The legend of the former version of Figure 3 applies only to panels (b) and (c). The shear rates and symbols are different for panel (a). The legend of the amended version of Figure 3 correctly reports the shear rates and symbols for the three panels (a), (b) and (c).
Fig. 3
Start-up shear tests performed on a H4A1A at T = 140 °C, b H3A1A-O2 at T = 100 °C, c H5A1-O2 at T = 100 °C. Shear rates in s− 1 are reported in the legend. The data in gray color were measured at 115 °C and shifted to 100 °C by means of the shift factors of Fig. 1b
×
The original article has been corrected.
Open AccessThis article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
