Top

Polymer Science, Series D

Published in:

01-09-2022

Current State of the Problem of Adhesive Interaction Estimation Using Thermodynamic Characteristics

Authors: I. A. Starostina, N. V. Ulitin, O. V. Stoyanov

Published in: Polymer Science, Series D | Issue 3/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

We present a review and analysis of publications focused on the scientific prediction of adhesive interaction using the thermodynamic characteristics of the joined surfaces. The main theoretical characteristic of the adhesion of two different phases is the thermodynamic work of adhesion. This value can be measured by wetting methods in the presence of a liquid phase or by calculations. The main disadvantage in establishing the correlation is the very approximate agreement between the theoretical and experimental values of the adhesive strength. Methods for calculating the work of adhesion using quantum-chemical simulation and modeling of molecular dynamics are now widely used. We propose an original method for determining the work of adhesion for polymer–metal joints, which makes it possible to establish a correlation with the adhesive interaction value, which, in turn, is estimated by the cathodic-disbondment method.

previous article Interphase Interactions in Adhesive Compositions with Adjustable Thermal Conductivity

next article Thermoplastic-Based Binders for Polymer-Composite Materials (Literature Review)

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

D. K. Owens and R. C. Wendt, “Estimation of the surface free energy of polymers,” J. App. Polym. Sci. 13, 1741–1747 (1969).CrossRef

C. J. Van Oss, R. J. Good, and M. K. Chaudhury, “Additive and nonadditive surface tension components and the interpretation of contact angles,” Langmuir 4, 884–891 (1988).CrossRef

C. J. Van Oss, M. K. Chaudhury, and R. J. Good, “Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems,” Chem. Rev. 88, 927–941 (1988).CrossRef

R. J. Good, M. K. Chaudhury, and C. J. Van Oss, “Theory of Adhesive Forces Across Interfaces,” in Fundamentals of Adhesion, Ed. by L. H. Lee (Springer, Boston, MA, 1991), pp. 153–172.

C. Maierhofer, H.-W. Reinhardt, and G. Dobmann, Non-Destructive Evaluation of Reinforced Concrete Structures, Vol. 2 Nondestructive Testing Methods (CRC Press, Boca Raton, 2010).

E. Kraus, S. Kremling, B. Baudrit, et al., “Reflection time domain terahertz system for testing polymeric connections,” Polym. Res. J. 9, 345–353 (2015).

S. Horlemann, E. Kraus, B. Baudrit, et al., In-Situ testing of bonded polymer joints by means of computed tomography,” KGK rubberpoint 68, 28–32 (2015).

I. A. Starostina, M. V. Kolpakova, and O. V. Stoyanov, “An estimation of adhesive interaction of polymer coatings with metals using the van Oss–Chaudhury–Good equation,” Polym. Sci., Ser. D 14, 8–12 (2021)

I. A. Starostina, M. V. Kolpakova, and O. V. Stoyanov, “An estimation of adhesive interaction of polymer coatings with metals using the Owens-Wendt equation,” Vest. Tekhnolog. Univ. 22, 25–28 (2019).

10.

H. W. Fox and W. A. Zisman, “The spreading of liquids on low energy surfaces. I. Polytetrafluoroethylene,” J. Colloid Sci., No. 5, 514–531 (1950).CrossRef

11.

M. Levine, G. Ilkka, and P. Weiss, “Relation of the critical surface tension of polymers to adhesion,” J. Polym. Sci., Part B 2, 514—531 (1964).

12.

C. A. Dahlquist, “The Significance of Surface Energy in Adhesion,” in Aspects of Adhesion-5, Ed. by D. J. Alner (Univ. London Press, London, 1969), pp. 183–200.

13.

H. M. Scholberg and M. R. Huffield, Adhesion and Adhesives, Fundamentals and Practice (McKay, London, 1952).

14.

D. H. Kaelble, “Peel adhesion: influence of surface energies and adhesive rheology,” J. Adhesion 1, 102–123 (1969).CrossRef

15.

S. J. Muddarris, “Wetting kinetics and the strength of adhesive joints,” J. Adhesion 2, 42–49 (1970).CrossRef

16.

A. Gent and J. Schultz, “Effect of wetting liquids on the strength of adhesion of viscoelastic material,” J. Adhesion 3, 281–294 (1972).CrossRef

17.

L. H. Lee, “Significant Advances and Developments in Adhesion and Adhesives,” in Adhesion Science and Technology, Vol. 9a. Ed. by L. H. Lee (Plenum Press, New York, 1975), p. 129.

18.

D. Maugis, “Subcritical crack growth, surface energy, fracture toughness, stick-slip and embrittlement,” J. Materials Sci. 20, 3041– 3073 (1985).CrossRef

19.

F. M. Fowkes, “Role of acid-base interfacial bonding in adhesion,” J. Adhesion Sci. Techn. 1, 2–27 (1987).CrossRef

20.

F. M. Fowkes, “Quantitative characterization of the acid-base properties of solvents, polymers and inorganic surfaces,” J. Adhesion Sci. Techn. 4, 669–691 (1990).CrossRef

21.

M. F. Finlayson and B. A. Shah, “The influence of surface acidity and basicity on adhesion of poly(ethylene-co-acrylic acid) to aluminium,” J. Adhesion Sci. Techn. 4, 431–439 (1990).CrossRef

22.

B. R. Leggat, S. A. Taylor, and S. R. Taylor, “Adhesion of epoxy to hydrotalcite conversion coatings: I. Correlation with wettability and electrokinetic measurements,” Colloids Surf., A 210, 69–81 (2002).CrossRef

23.

E. J. Berger, “A method of determining the surface acidity of polymeric and metallic materials and its application to lap shear adhesion” J. Adhesion Sci. Techn. 4, 373–391 (1990).CrossRef

24.

P. E. Luner and E. Oh, “Characterization of the Surface Free Energy of Cellulose Ether Films,” Colloids Surf., A 181, 31–48 (2001).CrossRef

25.

E. McCafferty, “Acid-base effects in polymer adhesion at metal surfaces,” J. Adhesion Sci. Techn. 16, 239–255 (2002).CrossRef

26.

A. Kinloch, Adhesion and Adhesives: Science and Technology (Chapman & Hall; 1987; Mir, Moscow, 1991).

27.

Y. G. Bogdanova, V. D. Dolzhikova, I. M. Karzov, et al., “Prediction of Polymer Composites Strength Properties,” in Handbook of Research on Nanomaterials, Nanochemistry and Smart Materials (2012), pp. 177–186.

28.

V. Yu. Traskin, “An estimation of the adhesive strength to tear and wear in the liquid adhesion work to a body.” Vestnik Mosk. Univ., Ser. 2 Chemistry 45, 376—381 (2004).

29.

D. V. Kramarev, V. S. Osipchik, N. M. Chalaya, et al., “Studies of interphase phenomena on the fiber—binder interface in imdidoorganoplastics,” Plast. Massy, No. 7, 3–6 (2017).

30.

S. Kisin, J. Božović Vukić, P. G. Th. J. van der Varst, et al. “Estimating the polymer-metal work of adhesion from molecular dynamics simulations,” Chem. Mater. 19, 903–907 (2007).CrossRef

31.

K. Anand, Th. Duguet, J. Esvan, et al., “Chemical interactions at the Al/poly-epoxy interface rationalized by DFT calculations and a comparative XPS analysis,” ACS Appl. Mater. Interfaces 12, 57649–57665 (2020).CrossRefPubMed

32.

T. Semoto, Y. Tsuji, and K. Yoshizawa, “Molecular understanding of the adhesive force between a metal oxide surface and an epoxy resin,” J. Phys. Chem. 11, 11701–11708 (2011).

33.

A. Anastassiou and V. G. Mavrantzas, “Molecular structure and work of adhesion of poly(N-butyl acrylate) and poly(N-butyl acrylate-co-acrylic acid) on α-quartz, α-ferric oxide, and α-ferrite from detailed molecular dynamics simulations,” Macromolecules 48, 8262–8284 (2015).CrossRef

34.

G. Bahlakeh, B. Ramezanzadeh, M. R. Saeb, et al., “Corrosion protection properties and interfacial adhesion mechanism of an epoxy/polyamide coating applied on the steel surface decorated with cerium oxide nanofilm: complementary experimental, molecular dynamics (MD) and first principle quantum mechanics (QM) simulation methods,” Appl. Surf. Sci. 419, 650–669 (2017).CrossRef

35.

I. A. Starostina, N. V. Sokorova, O. V. Stoyanov, et al., “The correspondence of detachment characteristics and acid-base interactions measures,” Polym. Sci., Ser. D 6, 154–156 (2013).

36.

I. A. Starostina, M. V. Kolpakova, and O. V. Stoyanov, “An estimation of adhesive interaction of polymer coatings with metals using the Van Oss-Chaudhury-Good equation,” Polym. Sci., Ser. D 14, 8–12 (2021).

Title: Current State of the Problem of Adhesive Interaction Estimation Using Thermodynamic Characteristics
Authors: I. A. Starostina
N. V. Ulitin
O. V. Stoyanov
Publication date: 01-09-2022
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 3/2022
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421222030297

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2022

Interphase Interactions in Adhesive Compositions with Adjustable Thermal Conductivity

General Regularities and Features of Photodegradation of Polyphenylene Sulfide Modified by Ethylene and Glycidyl–Methacrylate Copolymer

Deformation Properties of Elastic Adhesive in Adhesive Joints under Quasi-Static Low-Cycle Mechanical Loads

The Influence of the Medium Polarity on the Molecular Weight of Poly-2-hydroxyethyl Methacrylate

The Effect of Paper Type on the Impregnation and Lamination of Wooden Boards

Optimizing an EDI Epoxy Binder Using the Pareto Method

Premium Partners