Top

Polymer Science, Series D

Published in:

01-06-2023

Composite Materials Based on Basalt. Part 2. Composite Materials Based on Basalt Fibers and Condensation-Type Polymers

Authors: Yu. M. Evtushenko, Yu. A. Grigorev, S. A. Levanov

Published in: Polymer Science, Series D | Issue 2/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This review presents the results of a study of the properties of composite materials based on basalts and provides data on the preparation and main characteristics of the final products. The prospects for the use of composite materials based on thermoplastics, duroplastics, and elastomers in various fields of technology, energy, transport, and other branches of human activity are discussed.

previous article Application of Statistical Criteria for Checking the Homogeneity of Dispersions of Results of Fatigue Tests of Heat-Resistant Alloys Produced by Selective Laser Melting

next article Development of the Field of Elastomer Adhesives at the Koshelev Department of Chemistry and Technology of Elastomer Processing of Moscow State University of Fine Chemical Technologies, MIREA–Russian Technological University

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

I. Papa, A. Langella, and V. Lopresto, “Dynamic performances of basalt fibre laminates at room and low temperatures,” Compos. Struct. 220, 652–661 (2019). https://doi.org/10.1016/j.compstruct.2019.04.059

W. Chen, H. Hao, M. Jong, et al., “Quasi-static and dynamic tensile properties of basalt fibre reinforced polymer,” Compos. Part B: Eng. 125, 123–33 (2017). https://doi.org/10.1016/j.compositesb.2017.05.069

R. Petrucci, C. Santulli, D. Puglia, et al., “Impact and post-impact damage characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion,” Compos. Part B: Eng. 69, 507–15 (2015). https://doi.org/10.1016/j.compositesb.2017.05.069

S. O. Lee, K. Y. Rhee, and S. J. Park, “Influence of chemical surface treatment of basalt fibers on interlaminar shear strength and fracture toughness of epoxy-based composites,” J. Ind. Eng. Chem. 32, 153–156 (2015). https://doi.org/10.1016/j.jiec.2015.08.009

B. Wei, S. Song, and H. Cao, “Strengthening of basalt fibers with nano-SiO₂-epoxy composite coating,” Mater. Des 32, 4180–4186 (2011). https://doi.org/10.1016/J.MATDES.2011.04.041CrossRef

H. Khosravi and R. Eslami-Farsani, “Enhanced mechanical properties of unidirectional basalt fiber/ epoxy composites using silane-modified Na-montmorillonite nanoclay,” Polym. Test. 55, 135–142 (2016). https://doi.org/10.1016/j.polymertesting.2016.08.011

M. Bulut, “Mechanical characterization of basalt/epoxy composite laminates containing graphene nanopellets,” Compos. 122, 71–78 (2017). https://doi.org/10.1016/J.COMPOSITESB.2017.04.013

S. H. Kim, Y. J. Heo, M. Park, et al., “Effect of hydrophilic graphite flake on thermal conductivity and fracture toughness of basalt fibers/epoxy composites,” Compos. Part B: Eng. 153, 9–16 (2018). https://doi.org/10.1016/j.compositesb.2018.07.022

S.-O. Lee, S.-H. Choi, S. H. Kwon, et al., “Modification of surface functionality of multi-walled carbon nanotubes on fracture toughness of basalt fiber-reinforced composites,” Compos. Part B: Eng. 79, 47–52 (2015). https://doi.org/10.1016/J.COMPOSITESB.2015.03.077

10.

M. Kim, T. W. Lee, S. M. Park, et al., “Structures, electrical and mechanical properties of epoxy composites reinforced with MWCNT-coated basalt fibers,” Compos Part A: Appl. Sci. Manuf. 123, 123–131 (2019). https://doi.org/10.1016/j.compositesa.2019.05.011

11.

L. Yan, F. Chu, W. Tuo, et al., “Review of research on basalt fibers and basalt-reinforced composites in China (I): Physicochemical and mechanical properties,” Polym. Polym. Compos. 29, 1612–1624 (2020). https://doi.org/10.1177/0967391120977396

12.

A. Asadi, F. Baaij, H. Mainka, et al., “Basalt fibers as a sustainable and cost-effective alternative to glass fibers in sheet molding compound (SMC),” Composites Part B: Eng. 123, 210–218 (2017). https://doi.org/10.1016/j.compositesb.2017.05.017CrossRef

13.

S. M. Babu and M. V. Rao, “Experimental Studies on the Effect of Basalt Powder Inclusion on Mechanical Properties of Hybrid Epoxy and Polyester Composites Reinforced with Glass Fiber,” in Advances in Manufacturing Technology (2019), pp. 25–31. https://doi.org/10.1007/978-981-13-6374-0_4

14.

D. Matykiewicz, M. Barczewski, D. Knapski, et al., “Hybrid effects of basalt fibers and basalt powder on thermomechanical properties of epoxy composites,” Compos. Part B: Eng. 125, 157–164 (2017). https://doi.org/10.1016/j.compositesb.2017.05.060

15.

V. Lopresto, C. Leone, and I. D. Iorio, “Mechanical characterisation of basalt fibre reinforced plastic,” Compos. Part B: Eng. 42 717–723 (2011). https://doi.org/10.1016/j.compositesb.2011.01.030

16.

V. Manikandan, J. T. W. Jappes, S. M. S. Kumar, et al., “Investigation of the effect of surface modifications on the mechanical properties of basalt fibre reinforced polymer composites,” Compos. Part B: Eng. 43, 812–818 (2012). https://doi.org/10.1016/j.compositesb.2011.11.009CrossRef

17.

S. E. Artemenko and Y. A. Kadykova, “Polymer composite materials based on carbon, basalt and glass fibres,” Fibre Chem. 40, 37–39 (2008). https://doi.org/10.1007/s10692-008-9010-0CrossRef

18.

S. Carmisciano, I. M. D. Rosa, F. Sarasini, et al., “Basalt woven fiber reinforced vinylester composites: flexural and electrical properties,” Mater. Des. 32, 337–342 (2011). https://doi.org/10.1016/j.matdes.2010.06.042

19.

C. Colombo, L. Vergani, and M. Burman, “Static and fatigue characterisation of new basalt fibre reinforced composites,” Compos. Struct. 94, 1165–1174 (2012). https://doi.org/10.1016/j.compstruct.2011.10.007

20.

F. Sarasini, J. Tirillo, L. Ferrante, et al., “Drop-weight impact behaviour of woven hybrid basalt-carbon/epoxy composites,” Compos.Part B: Eng. 59, 204–220 (2014). https://doi.org/10.1016/j.compositesb.2013.12.006

21.

I. D. G. Ary SubagiaI, L. D. Tijing, Y. Kim, et al., “Mechanical performance of multiscale basalt fiber- epoxy laminates containing tourmaline micro/nano particles,” Compos. Part B: Eng. 58, 611–6172014. https://doi.org/10.1016/j.compositesb.2013.10.034

22.

M. Wang, Z. Zhang, Y. Li, et al., “Chemical durability and mechanical properties of alkali-proof basalt fiber and its reinforced epoxy composites,” J. Reinforc. Plast. Compos. 27, 393–407 (2008). https://doi.org/10.1177/0731684407084119CrossRef

23.

M. T. Kim, K. Y. Rhee, S. J. Park, et al., “Effects of silane-modified carbon nanotubes on flexural and fracture behaviors of carbon nanotube-modified epoxy/basalt composites,” Compos. Part B: Eng. 43, 2298–2302 (2012). https://doi.org/10.1016/j.compositesb.2011.12.007CrossRef

24.

D. Kurniawan, B. S. Kim, H. Y. Lee, et al., “Atmospheric pressure glow discharge plasma polymerization for surface treatment on sized basalt fiber/polylactic acid composites,” Compos. Part B: Eng. 43, 1010–1014 (2012). https://doi.org/10.1016/J.COMPOSITESB.2011.11.007CrossRef

25.

Z. Ying, D. Wu, M. Zhang, et al., “Polylactide/basalt fiber composites with tailorable mechanical properties: effect of surface treatment of fibers and annealing,” Compos. Struct. 176, 1020–1027 (2017). https://doi.org/10.1016/J.COMPSTRUCT.2017.06.042

26.

C. R. Mahesha, M. N. Shivarudraiah, and M. Rajesh, “Role of nanofillers on mechanical and dry sliding wear behavior of basalt–epoxy nanocomposites,” Mater. Today Proc. 4, 8192–8199 (2017). https://doi.org/10.1016/J.MATPR.2017.07.161CrossRef

27.

H. Khosravi and R. Eslami-Farsani, “Enhanced mechanical properties of unidirectional basalt fiber/ epoxy composites using silane-modified Na+-montmorillonite nanoclay,” Polym. Test. 55, 135–142 (2016). https://doi.org/10.1016/j.polymertesting.2016.08.011

28.

B. Hao, T. Föster, E. Möer, et al., “Modification of basalt fibre using pyrolytic carbon coating for sensing applications,” Compos. Part A: Appl. Sci. Manuf. 101, 123–128 (2017). https://doi.org/10.1016/J.COMPOSITESA.2017.06.010CrossRef

29.

G. J. Wang, Y. W. Liu, Y. J. Guo, et al., “Surface modification and characterizations of basalt fibers with non-thermal plasma,” Surf. Coating Technol. 201, 6565–6568 (2007). https://doi.org/10.1016/J.SURFCOAT.2006.09.069

30.

M. C. Seghini, F. Touchard, F. Sarasini, et al., “Engineering the interfacial adhesion in basalt/epoxy composites by plasma polymerization,” Compos. Part A: Appl. Sci. Manuf. 122, 67–76 (2019). https://doi.org/10.1016/j.compositesa.2019.04.013CrossRef

31.

M. T. Kim and M. H. Kim, et al., “Study on an oxygen plasma treatment of a basalt fiber and its effect on the interlaminar fracture property of basalt/ epoxy woven composites,” Compos. Part B: Eng. 42, 499–504 (2011). https://doi.org/10.1016/j.compositesb.2010.12.001

Title: Composite Materials Based on Basalt. Part 2. Composite Materials Based on Basalt Fibers and Condensation-Type Polymers
Authors: Yu. M. Evtushenko
Yu. A. Grigorev
S. A. Levanov
Publication date: 01-06-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 2/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421223020090

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2023

Adhesive-Material Combustibility-Reduction Methods. Part 2. Combustibility Reduction by Adding Low-Combustibility Oligomers

The Effect of Lignin on the Reactivity of Phenol-Formaldehyde Resin and Properties of a Thermal-Insulation Material Based on It

Wastewater Treatment after Waterjet Cutting to Create a Reverse Water Cycle

Adhesive-Material Combustibility-Reduction Methods. Part 1

An Electrospun Thermoadhesive Material as a Component of Multilayered Composites for the Filtration of Aircraft Fuels and Hydraulic Fluids

Analysis of Properties of Reinforced Plastics Based on Modified Epoxy Resins

Premium Partners