Skip to main content
Top

2006 | OriginalPaper | Chapter

12. Corrosion

Authors : Bernd Isecke, Dr., Michael Schütze, Prof., Hans-Henning Strehblow, Dr.

Published in: Springer Handbook of Materials Measurement Methods

Publisher: Springer Berlin Heidelberg

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Corrosion is defined as the interaction between a metal and its environment that results in changes in the properties of the metal, and which may lead to significant impairment of the function of the metal. In most cases the interaction between the metal and the environment is an electrochemical reaction where thermodynamic and kinetic considerations apply. Depending on the characteristics of the corrosion system various types of corrosion occur.
In this chapter all test methods available today are described. For scientific purposes as well as investigations in the laboratory so called conventional electrochemical test methods with direct current are primarily used (Sect. 12.1). In addition, newer techniques have been proposed (Sect. 12.1) that are based on dynamic system analysis (Sect. 12.2.1) or that allow study of corrosion processes in situ with spatial resolution down to 20 μm (Sects. 12.2.2 and 12.2.3). In the following sections a distinction has been made between testing for performance of corrosion protection measures such as inhibitors (Sect. 12.8) and testing that focuses on specific types of corrosion. In this context it is advisable to differentiate between corrosion without (Sect. 12.4) and with mechanical loading (Sect. 12.5) including hydrogen-assisted cracking (Sect. 12.6) which has some similarities to stress corrosion. High-temperature oxidation (Sect. 12.6) has a different mechanistic background than electrolytic corrosion because it is an oxidation process at a metal/gas or metal/salt solution interface. Exposure and on-site testing (monitoring) require specific considerations in the design of test facilities, probes and the interpretation of results (Sect. 12.4).
Appendix Part D provides a list of standards related to the various sections of this chapter. Another important source of information regarding corrosion testing is that edited by Baboian [12.1].

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
12.1.
go back to reference R. Baboian: Corrosion Tests and Standards (ASTM, Philadelphia 1995) R. Baboian: Corrosion Tests and Standards (ASTM, Philadelphia 1995)
12.2.
go back to reference DIN EN ISO 8044: Corrosion of Metals and Alloys – Basic Terms and Definitions (ISO 8044:1999) Trilingual version EN ISO 8044:1999 DIN EN ISO 8044: Corrosion of Metals and Alloys – Basic Terms and Definitions (ISO 8044:1999) Trilingual version EN ISO 8044:1999
12.3.
go back to reference NBS: Economic Effects of Metallic Corrosion in the United States., National Bureau of Standards, Special Publication, Vol. 511 (NBS, Gaithersburg 1978) NBS: Economic Effects of Metallic Corrosion in the United States., National Bureau of Standards, Special Publication, Vol. 511 (NBS, Gaithersburg 1978)
12.4.
go back to reference W. von Baeckmann, W. Schwenk, W. Prinz (eds): Handbook of Cathodic Protection (Gulf, Houston 1997) W. von Baeckmann, W. Schwenk, W. Prinz (eds): Handbook of Cathodic Protection (Gulf, Houston 1997)
12.5.
go back to reference R. G. Kelly, J. R. Scully, D. W. Shoesmith, R. G. Buchheit: Electrochemical Techniques in Corrosion Science and Engineering (Marcel Dekker, New York 2003) R. G. Kelly, J. R. Scully, D. W. Shoesmith, R. G. Buchheit: Electrochemical Techniques in Corrosion Science and Engineering (Marcel Dekker, New York 2003)
12.6.
go back to reference H. Kaesche: Corrosion of Metals (Springer, Berlin/Heidelberg 2003) H. Kaesche: Corrosion of Metals (Springer, Berlin/Heidelberg 2003)
12.7.
go back to reference M. Schütze (ed): Corrosion and Environmental Degradation, Vol. I, II (Wiley–VCH, Weinheim 2000) M. Schütze (ed): Corrosion and Environmental Degradation, Vol. I, II (Wiley–VCH, Weinheim 2000)
12.8.
go back to reference R. N. Parkins: Corrosion Processes (Applied Science, London 1982) R. N. Parkins: Corrosion Processes (Applied Science, London 1982)
12.9.
go back to reference J. E. Strutt, J. R. Nicholls: Plant Corrosion (Ellis Horwood, Chichester 1987) J. E. Strutt, J. R. Nicholls: Plant Corrosion (Ellis Horwood, Chichester 1987)
12.10.
go back to reference Mattson: Basic Corrosion Technology for Scientists and Engineers (Ellis Horwood, Chichester 1989) Mattson: Basic Corrosion Technology for Scientists and Engineers (Ellis Horwood, Chichester 1989)
12.11.
go back to reference N. Sridhar, G. Cragnolino (eds): Application of Accelerated Corrosion Tests to Service Life Prediction of Materials, Vol. 1194 (ASTM STP, Philadelphia 1994) N. Sridhar, G. Cragnolino (eds): Application of Accelerated Corrosion Tests to Service Life Prediction of Materials, Vol. 1194 (ASTM STP, Philadelphia 1994)
12.12.
go back to reference V. Romanov: Corrosion of Metals (US Department of Commerce, Springfield 1969) V. Romanov: Corrosion of Metals (US Department of Commerce, Springfield 1969)
12.13.
go back to reference P. Dillon: Corrosion Control in the Chemical Process Industry (McGraw–Hill, New York 1986) P. Dillon: Corrosion Control in the Chemical Process Industry (McGraw–Hill, New York 1986)
12.14.
go back to reference D. Donovan: Protection of Metals from Corrosion in Storage and Plants (Ellis Horwood, Chichester 1986) D. Donovan: Protection of Metals from Corrosion in Storage and Plants (Ellis Horwood, Chichester 1986)
12.15.
go back to reference P. Marcus, J. Oudar: Corrosion Mechanisms in Theory and Practice (Marcel Dekker, New York 1995) P. Marcus, J. Oudar: Corrosion Mechanisms in Theory and Practice (Marcel Dekker, New York 1995)
12.16.
go back to reference G. Fontana, N. D. Greene: Corrosion Engineering (McGraw–Hill, New York 1987) G. Fontana, N. D. Greene: Corrosion Engineering (McGraw–Hill, New York 1987)
12.17.
go back to reference C. Scully: The Fundamentals of Corrosion (Butterworth–Heinemann, Oxford 1990) C. Scully: The Fundamentals of Corrosion (Butterworth–Heinemann, Oxford 1990)
12.18.
go back to reference L. Shreir, R. A. Jarman, G. T. Burstein: Corrodion, Vol. 2, 3rd edn. (Butterworth–Heinemann, Oxford 1994) L. Shreir, R. A. Jarman, G. T. Burstein: Corrodion, Vol. 2, 3rd edn. (Butterworth–Heinemann, Oxford 1994)
12.19.
go back to reference P. Dillon (Ed.): Corrosion Handbook, No. 1, The Forms of Corrosion Recognition and Prevention (NACE, Houston 1982) P. Dillon (Ed.): Corrosion Handbook, No. 1, The Forms of Corrosion Recognition and Prevention (NACE, Houston 1982)
12.20.
go back to reference R. C. Weast: Handbook of Chemistry and Physics (CRC, Cleveland 1977) D 141 R. C. Weast: Handbook of Chemistry and Physics (CRC, Cleveland 1977) D 141
12.21.
go back to reference S. Trasatti: J. Electroanal. Chem. 52, 313 (1974) S. Trasatti: J. Electroanal. Chem. 52, 313 (1974)
12.22.
go back to reference R. Gomer, S. Tryson: J. Chem. Phys. 66, 4413 (1977) R. Gomer, S. Tryson: J. Chem. Phys. 66, 4413 (1977)
12.23.
go back to reference R. Gomer, S. Tryson: J. Chem. Phys. 66(D61), 4413 (1977) R. Gomer, S. Tryson: J. Chem. Phys. 66(D61), 4413 (1977)
12.24.
go back to reference I. Barin, O. Knacke: Thermodynamic Poperties of Inorganic Substances (Springer, Berlin 1973) I. Barin, O. Knacke: Thermodynamic Poperties of Inorganic Substances (Springer, Berlin 1973)
12.25.
go back to reference R. Gomer, S. Tryson: J. Chem. Phys. 66(D 111), 4413 (1977) R. Gomer, S. Tryson: J. Chem. Phys. 66(D 111), 4413 (1977)
12.26.
go back to reference M. Pourbaix: Atlas d'Equilibres Electrochimiques (Guthiers Villars&Cie, Paris 1963) M. Pourbaix: Atlas d'Equilibres Electrochimiques (Guthiers Villars&Cie, Paris 1963)
12.27.
go back to reference M. Pourbaix: Atlas of Electrochemical Equilibria in Aqueous Solutions (Pergamon, Oxford 1966) M. Pourbaix: Atlas of Electrochemical Equilibria in Aqueous Solutions (Pergamon, Oxford 1966)
12.28.
go back to reference K. J. Vetter: Electrochemical Kinetics (Academic, Berlin 1961) Fe3O4/Fe2O3 Gleichgew K. J. Vetter: Electrochemical Kinetics (Academic, Berlin 1961) Fe3O4/Fe2O3 Gleichgew
12.29.
go back to reference H.-H. Strehblow: Mechanisms of pitting corrosion. In: Corrosion Mechanisms in Theory and Praxis, ed. by P. Marcus (Marcel Dekker, New York 2002) p. 258 H.-H. Strehblow: Mechanisms of pitting corrosion. In: Corrosion Mechanisms in Theory and Praxis, ed. by P. Marcus (Marcel Dekker, New York 2002) p. 258
12.30.
go back to reference H.-H. Strehblow: Phenomenological and Electrochemical fundamentals of Corrosion. In: Corrosion and Enviroanmental Degradation, ed. by M. Schütze (Wiley–VCH, Weinheim 1999) p. 59 H.-H. Strehblow: Phenomenological and Electrochemical fundamentals of Corrosion. In: Corrosion and Enviroanmental Degradation, ed. by M. Schütze (Wiley–VCH, Weinheim 1999) p. 59
12.31.
go back to reference H.-H. Strehblow: Pitting corrosion. In: Encyclopedia of Electrochemistry, Corrosion and Oxide Films, Vol. 4, ed. by A. J. Bard, M. Stratmann, G. S. Frankel (Wiley–VCH, Weinheim 2003) p. 337 H.-H. Strehblow: Pitting corrosion. In: Encyclopedia of Electrochemistry, Corrosion and Oxide Films, Vol. 4, ed. by A. J. Bard, M. Stratmann, G. S. Frankel (Wiley–VCH, Weinheim 2003) p. 337
12.32.
go back to reference R. Christen, G. Baars: Chemie (Sauerländer, Aarau 1977) p. 778 R. Christen, G. Baars: Chemie (Sauerländer, Aarau 1977) p. 778
12.33.
go back to reference H.-H. Strehblow: Phenomenological and Electrochemical Fundamentals of Corrosion. In: Corrosion and Environmental Degradation, ed. by M. Schütze (VCH, Weinheim 1999) p. 1 H.-H. Strehblow: Phenomenological and Electrochemical Fundamentals of Corrosion. In: Corrosion and Environmental Degradation, ed. by M. Schütze (VCH, Weinheim 1999) p. 1
12.34.
go back to reference E. Heusler: OH Katalyse, Z. Elektrochem. 62, 582 (1958) E. Heusler: OH Katalyse, Z. Elektrochem. 62, 582 (1958)
12.35.
go back to reference J. Vetter: Elektrochemische Kinetik (Springer, Berlin 1961) p. 432 J. Vetter: Elektrochemische Kinetik (Springer, Berlin 1961) p. 432
12.36.
go back to reference H. Kaesche: Die Korrosion der Metalle (Springer, Berlin 1979) H. Kaesche: Die Korrosion der Metalle (Springer, Berlin 1979)
12.37.
go back to reference H. Kaesche: Die Korrosion der Metalle (Springer, Berlin 1990) H. Kaesche: Die Korrosion der Metalle (Springer, Berlin 1990)
12.38.
go back to reference M. Stern: J. Electrochem. Soc. 102, 609 (1955) M. Stern: J. Electrochem. Soc. 102, 609 (1955)
12.39.
go back to reference K. J. Vetter, H.-H. Strehblow: Ber. Bunsen Ges. Physik. Chem. 74, 1024 (1970) K. J. Vetter, H.-H. Strehblow: Ber. Bunsen Ges. Physik. Chem. 74, 1024 (1970)
12.40.
go back to reference J. Newman, D. N. Hansen, K. J. Vetter: Electrochimica Acta 22, 829 (1974) J. Newman, D. N. Hansen, K. J. Vetter: Electrochimica Acta 22, 829 (1974)
12.41.
go back to reference W. G. Levich: Physicochemical Hydrodynamics (Prentice Hall, New York 1962) W. G. Levich: Physicochemical Hydrodynamics (Prentice Hall, New York 1962)
12.42.
go back to reference W. J. Albery, M. L. Hitchman: Ring Disc Electrodes (Clarendon, Oxford 1971) W. J. Albery, M. L. Hitchman: Ring Disc Electrodes (Clarendon, Oxford 1971)
12.43.
go back to reference B. P. Löchel, H.-H. Strehblow: Werkst. Korr. 31, 353 (1980) B. P. Löchel, H.-H. Strehblow: Werkst. Korr. 31, 353 (1980)
12.44.
go back to reference S. Haupt, H.-H. Strehblow: Langmuir 3, 873 (1987) S. Haupt, H.-H. Strehblow: Langmuir 3, 873 (1987)
12.45.
go back to reference G. Engelhardt, T. Jabs, H.-H. Strehblow: J. Electrochem. Soc. 139, 2176 (1992) G. Engelhardt, T. Jabs, H.-H. Strehblow: J. Electrochem. Soc. 139, 2176 (1992)
12.46.
go back to reference R. S. Lillard: Scanning Electrode Techniques fro Investigating near Surface Solution Current Densistiesin Analytical methods. In: Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor and Francis, Boca Raton 2006) p. 571 R. S. Lillard: Scanning Electrode Techniques fro Investigating near Surface Solution Current Densistiesin Analytical methods. In: Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor and Francis, Boca Raton 2006) p. 571
12.47.
go back to reference H. S. Isaacs: J. Electrochem. Soc. 138, 722 (1991) H. S. Isaacs: J. Electrochem. Soc. 138, 722 (1991)
12.48.
go back to reference H. S. Isaacs, B. Vyas: Electrochemical Corrosion Testing, Vol. ASTM STP 727, ed. by F. Mansfeld, U. Bertocci (ASTM, Baltimore 1981) p. 3 H. S. Isaacs, B. Vyas: Electrochemical Corrosion Testing, Vol. ASTM STP 727, ed. by F. Mansfeld, U. Bertocci (ASTM, Baltimore 1981) p. 3
12.49.
go back to reference M. Rohwerder, M. Stratmann, P. Leblanc, G. S. Frankel: Application of scanning kelvin probe in corrosion science. In: Analytical Methods in Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 605 M. Rohwerder, M. Stratmann, P. Leblanc, G. S. Frankel: Application of scanning kelvin probe in corrosion science. In: Analytical Methods in Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 605
12.50.
go back to reference M. Stratmann, K. T. Tim, H. Streckel: Z. Metallkd. 81, 715 (1990) M. Stratmann, K. T. Tim, H. Streckel: Z. Metallkd. 81, 715 (1990)
12.51.
go back to reference F. G. Cottrell: Z. Physik. Chem. 42, 385 (1903) F. G. Cottrell: Z. Physik. Chem. 42, 385 (1903)
12.52.
go back to reference K. J. Vetter: Electrochemical Kinetics (Academic, New York 1967) K. J. Vetter: Electrochemical Kinetics (Academic, New York 1967)
12.53.
go back to reference H. Gerischer, W. Vielstich: Z. Physik. Chem. N.F. 3, 16 (1955) H. Gerischer, W. Vielstich: Z. Physik. Chem. N.F. 3, 16 (1955)
12.54.
go back to reference H.-H. Strehblow, P. Marcus: X-Ray Photoelectron Spectroscopy in corrosion Research. In: Analytical Methods in Corrosion Sience and NENgeneering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 1 H.-H. Strehblow, P. Marcus: X-Ray Photoelectron Spectroscopy in corrosion Research. In: Analytical Methods in Corrosion Sience and NENgeneering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 1
12.55.
go back to reference H.-H. Strehblow: Passivity of metals. In: Advances in Electrochemical Science and Engineering, ed. by R. C. Alkire, D. M. Kolb (Wiley–VCH, Weinheim 2003) p. 272 H.-H. Strehblow: Passivity of metals. In: Advances in Electrochemical Science and Engineering, ed. by R. C. Alkire, D. M. Kolb (Wiley–VCH, Weinheim 2003) p. 272
12.56.
go back to reference J. Castle: Auger electron spectroscopy. In: Analytical Methods in Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 39 J. Castle: Auger electron spectroscopy. In: Analytical Methods in Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 39
12.57.
go back to reference D. Lützenkirchen-Hecht, H.-H. Strehblow: Synchrotron Methods for Corrosion Research. In: Analytical Methods in Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 169 D. Lützenkirchen-Hecht, H.-H. Strehblow: Synchrotron Methods for Corrosion Research. In: Analytical Methods in Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 169
12.58.
go back to reference J. L. Dawson, K. Hladky: The measurement of localized corrosion using electrochemical noise, Corrosion Sci. 21, 317–322 (1981) J. L. Dawson, K. Hladky: The measurement of localized corrosion using electrochemical noise, Corrosion Sci. 21, 317–322 (1981)
12.59.
go back to reference J. L. Dawson, K. Hladky: The measurement of corrosion using 1/f noise, Corrosion Sci. 22, 231–237 (1982) J. L. Dawson, K. Hladky: The measurement of corrosion using 1/f noise, Corrosion Sci. 22, 231–237 (1982)
12.60.
go back to reference J. L. Dawson, J. Uruchurtu: Electrochemical Methods in Corrosion Research, Mater. Sci. Forum 8, 436 (1986) J. L. Dawson, J. Uruchurtu: Electrochemical Methods in Corrosion Research, Mater. Sci. Forum 8, 436 (1986)
12.61.
go back to reference A. Legat: Electrochemical Noise as the basis of corrosion monitoring, 12nd Int. Corrosion Congress 3A, 1410–1419 (1993) A. Legat: Electrochemical Noise as the basis of corrosion monitoring, 12nd Int. Corrosion Congress 3A, 1410–1419 (1993)
12.62.
go back to reference B. Lumsden, M. W. Kendig, S. Jeanjaquet: Electrochemical noise for carbon steel in sodium chloride solutions. – Effect of chloride and oxygen acitivity, Vol. CORROSION/92 (National Association of Corrosion Engineers (NACE), Houston/Tx 1992) Paper 224 B. Lumsden, M. W. Kendig, S. Jeanjaquet: Electrochemical noise for carbon steel in sodium chloride solutions. – Effect of chloride and oxygen acitivity, Vol. CORROSION/92 (National Association of Corrosion Engineers (NACE), Houston/Tx 1992) Paper 224
12.63.
go back to reference N. Rothwell, D. A. Eden: Electrochemical noise techniques for determining corrosion rates and mechanisms, Vol. CORROSION/92 (National Association of Corrosion Engineers (NACE), Houston/Tx 1992) Paper 223 N. Rothwell, D. A. Eden: Electrochemical noise techniques for determining corrosion rates and mechanisms, Vol. CORROSION/92 (National Association of Corrosion Engineers (NACE), Houston/Tx 1992) Paper 223
12.64.
go back to reference A. Cottis, C. A. Loto: Electrochemical noise generation during SCC (stress corrosion cracking) of high strength carbon steel, Corrosion 46, 12–19 (1990) A. Cottis, C. A. Loto: Electrochemical noise generation during SCC (stress corrosion cracking) of high strength carbon steel, Corrosion 46, 12–19 (1990)
12.65.
go back to reference H. Xiao, F. Mansfeld: Development of Electrochemical Test Methods for the Study of Localized Corrosion Phenomena in Biocorrosion (ACS Symposium, Washington D.C. 1992) H. Xiao, F. Mansfeld: Development of Electrochemical Test Methods for the Study of Localized Corrosion Phenomena in Biocorrosion (ACS Symposium, Washington D.C. 1992)
12.66.
go back to reference H. Xiao, F. Mansfeld: Electrochemical noise analysis of iron exposed to NaCl solutions of different corrosivity, J. Electrochem. Soc. 140, 2205–2209 (1993) H. Xiao, F. Mansfeld: Electrochemical noise analysis of iron exposed to NaCl solutions of different corrosivity, J. Electrochem. Soc. 140, 2205–2209 (1993)
12.67.
go back to reference H. Xiao, F. Mansfeld: Electrochemical noise analysis of iron exposed to NaCl solutions of different corrosivity, Vol. 3A (12nd Int. Corrosion Congress, Houston/Tx 1993) pp. 1388–1402 H. Xiao, F. Mansfeld: Electrochemical noise analysis of iron exposed to NaCl solutions of different corrosivity, Vol. 3A (12nd Int. Corrosion Congress, Houston/Tx 1993) pp. 1388–1402
12.68.
go back to reference H. Böhni: Schweiz. Bauzeit. 93, 603 (1975) H. Böhni: Schweiz. Bauzeit. 93, 603 (1975)
12.69.
go back to reference H. Kaesche: Die Korrosion der Metalle, 3rd edn. (Springer Verlag, Berlin 1990) H. Kaesche: Die Korrosion der Metalle, 3rd edn. (Springer Verlag, Berlin 1990)
12.70.
go back to reference DIN 50922: Ausgabe Oktober 1985, Korrosion der Metalle, Untersuchung der Beständigkeit von metallischen Wekstoffen gegen Spannungsrisskorrosion DIN 50922: Ausgabe Oktober 1985, Korrosion der Metalle, Untersuchung der Beständigkeit von metallischen Wekstoffen gegen Spannungsrisskorrosion
12.71.
go back to reference DIN EN ISO 7539: Teil 1 bis 7, Ausgabe August 1995, Korrosion der Metalle und Legierungen, Prüfung der Spannungsrisskorrosion DIN EN ISO 7539: Teil 1 bis 7, Ausgabe August 1995, Korrosion der Metalle und Legierungen, Prüfung der Spannungsrisskorrosion
12.72.
go back to reference N. Parkins, F. Mazza, J. J. Royuela, J. C. Scully: Brit. Corros. J. 7, 154 (1972) N. Parkins, F. Mazza, J. J. Royuela, J. C. Scully: Brit. Corros. J. 7, 154 (1972)
12.73.
go back to reference B. Stellwag, H. Kaesche: Werkst. Korros. 33, 274, 323 (1982) B. Stellwag, H. Kaesche: Werkst. Korros. 33, 274, 323 (1982)
12.74.
go back to reference H. Kaesche: Bruchvorgänge (Vorträge der 20. Sitzung des DVM-Arbeitskreises, Frankfurt am Main 1988) p. 9/45 H. Kaesche: Bruchvorgänge (Vorträge der 20. Sitzung des DVM-Arbeitskreises, Frankfurt am Main 1988) p. 9/45
12.75.
go back to reference H. Böhni: Werkst. Korros. 26, 199 (1975) H. Böhni: Werkst. Korros. 26, 199 (1975)
12.76.
go back to reference F. Kuster, K. Bohnenkamp, H.-J. Engell: Werkst. Korros. 29, 792 (1978) F. Kuster, K. Bohnenkamp, H.-J. Engell: Werkst. Korros. 29, 792 (1978)
12.77.
go back to reference R. Grauer, B. Knecht, P. Kreis, J. R. Simpson: Werkst. Korros. 42, 637 (1991) R. Grauer, B. Knecht, P. Kreis, J. R. Simpson: Werkst. Korros. 42, 637 (1991)
12.78.
go back to reference F. Stoll: Spannungsrisskorrosion von Spannstählen Ph.D. Thesis (Universität Erlangen–Nürnberg, Erlangen 1982) F. Stoll: Spannungsrisskorrosion von Spannstählen Ph.D. Thesis (Universität Erlangen–Nürnberg, Erlangen 1982)
12.79.
go back to reference E. Wendler-Kalsch: Grundlagen und Mechanismen der H-induzierten Korrosion metallischer Werkstoffe. In: Wasserstoff und Korrosion, ed. by D. Kuron (Verlag I. Kuron, Bonn 1986) E. Wendler-Kalsch: Grundlagen und Mechanismen der H-induzierten Korrosion metallischer Werkstoffe. In: Wasserstoff und Korrosion, ed. by D. Kuron (Verlag I. Kuron, Bonn 1986)
12.80.
go back to reference C. A. Zapffe, C. E. Sims: Trans. AIME 145, 225 (1941) C. A. Zapffe, C. E. Sims: Trans. AIME 145, 225 (1941)
12.81.
go back to reference N. J. Petch, P. Stables: Nature 169, 842 (1952) N. J. Petch, P. Stables: Nature 169, 842 (1952)
12.82.
go back to reference J. K. Tien, A. W. Thompson, J. M. Bernstein, R. J. Richards: Metall. Trans. A 7A, 821 (1976) J. K. Tien, A. W. Thompson, J. M. Bernstein, R. J. Richards: Metall. Trans. A 7A, 821 (1976)
12.83.
12.84.
go back to reference R. A. Oriani: Ber. de Bunsenges. 76, 848 (1972) R. A. Oriani: Ber. de Bunsenges. 76, 848 (1972)
12.85.
go back to reference U. Nürnberger: Korrosion und Korrosionsschutz im Bauwesen, Vol. 1 (Bauverlag, Weisbaden, Berlin 1995) U. Nürnberger: Korrosion und Korrosionsschutz im Bauwesen, Vol. 1 (Bauverlag, Weisbaden, Berlin 1995)
12.86.
go back to reference E. Riecke: Arch. Eisenhüttenwes. 49, 509 (1978) E. Riecke: Arch. Eisenhüttenwes. 49, 509 (1978)
12.87.
go back to reference E. Riecke: Arch. Eisenhüttenwes. 44, 647 (1973) E. Riecke: Arch. Eisenhüttenwes. 44, 647 (1973)
12.88.
go back to reference J. R. Davies (ed.): Heat-Resistant Materials (ASM International, Materials Park (Ohio) 1997) pp. 31–66 J. R. Davies (ed.): Heat-Resistant Materials (ASM International, Materials Park (Ohio) 1997) pp. 31–66
12.89.
go back to reference ASTM G54-84: Standard Practice for Simple Static Oxidation Testing (ASTM International, Philadelphia 1996) (Withdrawn 2002) ASTM G54-84: Standard Practice for Simple Static Oxidation Testing (ASTM International, Philadelphia 1996) (Withdrawn 2002)
12.90.
go back to reference ASTM B76-90: Standard Test Method for Accelerated Life of Nickel–Chromium and Nickel–Chromium–Iron Alloys for Electrical Heating (ASTM International, Philadelphia 2001) ASTM B76-90: Standard Test Method for Accelerated Life of Nickel–Chromium and Nickel–Chromium–Iron Alloys for Electrical Heating (ASTM International, Philadelphia 2001)
12.91.
go back to reference ASTM B78-90: Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating (ASTM International, Philadelphia 2001) ASTM B78-90: Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating (ASTM International, Philadelphia 2001)
12.92.
go back to reference ASTM G79-83: Standard Practice for Evaluation of Metals Exposed to Carburization Environments (e1, ASTM International, Philadelphia 1996) ASTM G79-83: Standard Practice for Evaluation of Metals Exposed to Carburization Environments (e1, ASTM International, Philadelphia 1996)
12.93.
go back to reference A. B. Tomkings, J. R. Nicholls, D. G. Robertson: EC Report, EUR 19479 EN, Discontinuous Corrosion Testing in High Temperature Gaseous Atmospheres (TESTCORR, London 2001) A. B. Tomkings, J. R. Nicholls, D. G. Robertson: EC Report, EUR 19479 EN, Discontinuous Corrosion Testing in High Temperature Gaseous Atmospheres (TESTCORR, London 2001)
12.94.
go back to reference JIS Z 2281: Test method for continuous oxidation test at elevated temperatures for metallic materials (Japanese Standards Association, Tokio 1993) JIS Z 2281: Test method for continuous oxidation test at elevated temperatures for metallic materials (Japanese Standards Association, Tokio 1993)
12.95.
go back to reference JIS Z282: Method of cyclic oxidation testing at elevated temperatures for metallic materials (Japanese Standards Association, Tokio 1996) JIS Z282: Method of cyclic oxidation testing at elevated temperatures for metallic materials (Japanese Standards Association, Tokio 1996)
12.96.
go back to reference H. J. Grabke, D. B. Meadowcroft (eds): Guidelines for Methods of testing and Research in High Temperature Corrosion (European Federation of Corrosion Publications, The Institute of Materials, London 1995) p. 14 H. J. Grabke, D. B. Meadowcroft (eds): Guidelines for Methods of testing and Research in High Temperature Corrosion (European Federation of Corrosion Publications, The Institute of Materials, London 1995) p. 14
12.97.
go back to reference M. Schütze, W. J. Quadakkers (eds): Cyclic Oxidation of High Temperature Materials – Mechanisms, Testing Methods, Characterisation and Life Time Estimation (European Federation of Corrosion Publications, The Institute of Materials, London 1999) p. 27 M. Schütze, W. J. Quadakkers (eds): Cyclic Oxidation of High Temperature Materials – Mechanisms, Testing Methods, Characterisation and Life Time Estimation (European Federation of Corrosion Publications, The Institute of Materials, London 1999) p. 27
12.98.
go back to reference M. Malessa, M. Schütze: COTEST – Cyclic Oxidation Testing – Development of a Code of Practice for the Characterisation of High Temperature Materials Performance (EC Final Report, Brussels 2005) M. Malessa, M. Schütze: COTEST – Cyclic Oxidation Testing – Development of a Code of Practice for the Characterisation of High Temperature Materials Performance (EC Final Report, Brussels 2005)
12.99.
go back to reference H. Echsler: Oxidationsverhalten und mechanische Eigenschaften von Wärmedämmschichten und deren Einfluss auf eine Lebensdauervorhersage, Dissertation (RWTH, Aachen 2002) H. Echsler: Oxidationsverhalten und mechanische Eigenschaften von Wärmedämmschichten und deren Einfluss auf eine Lebensdauervorhersage, Dissertation (RWTH, Aachen 2002)
12.100.
go back to reference A. Rahmel, W. Schwenk: Korrosion und Korrosionsschutz von Stählen (Verlag Chemie, Weinheim 1977) A. Rahmel, W. Schwenk: Korrosion und Korrosionsschutz von Stählen (Verlag Chemie, Weinheim 1977)
12.101.
go back to reference H. Hindam, D. P. Whittle: Oxid. Met. 83, 245 (1982) H. Hindam, D. P. Whittle: Oxid. Met. 83, 245 (1982)
12.102.
go back to reference M. J. McNallan, W. W. Liang, S. H. Kim, C. T. Kang: Acceleration of the high temperature oxidation of metals by chlorine. In: High Temperature Corrosion, ed. by R. A. Rapp (NACE, Houston 1983) pp. 316–321 M. J. McNallan, W. W. Liang, S. H. Kim, C. T. Kang: Acceleration of the high temperature oxidation of metals by chlorine. In: High Temperature Corrosion, ed. by R. A. Rapp (NACE, Houston 1983) pp. 316–321
12.103.
go back to reference ASTM E633-00: Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800 °F (1000 °C) in Air (ASTM International, Philadelphia 2000) ASTM E633-00: Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800 °F (1000 °C) in Air (ASTM International, Philadelphia 2000)
12.104.
go back to reference ASTM E220-02: Standard Test Method for Calibration of Thermocouples by Comparison Techniques (ASTM International, Philadelphia 2002) ASTM E220-02: Standard Test Method for Calibration of Thermocouples by Comparison Techniques (ASTM International, Philadelphia 2002)
12.105.
go back to reference ASTM E230-03: Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples (ASTM International, Philadelphia 2003) ASTM E230-03: Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples (ASTM International, Philadelphia 2003)
12.106.
go back to reference ASTM E1350-97: Standard Test Methods for Testing Sheathed Thermocouples Prior to, During, and After Installation (ASTM International, Philadelphia 2001) ASTM E1350-97: Standard Test Methods for Testing Sheathed Thermocouples Prior to, During, and After Installation (ASTM International, Philadelphia 2001)
12.107.
go back to reference FEPA 42-GB-1984 R: FEPA-Standard for bonded abrasive grains of fused aluminium oxide and silicon carbide (Federation of European Producers of Abrasives, Paris 1993) FEPA 42-GB-1984 R: FEPA-Standard for bonded abrasive grains of fused aluminium oxide and silicon carbide (Federation of European Producers of Abrasives, Paris 1993)
12.108.
go back to reference ISO 6344: Coated abrasives – Grain size analysis (International Organisation for Standardization, Geneva 1998) ISO 6344: Coated abrasives – Grain size analysis (International Organisation for Standardization, Geneva 1998)
12.109.
go back to reference M. Schütze: Protective Oxide Scales and Their Breakdown (Wiley, West Sussex 1997) M. Schütze: Protective Oxide Scales and Their Breakdown (Wiley, West Sussex 1997)
12.110.
go back to reference G. Strehl: Materials at High Temperatures, submitted (The Effect of Heating on the total Oxidation Time), Science Reviews, St. Albans, UK G. Strehl: Materials at High Temperatures, submitted (The Effect of Heating on the total Oxidation Time), Science Reviews, St. Albans, UK
12.111.
go back to reference M. Malessa, M. Schütze: Development of guidelines for Cyclic Oxidation Testing of High Temperature Materials (EUROCORR, Budapest 2003) M. Malessa, M. Schütze: Development of guidelines for Cyclic Oxidation Testing of High Temperature Materials (EUROCORR, Budapest 2003)
12.113.
go back to reference M. Welker, A. Rahmel, M. Schütze: Investigations on the influence of internal nitridation on creep crack growth in alloy 800 H, Metall. Trans. A 20, 1553 (1989) M. Welker, A. Rahmel, M. Schütze: Investigations on the influence of internal nitridation on creep crack growth in alloy 800 H, Metall. Trans. A 20, 1553 (1989)
12.114.
go back to reference V. Guttmann, M. Schütze: Interaction of corrosion and mechanical properties. In: High Temperature Alloys for Gas Turbines and Other Applications, ed. by W. Betz, et al. (Reidel, Dordrecht 1986) p. 293 V. Guttmann, M. Schütze: Interaction of corrosion and mechanical properties. In: High Temperature Alloys for Gas Turbines and Other Applications, ed. by W. Betz, et al. (Reidel, Dordrecht 1986) p. 293
12.115.
go back to reference V. Guttmann, M. Merz: Corrosion and Mechanical Stress at High Temperatures (Applied Science, London 1981) V. Guttmann, M. Merz: Corrosion and Mechanical Stress at High Temperatures (Applied Science, London 1981)
12.116.
go back to reference S. R. J. Saunders, H. E. Evans, J. A. Stringer (eds): Materials at High Temperatures, Vol. 12 (Special Issue Mechanical Properties of Protective Oxide Scales, Springer, Netherland 1994) pp. 83–256 also: 1995, 13, 75–80; 195, 13, 181–195 S. R. J. Saunders, H. E. Evans, J. A. Stringer (eds): Materials at High Temperatures, Vol. 12 (Special Issue Mechanical Properties of Protective Oxide Scales, Springer, Netherland 1994) pp. 83–256 also: 1995, 13, 75–80; 195, 13, 181–195
12.118.
go back to reference M. Schütze: Deformation and cracking behaviour of protective oxide scales on heat-resistant steels under tensile strain, Oxid. Met. 24, 199 (1985) M. Schütze: Deformation and cracking behaviour of protective oxide scales on heat-resistant steels under tensile strain, Oxid. Met. 24, 199 (1985)
12.119.
go back to reference S. R. Holdsworth, W. Hoffelner: Fracture mechanics and crack growth in fatigue. In: High Temperature Alloys for Gas Turbines, ed. by R. Brunetaud, D. Coutsouradis, T. B. Gibbons, Y. Lindblom, D. B. Meadowcroft, R. Stickler (Springer, Netherland 1982) p. 345 S. R. Holdsworth, W. Hoffelner: Fracture mechanics and crack growth in fatigue. In: High Temperature Alloys for Gas Turbines, ed. by R. Brunetaud, D. Coutsouradis, T. B. Gibbons, Y. Lindblom, D. B. Meadowcroft, R. Stickler (Springer, Netherland 1982) p. 345
12.120.
go back to reference M. Schütze, B. Glaser: The influence of Cl-containing atmospheres on creep crack growth at 800 °C. In: Heat-Resistant Materials II, ed. by K. Natesan, et al. (ASM International, Materials Park (Ohio) 1995) pp. 343–351 M. Schütze, B. Glaser: The influence of Cl-containing atmospheres on creep crack growth at 800 °C. In: Heat-Resistant Materials II, ed. by K. Natesan, et al. (ASM International, Materials Park (Ohio) 1995) pp. 343–351
12.121.
go back to reference M. Schütze: Anrißentstehung und Anrißwachstum unter korrosiven Bedingungen bei hohen Temperaturen. In: Korrosion und Bruch (DVM, Berlin 1988) p. 279 M. Schütze: Anrißentstehung und Anrißwachstum unter korrosiven Bedingungen bei hohen Temperaturen. In: Korrosion und Bruch (DVM, Berlin 1988) p. 279
12.122.
go back to reference K.-H. Döhle, A. Rahmel, M. Schmidt, M. Schütze: Two different test rigs for creep experiments in aggressive environments. In: Corrosion and Mechanical Stress at High Temperatures, ed. by V. Guttmann, M. Merz (Applied Science, London 1981) p. 441 K.-H. Döhle, A. Rahmel, M. Schmidt, M. Schütze: Two different test rigs for creep experiments in aggressive environments. In: Corrosion and Mechanical Stress at High Temperatures, ed. by V. Guttmann, M. Merz (Applied Science, London 1981) p. 441
Metadata
Title
Corrosion
Authors
Bernd Isecke, Dr.
Michael Schütze, Prof.
Hans-Henning Strehblow, Dr.
Copyright Year
2006
DOI
https://doi.org/10.1007/978-3-540-30300-8_12

Premium Partners