Top

Metallurgical and Materials Transactions A

Published in:

01-02-2014

Crack Healing in a Low-Carbon Steel Under Hot Plastic Deformation

Authors: Hailiang Yu, Xianghua Liu, Xinwen Li, Ajit Godbole

Published in: Metallurgical and Materials Transactions A | Issue 2/2014

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The behavior of internal crack healing in low-carbon steel samples undergoing hot plastic deformation was investigated using the MMS 200 thermo-mechanical simulator. The characterization of cracks after plastic deformation was analyzed using scanning electron microscopy under different heating temperatures, reduction ratios, numbers of deformation passes, strain rates, and holding time durations. It was found that the degree of crack healing increases with increasing heating temperature, reduction ratio, and holding time duration, and with decreasing number of deformation passes and strain rate.

previous article Microstructural Changes by Annealing in Ultrafine-Grained Electrodeposited Pure Iron

next article Distortion in a 7xxx Aluminum Alloy during Liquid Phase Sintering

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

K. M. Subramanian and P. Chandramohan: Mater. Manuf. Process., 2012, vol. 27, pp. 996-1000.CrossRef

H. Xie, Z. Jiang, and W.Y.D. Yuen: Metall. Mater. Trans. B, 2011, vol. 42, pp. 1244–52.CrossRef

K.W. Nam and J.S. Kim: J. Ceram. Process. Res., 2010, vol.11, pp. 20-24.

R. Girard, A. Faivre, and F. Despetis: J. Am. Ceram. Soc., 2011, vol.94, pp. 2402-2407.CrossRef

L. Yao, Y.C. Yuan, M.Z. Rong, and M.Q. Zhang: Polymer, 2011, vol. 52, pp. 3137–45.CrossRef

A. Hosoi, T. Nagahama, and Y. Ju: Mater. Sci. Eng. A, 2012, vol.533, pp. 38-42.CrossRef

X.G. Zheng, Y.N. Shi, and K. Lu: Mater. Sci. Eng. A, 2013, vol.561, pp.52-59.CrossRef

Y. Zhang and J. Han: Met. Sci. Heat Treat., 2012, doi:10.1007/s11041-012-9428-0.

F. Li, J. Pan, and A. Cocks: J. Am. Ceram. Soc., 2012, doi:10.1111/j.1551-2916.2012.05420.x.

10.

V.L. Kolmogorov and S.V. Smirnov: J. Mater. Process. Technol., 1998, vol.74, pp. 83-88.CrossRef

11.

H.L. Zhang, P.Z. Huang, J. Sun, and H. Gao: Appl. Phy. Let., 2004, vol.85, pp. 1143-1145.CrossRef

12.

D. Wei, J. Han, Z. Jiang, C. Lu, and K.A. Tieu: J. Mater. Process. Technol., 2006, vol.177, pp. 233-237.CrossRef

13.

S.J. Li, M.Y. Sun, H.W. Liu, and D.Z. Li: Acta Metall. Sin., 2011, vol.47, pp.946-953.

14.

S. Hautakangas, H. Schut, N. van Dijk, P. Castillo, and S. van der Zwaag: Scripta Mater., 2008, vol. 58, pp.719–22.CrossRef

15.

H.L. Yu and X.H. Liu: Mater. Manuf. Process., 2009,vol. 24, pp.570-580.CrossRef

16.

H.L. Yu, K. Tieu, C. Lu, G.Y. Deng, and X.H. Liu: Int. J. Adv. Manuf. Technol., 2012, doi:10.1007/s00170-012-4556-7.

17.

M.D. Hager, P. Greil, C. Leyens, S. van der Zwaag, and U.S. Schubert: Adv. Mater., 2010, vol. 22, pp. 5424–30.CrossRef

Title: Crack Healing in a Low-Carbon Steel Under Hot Plastic Deformation
Authors: Hailiang Yu
Xianghua Liu
Xinwen Li
Ajit Godbole
Publication date: 01-02-2014
Publisher: Springer US
Published in: Metallurgical and Materials Transactions A / Issue 2/2014
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-013-2049-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2014

Investigation into the Influence of Post-Weld Heat Treatment on the Friction Stir Welded AA6061 Al-Alloy Plates with Different Temper Conditions

A New Analytical Approach for the Velocity Field in Rolling Processes and Its Application in Through-Thickness Texture Prediction

Mechanical Property Enhancement of Ti-6Al-4V by Multilayer Thin Solid Film Ti/TiO2 Nanotubular Array Coating for Biomedical Application

Effect of Ultrasonic Vibration on Direct Reaction Between Solid Ti Powders and Liquid Al

Serration Phenomena Occurring During Tensile Tests of Three High-Manganese Twinning-Induced Plasticity (TWIP) Steels

Solidification of Sn-0.7Cu-0.15Zn Solder: In Situ Observation

Premium Partners