Top

Metallurgical and Materials Transactions B

Published in:

26-06-2018 | Communication

Compositional and Thermal Characterization of Potential Nano-Carbon Copper Composite

Authors: M. Zavala, E. P. Gorzkowski, R. K. Everett, M. Zupan

Published in: Metallurgical and Materials Transactions B | Issue 5/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Covetic materials have been claimed to be new types of metal matrix nano-composite materials. These materials are formed from face-centered-cubic metals which are alleged to be super-saturated with up to ~ 10 wt pct of activated nano-carbon. The focus of this study was to characterize the chemical composition of copper covetic materials of varying nano-carbon concentrations, and characterize the thermal properties of these materials in order to determine if these materials exhibit enhanced material properties.

previous article Interfacial Microstructural Evolution and Metallurgical Bonding Mechanisms for IN718 Superalloy Joint Produced by Hot Compressive Bonding

next article In Situ Observation of the Nucleation and Growth of Ferrite Laths in the Heat-Affected Zone of EH36-Mg Shipbuilding Steel Subjected to Different Heat Inputs

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

L. G. Salamanca-Riba, R. A. Isaacs, A.N. Mansour, A. Hall, D. R. Forrest, M. C. LeMieux, and J. Shugart: Tech Connect World, Santa Clara, CA, 2012.

S. Saji, T. Kadokura, H. Anada, K. Notoya, and N. Takano: Materials Transactions, JIM, 1998, vol. 39, pp. 778-781CrossRef

M. Zavala: Master’s Thesis, University of Maryland, Baltimore County, Baltimore, 2017, p. 105.

T. Knych, P. Kwasniewski, G. Kiesiewicz, A. Mamala, A. Kawecki, and B. Smyrak: Metallurgical and Materials Transactions B, 2014, vol. 45, pp. 1196-1203CrossRef

J. Shugart, R. Scherer and R. Penn: U.S. Patent 9,273,380.

J. Shugart and R. Scherer: U.S. Patent 8,647,534.

L. Brown, P. Joyce, D. Forrest, and L. Salamanca-Riba: Materials Performance and Characterization, 2014, vol. 3, pp. 65-80

H.M. Iftekhar Jaim, D.P. Cole, and L.G. Salamanca-Riba: Carbon, 2017, vol. 111, pp. 309-321CrossRef

MKM Mansfelder Kupfer and Messing GmbH: Copper Certification of Purity, 2014, Heddstedt, Germany.

10.

Calgon Carbon Corporation: Activated Carbon MSDS, 2007, Pittsburgh, PA.

11.

Freeport-McMoRan Copper & Gold: Material Post-Process Operations Breakdown, Private Communication.

12.

D.R. Forrest, I. Jasiuk, Capt. L. Brown, P. Joyce, A. Mansour, and L. Salamanca-Riba: Naval Surface Warfare Center, Carderock Division, 2012, Document Accession Number ADA559436.

13.

G. Benchabane, Z. Boumerzoug, I. Thibon, and T. Gloriant: Materials Characterization, 2006, vol. 59, pp. 1425-1428CrossRef

14.

W.J. Boettinger, U.R. Kattner, K.-W. Moon, and J.H. Perepezko: National Institute of Standards and Technology Special Publication, 2006, No. 96-15.

15.

J. Davis: ASM Metals Handbook Desk Edition, ASM International, Cleveland, 1998, p. 506

16.

J. P. Neumann, T. Zhong, and Y. A. Chang: Bulletin of Alloy Phase Diagrams, 1984, vol. 5, pp. 136-140CrossRef

17.

B. Hallstedt, D. Risold, and L. J. Gaucker: J. Phase Equilibria, 1994, vol. 15, pp. 483-499CrossRef

18.

U. Balachandran, B. Ma, S. E. Dorris, R. E. Koritala, and D. R. Forrest: Materials Science and Technology, Salt Lake City, UT, 2016.

19.

S. Amini, J. Garay, G. Liu, A. A. Balandin, and R. Abbaschian: Journal of Applied Physics, 2010, vol. 108, 094321CrossRef

20.

R.A. Isaacs, H. Zhu, C. Preston, A. Mansour, M. LeMieux, P.Y. Zavalij, H.M. Iftekhar Jaim, O. Rabin, L.Hu, and L.G. Salamanca-Riba: Applied Physics Letters, 2015, vol. 106, 193108CrossRef

Title: Compositional and Thermal Characterization of Potential Nano-Carbon Copper Composite
Authors: M. Zavala
E. P. Gorzkowski
R. K. Everett
M. Zupan
Publication date: 26-06-2018
Publisher: Springer US
Published in: Metallurgical and Materials Transactions B / Issue 5/2018
Print ISSN: 1073-5615
Electronic ISSN: 1543-1916
DOI: https://doi.org/10.1007/s11663-018-1316-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5/2018

Transient Rheological Behavior of Semisolid SEED-Processed 7075 Aluminum Alloys in Rapid Compression

Transient Interaction Between Reduction and Slagging Reactions of Wustite in Simulated Cohesive Zone of Blast Furnace

Study on the Extraction of Aluminum From Aluminum Dross Using Alkali Roasting and Subsequent Synthesis of Mesoporous γ-Alumina

Investigation of the Carbochlorination Mechanism of Mullite from Fly Ash

Sintering of Iron Ores in a Millipot in Comparison with Tablet Testing and Industrial Process

Interfacial Microstructural Evolution and Metallurgical Bonding Mechanisms for IN718 Superalloy Joint Produced by Hot Compressive Bonding

Premium Partners