiO₂ additives and e-glass fibers as reinforcement agent,” J. Nano Res-Sw, 40, 99-104 (2016).CrossRef

37.

S-Y. Lee, I-A. Kang, G-H. Doh, H-G. Yoon, B-D. Park, and Q. Wu, “Thermal and mechanical properties of wood flour/talc-filled polylactic acid composites: effects of filler content and coupling treatment,” J. Thermoplast. Compos. Mater., 21, 209-223 (2008).CrossRef

38.

M. Z. R. Khan, S. K. Srivastava, and M. K. Gupta, “Water absorption and its effect on mechanical properties of hybrid wood particulates composites,” Mater. Res. Express, 6, No. 10, 105305 (2019).CrossRef

39.

A. Viksne, A. K. Bledzki, L. Rence, and R. Berzina, “Water uptake and mechanical characteristics of wood fiberpolypropylene composites,” Mech. Compos. Mater., 42, No. 1, 73-82 (2006).CrossRef

Title: Characterization of TiO2 Microparticle-Blended Polymer-Based Hybrid Wood Particulate Composites
Authors: M. ZR. Khan
S. K. Srivastava
M. K. Gupta
Publication date: 10-05-2021
Publisher: Springer US
Published in: Mechanics of Composite Materials / Issue 2/2021
Print ISSN: 0191-5665
Electronic ISSN: 1573-8922
DOI: https://doi.org/10.1007/s11029-021-09949-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2021

Dynamic Response of a Grid-Stiffened Composite Cylindrical Shell Reinforced with Carbon Nanotubes to a Radial Impulse Load

Dispersion of Torsional Waves in a Hollow Bilayered Cylinder with Initial Inhomogeneous Thermal Stresses

The Influence of γ-Radiation on the Structure and Mechanical Characteristics of a Polymer Composite Material Based on Low-Molecular Rubbers

Extreme Values of the Strength of Single Filaments and Threads of a Paraaramide Fiber After Its Treatment by a Water Suspension of Carbon Nanoparticles

An Analysis of Sensitivity of the Monitoring System of Helicopters to Faults of their Blades

Theoretical Estimation of the Shearing Strength of Polymer/Carbon Nanotube Contact: A Fractal Model

Premium Partners