Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Metallurgical and Materials Transactions B
Published in: Metallurgical and Materials Transactions B 1/2017

15-09-2016

Corrosion Performance of Fe-Based Alloys in Simulated Oxy-Fuel Environment

Authors: Zuotao Zeng, Ken Natesan, Zhonghou Cai, David L. Rink

Published in: Metallurgical and Materials Transactions B | Issue 1/2017

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The long-term corrosion of Fe-based alloys in simulated oxy-fuel environment at 1023 K (750 °C) was studied. Detailed results are presented on weight change, scale thickness, internal penetration, microstructural characteristics of the corrosion products, and the cracking of scales for the alloys after exposure at 1023 K (750 °C) for up to 3600 hours. An incubation period during which the corrosion rate was low was observed for the alloys. After the incubation period, the corrosion accelerated, and the corrosion process followed linear kinetics. Effects of alloy, CaO-containing ash, and gas composition on the corrosion rate were also studied. In addition, synchrotron nanobeam X-ray analysis was employed to determine the phase and chemical composition of the oxide layers on the alloy surface. Results from these studies are being used to address the long-term corrosion performance of Fe-based alloys in various coal-ash combustion environments and to develop methods to mitigate high-temperature ash corrosion.
previous article Electrodeposition of Sn-Ni Alloy Coatings for Water-Splitting Application from Alkaline Medium
next article Effect of Current Frequency on Droplet Evolution During Magnetic-Field-Controlled Electroslag Remelting Process Via Visualization Method

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
2.
3.
4.
Z. Zeng, K. Natesan, Z. Cai, D. Gosztola, R. Cook, and J. Hiller: J. Mater. Eng. Perf., 2014, vol. 23, pp. 1247–62.CrossRef
5.
D. Fleig, K. Andersson, F. Normann, and F. Johnsson: Ind. Eng. Chem. Res., 2011, vol. 50, pp. 8505–14.CrossRef
6.
Z. Zurek, J. Gilewicz-Wolter, M. Hetmanczyk, J. Dudala, and A. Stawiarski: Oxid. Met., 2012, vol: 78, pp. 1–16.CrossRef
7.
R. Stanger, and T. Wall: Prog. Ener. Combust. Sci., 2011, Vol. 37, pp. 69–88.CrossRef
8.
9.
10.
B.A. Baker, and G.D. Smith: NACE annual conference, 2004, Paper 04526.
11.
H. Hack, and G. Stanko: Advances in Materials Technology for Fossil Power Plants, ASM International, Materials Park, 2008, pp. 488–506.
12.
M.S. Gagliano, H. Hack, and G. Stanko: 33rd international technical conference on coal utilization and fuel systems, 2008.
13.
P. Castello, V. Guttmann, N. Farr, and G. Smith: Mater. Corros., 2000, vol. 51, pp. 786–90.CrossRef
14.
J.L. Blough, and G.J. Stanko: NACE International, Corrosion, 1997, Paper No. 140.
15.
S. Henry, A. Galerie, and L. Antonic: Mater. Sci. Forum, 1999, vol. 353, pp. 369–72.
16.
S. Zhao, X. Xie, G.D. Smith, and S.J. Patel: Mater. Chem. Phys., 2005, vol. 90, pp. 275–81.CrossRef
17.
J.M. Brossard, I. Diop, X. Chaucherie, F. Nicol, C. Rapin, and M. Vilasi: Mater. Corros., 2011, vol. 62, pp. 543–48.CrossRef
18.
Z. Zeng, K. Natesan, Z. Cai, and D.L. Rink: Fuel, 2014, vol. 117, pp. 133–45.CrossRef
19.
G.R. Holcomb, J. Tylczak, G. H. Meier, B.S. Lutz, K. Jung, N. Mu, N.M. Yanar, F.S. Pettit, J. Zhu, A. Wise, D.E. Laughlin, and S. Sridhar: Oxid. Met., 2013, vol. 80, pp. 599–610.CrossRef
20.
21.
K. Natesan, Z. Zeng, and D.L. Rink: Proceedings of the 24rd annual conference on fossil energy materials, 2010.
22.
K. Natesan, Z. Zeng, and D.L. Rink: Proceedings of the 25th annual conference on fossil energy materials, 2011.
23.
K. Natesan, and Z. Zeng: Proceedings of 26th annual conference on fossil energy materials, 2012.
24.
G. Stein-Brzozowska, J. Maier, and G. Scheffknecht, Ener. Procedia 2011, vol. 4, pp. 2035–42.CrossRef
25.
B.S. Lutz, G.R. Holcomb, G.H. Meier, Oxid. Met., 2015, Vol. 84, pp. 353-381.CrossRef
26.
T. Dudziak, T. Hussain, N.J. Simms, et al. Corr. Sci., 2014, Vol. 79, pp. 184–191.CrossRef
27.
G. Stein-Brzozowska, H. Diaz, J. Maier, et al. Energy Procedia, 2013, Vol. 37, pp. 1462–70.CrossRef
28.
L. Elliott, T. Wall, S. Khan, R. Rathnam, Y. Liu, and R. Gupta: ACARP, University of Newcastle, Callaghan, 2006.
29.
T. Suko, T. Yamada, M. Tamura, and T. Fujimori: Pilot Scale Studies to Support Oxy-fuel Feasibility, Cooperative Research Center for Coal in Sustainable Development, 2006.
30.
S. Schnurrer, L. Elliott, and T. Wall: 7th International symposium on gas cleaning at high temperatures, Shoal Bay, 2008.
31.
A. Robertson, H. Agarwal, M. Gagliano, and A. Seltzer, 37th international technical conference on clean coal and fuel systems, Clearwater, 2012.
32.
D. K. Louic, P. Eng. Handbook of Sulphuric acid manufacturing, DKL Engineering, Inc., Richmond Hill, 2005.
33.
Z. Zeng, K. Natesan, Z. Cai, and S.B. Darling, Nature Mater., 2008, vol. 7, pp. 641–6.CrossRef
34.
M. Benlyamani, F. Ajersch, and G. Kennedy: Oxid. Met., 1988, vol. 29, pp. 203.CrossRef
35.
E.J. Badin: Coal Combustion Chemistry: Corrosion Aspects, Elsevier, Amsterdam, 1984.
36.
Babcock & Wilcox Co., Steam: Its Generation and Use, Babcock & Wilcox Co., New York, 1978.
37.
A. Kucuk and M.S. Gulaboglu: Ind. Eng. Chem. Res., 2002, vol. 41, pp. 6028–32.CrossRef
38.
W.W. Rudolph, R. Mason, and P. Schmidt: Eur. J. Miner., 2003, vol. 15, pp. 913–24.CrossRef
39.
40.
Brunner D. R. The Composition and Distribution of Coal-Ash Deposits Under Reducing and Oxidizing Conditions From a Suite of Eight Coals, thesis of Brigham Young University, 2011.
41.
H. Liu, S. Katagiri, and K. Okazaki, Energy & Fuels, 2001, vol. 15, pp. 403–12.CrossRef
Metadata
Title
Corrosion Performance of Fe-Based Alloys in Simulated Oxy-Fuel Environment
Authors
Zuotao Zeng
Ken Natesan
Zhonghou Cai
David L. Rink
Publication date
15-09-2016
Publisher
Springer US
Published in
Metallurgical and Materials Transactions B / Issue 1/2017
Print ISSN: 1073-5615
Electronic ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-016-0796-5

Other articles of this Issue 1/2017

Metallurgical and Materials Transactions B 1/2017 Go to the issue

OriginalPaper

MTDATA and the Prediction of Phase Equilibria in Oxide Systems: 30 Years of Industrial Collaboration

OriginalPaper

Viscosity Measurement and Structure Analysis of Cr2O3-Bearing CaO-SiO2-MgO-Al2O3 Slags

OriginalPaper

LBM-LES Simulation of the Transient Asymmetric Flow and Free Surface Fluctuations under Steady Operating Conditions of Slab Continuous Casting Process

OriginalPaper

Rapid Dissolution of Quicklime into Molten Slag by Internally Formed Gas

Symposium

A Dynamic Flux Dissolution Model for Oxygen Steelmaking

OriginalPaper

A 2D Axisymmetric Mixture Multiphase Model for Bottom Stirring in a BOF Converter

Premium Partners

    Image Credits