Top

Journal of Materials Science

Published in:

03-01-2022 | Composites & nanocomposites

CNTs reinforced Al-based composites produced via modified flake powder metallurgy

Authors: B. Sadeghi, P. Cavaliere

Published in: Journal of Materials Science | Issue 4/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The bimodal Al–Mg alloy structure reinforced with carbon nanotubes was evaluated after the composites production through a modified flake metallurgy technique followed by hot extrusion. The obtained bimodal microstructure of the matrix allowed to identify the microstructural mechanisms, leading to high strength, uniform elongation and strain hardening ability of the produced composites. The effect of the reinforcing phases percentages on the dislocations mechanisms evolution was evaluated through stress relaxation tests, leading to the underlying of the effect of reinforcing phases on the modification of the interphase influence zone. The results revealed that the deformation mechanism for unreinforced Al–Mg materials was forest dislocation cutting, whereas for CNT reinforcing Al–Mg composite was grain boundary and interface mediated straining. In fact, for Al–Mg/CNT composite, a task allocation occurred during the deformation process, namely at the early deformation stage by forest dislocation cutting and afterward at later deformation stage by dislocation/grain boundary/interface interaction.

previous article Enhanced thermal conductivity of PP hybrid films induced by filler orientation and laminated structure

next article Epoxy/iron alginate composites with improved fire resistance, smoke suppression and mechanical properties

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Yang M, Weng L, Zhu HX, Fan TX, Zhang D (2017) Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons. Carbon 118:250–260. https://doi.org/10.1016/j.carbon.2017.03.055CrossRef

Ramakrishnan N (1996) An analytical study on strengthening of particulate reinforced metal matrix composites. Acta Mater 44:69–77. https://doi.org/10.1016/1359-6454(95)00150-9CrossRef

Shao JC, Xiao BL, Wang QZ, Ma ZY, Yang K (2011) An enhanced FEM model for particle size dependent flow strengthening and interface damage in particle reinforced metal matrix composites. Compos Sci Technol 71:39–45. https://doi.org/10.1016/j.compscitech.2010.09.014CrossRef

Bagherpour E, Reihanian M, Miyamoto H (2017) Tailoring particle distribution nonuniformity and grain refinement in nanostructured metal matrix composites fabricated by severe plastic deformation (SPD): a correlation with flow stress. J Mater Sci 52:3436–3446. https://doi.org/10.1007/s10853-016-0632-yCrossRef

Cavaliere P, Sadeghi B, Shabani A (2017) Carbon nanotube reinforced aluminum matrix composites produced by spark plasma sintering. J Mater Sci 52:8618–8629. https://doi.org/10.1007/s10853-017-1086-6CrossRef

Chen B, Shen J, Ye X, Jia L, Li S, Umeda J, Takahashi M, Kondoh K (2017) Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites. Acta Mater 140:317–325. https://doi.org/10.1016/j.actamat.2017.08.048CrossRef

Gan YX, Dong J, Gan JB (2017) Carbon network/aluminum composite made by powder metallurgy and its corrosion behavior in seawaterMater. Chem Phys 202:190–196. https://doi.org/10.1016/j.matchemphys.2017.09.033CrossRef

Yoo S, Han S, Kim W (2013) Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes. Scripta Mater 68:711–714. https://doi.org/10.1016/j.scriptamat.2013.01.013CrossRef

Wu C, Ma WX, Chen YP, Li Y, Chen Y, Li J (2014) Progress of the current interface research on carbon nanotubes reinforced aluminum-matrix composites. Mater Mech Manuf Eng 842:196–200.

10.

Sadeghi B, Cavaliere P, Nosko M, TremboŠovÁ V, Nagy Š (2021) Hot deformation behaviour of bimodal sized Al2O3/Al nanocomposites fabricated by spark plasma sintering. J Micros 281:28–45. https://doi.org/10.1111/jmi.12947CrossRef

11.

Cavaliere P (2021) Fatigue and fracture of nanostructured materials, Springer International Publishing, Cham. https://doi.org/10.1007/978-3-030-58088-9

12.

Mikhaylovskaya A, Yakovtseva O, Sitkina M, Kotov AD (2020) Grain-boundary and intragranular deformation in ultrafine-grained aluminum-based alloy at high strain rate. Mater Lett 276:128242. https://doi.org/10.1016/j.matlet.2020.128242CrossRef

13.

Liu F, Cocks AF, Tarleton E (2021) Dislocation dynamics modelling of the creep behaviour of particle-strengthened materials. Proc Royal Soc A 477:20210083. https://doi.org/10.1098/rspa.2021.0083CrossRef

14.

Moldovan D, Wolf D, Phillpot SR, Mukherjee AK, Gleiter H (2003) Grain-boundary diffusion-controlled stress concentration in polycrystals. Phil Mag Lett 83:29–38. https://doi.org/10.1080/0950083021000045742CrossRef

15.

Yamakov V, Wolf D, Phillpot SR, Mukherjee AK, Gleiter H (2004) Deformation-mechanism map for nanocrystalline metals by molecular-dynamics simulation. Nature Mater 3:43–47. https://doi.org/10.1038/nmat1035CrossRef

16.

Zhao L, Guo Q, Li Z et al (2018) Strain-rate dependent deformation mechanism of graphene-Al nanolaminated composites studied using micro-pillar compression. Int J Plast 105:128–140. https://doi.org/10.1016/j.ijplas.2018.02.006CrossRef

17.

Zhao L, Guo Q, Shi Y et al (2019) Interfacial effect on the deformation mechanism of bulk nanolaminated graphene-Al composites. Metall Mater Trans A 50:1113–1118. https://doi.org/10.1007/s11661-018-05108-6CrossRef

18.

Xu R, Fan GL, Tan ZQ et al (2018) Back stress in strain hardening of carbon nanotube/aluminum composites. Mater Res Lett 6:113–120. https://doi.org/10.1080/21663831.2017.1405371CrossRef

19.

Cavaliere P, Sadeghi B, Shamanian M, Ashrafizadeh F (2019) Al-based nanocomposites produced via spark plasma sintering: effect of processing route and reinforcing phases. In: Cavaliere P. (eds) spark plasma sintering of materials. Springer, Cham. https://doi.org/10.1007/978-3-030-05327-7_6

20.

Sadeghi B, Tan Z, Qi J et al (2021) Enhanced mechanical properties of CNT/Al composite through tailoring grain interior/grain boundary affected zones. Composites B 223:109133. https://doi.org/10.1016/j.compositesb.2021.109133CrossRef

21.

Wang Y, Yang M, Ma X et al (2018) Improved back stress and synergetic strain hardening in coarse-grain/nanostructure laminates. Mater Sci Eng A 727:113CrossRef

22.

Ma K, Liu ZY, Liu K, Chen XG, Xiao BL, Ma ZY (2021) Structure optimization for improving the strength and ductility of heterogeneous carbon nanotube/Al–Cu–Mg composites. Carbon 178:190–201. https://doi.org/10.1016/j.carbon.2021.03.006CrossRef

23.

Sadeghi B, Qi J, Min X, Cavaliere P (2021) Modelling of strain rate dependent dislocation behavior of CNT/Al composites based on grain interior/grain boundary affected zone (GI/GBAZ). Mater Sci Eng 820:141547. https://doi.org/10.1016/j.msea.2021.141547CrossRef

24.

Wu X, Zhu Y (2017) Heterogeneous materials: a new class of materials with unprecedented mechanical properties. Mater Res Lett 5:527–532. https://doi.org/10.1080/21663831.2017.1343208CrossRef

25.

Wang Y, Chen M, Zhou F, Ma E (2002) High tensile ductility in a nanostructured metal. Nature 419:912–915. https://doi.org/10.1038/nature01133CrossRef

26.

Jiang L, Ma K, Yang H, Li M, Lavernia EJ, Schoenung JM (2017) The microstructural design of trimodal aluminum composites. JOM 66:898–908. https://doi.org/10.1007/s11837-014-0906-2CrossRef

27.

Fu X, Tan Z, Min X et al (2021) Trimodal grain structure enables high-strength CNT/Al-Cu-Mg composites higher ductility by powder assembly & alloying. Mater Res Lett 9:50–57. https://doi.org/10.1080/21663831.2020.1818324CrossRef

28.

Ye J, Han BQ, Schoenung JM (2006) Mechanical behaviour of an Al–matrix composite reinforced with nanocrystalline Al-coated B4C particulates. Phil Mag Lett 86:721–732. https://doi.org/10.1080/09500830600986109CrossRef

29.

Yang H, Topping TD, Wehage K, Jiang L, Lavernia EJ, Schoenung JM (2014) Tensile behavior and strengthening mechanisms in a submicron B4C-reinforced Al trimodal composite. Mater Sci Eng A 616:35–43. https://doi.org/10.1016/j.msea.2014.07.079CrossRef

30.

Zhang ZH, Topping T, Li Y et al (2011) Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles. Scripta Mater 65:652–655. https://doi.org/10.1016/j.scriptamat.2011.06.037CrossRef

31.

Liu ZY, Ma K, Fan GH et al (2020) Enhancement of the strength-ductility relationship for carbon nanotube/Al–Cu–Mg nanocomposites by material parameter optimisation. Carbon 157:602–613. https://doi.org/10.1016/j.carbon.2019.10.080CrossRef

32.

Fu X, Yu Z, Tan Z et al (2021) Enhanced strain hardening by bimodal grain structure in carbon nanotube reinforced Al–Mg composites. Mater Sci Eng A 803:140726. https://doi.org/10.1016/j.msea.2020.140726CrossRef

33.

Ye C, Shi J, Cheng GJ (2012) An extended finite element method (XFEM) study on the effect of reinforcing particles on the crack propagation behavior in a metal–matrix composite. Int J Fatigue 44:151–156. https://doi.org/10.1016/j.ijfatigue.2012.05.004CrossRef

34.

Chen L, Hou Z, Liu Y, Luan C, Zhu L, Li W (2020) High strength and high ductility copper matrix composite reinforced by graded distribution of carbon nanotubes. Composites A 138:106063. https://doi.org/10.1016/j.compositesa.2020.106063CrossRef

35.

Xu R, Tan Z, Xiong D et al (2017) Balanced strength and ductility in CNT/Al composites achieved by flake powder metallurgy via shift-speed ball milling. Composites A 96:57–66. https://doi.org/10.1016/j.compositesa.2017.02.017CrossRef

36.

Bakshi SR, Agarwal A (2011) An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites. Carbon 49:533–544. https://doi.org/10.1016/j.carbon.2010.09.054CrossRef

37.

Jiang L, Li Z, Fan G, Cao L, Zhang D (2012) The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminum composites with a homogenous CNT distribution. Carbon 50:1993–1998. https://doi.org/10.1016/j.carbon.2011.12.057CrossRef

38.

Ahn B, Lavernia EJ, Nutt SR (2008) Dynamic observations of deformation in an ultrafine-grained Al–Mg alloy with bimodal grain structure. J Mater Sci 43:7403–7408. https://doi.org/10.1007/s10853-008-2950-1CrossRef

39.

Joshi SP, Ramesh KT, Han BQ, Lavernia EJ (2006) Modeling the constitutive response of bimodal metals. Metall Mater Trans A 37:2397. https://doi.org/10.1007/BF02586214CrossRef

40.

Han B, Huang J, Zhu Y, Lavernia E (2006) Strain rate dependence of properties of cryomilled bimodal 5083 Al alloys. Acta Mater 54:3015–3024. https://doi.org/10.1016/j.actamat.2006.02.045CrossRef

41.

Witkin D, Lee Z, Rodriguez R, Nutt S, Lavernia E (2003) Al–Mg alloy engineered with bimodal grain size for high strength and increased ductility. Scripta Mater 49:297. https://doi.org/10.1016/S1359-6462(03)00283-5CrossRef

42.

Cavaliere P, Sadeghi B, Shabani A (2019) Spark plasma sintering: process fundamentals. In: Cavaliere P. (eds) Spark plasma sintering of materials. Springer, Cham. https://doi.org/10.1007/978-3-030-05327-7_1

43.

Sadeghi B, Shamanian M, Ashrafizadeh F, Cavaliere P (2018) Effect of processing parameters on microstructural and mechanical properties of aluminum–SiO2 nanocomposites produced by spark plasma sintering. Int J Mater Res. https://doi.org/10.3139/146.111625CrossRef

44.

Sadeghi B, Cavaliere P (2021) Progress of flake powder metallurgy research. Metals 11:931. https://doi.org/10.3390/met11060931CrossRef

45.

Sadeghi B, Cavaliere P, Roeen GA, Nosko M, Shamanian M, Trembošová V, Nagy Š, Ebrahimzadeh N (2019) Hot rolling of MWCNTs reinforced Al matrix composites produced via spark plasma sintering. Adv Comp Hybrid Mater 2:549–570. https://doi.org/10.1007/s42114-019-00095-7CrossRef

46.

Sangghaleh A, Halali M (2009) Effect of magnesium addition on the wetting of alumina by aluminium. Appl Surf Sci 255:8202–8206. https://doi.org/10.1016/j.apsusc.2009.05.044CrossRef

47.

Sadeghi B, Cavaliere P (2021) Effect of bimodal grain structure on the microstructural and mechanical evolution of al-mg/cnts composite. Metals 11:1524. https://doi.org/10.3390/met11101524CrossRef

48.

Fu X, Xu R, Yuan C, Tan Z, Fan G, Ji G, Xiong DB, Guo Q, Li Z, Zhang D (2019) Strain rate sensitivity and deformation mechanism of carbon nanotubes reinforced aluminum composites. Met Trans A 50:3544–3554. https://doi.org/10.1007/s11661-019-05284-zCrossRef

49.

Guo B, Song M, Zhang X, Liu Y, Cen X, Chen B, Li W (2021) Exploiting the synergic strengthening effects of stacking faults in carbon nanotubes reinforced aluminum matrix composites for enhanced mechanical properties. Composites B 211:108646. https://doi.org/10.1016/j.compositesb.2021.108646CrossRef

50.

Yuan C, Zhang Z, Tan Z et al (2021) Enhanced ductility by Mg addition in the CNT/Al-Cu composites via flake powder metallurgy. Mater Today Comm 26:101854. https://doi.org/10.1016/j.mtcomm.2020.101854CrossRef

51.

Yuan C, Zhang Z, Du T et al (2021) Influence of aging treatment on mechanical properties of CNT/Al–Cu–Mg rolled composites. MRS Comm 11:249–255. https://doi.org/10.1557/s43579-021-00044-wCrossRef

52.

Sadeghi B, Cavaliere P, Shamanian M, Sanayei M, Szpunar JA, Nosko M (2018) Electron backscattered diffraction analysis of friction stir processed nanocomposites produced via spark plasma sintering. J Microsc. https://doi.org/10.1111/jmi.12704CrossRef

53.

Sadeghi B, Cavaliere P, Nosko M, TremboŠovÁ V, Nagy Š (2020) Hot deformation behavior of bimodal size Al2O3/Al nanocomposites fabricated by spark plasma sintering. J Microsc 281:28–45. https://doi.org/10.1111/jmi.12947CrossRef

54.

Rollett A, Humphreys F, Rohrer GS, Hatherly M (2004) Recrystallization and related annealing phenomena, 2nd edn. Pergamon, Elmsford, New York

55.

Zhang J, Wang B, Wang H (2020) Geometrically necessary dislocations distribution in face-centred cubic alloy with varied grain size. Mater Charact 162:110205. https://doi.org/10.1016/j.matchar.2020.110205CrossRef

56.

Nes E, Ryum N, Hunderi O (1985) On the zener drag. Acta Metall 33:11–22. https://doi.org/10.1016/0001-6160(85)90214-7CrossRef

57.

Bennett TA, Petrov RH, Kestens LAI (2010) Effect of particles on texture banding in an aluminium alloy. Scripta Mater 62:78–81. https://doi.org/10.1016/j.scriptamat.2009.09.032CrossRef

58.

Balog M, Krizik P, Bajana O et al (2019) Influence of grain boundaries with dispersed nanoscale Al2O3 particles on the strength of Al for a wide range of homologous temperatures. J Alloys Compd 772:472. https://doi.org/10.1016/j.jallcom.2018.09.164CrossRef

59.

Balog M, Krizik P, Bajana O, Hu T, Yang H, Schoenung JM, Lavernia EJ (2019) Influence of grain boundaries with dispersed nanoscale Al2O3 particles on the strength of Al for a wide range of homologous temperatures. J Alloys Compd 772:472–481. https://doi.org/10.1016/j.jallcom.2018.09.164CrossRef

60.

Fan GL, Xu R, Tan ZQ, Zhang D, Li ZQ (2014) Development of flake powder metallurgy in fabricating metal matrix composites: a review. Acta Metall Sin-Eng Lett 27:806–815. https://doi.org/10.1007/s40195-014-0148-xCrossRef

61.

Wang M, Li Y, Chen B et al (2021) The rate-dependent mechanical behavior of CNT-reinforced aluminum matrix composites under tensile loading. Mater Sci Eng A 808:140893. https://doi.org/10.1016/j.msea.2021.140893CrossRef

62.

Wei H, Li ZQ, Xiong DB et al (2014) Towards strong and stiff carbon nanotube-reinforced high-strength aluminum alloy composites through a microlaminated architecture design. Scripta Mater 75:30–33. https://doi.org/10.1016/j.scriptamat.2013.11.014CrossRef

63.

Li CH, Qiu RS, Luan BF, He WJ, Li ZQ (2018) Hot deformation and processing maps of as-sintered CNT/Al-Cu composites fabricated by flake powder metallurgy. Trans Nonferr Met Soc China 28:1695–1704. https://doi.org/10.1016/S1003-6326(18)64813-7CrossRef

64.

Balog M, Hu T, Krizik P, Castro Riglos MV, Saller BD, Yang H, Schoenung JM, Lavernia EJ (2015) On the thermal stability of ultrafine-grained Al stabilized by in-situ amorphous Al2O3 network. Mater Sci Eng A 648:61–71. https://doi.org/10.1016/j.msea.2015.09.037CrossRef

65.

Roters F, Diehl M, Shanthraj P, Eisenlohr P, Reuber C, Wong SL, Maiti T, Ebrahimi A, Hochrainer T, Fabritius HO (2019) DAMASK – the düsseldorf advanced material simulation kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale. Comput Mater Sci 158:420–478. https://doi.org/10.1016/j.commatsci.2018.04.030CrossRef

66.

Grilli N, Tarleton E, Edmondson PD, Gussev MN, Cocks ACF (2020) In situ measurement and modelling of the growth and length scale of twins in $\ensuremath{\alpha}$-uranium. Phys Rev Mater 4:043605. https://doi.org/10.1103/PhysRevMaterials.4.043605CrossRef

67.

Orlov D, Kulagin R, Beygelzimer Y (2020) Strain partitioning and back-stress evaluation in harmonic-structure materials. Mater Lett 275:128126. https://doi.org/10.1016/j.matlet.2020.128126CrossRef

68.

Park HK, Ameyama K, Yoo J, Hwang H, Kim HS (2018) Additional hardening in harmonic structured materials by strain partitioning and back stress. Mater Res Lett 6:261–267CrossRef

69.

Wu X, Yang M, Yuan F et al (2015) Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility. Proc Natl Acad Sci U S A 112:14501. https://doi.org/10.1073/pnas.1517193112CrossRef

70.

Xiang Y, Wang X, Hu X et al (2019) Achieving ultra-high strengthening and toughening efficiency in carbon nanotubes/magnesium composites via constructing micro-nano layered structure. Composites A 119:225–234. https://doi.org/10.1016/j.compositesa.2019.02.006CrossRef

71.

Li Z, Zhao L, Guo Q, Li Z, Fan G, Guo C, Zhang D (2017) Enhanced dislocation obstruction in nanolaminated graphene/Cu composite as revealed by stress relaxation experiments. Scripta Mater 131:67–71. https://doi.org/10.1016/j.scriptamat.2017.01.015CrossRef

72.

Brandstetter S, Van Swygenhoven H, Van Petegem S, Schmitt B, Maaß R, Derlet PM (2006) From micro- to macroplasticity. Adv Mater 18:1545–1548. https://doi.org/10.1002/adma.200600397CrossRef

73.

Li JC (1967) Dislocation dynamics in deformation and recovery. Can J Phys 45:493–509CrossRef

74.

Wang YF, Huang CX, Fang XT, Höppel HW, Göken M, Zhu YT (2020) Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient. Scripta Mater 174:19–23. https://doi.org/10.1016/j.scriptamat.2019.08.022CrossRef

75.

Jiang Y, Xu R, Tan Z et al (2019) Interface-induced strain hardening of graphene nanosheet/aluminum composites. Carbon 146:17–27. https://doi.org/10.1016/j.carbon.2019.01.094CrossRef

76.

Kurita H, Kwon H, Estili M, Kawasaki A (2011) Multi-walled carbon nanotube-aluminum matrix composites prepared by combination of hetero-agglomeration method. Spark Plasma Sinter Hot Extrus Mater Trand 52:1960–1965. https://doi.org/10.2320/matertrans.M2011146CrossRef

77.

Delincé M, Bréchet Y, Embury JD, Geers MGD, Jacques PJ, Pardoen T (2007) Structure–property optimization of ultrafine-grained dual-phase steels using a microstructure-based strain hardening model. Acta Mater 55:2337–2350. https://doi.org/10.1016/j.actamat.2006.11.029CrossRef

78.

Dong S, Zhou J, Hui D, Wang Y, Zhang S (2015) Size dependent strengthening mechanisms in carbon nanotube reinforced metal matrix composites. Composites A 68:356–364. https://doi.org/10.1016/j.compositesa.2014.10.018CrossRef

79.

Blum W (2018) Discussion: activation volumes of plastic deformation of crystals. Scripta Mater 146:27–30. https://doi.org/10.1016/j.scriptamat.2017.10.029CrossRef

Title: CNTs reinforced Al-based composites produced via modified flake powder metallurgy
Authors: B. Sadeghi
P. Cavaliere
Publication date: 03-01-2022
Publisher: Springer US
Published in: Journal of Materials Science / Issue 4/2022
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-021-06665-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2022

Probability densities of disorientation angles among randomly oriented grains in tricrystals

Kinetic Monte Carlo modeling of homogeneous precipitation of Y–O and Y–Ti-O Oxides in bulk alpha iron

Co-deposition of Ag and Co3O4 on black TiO2-x nanotubes with enhanced photocatalytic activity under visible light irradiation

A study of tensile and bending properties of 3D-printed biocompatible materials used in dental appliances

Hybrid bilayered chitosan-xanthan/PCL scaffolds as artificial periosteum substitutes for bone tissue regeneration

Preparation of turmeric-derived sulfur-functionalized carbon dots: antibacterial and antioxidant activity

Premium Partners