Top

The International Journal of Advanced Manufacturing Technology

Published in:

01-09-2022 | ORIGINAL ARTICLE

Delamination in drilling of jute/cork-reinforced polymer biosandwich materials: optimization by response surface methodology and genetic algorithm

Authors: Ahmed Belaadi, Messaouda Boumaaza, Hassan Alshahrani, Mostefa Bourchak

Published in: The International Journal of Advanced Manufacturing Technology | Issue 3-4/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The best practice to obtain a high-quality hole drilling is to minimize the delamination factor during the drilling process. This can be assured by correctly selecting the appropriate process parameters. The most significant parameters affecting the performance response are feed rate (f), spindle speed (N) and drill diameter (d). The current study aims to identify appropriate tools for drilling the hybrid jute/cork biosandwich based on multi-objective response surface methodology (RSM) and genetic algorithm (GA). The work aims to optimize the drilling parameters for minimizing the delamination factor of two tools, one made from High Speed Steel (HSS) and the other made from High Speed Steel covered with Titanium Nitride (HSS-TiN). The results revealed that the HSS-TiN tool is the more suitable to achieve a minimum delamination of 1.165 compared to the HSS tool (1.214 and 1.249 obtained by RSM and GA, respectively), with 50 mm/min feed rate, 1800 rpm spindle speed and a 5-mm diameter.

previous article Multiseam tracking with a portable robotic welding system in unstructured environments

next article Inconel 718–copper parts fabricated by 3D multi-material laser powder bed fusion: a novel technological and designing approach for rocket engine

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Jia R, Wang Q, Feng P (2021) A comprehensive overview of fibre-reinforced gypsum-based composites (FRGCs) in the construction field. Compos Part B Eng 205:108540. https://doi.org/10.1016/j.compositesb.2020.108540CrossRef

Friedrich D (2021) Thermoplastic moulding of Wood-Polymer Composites (WPC): a review on physical and mechanical behaviour under hot-pressing technique. Compos Struct 262:113649. https://doi.org/10.1016/j.compstruct.2021.113649CrossRef

Thakur VK, Thakur MK (2014) Processing and characterization of natural cellulose fibers/thermoset polymer composites. Carbohydr Polym 109:102–117. https://doi.org/10.1016/j.carbpol.2014.03.039CrossRef

Tavares TD, Antunes JC, Ferreira F, Felgueiras HP (2020) Biofunctionalization of natural fiber-reinforced biocomposites for biomedical applications. Biomol 10

Lefeuvre A, Bourmaud A, Morvan C, Baley C (2014) Tensile properties of elementary fibres of flax and glass: analysis of reproducibility and scattering. Mater Lett 130:289–291. https://doi.org/10.1016/j.matlet.2014.05.115CrossRef

Boumaaza M, Belaadi A, Bourchak M (2022) Systematic review on reinforcing mortars with natural fibers: challenges of environment-friendly option. J Nat Fibers 1–25. https://doi.org/10.1080/15440478.2022.2060408CrossRef

Mokhothu TH, John MJ (2015) Review on hygroscopic aging of cellulose fibres and their biocomposites. Carbohydr Polym 131:337–354. https://doi.org/10.1016/j.carbpol.2015.06.027CrossRef

Savic A, Antonijevic D, Jelic I, Zakic D (2020) Thermomechanical behavior of bio-fiber composite thermal insulation panels. Energy Build 229:110511. https://doi.org/10.1016/j.enbuild.2020.110511CrossRef

Malik K, Ahmad F, Gunister E (2021) Drilling performance of natural fiber reinforced polymer composites: a review. J Nat Fibers 1–19. https://doi.org/10.1080/15440478.2020.1870624CrossRef

10.

Dembri I, Belaadi A, Boumaaza M et al (2022) Drilling performance of short Washingtonia filifera fiber–reinforced epoxy biocomposites: RSM modeling. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-022-09849-yCrossRef

11.

Abd-Elwahed MS (2022) Drilling process of GFRP composites: modeling and optimization using hybrid ANN. Sustain 14

12.

Chandramohan D, Marimuthu K (2011) Drilling of natural fiber particle reinforced polymer composite material. Int J Adv Eng Res Stud I:134–145

13.

Athijayamani A, Thiruchitrambalam M, Natarajan U, Pazhanivel B (2010) Influence of alkali-treated fibers on the mechanical properties and machinability of roselle and sisal fiber hybrid polyester composite. Polym Compos 31:723–731. https://doi.org/10.1002/pc.20853CrossRef

14.

Mylsamy K, Rajendran I (2011) Influence of alkali treatment and fibre length on mechanical properties of short Agave fibre reinforced epoxy composites. Mater Des 32:4629–4640. https://doi.org/10.1016/j.matdes.2011.04.029CrossRef

15.

Dilli Babu G, Sivaji Babu K, Uma Maheswar Gowd B (2013) Optimization of machining parameters in drilling hemp fiber reinforced composites to maximize the tensile strength using design experiments. Indian J Eng Mater Sci

16.

Jayabal S, Velumani S, Navaneethakrishnan P, Palanikumar K (2013) Mechanical and machinability behaviors of woven coir fiber-reinforced polyester composite. Fibers Polym. https://doi.org/10.1007/s12221-013-1505-5CrossRef

17.

Venkateshwaran N, ElayaPerumal A (2013) Hole quality evaluation of natural fiber composite using image analysis technique. J Reinf Plast Compos 32:1188–1197. https://doi.org/10.1177/0731684413486847CrossRef

18.

Debnath K, Singh I, Dvivedi A (2014) Drilling characteristics of sisal fiber-reinforced epoxy and polypropylene composites. Mater Manuf Process 29:1401–1409. https://doi.org/10.1080/10426914.2014.941870CrossRef

19.

Patel K, Chaudhary V, Gohil PP, Patel K (2015) Investigation on drilling of banana fibre reinforced composites BT–Proceedings of the 2nd International Conference on Civil, Materials and Environmental Sciences. Atlantis Press, pp 201–205

20.

Jayabal S, Natarajan U (2010) Optimization of thrust force, torque, and tool wear in drilling of coir fiber-reinforced composites using Nelder-Mead and genetic algorithm methods. Int J Adv Manuf Technol 51:371–381. https://doi.org/10.1007/s00170-010-2605-7CrossRef

21.

Jayabal S, Natarajan U (2011) Drilling analysis of coir – fibre-reinforced polyester composites. Bull Mater Sci 34:1563–1567. https://doi.org/10.1007/s12034-011-0359-yCrossRef

22.

Tabet Z, Belaadi A, Boumaaza M, Bourchak M (2021) Drilling of a bidirectional jute fibre and cork-reinforced polymer biosandwich structure: ANN and RSM approaches for modelling and optimization. Int J Adv Manuf Technol 117:3819–3839. https://doi.org/10.21203/rs.3.rs-503708/v1CrossRef

23.

Adda B, Belaadi A, Boumaaza M, Bourchak M (2021) Experimental investigation and optimization of delamination factors in the drilling of jute fiber–reinforced polymer biocomposites with multiple estimators. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-021-07628-9CrossRef

24.

Belaadi A, Laouici H, Bourchak M (2020) Mechanical and drilling performance of short jute fibre-reinforced polymer biocomposites: statistical approach. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-04761-4CrossRef

25.

Belaadi A, Boumaaza M, Amroune S, Bourchak M (2020) Mechanical characterization and optimization of delamination factor in drilling bidirectional jute fibre-reinforced polymer biocomposites. Int J Adv Manuf Technol 111:2073–2094. https://doi.org/10.1007/s00170-020-06217-6CrossRef

26.

Cherief M, Belaadi A, Bouakba M et al (2020) Behaviour of lignocellulosic fibre-reinforced cellular core under low-velocity impact loading: Taguchi method. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-020-05393-9CrossRef

27.

Holbery J, Houston D (2006) Natural-fiber-reinforced polymer composites in automotive applications. JOM 58

28.

Saaidia A, Belaadi A, Haddad A (2022) Moisture absorption of cork-based biosandwich material extracted from Quercussuber L. Plant: ANN and Fick’s modelling. J Nat Fibers 1–18. https://doi.org/10.1080/15440478.2022.2072996CrossRef

29.

Davim JP, Rubio JC, Abrao AM (2007) A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates. Compos Sci Technol 67:1939–1945. https://doi.org/10.1016/j.compscitech.2006.10.009CrossRef

30.

Sridharan V, Muthukrishnan N (2013) Optimization of machinability of polyester/modified jute fabric composite using grey relational analysis (GRA). Procedia Eng

31.

Sridharan V, Raja T, Muthukrishnan N (2016) Study of the effect of matrix, fibre treatment and graphene on delamination by drilling jute/epoxy nanohybrid composite. Arab J Sci Eng 10–14. https://doi.org/10.1007/s13369-015-2005-2CrossRef

32.

Kumar K, Verma RK (2022) Measurement and evaluation of delamination factors and thrust force generation during drilling of multiwall carbon nanotube (MWCNT) modified polymer laminates. Arch Mech Eng 0–2. https://doi.org/10.24425/ame.2022.140417CrossRef

33.

Ramaswamy A, Perumal AV (2020) Multi-objective optimization of drilling EDM process parameters of LM13 Al alloy–10ZrB2–5TiC hybrid composite using RSM. J Braz Soc Mech Sci Eng 42:432. https://doi.org/10.1007/s40430-020-02518-9CrossRef

34.

Boumaaza M, Belaadi A, Bourchak M (2021) The effect of alkaline treatment on mechanical performance of natural fibers-reinforced plaster: optimization using RSM. J Nat Fibers 18:2220–2240. https://doi.org/10.1080/15440478.2020.1724236CrossRef

35.

Boumaaza M, Belaadi A, Bourchak M et al (2022) Comparative study of flexural properties prediction of Washingtonia filifera rachis biochar bio-mortar by ANN and RSM models. Constr Build Mater 318:125985. https://doi.org/10.1016/j.conbuildmat.2021.125985

36.

Belaadi A, Boumaaza M, Amroune S, Bourchak M (2020) Mechanical characterization and optimization of delamination factor in drilling bidirectional jute fibre-reinforced polymer biocomposites. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-020-06217-6CrossRef

37.

Boumaaza M, Belaadi A, Bourchak M (2021) The effect of alkaline treatment on mechanical performance of natural fibers-reinforced plaster: Part II Optimization comparison between ANN and RSM statistics. J Nat Fibers 1–16. https://doi.org/10.1080/15440478.2021.1964129CrossRef

38.

Benzannache N, Belaadi A, Boumaaza M, Bourchak M (2021) Improving the mechanical performance of biocomposite plaster/Washingtonian filifira fibres using the RSM method. J Build Eng. https://doi.org/10.1016/j.jobe.2020.101840CrossRef

39.

Vijayan D, Rajmohan T (2019) Modeling and evolutionary computation on drilling of carbon fiber-reinforced polymer nanocomposite: an integrated approach using RSM based PSO. J Braz Soc Mech Sci Eng 41:395. https://doi.org/10.1007/s40430-019-1892-7CrossRef

40.

Qiu X, Li P, Li C et al (2018) Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP. Compos Struct 203:404–413. https://doi.org/10.1016/j.compstruct.2018.07.007CrossRef

41.

Abilash N, Sivapragash M (2016) Optimizing the delamination failure in bamboo fiber reinforced polyester composite. J King Saud Univ - Eng Sci 28:92–102. https://doi.org/10.1016/j.jksues.2013.09.004CrossRef

42.

Ramya Devi G, Palanikumar K (2019) Analysis on drilling of woven glass fibre reinforced aluminium sandwich laminates. J Mater Res Technol 8:1024–1035. https://doi.org/10.1016/j.jmrt.2018.06.021CrossRef

43.

Babu GD, Babu KS, Gowd BUM (2013) Effect of machining parameters on milled natural fiber-reinforced plastic composites. J Adv Mech Eng 1(1):1–12. https://doi.org/10.7726/jame.2013.1001CrossRef

Title: Delamination in drilling of jute/cork-reinforced polymer biosandwich materials: optimization by response surface methodology and genetic algorithm
Authors: Ahmed Belaadi
Messaouda Boumaaza
Hassan Alshahrani
Mostefa Bourchak
Publication date: 01-09-2022
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 3-4/2022
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-10001-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2022

Ultrasonic and electrical discharge–assisted milling of the Ti-6Al-4 V alloy

Study on coating morphology, property, and characteristics of in situ synthesis VC-reinforced Ni-based coatings by laser cladding

Improvement of circular hole flanging height using multi-directional electromagnetic flanging

Characterization of the effects of high-intensity negative current pulses on metal transfer and melting rate in the AC-GMAW process

Failure mode classification for condition-based maintenance in a bearing ring grinding machine

Numerical simulation of DC casting of large-size rare earth magnesium alloy ingot under low-frequency electromagnetic field

Premium Partners