Chemical and isotopic constraints on the origin of saline waters from a hot spring in the eastern coastal area of China

The Jimo hot spring in Shandong Peninsula, China, is a typical coastal geothermal system. The geothermal water has a very high salinity (10.8 g/L) and the origin of the salt is key to utilization of this geothermal resource. A systematic investigation of the hydrochemistry and isotopes (δ¹¹B, ⁸⁷Sr/⁸⁶Sr, δ¹⁸O, δD, ¹³C_DIC and ¹⁴C_DIC) of water from 14 geothermal wells was conducted. The results show that the geothermal waters from the high-temperature center and eastern part of the geothermal field are Cl-Na·Ca-type waters with Br/Cl (8 × 10⁻⁴–1.0 × 10⁻³), Na/Cl (0.63–0.70) and δ¹¹B values (15.9–17.2‰) that are lower than those of seawater. The western geothermal waters are dominated by Cl-Na-type waters with Br/Cl and Na/Cl values similar to those of seawater. The depleted δD and δ¹⁸O compositions and the corrected ¹⁴C_DIC age suggest that Jimo geothermal waters are mixtures of late Pleistocene to early Holocene and younger meteoric waters. An improved Br/Cl-Na/Cl diagram, ion mass balance calculations and δ¹¹B values indicate that halite and K-salt dissolution and subsequent cation exchange formed the dominant Cl-Na·Ca-type geothermal water, and this was then modified into a small amount of Cl-Na-type water in the western area by mixing with minor seawater entrapped in the unconsolidated sediments. The ⁸⁷Sr/⁸⁶Sr ratios (0.710613–0.710726) of the geothermal waters reflect water–rock reactions in the sandstone. The improved Br/Cl-Na/Cl diagram, Piper plot and boron isotopic dataset containing saline waters from coastal geothermal systems worldwide further confirm that the salinity in the Jimo geothermal water originated from dissolution of marine evaporites.