Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Tribology Letters
Published in: Tribology Letters 2/2019

01-06-2019 | Original Paper

Densification Behaviour and Wear Performance of Brass-Based Composite Reinforced with SiO2 Nanoparticles: Switchable Water Pump Clutch Application

Authors: Nianlian Li, Vanessa Bouchart, Pierre Chevrier, Hongyan Ding

Published in: Tribology Letters | Issue 2/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The friction disc and the impeller ring of a switchable water pump (SWP), having a similar principle to that of the wet clutch of an automobile, but it also exhibits a relatively low pressure, a high velocity and temperature. However, SWP possesses an inadequate friction coefficient that has a high tendency to result in the relative slip and severe wear of the counterparts. To acquire such a friction material with an improved friction coefficient and wear resistance to satisfy the new operating condition of SWPs, brass-based composites reinforced by SiO2 nanoparticles were successfully fabricated by the powder sintering in this study, and the influence of the mass fraction of SiO2 nanoparticles on the friction and wear behaviour of the composites was also discussed. The results show that the composite with an appropriate mass friction of SiO2 nanoparticles up to 5 wt% exhibited a homogeneous microstructure. Meanwhile, the friction coefficient was raised to 0.23 with a wear volume reduced to 7.3 × 10− 5 mm3, and the predominant wear mechanism changed from adhesive wear to abrasive wear, due to its enhancement of the densification level and the Vickers micro-hardness.
previous article Effect of Retained Austenite on White Etching Crack Behavior of Carburized AISI 8620 Steel Under Boundary Lubrication
next article Antiwear Properties of Binary Ashless Blend of Phosphonium Ionic Liquids and Borate Esters in Partially Formulated Oil (No Zn)

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Hu, J.B., Wei, C., Li, X.Y.: A uniform cross-speed model of end-face seal ring with spiral grooves for wet clutch. Tribol. Int. 62, 8–17 (2013)CrossRef
2.
Yang, Y., Lam, R.C.: Theoretical and experimental studies on the interface phenomena during the engagement of automatic transmission clutch. Tribol. Lett 5(1), 57–67 (1998)CrossRef
3.
Banquy, X., Lowrey, D.D., Belman, N., Min, Y., Mordukhovich, G., Israelachvili, J.N.: Measurement and characterization of “resonance friction” at high sliding speeds in a model automotive wet clutch. Tribol. Lett. 43(2), 185–195 (2011)CrossRef
4.
Li, M., Khonsari, M.M., McCarthy, D.M., Lundin, J.: On the wear prediction of the paper-based friction material in a wet clutch. Wear 334–335, 56–66 (2015)CrossRef
5.
Marklund, P., Maki, R., Larsson, R., Hoglund, E., Khonsari, M.M., Jang, J.: Thermal influence on torque transfer of wet clutches in limited slip differential applications. Tribol. Int. 40, 876–884 (2007)CrossRef
6.
Li, S., Di, Z., Cheng, L., Liu, Z., Piao, J., Huang, D., Zhao, Z., Cui, H., Li, Y.: Surface chemical characterization of steel clutch plate in ATF. Tribol. Int. 102, 319–325 (2016)CrossRef
7.
Zou, Q., Rao, C., Barber, G., Zhou, B., Wang, Y.: Investigation of surface characteristics and tribological behavior of clutch plate materials. Wear 302, 1378–1383 (2013)CrossRef
8.
Li, W., Huang, J., Fei, J., Cao, L., Yao, C.: Simulation of the engagement of carbon fabric wet clutch: analytical and experimental comparison. Tribol. Int. 90, 502–508 (2015)CrossRef
9.
Zhao, E.H., Ma, B., Li, H.Y.: Wear and lubrication behaviors of Cu-Based friction pairs with asperity contacts: numerical and experimental studies. Tribol. Lett. 65(2), 69 (2017)CrossRef
10.
Li, W., Huang, J., Fei, J., Cao, L., Yao, C.: Study on tribological properties as a function of operating conditions for carbon fabric wet clutch. Tribol. Int. 94, 428–436 (2016)CrossRef
11.
Bernhardt, J., Albers, A., Ott, S.: Advanced ceramics as friction material in lubricated clutch systems. Tribol. Int. 59, 267–272 (2013)CrossRef
12.
Gong, T., Yao, P., Xiao, Y., Fan, K., Tan, H., Zhang, Z., Zhao, L., Zhou, H., Deng M.W: Wear map for a copper-based friction clutch material under oil lubrication. Wear 328–329, 270–276 (2015)CrossRef
13.
Su, Y., Zhang, Y., Song, J., Hu, L.: Tribological behavior and lubrication mechanism of self-lubricating ceramic/metal composites: the effect of matrix type on the friction and wear properties. Wear 372–373, 130–138 (2017)CrossRef
14.
Ma, W., Lu, J.: Effect of sliding speed on surface modification and tribological behavior of copper–graphite composite. Tribol. Lett. 41, 363–370 (2011)CrossRef
15.
Xiong, X., Chen, J., Yao, P.P., Li, S., Huang, B.: Friction and wear behaviors and mechanisms of Fe and SiO2 in Cu-based P/M friction materials. Wear 262, 1182–1186 (2007)CrossRef
16.
Pena-Paras, L., Gao, H., Maldonado-Cortes, D., Vellore, A., García-Pineda, P., Montemayor, O.E., Nava, K.L., Martini, A.: Effects of substrate surface roughness and nano/micro particle additive size on friction and wear in lubricated sliding. Tribol. Int. 119, 88–98 (2018)CrossRef
17.
Rajkumar, K., Aravindan, S.: Tribological performance of microwave-heat-treated copper–graphite composites. Tribol. Lett. 37, 131–139 (2010)CrossRef
18.
Li, M., Khonsari, M.M., McCarthy, D.M., Lundin, J.: Parametric analysis for a paper-based wet clutch with groove consideration. Tribol. Lett. 80, 222–233 (2014)CrossRef
19.
Li, M., Khonsari, M.M., McCarthy, D.M., Lundin, J.: Parametric analysis of wear factors of a wet clutch friction material with different groove patterns. Proc. Inst. Mech. Eng.. 231(8), 1056–1067 (2017)CrossRef
20.
Reddy, M.P., Ubaid, F., Shakoor, R.A., Parande, G., Manakari, V., Mohamed, A.M.A., Gupta, M.: Effect of reinforcement concentration on the properties of hot extruded Al-Al2O3 composites synthesized through microwave sintering process. Mater. Sci. Eng. A 696, 60–69 (2017)CrossRef
21.
Sun, C., Song, M., Wang, Z., Chao, Y.H.: Effect of particle size on the microstructures and mechanical properties of SiC-reinforced pure aluminum composites. J. Mater. Eng. Perfor. 20(9), 1606–1612 (2011)CrossRef
22.
Kumaraguru, S., Kumar, G., Shanmugan, S., Mohan, S., Gnanamuthu, R.M.: Enhanced texture and microhardness of the nickel surface using Bi2O3 particles via electrodeposition technique for engineering application. J. Alloy. Compd. 753, 740–747 (2018)CrossRef
23.
Jayalakshmi, S., Sankaranarayanan, S., Gupta, M.: Processing and properties of aluminum and magnesium based composites containing amorphous reinforcement: a review. Metals 5(2), 743–762 (2015)CrossRef
24.
Zhan, Y., Zhang, G.: Friction and wear behavior of copper matrix composites reinforced with SiC and graphite particles. Tribol. Lett. 17(1), 91–98 (2004)CrossRef
25.
Avcu, E.: The influences of ECAP on the dry sliding wear behavior of AA7075 aluminum alloy. Tribol. Int. 110, 173–184 (2017)CrossRef
26.
Purcek, G., Yanar, H., Shangina, D.V., Demirtas, M., Bochvar, N.R., Dobatkin, S.V.: Influence of high pressure torsion-induced grain refinement and subsequent aging on tribological properties of Cu-Cr-Zr alloy. J. Alloy. Compd. 742, 325–333 (2018)CrossRef
27.
Pola, A., Montesano, L., Gelfi, M., La Vecchia, G.M.: Comparison of the sliding wear of a novel Zn alloy with that of two commercial Zn alloys against bearing steel and leaded brass. Wear 368–369, 445–452 (2016)CrossRef
28.
Su, L., Gao, F., Han, X., Fu, R., Zhang, E.: Tribological behavior of copper–graphite powder third body on copper-based friction materials. Tribol. Lett. 60(2), 1–12 (2015)CrossRef
29.
Purcek, G., Yanar, H., Saray, O., Karaman, I., Maier, H.J.: Effect of precipitation on mechanical and wear properties of ultrafine-grained Cu–Cr–Zr alloy. Wear 311, 149–158 (2014)CrossRef
Metadata
Title
Densification Behaviour and Wear Performance of Brass-Based Composite Reinforced with SiO2 Nanoparticles: Switchable Water Pump Clutch Application
Authors
Nianlian Li
Vanessa Bouchart
Pierre Chevrier
Hongyan Ding
Publication date
01-06-2019
Publisher
Springer US
Published in
Tribology Letters / Issue 2/2019
Print ISSN: 1023-8883
Electronic ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-019-1154-y

Other articles of this Issue 2/2019

Tribology Letters 2/2019 Go to the issue

Original Paper

Strain Hardening and Strain-Rate Effect in Friction Between Projectile and Barrel During Engraving Process

Original Paper

Anisotropy in Nanoscale Friction and Wear of Precipitate Containing AZ91 Magnesium Alloy

Original Paper

Effect of Graphene Nanoplates Dispersed in Ethanol on Frictional Behaviour of Tool Steel Running Against Uncoated and DLC-Coated Tool Steel

Original Paper

How Sliding and Hydrodynamics Contribute to Articular Cartilage Fluid and Lubrication Recovery

Original Paper

Synergistic Effects Between the Two Choline-Based Ionic Liquids as Lubricant Additives in Glycerol Aqueous Solution

Original Paper

Role of Orientation of Graphite Fabric in Polyetherimide Composite with Respect to Loading Direction on the Wear Performance in Various Wear Modes

Premium Partners

    Image Credits