Skip to main content
Top

2022 | OriginalPaper | Chapter

Comparing Analysis of Standard and Compact Versions of Two Metal Braid High-Pressure Hoses Basing on Experimental Research

Authors : Mykola Karpenko, Olegas Prentkovskis, Šarūnas Šukevičius

Published in: TRANSBALTICA XII: Transportation Science and Technology

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The results of comparing analysis of behaviour and energy efficiency between standard (regular) and compact versions of high-pressure hoses used in the machinery hydraulic drives are presented in this article. The approach in this research is based on the experimental measurement of high-pressure hose vibration, inside fluid flow pressure measurement and frequency analysis. By experimental measuring’s, compared a standard (regular) and compact versions of two metal braid composite high-pressure hoses. The current research was performed to describe a different between standard (regular) and compact versions of high-pressure hose behaviour from depend on fluid flow inside. In current research disclosed that by using different type of the two metal braid high-pressure hoses can be achieved a reduce of power losses, damped fluid pulsation and increasing hydraulic drive efficiency by replacing a high-pressure hoses on another type of high-pressure hose, during machinery hydraulic drive maintenance or on design stage.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Shen, W., Jiang, J., Su, X., Karimi, H.: Control strategy analysis of the hydraulic hybrid excavator. J. Franklin Inst. 352(2), 541–561 (2015)CrossRef Shen, W., Jiang, J., Su, X., Karimi, H.: Control strategy analysis of the hydraulic hybrid excavator. J. Franklin Inst. 352(2), 541–561 (2015)CrossRef
3.
go back to reference Cho, J.: Anisotropic large deformation and fatigue damage of rubber-fabric braid layered composite hose. Procedia Eng. 173, 1169–1176 (2017)CrossRef Cho, J.: Anisotropic large deformation and fatigue damage of rubber-fabric braid layered composite hose. Procedia Eng. 173, 1169–1176 (2017)CrossRef
4.
go back to reference Parvaresh, A., Mardani, M.: Model predictive control of a hydraulic actuator in torque applying system of a mechanically closed-loop test rig for the helicopter gearbox. Aviation 23(4), 143–151 (2019)CrossRef Parvaresh, A., Mardani, M.: Model predictive control of a hydraulic actuator in torque applying system of a mechanically closed-loop test rig for the helicopter gearbox. Aviation 23(4), 143–151 (2019)CrossRef
5.
go back to reference Bogdevičius, P., Prentkovskis, O., Bogdevičius, M.: Transmission with cardan joint parameter influence to centrifugal pump characteristics. Mokslas – Lietuvos Ateitis/Sci. Fut. Lith. 9(5), 559–564 (2017). (in Lithuanian) Bogdevičius, P., Prentkovskis, O., Bogdevičius, M.: Transmission with cardan joint parameter influence to centrifugal pump characteristics. Mokslas – Lietuvos Ateitis/Sci. Fut. Lith. 9(5), 559–564 (2017). (in Lithuanian)
8.
go back to reference Minakov, A., Platonov, D., Dekterev, A., Sentyabov, A., Zakharov, A.: The analysis of unsteady flow structure and low frequency pressure pulsations in the high-head Francis turbines. Int. J. Heat Fluid Flow 53, 183–194 (2015)CrossRef Minakov, A., Platonov, D., Dekterev, A., Sentyabov, A., Zakharov, A.: The analysis of unsteady flow structure and low frequency pressure pulsations in the high-head Francis turbines. Int. J. Heat Fluid Flow 53, 183–194 (2015)CrossRef
9.
go back to reference Paidoussis, M., Li, G.: Pipes conveying fluid: a model dynamical problem. J. Fluids Struct. 7(2), 137–204 (1993)CrossRef Paidoussis, M., Li, G.: Pipes conveying fluid: a model dynamical problem. J. Fluids Struct. 7(2), 137–204 (1993)CrossRef
10.
go back to reference Paidoussis, M.: Fluid–Structure Interactions: Slender Structures and Axial Flow, vol. 2, 192 p. Elsevier Academic Press, London (2003) Paidoussis, M.: Fluid–Structure Interactions: Slender Structures and Axial Flow, vol. 2, 192 p. Elsevier Academic Press, London (2003)
11.
go back to reference Bogdevičius, M., Karpenko, M., Bogdevičius, P.: Determination of rheological model coefficients of pipeline composite material layers based on spectrum analysis and optimization. J. Theor. Appl. Mech. 59(2), 265–278 (2021)CrossRef Bogdevičius, M., Karpenko, M., Bogdevičius, P.: Determination of rheological model coefficients of pipeline composite material layers based on spectrum analysis and optimization. J. Theor. Appl. Mech. 59(2), 265–278 (2021)CrossRef
12.
go back to reference Karpenko, M., Bogdevičius, M.: Investigation into the hydrodynamic processes of fitting connections for determining pressure losses of transport hydraulic drive. Transport 35(1), 108–120 (2020)CrossRef Karpenko, M., Bogdevičius, M.: Investigation into the hydrodynamic processes of fitting connections for determining pressure losses of transport hydraulic drive. Transport 35(1), 108–120 (2020)CrossRef
13.
go back to reference European standard. EN 853 2SN:2015. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification (2015) European standard. EN 853 2SN:2015. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification (2015)
14.
go back to reference European standard. EN 857 2SC:2015. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification (2015) European standard. EN 857 2SC:2015. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification (2015)
15.
go back to reference Karpenko, M.: Investigation of energy efficiency of mobile machinery hydraulic drives. Ph.D. dissertation, Vilniaus Gedimino technikos universitetas, 164 p. (2021) Karpenko, M.: Investigation of energy efficiency of mobile machinery hydraulic drives. Ph.D. dissertation, Vilniaus Gedimino technikos universitetas, 164 p. (2021)
Metadata
Title
Comparing Analysis of Standard and Compact Versions of Two Metal Braid High-Pressure Hoses Basing on Experimental Research
Authors
Mykola Karpenko
Olegas Prentkovskis
Šarūnas Šukevičius
Copyright Year
2022
DOI
https://doi.org/10.1007/978-3-030-94774-3_25

Premium Partner