Top

The International Journal of Advanced Manufacturing Technology

Published in:

30-08-2022 | ORIGINAL ARTICLE

Deformation control of thin-walled parts based on the reverse segment method

Authors: Qinglong Hao, Zhengqing Zhu, Chuanrui Si, Zijian Dong, Yupeng Wu, Zhitong Chen

Published in: The International Journal of Advanced Manufacturing Technology | Issue 3-4/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The aero-engine blade is typically a thin-walled part with poor rigidity and a complex structure. This causes aero-engine blades to be susceptible to flutter and deformation during the machining processing, leading to the dimensional and positional accuracy outside the stipulated tolerance values. With the aim of improving the machining precision of the blades, the conventional blade processing methods were analysed in this study. Based on the analysis, a novel deformation control method named reverse segment machining method was proposed. Additionally, a stress-free auxiliary fixture was designed to improve the stiffness of thin-walled parts. Finally, an experiment was conducted to study the effectiveness of the developed reverse segment method and the stress-free auxiliary fixture in comparison to the forward machining methods. The results show that they can significantly improve machining precision.

previous article Allocation of geometric tolerances in one-dimensional stackup problems

next article Modeling and multi-response optimization of cutting parameters in turning of AISI 316L using RSM and desirability function approach

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Wan XJ, Zhang Y, Huang XD (2013) Investigation of influence of fixture layout on dynamic response of thin-wall multi-framed workpiece in machining. Int J Mach Tools Manuf 75:87–99. https://doi.org/10.1016/j.ijmachtools.2013.09.008CrossRef

Hao X, Li Y, Chen G, Liu C (2018) 6+X locating principle based on dynamic mass centers of structural parts machined by responsive fixtures. Int J Mach Tools Manuf 125:112–122. https://doi.org/10.1016/j.ijmachtools.2017.11.006CrossRef

Yu JH, Chen ZT, Jiang ZP (2016) A control process for machining distortion by using an adaptive dual-sphere fixture. Int J Adv Manuf Technol 86:3463–3470. https://doi.org/10.1007/s00170-016-8470-2CrossRef

Zeng S, Wan X, Li W, Yin Z, Xiong Y (2012) A novel approach to fixture design on suppressing machining vibration of flexible workpiece. Int J Mach Tools Manuf 58:29–43. https://doi.org/10.1016/j.ijmachtools.2012.02.008CrossRef

Hao Q, Yang Q (2020) A self-adaptive auxiliary fixture for deformation control in blade machining. Int J Adv Manuf Technol 111(5–6):1–9. https://doi.org/10.1007/s00170-020-06171-3CrossRef

Jiang XH, Zhang Y, Lu W, Gao S, Liu L, Liu X (2020) Characteristics of shear stress based on magnetorheological fluid flexible fixture during milling of the thin-walled part. Int J Adv Manuf Technol 108:2607–2619. https://doi.org/10.1007/s00170-020-05439-yCrossRef

Yang Y, Xu D, Liu Q (2015) Vibration suppression of thin-walled workpiece machining based on electromagnetic induction. Mater Manuf Processes 30:829–835. https://doi.org/10.1080/10426914.2014.962042CrossRef

Singh R, Deiab IM (2018) Non-contact auxiliary fixture for machining stability improvement of thin flexible workpieces using eddy currents. Int J Interact Des Manuf 13:1–18. https://doi.org/10.1007/s12008-018-0495-3CrossRef

Huang X, Sun J, Li J (2015) Effect of initial residual stress and machining-induced residual stress on the deformation of aluminium alloy plate. J Mech Eng 61(2):131137

10.

Li X, Li L, Yang Y, Zhao G, He N, Schmidt E (2021) Variance-based sensitivity analysis for the influence of residual stress on machining deformation. J Manuf Process 68:1072–1085. https://doi.org/10.1016/j.jmapro.2021.06.032CrossRef

11.

D’Alvise L, Chantzis D, Schoinochoritis B, Salonitis K (2015) Modelling of part distortion due to residual stresses relaxation: an aeronautical case study. Procedia CIRP 31:447–452. https://doi.org/10.1016/j.procir.2015.03.069CrossRef

12.

Gao H, Zhang Y, Wu Q, Li B (2018) Investigation on influences of initial residual stress on thin-walled part machining deformation based on a semi-analytical model. J Mater Process Technol 262:437–448. https://doi.org/10.1016/j.jmatprotec.2018.04.009CrossRef

13.

Wan XJ, Hua L, Wang XF, Peng QZ, Qin XP (2011) An error control approach to tool path adjustment conforming to the deformation of thin-walled workpiece. Int J Mach Tools Manuf 51(3):221–229. https://doi.org/10.1016/j.ijmachtools.2010.11.007CrossRef

14.

Chen Y, Tang H, Tang Q, Zhang A, Chen D, Li K (2017) Machining error decomposition and compensation of complicated surfaces by EMD method. Measurement 116:341–349. https://doi.org/10.1016/j.measurement.2017.11.027CrossRef

15.

Huang N, Bi Q, Wang Y, Sun C (2014) 5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement. Int J Mach Tools Manuf 84:1–8. https://doi.org/10.1016/j.ijmachtools.2014.04.004CrossRef

Title: Deformation control of thin-walled parts based on the reverse segment method
Authors: Qinglong Hao
Zhengqing Zhu
Chuanrui Si
Zijian Dong
Yupeng Wu
Zhitong Chen
Publication date: 30-08-2022
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 3-4/2022
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-09850-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2022

Influence of sheet thickness on mechanical behaviors of the clinched joints produced by single-point butt clinching process

A review of molecular dynamics simulation in studying surface generation mechanism in ultra-precision cutting

Improvement of circular hole flanging height using multi-directional electromagnetic flanging

Modeling of oxide-film thickness in electrolytic in-process dressing grinding with workpiece swing

An approach to weld dissimilar polycarbonate and high-density polyethylene by friction stir spot welding

Optimization of EDM process parameters based on variable-fidelity surrogate model

Premium Partners