nach oben

Erschienen in:

2006 | OriginalPaper | Buchkapitel

12. Corrosion

verfasst von : Bernd Isecke, Dr., Michael Schütze, Prof., Hans-Henning Strehblow, Dr.

Erschienen in: Springer Handbook of Materials Measurement Methods

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Corrosion is defined as the interaction between a metal and its environment that results in changes in the properties of the metal, and which may lead to significant impairment of the function of the metal. In most cases the interaction between the metal and the environment is an electrochemical reaction where thermodynamic and kinetic considerations apply. Depending on the characteristics of the corrosion system various types of corrosion occur.

In this chapter all test methods available today are described. For scientific purposes as well as investigations in the laboratory so called conventional electrochemical test methods with direct current are primarily used (Sect. 12.1). In addition, newer techniques have been proposed (Sect. 12.1) that are based on dynamic system analysis (Sect. 12.2.1) or that allow study of corrosion processes in situ with spatial resolution down to 20 μm (Sects. 12.2.2 and 12.2.3). In the following sections a distinction has been made between testing for performance of corrosion protection measures such as inhibitors (Sect. 12.8) and testing that focuses on specific types of corrosion. In this context it is advisable to differentiate between corrosion without (Sect. 12.4) and with mechanical loading (Sect. 12.5) including hydrogen-assisted cracking (Sect. 12.6) which has some similarities to stress corrosion. High-temperature oxidation (Sect. 12.6) has a different mechanistic background than electrolytic corrosion because it is an oxidation process at a metal/gas or metal/salt solution interface. Exposure and on-site testing (monitoring) require specific considerations in the design of test facilities, probes and the interpretation of results (Sect. 12.4).

Appendix Part D provides a list of standards related to the various sections of this chapter. Another important source of information regarding corrosion testing is that edited by Baboian [12.1].

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Optical Properties

Nächstes Kapitel Friction and Wear

12.1.

R. Baboian: Corrosion Tests and Standards (ASTM, Philadelphia 1995)

12.2.

DIN EN ISO 8044: Corrosion of Metals and Alloys – Basic Terms and Definitions (ISO 8044:1999) Trilingual version EN ISO 8044:1999

12.3.

NBS: Economic Effects of Metallic Corrosion in the United States., National Bureau of Standards, Special Publication, Vol. 511 (NBS, Gaithersburg 1978)

12.4.

W. von Baeckmann, W. Schwenk, W. Prinz (eds): Handbook of Cathodic Protection (Gulf, Houston 1997)

12.5.

R. G. Kelly, J. R. Scully, D. W. Shoesmith, R. G. Buchheit: Electrochemical Techniques in Corrosion Science and Engineering (Marcel Dekker, New York 2003)

12.6.

H. Kaesche: Corrosion of Metals (Springer, Berlin/Heidelberg 2003)

12.7.

M. Schütze (ed): Corrosion and Environmental Degradation, Vol. I, II (Wiley–VCH, Weinheim 2000)

12.8.

R. N. Parkins: Corrosion Processes (Applied Science, London 1982)

12.9.

J. E. Strutt, J. R. Nicholls: Plant Corrosion (Ellis Horwood, Chichester 1987)

12.10.

Mattson: Basic Corrosion Technology for Scientists and Engineers (Ellis Horwood, Chichester 1989)

12.11.

N. Sridhar, G. Cragnolino (eds): Application of Accelerated Corrosion Tests to Service Life Prediction of Materials, Vol. 1194 (ASTM STP, Philadelphia 1994)

12.12.

V. Romanov: Corrosion of Metals (US Department of Commerce, Springfield 1969)

12.13.

P. Dillon: Corrosion Control in the Chemical Process Industry (McGraw–Hill, New York 1986)

12.14.

D. Donovan: Protection of Metals from Corrosion in Storage and Plants (Ellis Horwood, Chichester 1986)

12.15.

P. Marcus, J. Oudar: Corrosion Mechanisms in Theory and Practice (Marcel Dekker, New York 1995)

12.16.

G. Fontana, N. D. Greene: Corrosion Engineering (McGraw–Hill, New York 1987)

12.17.

C. Scully: The Fundamentals of Corrosion (Butterworth–Heinemann, Oxford 1990)

12.18.

L. Shreir, R. A. Jarman, G. T. Burstein: Corrodion, Vol. 2, 3rd edn. (Butterworth–Heinemann, Oxford 1994)

12.19.

P. Dillon (Ed.): Corrosion Handbook, No. 1, The Forms of Corrosion Recognition and Prevention (NACE, Houston 1982)

12.20.

R. C. Weast: Handbook of Chemistry and Physics (CRC, Cleveland 1977) D 141

12.21.

S. Trasatti: J. Electroanal. Chem. 52, 313 (1974)

12.22.

R. Gomer, S. Tryson: J. Chem. Phys. 66, 4413 (1977)

12.23.

R. Gomer, S. Tryson: J. Chem. Phys. 66(D61), 4413 (1977)

12.24.

I. Barin, O. Knacke: Thermodynamic Poperties of Inorganic Substances (Springer, Berlin 1973)

12.25.

R. Gomer, S. Tryson: J. Chem. Phys. 66(D 111), 4413 (1977)

12.26.

M. Pourbaix: Atlas d'Equilibres Electrochimiques (Guthiers Villars&Cie, Paris 1963)

12.27.

M. Pourbaix: Atlas of Electrochemical Equilibria in Aqueous Solutions (Pergamon, Oxford 1966)

12.28.

K. J. Vetter: Electrochemical Kinetics (Academic, Berlin 1961) Fe₃O₄/Fe₂O₃ Gleichgew

12.29.

H.-H. Strehblow: Mechanisms of pitting corrosion. In: Corrosion Mechanisms in Theory and Praxis, ed. by P. Marcus (Marcel Dekker, New York 2002) p. 258

12.30.

H.-H. Strehblow: Phenomenological and Electrochemical fundamentals of Corrosion. In: Corrosion and Enviroanmental Degradation, ed. by M. Schütze (Wiley–VCH, Weinheim 1999) p. 59

12.31.

H.-H. Strehblow: Pitting corrosion. In: Encyclopedia of Electrochemistry, Corrosion and Oxide Films, Vol. 4, ed. by A. J. Bard, M. Stratmann, G. S. Frankel (Wiley–VCH, Weinheim 2003) p. 337

12.32.

R. Christen, G. Baars: Chemie (Sauerländer, Aarau 1977) p. 778

12.33.

H.-H. Strehblow: Phenomenological and Electrochemical Fundamentals of Corrosion. In: Corrosion and Environmental Degradation, ed. by M. Schütze (VCH, Weinheim 1999) p. 1

12.34.

E. Heusler: OH Katalyse, Z. Elektrochem. 62, 582 (1958)

12.35.

J. Vetter: Elektrochemische Kinetik (Springer, Berlin 1961) p. 432

12.36.

H. Kaesche: Die Korrosion der Metalle (Springer, Berlin 1979)

12.37.

H. Kaesche: Die Korrosion der Metalle (Springer, Berlin 1990)

12.38.

M. Stern: J. Electrochem. Soc. 102, 609 (1955)

12.39.

K. J. Vetter, H.-H. Strehblow: Ber. Bunsen Ges. Physik. Chem. 74, 1024 (1970)

12.40.

J. Newman, D. N. Hansen, K. J. Vetter: Electrochimica Acta 22, 829 (1974)

12.41.

W. G. Levich: Physicochemical Hydrodynamics (Prentice Hall, New York 1962)

12.42.

W. J. Albery, M. L. Hitchman: Ring Disc Electrodes (Clarendon, Oxford 1971)

12.43.

B. P. Löchel, H.-H. Strehblow: Werkst. Korr. 31, 353 (1980)

12.44.

S. Haupt, H.-H. Strehblow: Langmuir 3, 873 (1987)

12.45.

G. Engelhardt, T. Jabs, H.-H. Strehblow: J. Electrochem. Soc. 139, 2176 (1992)

12.46.

R. S. Lillard: Scanning Electrode Techniques fro Investigating near Surface Solution Current Densistiesin Analytical methods. In: Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor and Francis, Boca Raton 2006) p. 571

12.47.

H. S. Isaacs: J. Electrochem. Soc. 138, 722 (1991)

12.48.

H. S. Isaacs, B. Vyas: Electrochemical Corrosion Testing, Vol. ASTM STP 727, ed. by F. Mansfeld, U. Bertocci (ASTM, Baltimore 1981) p. 3

12.49.

M. Rohwerder, M. Stratmann, P. Leblanc, G. S. Frankel: Application of scanning kelvin probe in corrosion science. In: Analytical Methods in Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 605

12.50.

M. Stratmann, K. T. Tim, H. Streckel: Z. Metallkd. 81, 715 (1990)

12.51.

F. G. Cottrell: Z. Physik. Chem. 42, 385 (1903)

12.52.

K. J. Vetter: Electrochemical Kinetics (Academic, New York 1967)

12.53.

H. Gerischer, W. Vielstich: Z. Physik. Chem. N.F. 3, 16 (1955)

12.54.

H.-H. Strehblow, P. Marcus: X-Ray Photoelectron Spectroscopy in corrosion Research. In: Analytical Methods in Corrosion Sience and NENgeneering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 1

12.55.

H.-H. Strehblow: Passivity of metals. In: Advances in Electrochemical Science and Engineering, ed. by R. C. Alkire, D. M. Kolb (Wiley–VCH, Weinheim 2003) p. 272

12.56.

J. Castle: Auger electron spectroscopy. In: Analytical Methods in Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 39

12.57.

D. Lützenkirchen-Hecht, H.-H. Strehblow: Synchrotron Methods for Corrosion Research. In: Analytical Methods in Corrosion Science and Engineering, ed. by P. Marcus, F. Mansfeld (CRC Taylor Francis, Boca Raton 2006) p. 169

12.58.

J. L. Dawson, K. Hladky: The measurement of localized corrosion using electrochemical noise, Corrosion Sci. 21, 317–322 (1981)

12.59.

J. L. Dawson, K. Hladky: The measurement of corrosion using 1/f noise, Corrosion Sci. 22, 231–237 (1982)

12.60.

J. L. Dawson, J. Uruchurtu: Electrochemical Methods in Corrosion Research, Mater. Sci. Forum 8, 436 (1986)

12.61.

A. Legat: Electrochemical Noise as the basis of corrosion monitoring, 12nd Int. Corrosion Congress 3A, 1410–1419 (1993)

12.62.

B. Lumsden, M. W. Kendig, S. Jeanjaquet: Electrochemical noise for carbon steel in sodium chloride solutions. – Effect of chloride and oxygen acitivity, Vol. CORROSION/92 (National Association of Corrosion Engineers (NACE), Houston/Tx 1992) Paper 224

12.63.

N. Rothwell, D. A. Eden: Electrochemical noise techniques for determining corrosion rates and mechanisms, Vol. CORROSION/92 (National Association of Corrosion Engineers (NACE), Houston/Tx 1992) Paper 223

12.64.

A. Cottis, C. A. Loto: Electrochemical noise generation during SCC (stress corrosion cracking) of high strength carbon steel, Corrosion 46, 12–19 (1990)

12.65.

H. Xiao, F. Mansfeld: Development of Electrochemical Test Methods for the Study of Localized Corrosion Phenomena in Biocorrosion (ACS Symposium, Washington D.C. 1992)

12.66.

H. Xiao, F. Mansfeld: Electrochemical noise analysis of iron exposed to NaCl solutions of different corrosivity, J. Electrochem. Soc. 140, 2205–2209 (1993)

12.67.

H. Xiao, F. Mansfeld: Electrochemical noise analysis of iron exposed to NaCl solutions of different corrosivity, Vol. 3A (12nd Int. Corrosion Congress, Houston/Tx 1993) pp. 1388–1402

12.68.

H. Böhni: Schweiz. Bauzeit. 93, 603 (1975)

12.69.

H. Kaesche: Die Korrosion der Metalle, 3rd edn. (Springer Verlag, Berlin 1990)

12.70.

DIN 50922: Ausgabe Oktober 1985, Korrosion der Metalle, Untersuchung der Beständigkeit von metallischen Wekstoffen gegen Spannungsrisskorrosion

12.71.

DIN EN ISO 7539: Teil 1 bis 7, Ausgabe August 1995, Korrosion der Metalle und Legierungen, Prüfung der Spannungsrisskorrosion

12.72.

N. Parkins, F. Mazza, J. J. Royuela, J. C. Scully: Brit. Corros. J. 7, 154 (1972)

12.73.

B. Stellwag, H. Kaesche: Werkst. Korros. 33, 274, 323 (1982)

12.74.

H. Kaesche: Bruchvorgänge (Vorträge der 20. Sitzung des DVM-Arbeitskreises, Frankfurt am Main 1988) p. 9/45

12.75.

H. Böhni: Werkst. Korros. 26, 199 (1975)

12.76.

F. Kuster, K. Bohnenkamp, H.-J. Engell: Werkst. Korros. 29, 792 (1978)

12.77.

R. Grauer, B. Knecht, P. Kreis, J. R. Simpson: Werkst. Korros. 42, 637 (1991)

12.78.

F. Stoll: Spannungsrisskorrosion von Spannstählen Ph.D. Thesis (Universität Erlangen–Nürnberg, Erlangen 1982)

12.79.

E. Wendler-Kalsch: Grundlagen und Mechanismen der H-induzierten Korrosion metallischer Werkstoffe. In: Wasserstoff und Korrosion, ed. by D. Kuron (Verlag I. Kuron, Bonn 1986)

12.80.

C. A. Zapffe, C. E. Sims: Trans. AIME 145, 225 (1941)

12.81.

N. J. Petch, P. Stables: Nature 169, 842 (1952)

12.82.

J. K. Tien, A. W. Thompson, J. M. Bernstein, R. J. Richards: Metall. Trans. A 7A, 821 (1976)

12.83.

R. Troiano: Trans. ASM 52, 54 (1960)

12.84.

R. A. Oriani: Ber. de Bunsenges. 76, 848 (1972)

12.85.

U. Nürnberger: Korrosion und Korrosionsschutz im Bauwesen, Vol. 1 (Bauverlag, Weisbaden, Berlin 1995)

12.86.

E. Riecke: Arch. Eisenhüttenwes. 49, 509 (1978)

12.87.

E. Riecke: Arch. Eisenhüttenwes. 44, 647 (1973)

12.88.

J. R. Davies (ed.): Heat-Resistant Materials (ASM International, Materials Park (Ohio) 1997) pp. 31–66

12.89.

ASTM G54-84: Standard Practice for Simple Static Oxidation Testing (ASTM International, Philadelphia 1996) (Withdrawn 2002)

12.90.

ASTM B76-90: Standard Test Method for Accelerated Life of Nickel–Chromium and Nickel–Chromium–Iron Alloys for Electrical Heating (ASTM International, Philadelphia 2001)

12.91.

ASTM B78-90: Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating (ASTM International, Philadelphia 2001)

12.92.

ASTM G79-83: Standard Practice for Evaluation of Metals Exposed to Carburization Environments (e1, ASTM International, Philadelphia 1996)

12.93.

A. B. Tomkings, J. R. Nicholls, D. G. Robertson: EC Report, EUR 19479 EN, Discontinuous Corrosion Testing in High Temperature Gaseous Atmospheres (TESTCORR, London 2001)

12.94.

JIS Z 2281: Test method for continuous oxidation test at elevated temperatures for metallic materials (Japanese Standards Association, Tokio 1993)

12.95.

JIS Z282: Method of cyclic oxidation testing at elevated temperatures for metallic materials (Japanese Standards Association, Tokio 1996)

12.96.

H. J. Grabke, D. B. Meadowcroft (eds): Guidelines for Methods of testing and Research in High Temperature Corrosion (European Federation of Corrosion Publications, The Institute of Materials, London 1995) p. 14

12.97.

M. Schütze, W. J. Quadakkers (eds): Cyclic Oxidation of High Temperature Materials – Mechanisms, Testing Methods, Characterisation and Life Time Estimation (European Federation of Corrosion Publications, The Institute of Materials, London 1999) p. 27

12.98.

M. Malessa, M. Schütze: COTEST – Cyclic Oxidation Testing – Development of a Code of Practice for the Characterisation of High Temperature Materials Performance (EC Final Report, Brussels 2005)

12.99.

H. Echsler: Oxidationsverhalten und mechanische Eigenschaften von Wärmedämmschichten und deren Einfluss auf eine Lebensdauervorhersage, Dissertation (RWTH, Aachen 2002)

12.100.

A. Rahmel, W. Schwenk: Korrosion und Korrosionsschutz von Stählen (Verlag Chemie, Weinheim 1977)

12.101.

H. Hindam, D. P. Whittle: Oxid. Met. 83, 245 (1982)

12.102.

M. J. McNallan, W. W. Liang, S. H. Kim, C. T. Kang: Acceleration of the high temperature oxidation of metals by chlorine. In: High Temperature Corrosion, ed. by R. A. Rapp (NACE, Houston 1983) pp. 316–321

12.103.

ASTM E633-00: Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800 °F (1000 °C) in Air (ASTM International, Philadelphia 2000)

12.104.

ASTM E220-02: Standard Test Method for Calibration of Thermocouples by Comparison Techniques (ASTM International, Philadelphia 2002)

12.105.

ASTM E230-03: Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples (ASTM International, Philadelphia 2003)

12.106.

ASTM E1350-97: Standard Test Methods for Testing Sheathed Thermocouples Prior to, During, and After Installation (ASTM International, Philadelphia 2001)

12.107.

FEPA 42-GB-1984 R: FEPA-Standard for bonded abrasive grains of fused aluminium oxide and silicon carbide (Federation of European Producers of Abrasives, Paris 1993)

12.108.

ISO 6344: Coated abrasives – Grain size analysis (International Organisation for Standardization, Geneva 1998)

12.109.

M. Schütze: Protective Oxide Scales and Their Breakdown (Wiley, West Sussex 1997)

12.110.

G. Strehl: Materials at High Temperatures, submitted (The Effect of Heating on the total Oxidation Time), Science Reviews, St. Albans, UK

12.111.

M. Malessa, M. Schütze: Development of guidelines for Cyclic Oxidation Testing of High Temperature Materials (EUROCORR, Budapest 2003)

12.112.

M. Malessa, M. Schütze: Test method for Thermal Cycling Oxidation Testing, http://cotest.dechema.de

12.113.

M. Welker, A. Rahmel, M. Schütze: Investigations on the influence of internal nitridation on creep crack growth in alloy 800 H, Metall. Trans. A 20, 1553 (1989)

12.114.

V. Guttmann, M. Schütze: Interaction of corrosion and mechanical properties. In: High Temperature Alloys for Gas Turbines and Other Applications, ed. by W. Betz, et al. (Reidel, Dordrecht 1986) p. 293

12.115.

V. Guttmann, M. Merz: Corrosion and Mechanical Stress at High Temperatures (Applied Science, London 1981)

12.116.

S. R. J. Saunders, H. E. Evans, J. A. Stringer (eds): Materials at High Temperatures, Vol. 12 (Special Issue Mechanical Properties of Protective Oxide Scales, Springer, Netherland 1994) pp. 83–256 also: 1995, 13, 75–80; 195, 13, 181–195

12.117.

V. Guttmann: Environmental Creep Testing, http://ie.jrc.cec.eu.int/facilities.html

12.118.

M. Schütze: Deformation and cracking behaviour of protective oxide scales on heat-resistant steels under tensile strain, Oxid. Met. 24, 199 (1985)

12.119.

S. R. Holdsworth, W. Hoffelner: Fracture mechanics and crack growth in fatigue. In: High Temperature Alloys for Gas Turbines, ed. by R. Brunetaud, D. Coutsouradis, T. B. Gibbons, Y. Lindblom, D. B. Meadowcroft, R. Stickler (Springer, Netherland 1982) p. 345

12.120.

M. Schütze, B. Glaser: The influence of Cl-containing atmospheres on creep crack growth at 800 °C. In: Heat-Resistant Materials II, ed. by K. Natesan, et al. (ASM International, Materials Park (Ohio) 1995) pp. 343–351

12.121.

M. Schütze: Anrißentstehung und Anrißwachstum unter korrosiven Bedingungen bei hohen Temperaturen. In: Korrosion und Bruch (DVM, Berlin 1988) p. 279

12.122.

K.-H. Döhle, A. Rahmel, M. Schmidt, M. Schütze: Two different test rigs for creep experiments in aggressive environments. In: Corrosion and Mechanical Stress at High Temperatures, ed. by V. Guttmann, M. Merz (Applied Science, London 1981) p. 441

Titel: Corrosion
verfasst von: Bernd Isecke, Dr.
Michael Schütze, Prof.
Hans-Henning Strehblow, Dr.
Verlag: Springer Berlin Heidelberg
Buch: Springer Handbook of Materials Measurement Methods
Print ISBN: 978-3-540-20785-6

Electronic ISBN: 978-3-540-30300-8

Copyright-Jahr: 2006
DOI: https://doi.org/10.1007/978-3-540-30300-8_12

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten