Top

Journal of Intelligent Manufacturing

Published in:

19-08-2022

Data-manifold-based monitoring and anomaly diagnosis for manufacturing process

Authors: Faping Zhang, Jialun Zhang, Junjiu Ma

Published in: Journal of Intelligent Manufacturing | Issue 7/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Aiming to solve the problems of the inaccurate dimension reduction of high-dimensional data and insufficient information utilization in traditional manufacturing process monitoring methods—in which mostly only the distance information of pairwise points is used as the similarity index for the data dimension reduction—this paper proposes a data-manifold-based monitoring method that combines the distance information and angle information of pairwise points. First, the intrinsic dimension of manufacturing process data is estimated by combining multiple geometric features on the data manifold. Second, considering the angle information and distance information in the neighborhood of process data, the method to construct local features of the data manifold is given; further, a fusion method of local features and global–local features of manifold data based on the eigendimension is proposed, which constructs the data dimension-reduction mapping matrix to improve the integrity of data information extraction. Then, the data index of process monitoring is given and employed to monitor the manufacturing process. Finally, Tennessee Eastman (TE) process simulation data were used to verify the effectiveness of the proposed method. The results show that compared with other methods, the anomaly detection rate of the proposed method was increased by more than 50%, while the false alarm rate was decreased by 21.4%, which proves that the method can significantly improve the efficiency of manufacturing process anomaly monitoring.

previous article Imbalanced fault diagnosis based on semi-supervised ensemble learning

next article Extracting and supplementing method for EEG signal in manufacturing workshop based on deep learning of time–frequency correlation

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Cai, B., Liu, Y., Fan, Q., Zhang Y., Liu, Z., Yu, S., & Ji, R. (2014). Multi-source information fusion based fault diagnosis of ground-source heat pump using Bayesian network. Applied Energy, 114(2), 1–9. https://doi.org/10.1016/j.apenergy.2013.09.043CrossRef

Costa, J., & Hero, A. (2003). Manifold learning with geodesic minimal spanning trees. Eprint Arxiv Cs.

Cui, P., Wang, X., & Yang, Y. (2020). Statistics manifold learning approach and its application to non-Gaussian process monitoring. In 39th Chinese control conference (CCC) (pp. 4054–4059). https://doi.org/10.23919/CCC50068.2020.9189523

Cui, P., Wang, X., & Yang, Y. (2022). Nonparametric manifold learning approach for improved process monitoring. Canadian Journal of Chemical Engineering, 100(1), 67–89. https://doi.org/10.1002/cjce.24066CrossRef

Del Castillo, E., & Zhao, X. (2020). Industrial statistics and manifold data. Quality Engineering, 32(2), 155–167.CrossRef

Deng, X., & Tian, X. (2013). Nonlinear process fault pattern recognition using statistics kernel PCA similarity factor. Neurocomputing, 121(9), 298–308. https://doi.org/10.1016/j.neucom.2013.04.042CrossRef

Gao, Z., Jia, M., Mao, Z., & Zhao, L. (2019). Transitional phase modeling and monitoring with respect to the effect of its neighboring phases. Chemical Engineering Research and Design, 145, 288–299. https://doi.org/10.1016/j.cherd.2019.03.023CrossRef

Grassberger, P., & Procaccia, I. (1983). Characterization of strange attractors. Physical Review Letters, 50(5), 346. https://doi.org/10.1103/PhysRevLett.50.346CrossRef

Gu, X., Li, Y., & Jia, J. (2015). Feature selection for transient stability assessment based on kernelized fuzzy rough sets and memetic algorithm. International Journal of Electrical Power and Energy Systems, 64, 664–670. https://doi.org/10.1016/j.ijepes.2014.07.070CrossRef

He, J., Ding, L., Jiang, L., Li, Z., & Hu, Q. (2014). Intrinsic dimensionality estimation based on manifold assumption. Journal of Visual Communication and Image Representation, 25(5), 740–747. https://doi.org/10.1016/j.jvcir.2014.01.006CrossRef

Himes, D., Storer, R., & Georgakis, C. (1994). Determination of the number of principal components for disturbance detection and isolation. In American control conference (Vol. 2, pp. 1279–1283). IEEE. https://doi.org/10.1109/ACC.1994.752265

Horn, J. (1965). A rationale and test for the number of factors in factor analysis. Psychometrica, 30, 73–77. https://doi.org/10.1007/BF02289447CrossRef

Huang, K., Wu, Y., Long, C., Ji, H., Sun, B., Chen, X., & Yang, C. (2021). Adaptive process monitoring via online dictionary learning and its industrial application. ISA Transactions, 114, 399–412. https://doi.org/10.1016/j.isatra.2020.12.046CrossRef

Ismail, M., Mostafa, N. A., & El-Assal, A. (2021). Quality monitoring in multistage manufacturing systems by using machine learning techniques. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-021-01792-1CrossRef

Jin, M., Ren, L., Xu, Z., & Zhao, X. (2014). Reliable fault diagnosis method using ensemble fuzzy ARTMAP based on improved Bayesian belief method. Neurocomputing, 133(6), 309–316. https://doi.org/10.1016/j.neucom.2013.11.005CrossRef

Lee, W. J., Mendis, G. P., Triebe, M. J., & Sutherland, J. W. (2020). Monitoring of a machining process using kernel principal component analysis and kernel density estimation. Journal of Intelligent Manufacturing, 31(5), 1175–1189. https://doi.org/10.1007/s10845-019-01504-wCrossRef

Liao, Y. B., Ihab, R., Huang, Z. Y., & Scott, K. (2021). Manufacturing process monitoring using time-frequency representation and transfer learning of deep neural networks. Journal of Manufacturing Processes, 68, 231–248. https://doi.org/10.1016/j.jmapro.2021.05.046CrossRef

Liu, J., Wang, J., Liu, X., Ma, T., & Tang, Z. (2021). MWRSPCA: Online fault monitoring based on moving window recursive sparse principal component analysis. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-020-01721-8CrossRef

Luo, L. (2014). Process monitoring with global–local preserving projections. Industrial and Engineering Chemistry Research, 53(18), 7696–7705. https://doi.org/10.1021/ie4039345CrossRef

Ma, Y. (2014). Study on feature extraction methods for fault detection of industrial process. South China University of Technology.

Ma, Y., Song, B., Shi, H., & Yang, Y. (2015). Fault detection via local and nonlocal embedding. Chemical Engineering Research and Design, 94, 538–548. https://doi.org/10.1016/j.cherd.2014.09.015CrossRef

Qin, S. (2003). Statistical process monitoring: Basics and beyond. Journal of Chemometrics, 17(8–9), 480–502. https://doi.org/10.1002/cem.800CrossRef

Qin, S., & Zheng, Y. (2013). Quality-relevant and process-relevant fault monitoring with concurrent projection to latent structures. AIChE Journal, 59(2), 496–504. https://doi.org/10.1002/aic.13959CrossRef

Raginsky, M., & Lazebnik, S. (2006). Estimation of intrinsic dimensionality using high-rate vector quantization. In NIPS 2006 (Vol. 18, pp. 1105–1112).

Said, M., Abdellafou, K. B., & Taouali, O. (2020). Machine learning technique for data-driven fault detection of nonlinear processes. Journal of Intelligent Manufacturing, 31(4), 865–884. https://doi.org/10.1007/s10845-019-01483-yCrossRef

Sarabi, A., Araabi, B., & Augustin, T. (2013). Information-based dissimilarity assessment in Dempster-Shafer theory. Knowledge-Based Systems, 2013(54), 114–127. https://doi.org/10.1016/j.knosys.2013.08.030CrossRef

Seung, H. (2000). The manifold ways of perception. Science, 290(5500), 2268–2269.CrossRef

Shu, W., & Shen, H. (2014). Incremental feature selection based on rough set in dynamic incomplete data. Pattern Recognition, 47(12), 3890–3906. https://doi.org/10.1016/j.patcog.2014.06.002CrossRef

Sun, W., Zhao, R., Yan, R., Shao, S., & Chen, X. (2017). Convolutional discriminative feature learning for induction motor fault diagnosis. IEEE Transactions on Industrial Informatics, 13(3), 1350–1359. https://doi.org/10.1109/TII.2017.2672988CrossRef

Sun, Y., Qin, W., Zhuang, Z., & Xu, H. (2021). An adaptive fault detection and root-cause analysis scheme for complex industrial processes using moving window KPCA and information geometric causal inference. Journal of Intelligent Manufacturing, 32, 2007–2021. https://doi.org/10.1007/s10845-021-01752-9CrossRef

Sun, Yu., Zeng, Z., Long, B., Li, J., de Oliveira, J. V., & Li, C. (2019). A comparison of dimension reduction techniques for support vector machine modeling of multi-parameter manufacturing quality prediction. Journal of Intelligent Manufacturing, 30, 2245–2256. https://doi.org/10.1007/s10845-017-1388-1CrossRef

Svante, W. (1978). Cross-validatory estimation of the number of components in factor and principal components models. Technometrics, 20(4), 397–405. https://doi.org/10.2307/1267639CrossRef

Tong, C., Shi, X., & Lan, T. (2016). Statistical process monitoring based on orthogonal multi-manifold projections and a novel variable contribution analysis. ISA Transactions. https://doi.org/10.1016/j.isatra.2016.06.017CrossRef

Vanini, Z., Khorasani, K., & Meskin, N. (2014). Fault detection and isolation of a dual spool gas turbine engine using dynamic neural networks and multiple model approach. Information Sciences, 259, 234–251. https://doi.org/10.1016/j.ins.2013.05.032CrossRef

Wang, X., Liu, C., Bi, F., Bi, X., & Shao, K. (2013). Fault diagnosis of diesel engine based on adaptive wavelet packets and EEMD-fractal dimension. Mechanical Systems and Signal Processing, 41(1–2), 581–597. https://doi.org/10.1016/j.ymssp.2013.07.009CrossRef

Xu, X., Ding, J., Liu, Q., & Chai, T. (2020). A novel multi-manifold joint projections model for multimode process monitoring. IEEE Transactions on Industrial Informatics. https://doi.org/10.1109/TII.2020.3036676CrossRef

Yu, J. (2012). Local and global principal component analysis for process monitoring. Journal of Process Control, 22(7), 1358–1373. https://doi.org/10.1016/j.jprocont.2012.06.008CrossRef

Yu, J. (2016). Process monitoring through manifold regularization-based GMM with global/local information. Journal of Process Control, 45, 84–99. https://doi.org/10.1016/j.jprocont.2016.07.006CrossRef

Zhan, C., Li, S., & Yang, Y. (2019). Improved process monitoring based on global–local manifold analysis and statistical local approach for industrial process. Journal of Process Control, 75, 107–119. https://doi.org/10.1016/j.jprocont.2018.12.016CrossRef

Zhang, M., Ge, Z., Song, Z., & Fu, R. (2011). Global–local structure analysis model and its application for fault detection and identification. Industrial & Engineering Chemistry Research, 50, 6837–6848. https://doi.org/10.1021/ie102564dCrossRef

Zhang, M. G. (2011). Statistical process monitoring methods based on local–global structure analysis. Zhejiang University.

Title: Data-manifold-based monitoring and anomaly diagnosis for manufacturing process
Authors: Faping Zhang
Jialun Zhang
Junjiu Ma
Publication date: 19-08-2022
Publisher: Springer US
Published in: Journal of Intelligent Manufacturing / Issue 7/2023
Print ISSN: 0956-5515
Electronic ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-022-01978-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2023

Federated learning-based collaborative manufacturing for complex parts

Evaluation of the reliability of resistance spot welding control via on-line monitoring of dynamic resistance

An adaptive feature reconstruction network for the precise segmentation of surface defects on printed circuit boards

A digital apprentice for chatter detection in machining via human–machine interaction

Combining human guidance and structured task execution during physical human–robot collaboration

Knowledge-embedded machine learning and its applications in smart manufacturing

Premium Partners