Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Materials Engineering and Performance
Published in: Journal of Materials Engineering and Performance 9/2015

01-09-2015

Corrosion Behavior of Ultra-fine Grained 1050 Aluminum Alloy Fabricated by ARB Process in a Buffer Borate Solution

Authors: A. Fattah-alhosseini, S. O. Gashti

Published in: Journal of Materials Engineering and Performance | Issue 9/2015

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Accumulative roll bonding (ARB) has been used as a severe plastic deformation process for the industrial production of ultra-fine grained (UFG) and nano-crystalline sheets with excellent mechanical properties. In the present study, the effect of the ARB process on the corrosion behavior of UFG and nano-crystalline 1050 aluminum alloy in a buffer borate solution (pH 5.5) has been investigated. The result of microhardness tests revealed that microhardness values increase with an increasing number of ARB cycles. A sharp increase in microhardness is seen after three ARB cycles, whereas moderate additional increases are observed afterward for up to nine cycles. Also, the XRD results showed that the mean crystallite size decreased to about 91 nm after nine cycles. The potentiodynamic plots show that as a result of ARB, the corrosion behavior of the UFG and nano-crystalline specimens improves, compared to the annealed 1050 aluminum alloy. Moreover, electrochemical impedance spectroscopy measurements showed that the polarization resistance increases with an increasing number of ARB cycles.
previous article Insulation Performance of Heat-Resistant Material for High-Speed Aircraft Under Thermal Environments
next article Thermal Conductivities and Thermal Expansion Coefficients of (Sm0.5Gd0.5)2(Ce1−x Zr x )2O7 Ceramics

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
M. Raei, M.R. Toroghinejad, R. Jamaati, and J.A. Szpunar, Effect of ARB Process on Textural Evolution of AA1100 Aluminum Alloy, Mater. Sci. Eng. A, 2010, 527, p 7068–7073CrossRef
2.
S. Pasebani and M.R. Toroghinejad, Nano-grained 70/30 Brass Strip Produced by Accumulative Roll-Bonding (ARB) Process, Mater. Sci. Eng. A, 2010, 527, p 491–497CrossRef
3.
S. Pasebani, M.R. Toroghinejad, M. Hosseini, and J. Szpunar, Textural Evolution of Nano-grained 70/30 Brass Produced by Accumulative Roll-Bonding, Mater. Sci. Eng. A, 2010, 527, p 2050–2056CrossRef
4.
R. Jamaati, M.R. Toroghinejad, and H. Edris, Effect of Stacking Fault Energy on Nanostructure Formation Under Accumulative Roll Bonding (ARB) Process, Mater. Sci. Eng. A, 2013, 578, p 191–196CrossRef
5.
F. Salimyanfard, M.R. Toroghinejad, F. Ashrafizadeh, M. Hoseini, and J.A. Szpunar, Investigation of Texture and Mechanical Properties of Copper Processed by New Route of Equal Channel Angular Pressing, Mater. Des., 2013, 44, p 374–381CrossRef
6.
M.R. Rezaei, M.R. Toroghinejad, and F. Ashrafizadeh, Effects of ARB and Ageing Processes on Mechanical Properties and Microstructure of 6061 Aluminum Alloy, J. Mater. Proc. Tech., 2011, 211, p 1184–1190CrossRef
7.
R. Jamaati, M.R. Toroghinejad, and A. Najafizadeh, An Alternative Method of Processing MMCs by CAR Process, Mater. Sci. Eng. A, 2010, 527, p 2720–2724CrossRef
8.
H. Miyamoto, K. Harada, T. Mimaki, A. Vinogradov, and S. Hashimoto, Corrosion of Ultra-fine Grained Copper Fabricated by Equal-Channel Angular Pressing, Corros. Sci., 2008, 50, p 1215–1220CrossRef
9.
R. Jamaati, M.R. Toroghinejad, and A. Najafizadeh, Application of Anodizing and CAR Processes for Manufacturing Al/Al2O3 Composite, Mater. Sci. Eng. A, 2010, 527, p 3857–3863CrossRef
10.
M. Kadkhodaee, M. Babaiee, H. Danesh Manesh, M. Pakshir, and B. Hashemi, Evaluation of Corrosion Properties of Al/Nanosilica Nanocomposite Sheets Produced by Accumulative Roll Bonding (ARB) Process, J. Alloys Compd., 2013, 576, p 66–71CrossRef
11.
W. Wei, K.X. Wei, and Q.B. Du, Corrosion and Tensile Behaviors of Ultra-fine grained Al-Mn Alloy Produced by Accumulative Roll Bonding, Mater. Sci. Eng. A, 2007, 454-455, p 536–541CrossRef
12.
K.C. Emregul and A.A. Aksut, The Behavior of Aluminum in Alkaline Media, Corros. Sci., 2000, 42, p 2051–2067CrossRef
13.
S.S. Abdel Rehim, H.H. Hassan, and M.A. Amin, Corrosion and Corrosion Inhibition of Al and Some Alloys in Sulphate Solutions Containing Halide Ions Investigated by an Impedance Technique, Appl. Surf. Sci., 2002, 187, p 279–290CrossRef
14.
K. Ishii, R. Ozaki, K. Kaneko, H. Fukushima, and M. Masuda, Continuous Monitoring of Aluminum Corrosion Process in Deaerated Water, Corros. Sci., 2007, 49, p 2581–2601CrossRef
15.
X.X. Zeng, J.M. Wang, Q.L. Wang, D.S. Kong, H.B. Shao, J.Q. Zhang, and C.N. Cao, The Effects of Surface Treatment and Stannate as an Electrolyte Additive on the Corrosion and Electrochemical Performances of Pure Aluminum in an Alkaline Methanol-water solution, Mater. Chem. Phys., 2010, 121, p 459–464CrossRef
16.
F. Rosalbino, S. Delsante, G. Borzone, and E. Angelini, Influence of Rare Earth Metals on the Characteristics of Anodic Oxide Films on Aluminium and Their Dissolution Behaviour in NaOH Solution, Corros. Sci., 2010, 52, p 322–326CrossRef
17.
B. Zhang, Y. Li, and F. Wang, Electrochemical Corrosion Behaviour of Microcrystalline Aluminium in Acidic Solutions, Corros. Sci., 2007, 49, p 2071–2082CrossRef
18.
M.F. Naeini, M.H. Shariat, and M. Eizadjou, On the Chloride-Induced Pitting of Ultra Fine Grains 5052 Aluminum Alloy Produced by Accumulative Roll Bonding Process, J. Alloys Compd., 2011, 509, p 4696–4700CrossRef
19.
E. Akiyama, Z. Zhang, Y. Watanabe, and K. Tsuzaki, Effects of Severe Plastic Deformation on the Corrosion Behavior of Aluminum Alloys, J. Solid State Electrochem., 2009, 13, p 277–282CrossRef
20.
A. Shabani, M.R. Toroghinejad, and A. Shafyei, Effect of Post-rolling Annealing Treatment and Thickness of Nickel Coating on the Bond Strength of Al-Cu Strips in Cold Roll Bonding Process, Mater. Des., 2012, 40, p 212–220CrossRef
21.
E. Darmiani, I. Danaee, M.A. Golozar, M.R. Toroghinejad, A. Ashrafi, and A. Ahmadi, Reciprocating Wear Resistance of Al-SiC Nano-composite Fabricated by Accumulative Roll Bonding Process, Mater. Des., 2013, 50, p 497–502CrossRef
22.
M. Raei, M.R. Toroghinejad, and R. Jamaati, Nano/Ultrafine Structured AA1100 by ARB Process, Mater. Manufact. Proc., 2011, 26, p 1–5CrossRef
23.
M.R. Toroghinejad, F. Ashrafizadeh, and R. Jamaati, On the Use of Accumulative Roll Bonding Process to Develop Nanostructured Aluminum Alloy 5083, Mater. Sci. Eng. A, 2013, 561, p 145–151CrossRef
24.
M. Eizadjou, H. Danesh Manesh, and K. Janghorban, Microstructure and Mechanical Properties of Ultra-fine Grains (UFGs) Aluminum Strips Produced by ARB Process, J. Alloys Compd., 2009, 474, p 406–415CrossRef
25.
G.T. Burstein, A Hundred Years of Tafel’s Equation: 1905-2005, Corros. Sci., 2005, 47, p 2858–2870CrossRef
26.
E. Darmiani, I. Danaee, M.A. Golozar, and M.R. Toroghinejad, Corrosion Investigation of Al-SiC Nano-composite Fabricated by Accumulative Roll Bonding (ARB) Process, J. Alloys Compd., 2013, 552, p 31–39CrossRef
27.
Y. Liu, G.Z. Meng, and Y.F. Cheng, Electronic Structure and Pitting Behavior of 3003 Aluminum Alloy Passivated Under Various Conditions, Electrochim. Acta, 2009, 54, p 4155–4163CrossRef
28.
A. Ehsani, M. Nasrollahzadeh, M. Ghasem Mahjani, R. Moshrefi, and H. Mostaanzadeh, Electrochemical and Quantum Chemical Investigation of Inhibitory of 1,4-Ph(OX)2(Ts)2 on Corrosion of, Aluminum Alloy in Acidic Medium, J. Ind. Eng. Chem., 1005, 20(2014), p 4363–4370
29.
A. Fattah-alhosseini and S.O. Gashti, Effect of pH on the Passive Behavior of 6061 Al Alloy in Borate Buffer Solutions, Anal. Bioanal. Electrochem., 2015, 7, p 35–44
30.
A. Nikfahm, I. Danaee, A. Ashrafb, and M.R. Toroghinejad, Effect of Grain Size Changes on Corrosion Behavior of Copper Produced by Accumulative Roll Bonding Process, Mater. Res., 2013, 16, p 1379–1386CrossRef
31.
K.T. Aust, U. Erb, and G. Palumbo, Interface Control for Resistance to Intergranular Cracking, Mater. Sci. Eng. A, 1994, 176, p 329–334CrossRef
32.
M. Eizadjou, H. Danesh Manesh, and K. Janghorban, Investigation of Roll Bonding Between Aluminum Alloy Strips, Mater. Des., 2008, 29, p 909–913CrossRef
33.
M. Eizadjou, H. Danesh Manesh, and K. Janghorban, Mechanism of Warm and Cold Roll Bonding of Aluminum Alloy Strips, Mater. Des., 2009, 30, p 4156–4161CrossRef
34.
S.S. Satheesh and T. Kumar, Raghu, Structural and Mechanical Behaviour of Severe Plastically Deformed High Purity Aluminium Sheets Processed by Constrained Groove Pressing Technique, Mater. Des., 2014, 57, p 114–120CrossRef
35.
F. Khodabakhshi, M. Kazeminezhad, and A.H. Kokabi, Constrained Groove Pressing of Low Carbon Steel: Nano-structure and Mechanical Properties, Mater. Sci. Eng. A, 2010, 527, p 4043–4049CrossRef
36.
F. Khakbaz and M. Kazeminezhad, Work Hardening and Mechanical Properties of Severely Deformed AA3003 by Constrained Groove Pressing, J. Manuf. Proc., 2012, 14, p 20–25CrossRef
37.
O. Imantalab and A. Fattah-alhosseini, Electrochemical and Passive Behaviors of Pure Copper Fabricated by Accumulative Roll-Bonding (ARB) Process, J. Mater. Eng. Perform., 2015, 24, p 2579–2585CrossRef
38.
M. Pourbaix, Atlas of Electrochemical Equilibria in Aqueous Solutions, 2nd ed., NACE, Houston, 1974
Metadata
Title
Corrosion Behavior of Ultra-fine Grained 1050 Aluminum Alloy Fabricated by ARB Process in a Buffer Borate Solution
Authors
A. Fattah-alhosseini
S. O. Gashti
Publication date
01-09-2015
Publisher
Springer US
Published in
Journal of Materials Engineering and Performance / Issue 9/2015
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-015-1627-6

Other articles of this Issue 9/2015

Journal of Materials Engineering and Performance 9/2015 Go to the issue

OriginalPaper

Effects of Ultra Fast Cooling on Microstructure and Mechanical Properties of Pipeline Steels

OriginalPaper

Processing and Characterization of Novel Biomimetic Nanoporous Bioceramic Surface on β-Ti Implant by Powder Mixed Electric Discharge Machining

OriginalPaper

Electrochemical Study on the Inhibition Effect of Phenanthroline and Its Cobalt Complex as Corrosion Inhibitors for Mild Steel

OriginalPaper

Quantitative Image Analysis of Ni-P Coatings Deposited on Carbon Fibers

OriginalPaper

Increase in Strength of Partially Stabilized Zirconia After Shot Peening

OriginalPaper

A New Method for Controlling Billet Temperature During Isothermal Die Forging of a Complex Superalloy Casing

Premium Partners

    Image Credits