Top

Metallurgical and Materials Transactions A

Published in:

22-08-2019 | Communication

Dependency of Natural Aging on the Ferritfoe Grain Size in Dual-Phase Steel

Authors: Mehran Zamani, Hamed Mirzadeh, Hamid M. Ghasemi

Published in: Metallurgical and Materials Transactions A | Issue 11/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Ferrite grain refinement of a ferritic–martensitic dual-phase (DP) steel was found to be quite effective in enhancement of tensile properties, work-hardening behavior, and quench aging (natural aging) phenomenon. The precipitation strengthening effect of fine carbides was rationalized based on the Ashby–Orowan and Hall–Petch relationships.

previous article In Situ Observation of Martensite Lath Growth Behaviors in the Coarse Grained Heat-Affected Zone of 1.25Cr-0.5Mo Heat-Resistant Steel During Simulated Welding

next article Observation of a[100] Dislocations in the γ′ Phase in a [011]-Oriented Nickel-Base Single Crystal Superalloy During High Temperature Creep

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock, Materials Science and Engineering A, 2006, vol. 441, pp. 1-17.CrossRef

[2] T.M. Belgasam, H.M. Zbib, Metal. Mater. Trans. A, 2018, vol. 49, pp. 2419-2440.CrossRef

[3] T. Furuhara, K. Kikumoto, H. Saito, T. Sekine, T. Ogawa, S. Morito, and T. Maki: ISIJ International, 2008, vol. 48, pp. 1038-1045.CrossRef

[4] R. Ueji, N. Tsuji, Y. Minamino, and Y. Koizumi: Acta Materialia, 2002, vol. 50, pp. 4177-4189.CrossRef

[5] S. Nikkhah, H. Mirzadeh, and M. Zamani, Materials Chemistry and Physics, 2019, vol. 230, pp. 1-8.CrossRef

[6] M. Mazinani, W.J. Poole, Metal. Mater. Trans. A, 2007, vol. 38, pp. 328-339.CrossRef

[7] S. Sodjit and V. Uthaisangsuk: Materials and Design, 2012, vol. 41, pp. 370-379.CrossRef

[8] H. Ashrafi, M. Shamanian, R. Emadi, N. Saeidi: Materials Chemistry and Physics, 2017, vol. 187, pp. 203-217.CrossRef

[9] S. Nikkhah, H. Mirzadeh, M. Zamani, Materials Science and Engineering A, 2019, vol. 756, pp. 268-271.CrossRef

10.

[10] N. Nakada, Y. Arakawa, K.S. Park, T. Tsuchiyama, and S. Takaki: Materials Science and Engineering A, 2012, vol. 553, pp. 128-133.CrossRef

11.

[11] H. Azizi-Alizamini, M. Militzer, and W.J. Poole: ISIJ International, 2011, vol. 51, pp. 958-964.CrossRef

12.

[12] M. Nouroozi, H. Mirzadeh, and M. Zamani: Materials Science and Engineering A, 2018, vol. 736, pp. 22-26.CrossRef

13.

[13] A. Ramazani, S. Bruehl, M. Abbasi, W. Bleck, and U. Prahl: Steel Research International, 2016, vol. 87, pp. 1559-1565.CrossRef

14.

[14] A. Chakraborty, M. Adhikary, T. Venugopalan, V. Singh, T. Nanda, and B. Ravi Kumar: Materials Science and Engineering A, 2016, vol. 676, pp. 463-473.CrossRef

15.

[15] N. Ormsuptave and V. Uthaisangsuk: Steel Research International, 2017, vol. 88, p. 1600150.CrossRef

16.

[16] C. Kuang, S. Zhang, J. Li, J. Wang, and H. Liu: International Journal of Minerals, Metallurgy and Materials, 2014, vol. 21, pp. 766-771.CrossRef

17.

[17] T. Waterschoot, A.K. De, S. Vanderputte, and B.C. De Cooman: Metal. Mater. Trans. A, 2003, vol. 34, pp. 781-791.CrossRef

18.

[18] S. Gunduz: Materials Science and Engineering A, 2008, vol. 486, pp. 63-71.CrossRef

19.

[19] P.H. Chang: Metallurgical Transaction A, 1983, vol. 15, pp. 73-86.CrossRef

20.

[20] M. Zamani, H. Mirzadeh, and M. Maleki: Materials Science and Engineering A, 2018, vol. 734, pp. 178-183.CrossRef

21.

[21] F. Jamei, H. Mirzadeh, and M. Zamani, Materials Science and Engineering A, 2019, vol. 750, pp. 125-131.CrossRef

22.

[22] F. Najafkhani, H. Mirzadeh, and M. Zamani, Metals and Materials International, 2019, vol. 25, pp. 1039-1046.CrossRef

23.

[23] E.O. Hall: Yield Point Phenomena in Metals and Alloys, Plenum Press, New York, 1970.CrossRef

24.

[24] M. Maleki, H. Mirzadeh, and M. Zamani, Journal of Materials Engineering and Performance, 2019, vol. 28, pp. 2178-2183.CrossRef

25.

[25] Y.I. Son, Y.K. Lee, K.T. Park, C.S. Lee, and D.H. Shin: Acta Materialia, 2005, vol. 53, pp. 3125-3134.CrossRef

26.

[26] H. Seyedrezai, A.K. Pilkey, and J.D. Boyd: Canadian Metallurgical Quarterly, 2018, vol. 57, pp. 28-37.CrossRef

27.

[27] N. K. Balliger and T. Gladman: Metal Science, 1981, vol. 15, pp. 95-108.CrossRef

28.

[28] H. Mirzadeh, M. Alibeyki, and M. Najafi: Metal. Mater. Trans. A, 2017, vol. 48, pp. 4565-4573.CrossRef

29.

[29] W.C. Leslie: Acta Metallurgica, 1961, vol. 9, pp. 1004-1022.CrossRef

30.

[30] R. Song, D. Ponge, and D. Raabe, Scripta Materialia, 2005, vol. 52, pp. 1075-1080.CrossRef

31.

[31] T. Gladman: Materials Science and Technology, 1999, vol. 15, pp. 30-36.CrossRef

Title: Dependency of Natural Aging on the Ferritfoe Grain Size in Dual-Phase Steel
Authors: Mehran Zamani
Hamed Mirzadeh
Hamid M. Ghasemi
Publication date: 22-08-2019
Publisher: Springer US
Published in: Metallurgical and Materials Transactions A / Issue 11/2019
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-019-05414-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11/2019

Interfacial Segregation of Alloying Elements During Dissimilar Ultrasonic Welding of AA6111 Aluminum and Ti6Al4V Titanium

Influence of Cr Content on the Microstructure and Electrochemical Corrosion in Plasma Cladding Ni-Cr Coatings

In Situ Observation of Martensite Lath Growth Behaviors in the Coarse Grained Heat-Affected Zone of 1.25Cr-0.5Mo Heat-Resistant Steel During Simulated Welding

Microstructure, Wetting, and Tensile Behaviors of Sn-Ag Alloy Reinforced with Copper-Coated Carbon Nanofibers Produced by the Melting and Casting Route

The Effect of Die Bearing Geometry on Surface Recrystallization During Extrusion of an Al-Mg-Si-Mn Alloy

Effect of Precipitation Control on Strength and Impact Toughness in Advanced Pressure Vessel Steel

Premium Partners