Top

Published in:

2021 | OriginalPaper | Chapter

20. Conveying and Construction Machinery

Authors : André Katterfeld, Alan Roberts, Craig Wheeler, Kenneth Williams, Chris Wensrich, Jan Scholten, Mark Jones, Günter Kunze, Henning Strubelt, Dusan Ilic, Tim Donohue, Hendrik Otto, Jens Sumpf, Wei Chen, Bin Chen, Daniel Ausling

Published in: Springer Handbook of Mechanical Engineering

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this chapter, the fundamentals of design of conveying and construction machinery will be presented. Machines that fulfill transportation tasks in limited operating areas such as mines, ports, work and storage yards, as well as construction sites are most common and can be found in any type of industry. Hence, the diversity of conveying and construction machinery is very wide. However, the typical driving elements, machine components, and calculation concepts are similar.

The group of construction machinery covers many machines, e.g., concrete mixers or compactors that are not used for material transport. Such machines are not discussed in this chapter.

While the machinery belonging to the group of conveying technology is very diverse, many machine drives and parts are quite similar. The first aim of this chapter is to present a system for the classification of general materials handling equipment, which allows the understanding of the basic calculation methods. The two main groups of conveyors can be distinguished by their operational process: continuous and discontinuous conveyors. Another significant difference are the goods the equipment should handle: general cargo or bulk materials.

The second aim is the presentation of the basics of the design and calculation of conveying technology and their main mechanical elements and drives. To understand the design of bulk materials handling equipment, the necessary basics of bulk mechanics are described in Sect. 20.2. The design and calculation of basic machine elements of materials handling equipment (e.g., steel ropes, chains or wheels and tracks) are presented in Sect. 20.3. Section 20.4 presents the most important continuous conveying machinery, followed by discontinuous conveying machinery in Sect. 20.5. The necessary storage equipment is presented in Sect. 20.6.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Turbomachinery

next chapter Trends and Challenges in Mobility and Transportation

W.A. Günthner, K. Heptner: Technische Innovationen für die Logistik (Huss, München 2007)

ISO 6780: Flat pallets for intercontinental materials handling–Principal dimensions and tolerances (2003)

ISO 668: Series 1 freight containers–Classification, dimensions and ratings (2013)

Port of Rotterdam: Homepage, www.portofrotterdam.com (2016)

K.-H. Grote, J. Feldhusen (Eds.): Dubbel – Taschenbuch für den Maschinenbau, 24th edn. (Springer, Berlin, Heidelberg 2014)

A. Katterfeld, K. Williams: Functional analysis of tube chain conveyors part 1: General design and calculation principles, Bulk Solids Powder Sci. Technol. 2(3), 23–32 (2008)

A.W. Jenike: Gravity Flow of Bulk Solids. Bulletin of the Utah Engineering Experiment Station, vol. 108 (Univ. Utah, 1961)

A.W. Jenike: Storage and Flow of Solids. Bulletin of the Utah Engineering Experiment Station, vol. 123 (Univ. Utah, 1964)

A.W. Roberts, O.J. Scott, W. Tiedemann: Bulk handling of ammonium nitrate: Flow properties and storage bin design criteria. In: Int. Powder Bulk Solids Conf., Philadelphia, USA, May 1979 (1979)

D. Schulze: Flow properties of powders and bulk solids (Univ. Applied Sciences, Braunschweig, Wolfenbüttel 2006)

W. Chen, J. Miller, K. Williams, A. Roberts: Rapid and reliable flow property testing – A modified uniaxial approach. In: Proceedings of Iron Ore (2017)

K.Y. Chung, G.J. Burdett: Dustiness testing and moving towards a biologically relevant dustiness index, Ann. Occup. Hyg. 38(6), 945–949 (1994)

C.P. Lyons, D. Mark, K.Y.K. Chung, G. Burdett: The application of health-related size fractions to dustiness measurement, J. Aerosol Sci. 23(1), S607–S610 (1992)

M.A.E. Plinke, D. Leith, D.B. Holstein, M.G. Boundy: Experimental examination of factors that affect dust generation, Am. Ind. Hyg. Assoc. J. 52(12), 521–528 (1991)

I.S. EN 15051: Workplace exposure – measurement of the dustiness of bulk materials (Parts 1 to 3) (The National Standards Authority of Ireland, Dublin 2013)

I. Pensis, J. Mareels, D. Dahmann, D. Mark: Comparative evaluation of the dustiness of industrial minerals according to European Standard EN 15051, 2006, Ann. Occup. Hyg. 54(2), 204–216 (2010)

W.A. Heitbrink, W.F. Todd, T.C. Cooper, D.M. O’Brien: The application of dustiness tests to the prediction of worker dust exposure, Am. Ind. Hyg. Assoc. J. 51(4), 217–223 (1990)

AS 4156.6: Coal Preparation – Part 6: Determination of dust/moisture relationship for coal, Standards Australia (2013)

T.R. Farrugia, N. Ahmed, G.J. Jameson: A new technique for measuring dustiness of coal, J. Coal Qual. 8(2), 51–55 (1989)

M. Djukic, J.H. Planner: Evaluation of dust emission from coal wagons. In: 3rd Int. Conf. Storing Handl. Transp. Bulk, BulkSolids Europe 2010, 9–10 September 2010, Glasgow (2010)

J.H. Planner: A sustainable approach to manage dust emission during handling and transport of coal and iron ore. In: 20th Int. Clean Air Environ. Conf., Clean Air Society of Australia and New Zealand (CASANZ), 31 July–2 August 2011, Auckland, New Zealand (2011)

J.H. Planner: Improving air quality for communities adjacent to coal terminals in Hay Point Queensland. In: 11th Int. Congr. Bulk Mater. Storage Handl. Transp. (ICBMH), 2–4 July 2013, Univ. Newcastle, Australia (2013)

D. Ilic, J. Planner, A. Roberts: Revision of AS 4156.6 dustiness test – final report, ACARP Project C23054, Univ. Newcastle, Australia (2015)

D. Ilic, J. Planner, S. Biswas, S. Reid: Revision of AS 4156.6 Coal preparation – Part 6: Determination of dust/moisture relationship for coal. In: Proc. 12th ICBMH, ACT, Barton (2016)

AS 3880-1991: Bin flow properties of coal (1991)

Institution of Chemical Engineers: Standard Shear Testing Procedure for Particulate Solids Using the Jenike Shear Cell (Institution of Chemical Engineers, Rugby 1989)

D6128-00: Standard Method for Shear Testing Using the Jenike Shear Cell, ASTM International, USA (2003)

ASTM G162-99: Standard practice for conducting and evaluating laboratory corrosion tests in soils (2010)

DIN 50929-3: Corrosion of metals–Probability of corrosion of metallic materials when subject to corrosion from the outside–Buried and underwater pipelines and structural components (1985)

EN 12501: Protection of metallic materials against corrosion–Corrosion likelihood in soil (2003)

United Nations: United Nations Manual of Tests and Criteria (2009) pp 364–365

G.P. Tilly: Erosion caused by impact of solid particles. In: Treatise on Materials Science and Technology, Vol. 13 (Academic Press, London 1979) pp. 287–319

G.P. Tilly, W. Sage: The interaction of particle and material behaviour in erosion process, Wear 16, 447–465 (1970)

I.M. Hutchings: Wear by particulates, Chem. Eng. Sci. 42(4), 859–878 (1987)

J.G.A. Bitter: A study of erosion phenomena part I, Wear 6, 5–21 (1963)

R. Glardon, I. Finnie: A review of the recent literature on the lubricated sliding wear of dissimilar metals, ASME J. Eng. Mater. Technol. 103(4), 333–340 (1981)

A. Finckh-Jung, G. Novak, S. Winter: Research results for the application of high tensile tension members and running fibre ropes. In: Proceedings: IFAC (Int. Fibre Appl. Conf. 5th Ed., Antwerp, Belgium) (2015)

G. Novak: Use of high-modulus fibre ropes in rope drives using the example of S/R-machines, Logist. J. (2016), https://doi.org/10.2195/lj_Proc_novak_de_201605_01CrossRef

M. Wehr: Synthetische Faserseile unter hochdynamischer Beanspruchung, Logist. J. (2017), https://doi.org/10.2195/lj_Proc_wehr_de_201710_01CrossRef

J.C. Weis, B. Ernst, K.H. Wehking: Use of high strength fibre ropes in multi-rope kinematic robot systems. In: Cable-Driven Parallel Robots. Mechanisms and Machine Science, Vol. 12, ed. by T. Bruckmann, A. Pott (Springer, Berlin, Heidelberg 2013)

A. Kretschmer: Einflussfaktoren auf die Lebensdauer laufender Faserseile, PhD thesis (TU Chemnitz, 2016)

ISO 2408: Steel wire ropes–Requirements (2017)

DIN EN ISO ISO 16120-1: Non-alloy steel wire rod for conversion to wire–Part 1: General requirements (2011)

K. Feyrer: Wire Ropes: Tension, Endurance, Reliability (Springer, Berlin, Heidelberg 2015)

DIN EN 12385-2: Steel wire ropes–Safety–Part 2: Definitions, designation and classification (2008)

VDI 2358: Wire ropes for materials-handling equipment (2012)

ISO 4309: Cranes–Wire ropes–Care and maintenance, inspection and discard (2017)

ISO 16625: Cranes and hoists – Selection of wire ropes, drums and sheaves (2013)

DIN EN 12385-4: Steel wire ropes–Safety–Part 4: Stranded ropes for general lifting applications (2008)

ISO 4301-1: Cranes Classification Part 1: General (2016)

DIN 15020: Hebezeuge; Grundsätze für Seiltriebe, Berechnung und Ausführung (1974)

M. Scheffler: Grundlagen der Fördertechnik – Elemente und Triebwerke (Wiesbaden, Vieweg 1994)

American Chain Association: Standard Handbook of Chains: Chains for Power Transmission and Material Handling, 2nd edn. (CRC Press, Boca Raton 2005)

DIN 764-1: Round steel link chains–Round steel link chains for chain conveyors–Part 1: Grade 3 (2010)

ISO 610: Hochfeste Rundstahlketten für Kettenförderer und Kohlenhobel (1990)

DIN 17115: Steels for welded round link chains and chain components – Technical delivery conditions (2012)

DIN 22252: Round steel link chains for use in continuous conveyors and winning equipment in mining (2012)

DIN 685-1: Geprüfte Rundstahlketten; Begriffe (1981)

DIN 685-2: Geprüfte Rundstahlketten – Teil 2: Sicherheitstechnische Anforderungen (2001)

DIN 685-3: Geprüfte Rundstahlketten – Teil 3: Prüfung (2001)

DIN 685-4: Geprüfte Rundstahlketten – Teil 4: Kennzeichnung, Prüfzeugnis (2001)

DIN 685-5: Geprüfte Rundstahlketten; Benutzung (1981)

DIN 685-100: Geprüfte Rundstahlketten – Teil 100: Zusätzliche Begriffe (2011)

DIN 762-1: Round steel link chains–Round steel link chains, pitch 5d, for chain conveyors –Part 1: Grade 3, quenched and tempered (2015)

DIN 762-2: Round steel link chains–Round steel link chains, pitch 5d, for chain conveyors–Part 2: Grade 5, quenched and tempered (2015)

DIN 766: Round steel link chains–Round steel link chains, pitch 2,8d, for chain conveyors, grade 3, quenched and tempered (2015)

DIN 5684-1: Rundstahlketten für Hebezeuge; Güteklasse 5, lehrenhaltig, geprüft (1984)

DIN 5684-2: Rundstahlketten für Hebezeuge; Güteklasse 6, lehrenhaltig, geprüft (1984)

DIN 5684-3: Round steel link chains–Fine tolerance hoistchains–Part 3: Grade T (Types T, DAT and DT) (2013)

DIN 5687-1: Rundstahlketten – Teil 1: Güteklasse 5, mittel toleriert, geprüft (1996)

ISO 4347: Leaf chaines, clevises and sheaves–Dimensions, measuring forces, tensile strengths and dynamic strengths (2015)

ISO 1977: Conveyor chains, attachments and sprockets (2006)

S. Shimura: The Complete Guide to Chain (U.S. Tsubaki, Wheeling 1997)

C. Rohne, M. Schreiter, J. Sumpf, K. Nendel, L. Kroll: Hybrid conveyor chains – Calculation, design and manufacturing. In: Conf. Proc. 3. Int. Symp. Plastic-Slide-Chains Tribol. Conveyor Syst., Chemnitz, 11./22. April (2017) pp. 65–77

J. Strobel, J. Sumpf: Dynamic studies on a slide chain conveyor system. In: Conf. Proc. 3. Int. Symp. Plastic-Slide-Chains Tribol. Conveyor Syst., Chemnitz, 11./22. April 2017 (2017) pp. 180–186

R. Lewis, U. Olofsson: Wheel-Rail Interface Handbook (Woodhead, Sawston 2009)

ISO 16881: Cranes–Design calculation for rail wheels and associated trolley track supporting structure–Part 1: General (2005)

W. Hay: Railroad Engineering (Wiley, New York 1953)

Астахов П.Н.: Сопротивление движению железнодорожного подвижного состава (Resistance to motion of railway rolling stock) Труды ЦНИИ МПС (ISSN 0372-3305). Выпуск 311 (Vol. 311) (Транспорт, Москва, 1966). In Russian

M.D. Hersey: Rolling friction. In: Transactions of the ASME (1969) pp. 260–275

T.D. Gillespie: Fundamentals of Vehicle Dynamics (Society of Automotive Engineers, Warrendale 1992)

J. Pajer, H. Kuhn, F. Kurth: Stetigförderer, Vol. 5 (Verlag Technik, Berlin 1988)

CEMA: Belt Conveyors for Bulk Materials, 7th edn. (Conveyor Equipment Manufacturers Association, Naples 2014)

I.M. Thomson: Development of the cable belt conveyor. In: Proc. BeltCon1, South Africa (1981)

C.A. Wheeler: Development of the rail conveyor technology, Int. J. Min. Reclam. Env. 2017, 1–15 (2017)

ISO 5048: Continuous mechanical handling equipment–Belt conveyors with carry idlers–Calculation of operating power and tensile forces, International Standard, Switzerland (1989)

DIN 22101: Continuous conveyors – Belt conveyors for loose bulk materials – Basis for calculation and dimensioning (2011)

H. Colijn: Mechanical Conveyors for Bulk Solids (Elsevier, Amsterdam 1995)

C.A. Wheeler: Rotating resistance of belt conveyor idler rolls, J. Manuf. Sci. Eng. 138(2015), 1–8 (2015)

DIN 22113-3: Belt conveyors–Part 3: Belt conveyors for underground coalmining; idlers; testing (1996)

P.J. Munzenberger, C.A. Wheeler: Laboratory measurement of the indentation rolling resistance of conveyor belts, Int. J. Meas. 94, 909–918 (2016)

AS 1334-13: Methods of testing conveyor and elevator belting. Determination of indentation rolling resistance of conveyor belting (2017)

DIN 22123, Conveyor belts – Indentation rolling resistances of conveyor belts related to beltwidth—Requirements, testing (2011). Withdrawn, replaced by DIN EN 16974

J.I. O’Shea, C.A. Wheeler, P.J. Munzenberger, D.G. Ausling: The influence of viscoelastic property measurements on the predicted rolling resistance of belt conveyors, J. Appl. Poly. Sci. 13, 9170–9178 (2014)

C.A. Wheeler, A.W. Roberts, M.G. Jones: Calculating the flexure resistance of bulk solids transported on belt conveyors, Part. Part. Syst. Charact. 21, 340–347 (2004)

M. Dratt, A. Katterfeld, C.A. Wheeler: Determination of the bulk flexure resistance via coupled FEM-DEM simulation, Bulk Solids Handl. 3, 52–60 (2016)

P. J. Munzenberger: Three dimensional numerical modelling of conveyor belt indentation rolling resistance, PhD thesis (Univ. Newcastle, 2016)

DIN 22101: Continuous conveyors – Belt conveyors for loose bulk materials – Basis for calculation and dimensioning (1982)

Contitech: Installing and splicing textile conveyor belts (Contitech, Hannover 2010)

Phoenix: Phoenix Conveyor Belts Design Fundamentals (Phoenix, Hamburg 2004)

M. Selby: Introduction to tracking a conveyor belt. In: Australian Bulk Solid Handlings (2010)

Engineerdo: Reasons for belt mistracking, https://www.engineerdo.com/2019/10/04/belt-mistracking/ (2019)

T. Swindermann, L. Goldbeck, D. Marshall, M. Strebel: Foundations, Volume 4 (Martin Engineering, Neponset, 2011)

H. Otto, A. Katterfeld: Prediction and simulation of the mistracking of conveyors belts. In: 8th Int. Conf. Conveying Handl. Part. Solids (CHOPS 2015), Tel-Aviv (2015), Art. 139

H. Otto, A. Katterfeld: Analysis and simulation of belt tracking of conveyor belts, World Min. Surf. Underg. 67(1), 53–59 (2015)

M. Egger: Laufverhalten von Flachbändern: Lenkmechanismen beim seitlichen Führen von Bändern, Stahleisen Communications (Verlag Stahleisen, Düsseldorf 2008)

ISO 7190: Continuous mechanical handling equipment; Bucket elevators; Classification Bilingual edition (1981)

ISO 5050: Continuous mechanical handling equipment; Vertical bucket elevators with calibrated round steel link chains; General characteristics (1981)

ISO 5051: Continuous mechanical handling equipment; Deep elevator bucket with flat rear wall; Main dimensions (1981)

VDI 2324: Vertical bucket elevators (2001)

A. Katterfeld, T. Gröger: Application of the discrete element method in materials handling: Bucket elevators and scraper conveyors, Bulk Solid Handl. 27(4), 228–234 (2007)

DIN 15237-1: Steel cord conveyor belts–Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (2017)

DIN EN ISO 15236-1: Steel cord conveyor belts–Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (2017)

DIN 15231: Continuous mechanical handling equipment; bucket elevators, shallow buckets (1980)

DIN 15232: Continuous mechanical handling equipment; bucket elevators, shallow, rounded buckets (1980)

DIN 15233: Continuous mechanical handling equipment; bucket elevators, medium deep buckets (1980)

DIN 15234: Continuous mechanical handling equipment; bucket elevators, deep buckets with flat rear wall (1980)

DIN 15235: Continuous mechanical handling equipment; bucket elevators, deep buckets with curved rear wall (1980)

Nerak GmbH: Systeme für Schüttgüter, http://www.nerak.de/schuettgut.html (2017)

ContiTech Transportbandsysteme GmbH: POCKETLIFT^® The innovation in highend vertical conveying, http://apps.contitech-online.com/pages/produkte/transportbaender/brochures/WT7836_ContiTech_Pocketlift_en.pdf (2017)

Schrage Rohrkettensysteme GmbH: Firmenschrift (Firma Schrage Rohrkettensysteme GmbH, Friedeburg 2000)

F. Krause: Schüttgutumschlag, FAM Förderanlagen Magdeburg GmbH (2012)

A. Katterfeld, K. Williams: Functional analysis of tube chain conveyors part 1: General design and calculation principles, Bulk Solids Powder Sci. Technol. 2(3), 23–32 (2008)

A. Katterfeld, K. Williams: Functional analysis of tube chain conveyors part 2: Experimental research and final recommendation for the calculation, Bulk Solids Powder Sci. Technol. 2(3), 74–82 (2008)

Guo, J.: Investigation of arching behaviour under surcharge pressure in mass-flow bins and stress states at hopper/feeder interface, PhD thesis (Univ. Newcastle 2014)

J. Guo, A.W. Roberts, J.-D. Prigge: Experimental and simulation investigation of flow patterns and feeder loads at hopper/feeder interface. In: Proceedings of the 11th Int. Congr. Bulk Mater. Storage Handl.Transp. The Univ. Newcastle (2013)

R. Bartsch: Erweiterung der Dimensionierungsgrundlagen für Gleitkettenfödersysteme, PhD thesis (TU Chemnitz, 2017)

H.-J. Zebisch: Fördertechnik 2: Stetigförderer (Vogel, Würzburg 1972)

ISO 7119: Continuous mechanical handling equipment for loose bulk materials–Screw conveyors–Design rules for drive power (1981)

ANSI/CEMA Standard #350: Screw conveyors for bulk materials (2015)

DIN 15262: Continuous mechanical handling equipment; Screw conveyors for loose bulk materials; Design principles (1983)

VDI 2330 Part 1–4: Screw conveyors for bulk materials (09/2013, 05/2015, 03/2016)

A.W. Roberts, A.H. Willis: Performance of grain augers, Proc. Inst. Mech. Eng. 176, 165 (1962)

A.W. Roberts: An investigation of grain vortex motion with relation to the performance within vertical grain augers, Proc. Inst. Mech. Eng. 178, 293 (1964)

A.W. Roberts: The influence of granular vortex motion on the volumetric performance of enclosed screw conveyors, Powder Technol. 104, 56–67 (1999)

A.W. Roberts: Design and performance criteria for screw conveyors in bulk solids operation, Bulk Solids Handl. 22, 436–444 (2002)

D. Schlesinger, A. Papkov: Screw conveyor calculation based on actual material properties, Powder Handl. Process. 9(4), 321–325 (1997)

A.W. Roberts, S.J. Wiche, D.D. Ilic, S.R. Plint: Flow dynamics and wear considerations in transfer chute design. In: Proc. 8th ICBMH 2004, Institution of Engineers, Australia (2004) pp. 330–334

A.W. Roberts: Bulk solids: Opitimizing screw conveyors, Chem. Eng. 122, 62–68 (2015)

T. Risch: Zweidimensionale Bewegungsformen in der Vibrationsfördertechnik, Ph.D. thesis (TU Chemnitz, 2011), http://www.qucosa.de/fileadmin/data/qucosa/documents/6549/Diss_Risch.pdf

G. Uryadov, A. Katterfeld, F. Krause: Experimental investigations of the bulk solid reaction on vibratory conveyors. In: Conf. Proc. 6th Int. Conf. Conveying Handl. Part. Solids (CHoPS). Brisbane (2009) pp. 411–416

S. Böttcher: Beitrag zur Klärung der Gutbewegung auf Schwingrinnen, Fördern und Heben 8 (1958). PhD Thesis (TH Hannover, 1957)

G. Uryadov: Analyse der Schüttrückwirkung bei Vibrationsförderern, Ph.D. thesis (Univ. Magdeburg, 2014)

N. Dallinger: Diskrete Elemente Methode als Simulationsmethode in der Vibrationsfördertechnik, PhD thesis (TU Chemnitz, 2017)

K. Hoffmann, E. Krenn, G. Stanker: Fördertechnik 2: Maschinensätze, Fördermittel, Tragkonstruktionen, Logistik (Vieweg, Braunschweig, Wiesbaden 1998)

G. Reitor: Fördertechnik. Hebezeuge, Stetigförderer, Lagertechnik (Hanser, München, Wien 1993)

E. Zilich: Fördertechnik für Studium und Praxis. In: Mechanisch arbeitende Stetigförderer, Vol. 2 (Werner, Düsseldorf 1972)

P.W. Wypych: Introduction to pneumatic conveying, short course notes (2008)

R.D. Marcus, L.S. Leung, G.E. Klinzing, F. Rizk: Pneumatic conveying of solids, Vol. 507 (Chapman Hall, London 1990)

J.S. Mason: Introduction to pneumatic conveying. In: Von Karman Inst. Fluid Dyn. Gas-Solid Suspens., Vol. 1 (1976) p. 12, N79-19286 10-34

W. Chen: Rheology of aerated fine powders: Theories and application in pneumatic conveying systems, PhD thesis (Univ. Newcastle, Australia 2013)

K.C. Williams: Dense phase pneumatic conveying of powders: Design aspects and phenomena, Ph.D. thesis (Univ. Newcastle 2008)

UN: C.1 Test–UN manual of tests and criteria for transport of dangerous goods, section 37

D. Geldart: Types of gas fluidisation, Powder Technol. 7, 285–292 (1973)

O. Molerus: Interpretation of Geldart’s type A, B, C and D powders taking into account interparticle cohesion force, Powder Technol. 33, 81–87 (1982)

J.R. Grace: Contacting modes of behaviour classification of gas-solid and other two-phase suspensions, Can. J. Chem. Eng. 64, 353–363 (1986)

G. Dixon: The impact of powder properties on dense phase flow. In: Proc. Int. Conf. Pneum. Convey., London, UK (1979)

R. Pan: Material properties and flow modes in pneumatic conveying, Powder Technol. 104, 157–163 (1999)

N.J. Mainwaring, A.R. Reed: Permeability and air retention characteristics of bulk solid materials in relation to modes of dense phase pneumatic conveying, Bulk Solids Handl. 7(3), 415–425 (1987)

M.G. Jones: The influence of bulk particulate properties on pneumatic conveying performance, Ph.D. thesis (Thames Polytechnic, 1988)

A.J. Chambers, S. Keys, R. Pan: The influence of material properties on conveying characteristics. In: 6th International Conference on Bulk Materials Storage, Handling and Transportation, Wollongong, Australia (1998) pp. 309–319

C. Fargette, M.G. Jones, G. Nussbaum: Bench scale tests assessment of pneumatic conveying behavior of powders, Powder Handl. Process. 9(2), 103–110 (1997)

L. Sanchez, N. Vasquez, G.E. Klinzing, S. Dhodapkar: Characterization of bulk solids to assess dense phase pneumatic conveying, Powder Technol. 138, 93–117 (2003)

S. Barton: The effect of pipeline flow conditioning on dense phase pneumatic conveying (Glasgow Caledonian University, 1997)

J. Klintworth, R.D. Marcus: A review of low-velocity pneumatic conveying system, Bulk Solids Handl. 5(4), 747–753 (1995)

A. Lippert, E. Muschelknautz: Process for automatically separating a column of granular or pulverulent material. US Patent No 3240531 (1966)

H. Möller: Device for pneumatic and hydraulic feeding of bulk goods, US Patent No 4595317 (1986)

W. Merz: Conveyance system for transporting powdery or granular material. Swiss Aluminium Ltd., Chippis, Switzerland, US Patent No 4615648 (1984)

H. Rapp, W. Allenspach: Pipeline construction for pneumatic and hydraulic conveyance of solid material, US Patent No 3524478 (1970)

W. Stegmaier: Zur Berechnung der horizontalen pneumatischen Förderung feinkörniger Stoffe, Fördern Heb. 28, 363 (1978)

M. Weber: Principles of hydraulic and pneumatic conveying in pipes, Bulk Solids Handl. 1(1), 57–63 (1981)

J.S. Mason, D. Mills, R.A. Reed, C.R. Woodcock: Introduction to pneumatic conveying, Powder Eur. 80, 1–57 (1980)

D. Mills, J.S. Mason, R.B. Stacey: A design study for the pneumatic conveying of a fine particulate material. In: The Solids Handling Conference–Solidex 82, Harogate, England (1982) pp. C1–C75

P.W. Wypych, P.C. Arnold: On improving scale-up procedures for pneumatic conveying design, Powder Technol. 50, 281–294 (1987)

D. Mills: Pneumatic Conveying Design Guide (Elsevier, Oxford 2004)

D. Ilic, T.J. Hicks: Towards the development of design criteria for reduced wear in iron ore transfers. In: 17th Iron Ore Conf., ABM Week 2016, Rio De Janeiro, Brazil (2016)

T.J. Donohue, D. Ilic, R. Bell, L. Newman: The use of DEM in the design and analysis of WEARBACK transfer chutes, Aust. Bulk Handl. Rev. 11(12), 62–67 (2010)

D. Ilic, T. Donohue: Transfer chute analysis – Current practices involving continuum, DEM and practical validation. In: Aust. Bulk Handl. Rev., Vol. 1/2 (2012)

Ilic, D.: Bulk solid interactions in belt conveying systems, PhD thesis (Univ. Newcastle 2013)

A.W. Roberts: An investigation into the gravity flow of non-cohesive granular materials through discharge chutes, J. Eng. Ind. 91(2), 373–381 (1969)

A.W. Roberts: Chute design considerations for feeding and transfer. In: Proc. BeltCon 11 Conf., Randburg, Republic of South Africa (2001)

A.W. Roberts: Chute performance and design for rapid flow conditions, Chem. Eng. Technol. 26(2), 163–170 (2003)

A.W. Roberts, O.J. Scott: Flow of bulk solids through transfer chutes of variable geometry and profile, Bulk Solids Handl. 1(4), 715–727 (1981)

A.W. Roberts: Predicting abrasive wear in enclosed screw conveyors, Bulk Solids Powder Sci. Technol. 1, 32–43 (2004)

A.I. Hustrulid, G.W. Mustoe: Engineering analysis of transfer points using discrete element analysis. In: Proc. Annu. Meet. Soc. Min. Eng. (SME), Phoenix, AZ, 1996 (1996) pp. 9–13, Chap. 2

A.I. Hustrulid: Transfer station analysis. In: Proc. Annu. Meet. Soc. Min. Eng. (SME), Orlando, FL (1998) pp. 33–53

L.K. Nordell: Palabora installs curved transfer chute in hard rock to minimize belt cover wear, Bulk Solids Handl. 14(4), 739–743 (1994)

A. Katterfeld, T. Gröger, A. Minkin: Discrete element simulation of transfer stations and their verification, Bulk Solids Powder Sci. Technol. 2, 137–143 (2007)

F. Kessler, M. Prenner: DEM–Simulation of conveyor transfer chutes. In: FME Transactions, Vol. 37 (2009) pp. 185–192

D. Ilic, W. McBride, A. Katterfeld: Validation of continuum methods utilising discrete element simulations as applied to a slewing stacker transfer chute. In: 9th ICBMH 2007, Conf. Proc. (USB), Univ. Newcastle, Australia (2007)

A.P. Grima, P.W. Wypych: Discrete element simulations of granular pile formation: Method for calibrating discrete element models, Eng. Comput. 28(3), 314–339 (2011)MATH

C.J. Coetzee, D.N.J. Els: Calibration of discrete element parameters and the modelling of silo discharge and bucket filling, Comput. Electron. Agric. 65(2), 198–212 (2009)

C.J. Coetzee, D.N.J. Els: Calibration of granular material parameters for DEM modelling and numerical verification by blade-granular material interaction, J. Terramech. 46(1), 15–26 (2009)

Y.C. Chung, J. Ooi: Influence of discrete element model parameters on bulk behavior of a granular solid under confined compression, Part. Sci. Technol. 26(1), 83–96 (2008)

A. Katterfeld, C.J. Coetzee, T. Donohue, J. Fottner, A. Grima, Á. Ramírez-Gómez, D. Ilic, R. Kačianauskas, J. Necas, D. Schott, K. Williams, J. Zegzulka: White Paper: Calibration of DEM parameters for cohesionless bulk materials under rapid flow conditions and low consolidation (2019), https://doi.org/10.13140/RG.2.2.26318.31048/1

T. Roessler, C. Richter, A. Katterfeld, F. Will: Development of a standard calibration procedure for the DEM parameters of cohesionless bulk materials – Part I: Solving the problem of ambiguous parameter combinations, Powder Technol. 343, 803–812 (2019), https://doi.org/10.1016/j.powtec.2018.11.034CrossRef

M. Rackl, K.J. Hanley: A methodical calibration procedure for discrete element models, PowTech 307, 73–83 (2017)

H.Q. Do, A.M. Aragaon, D.L. Schott: Automated discrete element method calibration using genetic and optimization algorithms. In: Powders and Grains 2017, EPJ Web of Conferences, 140:15011 (2017)

C. Richter, T. Roessler, A. Katterfeld, F. Will: Development of a standard calibration procedure for the DEM parameters of cohesionless bulk materials – Part II: Efficient optimization-based calibration, Powder Technol. 360, 967–976 (2020), https://doi.org/10.1016/j.powtec.2019.10.052CrossRef

T. Roessler, A. Katterfeld: DEM parameter calibration of cohesive bulk materials using a simple angle of repose test, Particuology 45, 105–115 (2019), https://doi.org/10.1016/J.PARTIC.2018.08.005CrossRef

M. Carr, T. Roessler, H. Otto, C. Richter, A. Katterfeld, C.A. Wheeler, K. Williams, G. Elphick, K. Nettletone: Calibration procedure of discrete element method (DEM) – Parameters for cohesive bulk materials. In: Proc. ICBMH 2019. Gold Coast. Institution of Engineers Australia (2019)

M.J. Carr, W. Chen, K. Williams, A. Katterfeld: Comparative investigation on modelling wet and sticky material behaviours with a simplified JKR cohesion model and liquid bridging cohesion model in DEM. In: ICBMH 2016 Barton, A.C.T. Engineers Australia (2016)

D. Jodin, M. Hompel: Sortier- und Verteilsysteme: Grundlagen, Aufbau, Berechnung und Realisierung (Springer, Berlin, Heidelberg 2006)

DIN15401-1: Lasthaken für Hebezeuge; Einfachhaken; Rohteile (1982)

DIN15401-2: Lasthaken für Hebezeuge; Einfachhaken; Fertigteile mit Gewindeschaft (1983)

DIN15402-1: Lasthaken für Hebezeuge; Doppelhaken; Rohteile (1982)

DIN 15402-2: Lasthaken für Hebezeuge; Doppelhaken; Fertigteile mit Gewindeschaft (1983)

DIN 15 400: Lasthaken für Hebezeuge; Mechanische Eigenschaften, Werkstoffe, Tragfähigkeiten und vorhandene Spannungen (1990)

ISO 4779: Geschmiedete Ösenhaken aus Stahl zum Heben für den Einsatz in Rundstahlketten der Güteklasse M(4) (1986)

ISO 7597: Forged steel lifting hooks with latch, grade 8 (2013)

ISO 8539: Forged steel lifting components for use with Grade 8 chain (2009)

DIN 82017: Ladegeschirr – Zubehör- und Beschlagteile zum Heben – Ladehaken (2010)

DIN 15407-1: Lasthaken für Krane; Lamellen-Einfachhaken für Roheisen- und Stahlgießpfannen; Zusammenstellung, Hauptmaße (1977)

DIN 15407-2: Lasthaken für Krane; Lamellen-Einfachhaken für Roheisen- und Stahlgießpfannen; Einzelteile (1989)

DIN EN 10028-3: Flat products made of steels for pressure purposes–Part 3: Weldable fine grain steels, normalized (2017)

VDE 0580: Elektromagnetische Geräte und Komponenten – Allgemeine Bestimmungen (2011)

ISO 17096: Cranes–Safety–Load lifting attachments (2015)

FEM 9.511: Berechnungsgrundlagen für Serienhebezeuge (1986)

FEM 9.661: Berechnungsgrundlagen für Serienhebezeuge – Baugrößen und Ausführung von Seiltrieben (1986)

FEM 9.901: Berechnungsgrundlagen für Serienhebezeuge und Krane mit Serienhebezeugen (1991)

DIN EN 14492-2: Cranes–Power driven winches and hoists–Part 2: Power driven hoists (2010)

DIN 15001-1: Krane; Begriffe, Einteilung nach der Bauart (1973)

DIN EN 13001: Cranes–Part 1–3 (2012)

DIN 15018: Krane; Grundsätze für Stahltragwerke; Berechnung von Fahrzeugkranen (1984)

ISO 20332: Cranes–Proof of competence of steel structures (2016)

O. Kempkes, J. Scholten, G. Wagner: Europäische Krannorm DIN EN 13 001–Wege zur Konstruktion sicherer und wirtschaftlicher Krane, Hebezeug Fördermittel, Vol. 7–8 (HUSS-Medien, Berlin 2005) pp. 356–358

M. Golder: Die praktische Anwendung der EN 13 001 am Beispiel von Brückenkrananlagen. In: 12. Int. Kranfachtagung, Tagungsband, ed. by G. Wagner, J. Scholten (Selbstverlag der Ruhr-Universität Bochum, Bochum 2004)

DIN 15030: Hebezeuge; Abnahmeprüfung von Krananlagen, Grundsätze (1977)

D. Smolyaninov, P. Horn, F. Krause, F. Palis: Ergebnisse der Untersuchungen zur Pendeldämpfung bei Drehkranen. In: 11. Internationale Kranfachtagung, Tagungsbeiträge, ed. by H.-G. Marquardt (Selbstverlag der TU Dresden, Dresden 2003)

DIN EN 15011: Cranes–Bridge and gantry cranes (2014)

DIN EN 13001-2: Crane safety–General design–Part 2: Load actions (2014)

ISO 12488-1: Cranes–Tolerances for wheels and travel and traversing tracks–Part 1: General (2012)

I. Brötzmann: Portalkrane – Einsatzgebiete, Arbeitsaufgaben und Problemlösungen. In: 12. Internationale Kranfachtagung, Tagungsband, ed. by G. Wagner, J. Scholten (Selbstverlag Ruhr-Universität Bochum, Bochum 2004)

T. Koch: Einsatz automatisierter Krananlagen im Yard des Container-Terminals Altenwerder – Funktion und erste Betriebserfahrungen. In: 12. Int. Kranfachtagung, Tagungsband, ed. by G. Wagner, J. Scholten (Selbstverlag der Ruhr-Universität Bochum, Bochum 2004)

Traunitz, W.: Seeschiffsentlader mit automatischer Steuerung. Siemens-Zeitung 48(2) (1974)

K. Malcher, T. Nogiec: Wippdrehkrane: Lastausgleich bei idealem Lastweg, Fördern Heb. 34(3), 150–152 (1986)

DIN EN 13000: Cranes–Mobile Cranes (2014)

G. Wagner, J. Scholten: Neue Entwicklungstendenzen in der Fördertechnik, Hebezeug Förderm. 6, 262–264 (2003)

O. Fries: Traglaststeigernde Systeme für Fahrzeugkranausleger. In: 11. Int. Kranfachtagung, Tagungsband, ed. by H.-G. Marquardt (Selbstverlag der TU Dresden, Dresden 2003)

DIN EN 12999: Cranes–Loader cranes (2013)

DIN EN 13852-1: Cranes–Offshore cranes–Part 1: General-purpose offshore cranes (2014)

DIN EN 13852-2: Krane – Offshore-Krane – Teil 2: Schwimmende Krane (2015)

G. Kunze, H. Göhrung, K. Jacob, M. Scheffler (Eds.): Baumaschinen Erdbau- und Tagebaumaschinen (Vieweg, Braunschweig 2003)

G. Heß, C. Richter, A. Katterfeld: Simulation of the dynamic interaction between bulk material and heavy equipment–calibration and validation. In: ICBMH 2016. 12th Int. Conf. Bulk Mater. Storage Handl. Transp.; Proceedings; Darwin, Australia, 11–14 July 2016, ed. by D. Hastie (The Institution of Engineers, Australia, Barton 2016) pp. 427–436

G. Kunze, A. Katterfeld, C. Richter, H. Otto, C. Schubert: Plattform- und softwareunabhängige Simulation der Erdstoff-Maschine Interaktion. In: Fachtagung Baumaschinentechnik Dresden (2012)

C. Holländer: Untersuchungen zur Beurteilung und Optimierung von Baggerhydrauliksystemen, Fortschritt-Ber. VDI Reihe 1, Vol. 307 (VDI, Düsseldorf 1998)

M. Dratt, A. Katterfeld: Coupling of FEM and DEM simulations to consider dynamic deformations under particle load. In: Granular Matter, Vol. 19 (Springer, Berlin 2017), Art. 49

DIN 24080: Earth-Moving Machinery (1979), withdrawn

J. Forche: Antriebsmanagement für Hydraulikbagger, Baumaschinentechnik 26, 33–40 (2004)

J. Weber, E. Lautner: Intelligente Baumaschinensteuerungen und alternative Antriebssysteme. In: Baumaschinentechnik 2004, Schriftenreihe der Forschungsvereinigung Bau- und Baustoffmaschinen, Vol. 26 (2004) pp. 41–48

DIN EN ISO 3164: Earth-moving machinery–Laboratory evaluations of protective structures–Specifications for deflection-limiting volume (2013)

DIN EN ISO 3449: Erdbaumaschinen – Schutzaufbauten gegen herabfallende Gegenstände – Prüfungen und Anforderungen (2009)

DIN EN ISO 3471: Earth-moving machinery–Roll-over protective structures–Laboratory tests and performance requirements (2010)

G.R. Strakosch (Ed.): The Vertical Transportation Handbook, 3rd edn. (Wiley, New York 1998)

M. Scheffler, K. Feyrer, K. Matthias: Fördermaschinen – Hebe- und Flurförderzeuge (Vieweg, Wiesbaden 1998)

ISO 4190-1: Lift (elevator) installation–Part 1: Class I, II, III and VI lifts (2010)

EN 81: Safety rules for the construction and installation of lifts (2016)

DIN ISO 5053-1:2015-11: Industrial trucks-Terminology and classification-Part 1: Types of industrial trucks (2015)

DIN ISO 5053-2: Industrial trucks–Terminology and classification–Part 2: Fork arms and attachements (2017)

DIN 15172:1988-12: Powered industrial trucks; tractors and other trucks used for hauling trailers; traction force, trailer load (1988)

R.G.T. Lindkvist: Handbook of Materials Handling, Ellis Horwood Series in Applied Science and Industrial Technology (Ellis Horwood, Chichester 1985)

VDI 2516:2003-09: Floor conveyors for storage and retrieval-Cycle time calculation in narrow aisles (2003)

DIN EN 1525:1997-12: Safety of industrial trucks-Driverless trucks and their systems (1997)

VDI 2510:2005-10: Automated Guided Vehicle Systems (AGVS) (2005)

VDI 2710:2010-04: Interdisciplinary design of automated guided vehicle systems (AGVS) (2010)

G. Ullrich: Automated Guided Vehicle Systems–A Primer with Practical Applications, Vol. 2 (Springer Vieweg, Heidelberg, New York 2015)

B. Brinkmann: Seehäfen – Planung und Entwurf (Springer, Berlin, Heidelberg 2005)

J.R. Johanson: Method of calculating rate of discharge from hoppers and bins, Trans. Min. Eng. AIME 232, 69–80 (1965)

P.C. Arnold, A.G. McLean, A.W. Roberts: Bulk Solids: Storage, Flow and Handling (TUNRA, Newcastle 1982)

A.W. Roberts: Modern Concepts in the Design and Engineering of Bulk Solids Handling Systems (TUNRA Bulk Solids Research, Newcastle 1988)

J.R. Johanson: The use of flow-corrective inserts in bins, J. Eng. Ind. 88(2), 224–230 (1966)

J.R. Johanson: Controlling flow patterns in bins by the use of an insert, Int. J. Bulk Solids Handl. 2(3), 495–498 (1982)MathSciNet

A.W. Roberts: Vibrations of powders and bulk solids. In: Handbook on Powder Science and Technology (Van Nostrand, New York 1984), Chap. 6

A.W. Roberts, M. Ooms, O.J. Scott: Influence of vibrations on the strength and boundary friction characteristics of bulk solids and the effect on bin design, Int. J. Bulk Solids Handl. 6(1), 161–169 (1986)

A.W. Roberts, F.J.C. Rademacher: Induced gravity flow by mechanical vibrations. In: 11th Annu. Powder Bulk Solids Conf., Chicago, USA, 12–15 May 1986 (1986) pp. 58–74

M. Terziovski, P.C. Arnold: On the effective sizing and placement of air blasters, Int. J. Bulk Solids Handl. 10(2), 181–185 (1990)

AS 3774: Loads on Bulk Solids Containers (Standards Association of Australia, Sydney 1996)

EN 1991-4: Eurocode 1 actions on structures, Part 4 silos and tanks (2006)

J.Y. Ooi, L. Pham, J.M. Rotter: Systematic and random features of measured pressures on full-scale silo walls, Eng. Struct. 12(2), 74–87 (1990)

A. Ramírez, J. Nielsen, F. Ayuga: Pressure measurements in steel silos with eccentric hoppers, Powder Technol. 201(1), 7–20 (2010)

P. Vidal, E. Gallego, M. Guaita, F. Ayuga: Finite element analysis under different boundary conditions of the filling of cylindrical steel silos having an eccentric hopper, J. Construct. Steel Res. 64(4), 480–492 (2008)

B. Chen, A. Roberts, T. Donohue: DEM modelling of silo loads asymmetry induced by eccentric discharge, presents the state of art of discrete element methods, Springer Proc. Phys. 188, 1133–1141 (2017)MATH

C.M. Wensrich: Analytical and numerical modelling of quaking in tall silos, PhD thesis (Univ. Newcastle, Newcastle, 2002)

A.W. Roberts: Rathole Geometry and Draw-Down During Funnel-Flow in Bins and Gravity Reclaim Stockpiles, Bulk Solids Handling (Systems and Design) Notes (Centre for Bulk Solids and Particulate Technologies, Newcastle 2000) pp. 609–618

W. McBride: Effective gravity reclaim stockpile design, Bulk Solids Handling (Systems and Design) Notes (Centre for Bulk Solids and Particulate Technologies, Newcastle 2000) pp. 635–644

A.W. Roberts, W. Mc. Bride: Predicting the Performance of Gravity Reclaim Stockpiles, Bulk Solids Handling (Systems and Design) Notes (Centre for Bulk Solids and Particulate Technologies, Newcastle 2000) pp. 645–652

A.W. Roberts: Design Considerations for Maximum Reclaim Capacity of Gravity Reclaim Stockpiles, Bulk Solids Handling (Systems and Design) Notes (Centre for Bulk Solids and Particulate Technologies, Newcastle 2000) pp. 653–675

W. McBride: Mechanics of bulk solids stockpiles, Ph.D. thesis (Univ. Newcastle, 2001)

A.W. Roberts: Dynamic modelling of bulk solids storage, discharge and handling systems, Bulk Solids Handl. 20(2), 183–189 (2000)

A.W. Roberts: Loads on support structural elements buried in stockpiles, Part. Part. Syst. Charact. 24, 352–359 (2007)

E. Frazelle: World-Class Warehousing and Material Handling, Vol. 1 (McGraw-Hill, New York 2001)

H. Martin: Transport- und Lagerlogistik: Systematik, Einsatz und Wirtschaftlichkeit (Springer Vieweg, Wiesbaden 2016)

K. Bichler, G. Riedel, F. Schöppach: Kompakt Edition: Lagerwirtschaft – Grundlagen, Technologien und Verfahren (Springer Gabler, Wiesbaden 2013)

DIN EN 15629:2010-09: Steel static storage systems-Specification of storage equipment (2010)

DIN EN 15512:2010-09: Steel static storage systems-Adjustable pallet racking systems-Principles for structural design (2010)

DIN EN 15620:2010-05: Steel static storage systems-Adjustable pallet racking-Tolerances, deformations and clearances (2010)

VDI 3561: Determination of cycle timesfor automated channel-type storage systems (2009)

VDI 3658: Equipment for inter-aisle transfer of storage and retrieval machines (1993)

M. ten Hompel, T. Schmidt, L. Nagel: Materialflusssysteme, Förder- und Lagertechnik, 3rd edn. (Springer, Berlin, Heidelberg 2007)

Title: Conveying and Construction Machinery
Authors: André Katterfeld
Alan Roberts
Craig Wheeler
Kenneth Williams
Chris Wensrich
Jan Scholten
Mark Jones
Günter Kunze
Henning Strubelt
Dusan Ilic
Tim Donohue
Hendrik Otto
Jens Sumpf
Wei Chen
Bin Chen
Daniel Ausling
Publisher: Springer International Publishing
Book: Springer Handbook of Mechanical Engineering
Print ISBN: 978-3-030-47034-0

Electronic ISBN: 978-3-030-47035-7

Copyright Year: 2021
DOI: https://doi.org/10.1007/978-3-030-47035-7_20

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners