Top

Continuum Mechanics and Thermodynamics

Published in:

16-07-2020 | S.I. : Computational Mechanics of Materials

Crystal plasticity assessment of the effect of material parameters on contact depth during spherical indentation

Authors: Yinyin Li, Wei Jiang, Željko Božić

Published in: Continuum Mechanics and Thermodynamics | Issue 3/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The indentation test is one of the most commonly employed techniques for the characterization of mechanical properties of materials. It is an efficient and useful tool for the evaluation of mechanical properties of small volumes of materials, e.g., hardness, elastic modulus and fracture toughness, etc., through analyzing the relationship between contact force and contact depth on the indented specimens. As the contact depth is sensitive to the pile-up or sink-in of the indented specimens, crystal plasticity finite element method is used to study the phenomena of pile-up/sink-in during the spherical indentation simulation. The effects of single crystal plasticity material parameters on both the pile-up or sink-in behavior and macroscopic mechanical properties are studied. By comparing the effects of both macroscopic material parameters and crystal plasticity material parameters on the pile-up or sink-in behavior, the relationship between crystal plasticity material parameters and contact depth is revealed.

previous article Determination of horizon size in state-based peridynamics

next article A peridynamic-based machine learning model for one-dimensional and two-dimensional structures

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Pathak, S., Kalidindi, S.R.: Spherical nanoindentation stress–strain curves. Mater. Sci. Eng. R 91, 1–36 (2015). https://doi.org/10.1016/j.mser.2015.02.001CrossRef

Oliver, W.C., Pharr, G.M.: An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7(6), 1564–1583 (1992). https://doi.org/10.1557/Jmr.1992.1564CrossRefADS

Taljat, B., Zacharia, T., Kosel, F.: New analytical procedure to determine stress–strain curve from spherical indentation data. Int. J. Solids Struct. 35(33), 4411–4426 (1998). https://doi.org/10.1016/S0020-7683(97)00249-7CrossRefMATH

Kucharski, S., Mroz, Z.: Identification of plastic hardening parameters of metals from spherical indentation tests. Mater. Sci. Eng. A 318(1–2), 65–76 (2001). https://doi.org/10.1016/S0921-5093(01)01334-XCrossRef

Beghini, M., Bertini, L., Fontanari, V.: Evaluation of the stress–strain curve of metallic materials by spherical indentation. Int. J. Solids Struct. 43, 2441–2459 (2006). https://doi.org/10.1016/j.ijsolstr.2005.06.068CrossRefMATH

Hernot, X., Bartier, O., Bekouche, Y., El Abdi, R., Mauvoisin, G.: Influence of penetration depth and mechanical properties on contact radius determination for spherical indentation. Int. J. Solids Struct. 43(14–15), 4136–4153 (2006). https://doi.org/10.1016/j.ijsolstr.2005.06.007CrossRefMATH

Bolshakov, A., Pharr, G.M.: Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques. J. Mater. Res. 13(4), 1049–1058 (1998). https://doi.org/10.1557/Jmr.1998.0146CrossRefADS

Hill, R., Storakers, B., Zdunek, A.B.: A theoretical study of the Brinell hardness test. Proc. R. Soc. Lond. A 423(1865), 301–330 (1989). https://doi.org/10.1098/rspa.1989.0056CrossRefADSMATH

Collin, J.M., Mauvoisin, G., El Abdi, R.: An experimental method to determine the contact radius changes during a spherical instrumented indentation. Mech. Mater. 40(4–5), 401–406 (2008). https://doi.org/10.1016/j.mechmat.2007.10.002CrossRef

10.

Chen, L., Chen, J., Lebensohn, R.A., Ji, Y.Z., Heo, T.W., Bhattacharyya, S., Chang, K., Mathaudhu, S., Liu, Z.K., Chen, L.Q.: An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals. Comput. Methods Appl. Mech. Eng. 285, 829–848 (2015). https://doi.org/10.1016/j.cma.2014.12.007MathSciNetCrossRefADSMATH

11.

von Kobylinski, J., Lawitzki, R., Hofmann, M., Krempaszky, C., Werner, E.: Micromechanical behaviour of Ni-based superalloys close to the yield point: a comparative study between neutron diffraction on different polycrystalline microstructures and crystal plasticity finite element modelling. Contin. Mech. Thermodyn. 31, 691–702 (2019). https://doi.org/10.1007/s00161-018-0720-0CrossRefADS

12.

Fischer, T., Werner, E., Kyzy, S.U., Munz, O.: Crystal plasticity modeling of polycrystalline Ni-base superalloy honeycombs under combined thermo-mechanical loading. Contin. Mech. Thermodyn. 31, 703–713 (2019). https://doi.org/10.1007/s00161-018-0721-zCrossRefADS

13.

Wang, Y., Raabe, D., Kluber, C., Roters, F.: Orientation dependence of nanoindentation pile-up patterns and of nanoindentation microtextures in copper single crystals. Acta Mater. 52(8), 2229–2238 (2004). https://doi.org/10.1016/j.actamat.2004.01.016CrossRefADS

14.

Yao, W.Z., You, J.H.: Berkovich nanoindentation study of monocrystalline tungsten: a crystal plasticity study of surface pile-up deformation. Philos. Mag. 97(17), 1418–1435 (2017). https://doi.org/10.1080/14786435.2017.1299237CrossRefADS

15.

Taljat, B., Pharr, G.M.: Development of pile-up during spherical indentation of elastic–plastic solids. Int. J. Solids Struct. 41(14), 3891–3904 (2004). https://doi.org/10.1016/j.ijsolstr.2004.02.033CrossRefMATH

16.

Fischer-Cripps, A.C.: Nanoindentation, 3rd edn. Mechanical Engineering Series. Springer, New York (2004)

17.

Hill, R., Rice, J.R.: Constitutive analysis of elastic–plastic crystals at arbitrary strain. J. Mech. Phys. Solids 20(6), 401–413 (1972). https://doi.org/10.1016/0022-5096(72)90017-8CrossRefADSMATH

18.

Rice, J.R.: Inelastic constitutive relations for solids—an internal-variable theory and its application to metal plasticity. J. Mech. Phys. Solids 19(6), 433–455 (1971). https://doi.org/10.1016/0022-5096(71)90010-XCrossRefADSMATH

19.

Peirce, D., Asaro, R.J., Needleman, A.: Material rate dependence and localized deformation in crystalline solids. Acta Metall. 31(12), 1951–1976 (1983). https://doi.org/10.1016/0001-6160(83)90014-7CrossRef

20.

Asaro, R.J.: Micromechanics of crystals and polycrystals. Adv. Appl. Mech. 23, 1–115 (1983). https://doi.org/10.1016/S0065-2156(08)70242-4CrossRef

21.

Huang, Y.: A user-material subroutine incorporating single crystal plasticity in the abaqus finite element program (1991)

22.

Rodriguez, J., Garrido Maneiro, M.A.: A procedure to prevent pile up effects on the analysis of spherical indentation data in elastic–plastic materials. Mech. Mater. 39(11), 987–997 (2007). https://doi.org/10.1016/j.mechmat.2007.04.003CrossRef

23.

Bartier, O., Hernot, X., Mauvoisin, G.: Theoretical and experimental analysis of contact radius for spherical indentation. Mech. Mater. 42(6), 640–656 (2010). https://doi.org/10.1016/j.mechmat.2010.03.003CrossRef

24.

Phan, V.T., Nguyen, T.D., Bui, Q.H., Dirras, G.: Modelling of microstructural effects on the mechanical behavior of ultrafine-grained Nickel using crystal plasticity finite element model. Int. J. Eng. Sci. 94, 212–225 (2015). https://doi.org/10.1016/j.ijengsci.2015.03.008CrossRef

25.

Li, Y.Y., Jiang, W.: Multiscale finite element based trans-scale calculation method for polycrystalline materials. Mater. Res. Express (2019). https://doi.org/10.1088/2053-1591/Aaf459CrossRef

26.

Yao, W.Z., Krill, C.E., Albinski, B., Schneider, H.C., You, J.H.: Plastic material parameters and plastic anisotropy of tungsten single crystal: a spherical micro-indentation study. J. Mater. Sci. 49(10), 3705–3715 (2014). https://doi.org/10.1007/s10853-014-8080-zCrossRefADS

27.

Lu, J.W., Sun, W., Becker, A.: Material characterisation and finite element modelling of cyclic plasticity behaviour for 304 stainless steel using a crystal plasticity model. Int. J. Mech. Sci. 105, 315–329 (2016). https://doi.org/10.1016/j.ijmecsci.2015.11.024CrossRef

Title: Crystal plasticity assessment of the effect of material parameters on contact depth during spherical indentation
Authors: Yinyin Li
Wei Jiang
Željko Božić
Publication date: 16-07-2020
Publisher: Springer Berlin Heidelberg
Published in: Continuum Mechanics and Thermodynamics / Issue 3/2023
Print ISSN: 0935-1175
Electronic ISSN: 1432-0959
DOI: https://doi.org/10.1007/s00161-020-00901-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2023

An investigation on hydro-acoustic characteristics of submerged bodies with different geometric parameters

Coupled phase field and nonlocal integral elasticity analysis of stress-induced martensitic transformations at the nanoscale: boundary effects, limitations and contradictions

Effective strain gradient continuum model of metamaterials and size effects analysis

Finite memory model of bone healing in analysis of moving interface between mandible tissue and bone substitute material after tooth implant application

Thermo-mechano-chemical modeling and computation of thermosetting polymers used in post-installed fastening systems in concrete structures

Editorial for the IWCMM29 special issue

Premium Partners