Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Polymer Bulletin
Published in: Polymer Bulletin 4/2021

28-04-2020 | Original Paper

Design and preparation of UV-curable waterborne polyurethane based on novel fluorinated chain extender

Authors: Changli Shan, Chuang Ning, Jingjie Lou, Wei Xu, Yingqiang Zhang

Published in: Polymer Bulletin | Issue 4/2021

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

A series of UV-curable waterborne fluorinated polyurethane (UV-WFPU) were prepared successfully based on novel fluorinated side chain extender (F-TMP). The structure of F-TMP and particle size of UV-WFPU dispersions, contact angle (CA) and surface free energy, morphology, and damping property of UV-WFPU films were characterized through Fourier transform infrared spectroscopy, nanoparticle size analysis, contact angle test, scanning electron microscope and dynamic mechanical analysis (DMA), respectively. The results indicated that UV-WFPU dispersions had a particle size between 49.01 and 61.52 nm. The latex particle size and tan δ value of UV-WFPU films increased with the increase in F-TMP contents. The studies of surface properties confirmed that UV-WFPU films based on F-TMP had outstanding hydrophobicity properties. The highest CA of water and lowest surface free energy of UV-WFPU films reached 96.2° and 21.17 mJ/m2, respectively. Meanwhile, the DMA results showed UV-WFPU films possessed great damping property which had the broad temperature range enhanced by F-TMP, with a maximum value at 190.4 °C. The results of mechanical properties showed that the addition of fluorine increased in the tensile strength of the film. And these films have potential application values in the technical fields of damping, anti-corrosion and dust prevention.
previous article Mesoporous silica MCM-41-reinforced cardanol-based benzoxazine nanocomposites for low-k applications
next article Study of alkyl acrylate-co-maleic anhydride-based novel amide copolymers as multifunctional lubricant additives

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Li Y, Yang Z, Qiu H, Dai Y, Zheng Q, Li J, Yang J (2014) Self-aligned graphene as anticorrosive barrier in waterborne polyurethane composite coatings. J Mater Chem A 2(34):14139–14145CrossRef
2.
Bao L, Fan H, Chen Y, Yan J, Yang T, Guo Y (2016) Effect of surface free energy and wettability on the adhesion property of waterborne polyurethane adhesive. RSC Adv 6(101):99346–99352CrossRef
3.
Garcia-Pacios V, Costa V, Colera M, Miguel Martin-Martinez J (2011) Waterborne polyurethane dispersions obtained with polycarbonate of hexanediol intended for use as coatings. Prog Org Coat 71(2):136–146CrossRef
4.
Fu C, Zheng Z, Yang Z, Chen Y, Shen L (2014) A fully bio-based waterborne polyurethane dispersion from vegetable oils: from synthesis of precursors by thiol-ene reaction to study of final material. Prog Org Coat 77(1):53–60CrossRef
5.
Mao H, Qiang S, Xu Y, Wang C (2017) Synthesis of polymeric dyes based on UV curable multifunctional waterborne polyurethane for textile coating. New J Chem 41(2):619–627CrossRef
6.
Baradie B, Shoichet MS (2005) Novel fluoro-terpolymers for coatings applications. Macromolecules 38(13):5560–5568CrossRef
7.
Park IJ, Lee SB, Choi CK (1998) Surface properties of the fluorine-containing graft copolymer of poly((perfluoroalkyl)ethyl methacrylate)-G-poly(methyl methacrylate). Macromolecules 31(21):7555–7558CrossRef
8.
Signori F, Lazzari M, Castelvetro V, Chiantore O (2006) Copolymers of isopropenyl alkyl ethers with fluorinated acrylates and fluoroacrylates: influence of fluorine on their thermal, photochemical, and hydrolytic stability. Macromolecules 39(5):1749–1758CrossRef
9.
Valade D, Boyer C, Ameduri B, Boutevin B (2006) Poly(vinylidene fluoride)-B-poly(styrene) block copolymers by iodine transfer polymerization (ITP): synthesis, characterization, and kinetics of ITP. Macromolecules 39(25):8639–8651CrossRef
10.
Yi L, Meng X, Tian X, Zhou W, Chen R (2014) Wettability of electrospun films of microphase-separated block copolymers with 3,3,3-trifluoropropyl substituted siloxane segments. J Phys Chem C 118(46):26671–26682CrossRef
11.
Shuaishuai Huang S, Liu G, Hu H (2018) Water-based anti-smudge NP-GLIDE polyurethane coatings. Chem Eng J 351:210–220CrossRef
12.
Rabnawaz M, Liu G (2015) Graft-copolymer-based approach to clear, durable, and anti-smudge polyurethane coatings. Angew Chem Int Ed 54(22):6516–6520CrossRef
13.
Rabnawaz M, Liu G, Hu H (2015) Fluorine-free anti-smudge polyurethane coatings. Angew Chem Int Ed 54(43):12722–12727CrossRef
14.
Wen J, Sun Z, Xiang J, Fan H, Chen Y, Yan J (2019) Preparation and characteristics of waterborne polyurethane with various lengths of fluorinated side chains. Appl Surf Sci 494:610–618CrossRef
15.
Zhao J, Zhou T, Zhang J, Chen H, Yuan C, Zhang W, Zhang A (2014) Synthesis of a waterborne polyurethane-fluorinated emulsion and its hydrophobic properties of coating films. Ind Eng Chem Res 53(49):19257–19264CrossRef
16.
Yu LZ, Wang YY, Qiu FX, Xu JC, Xu BB, Jiang Y, Yang DY, Li PL (2013) Preparation, characterisation and properties of waterborne fluorinated polyurethane acrylate/SiO2 hybrid. Plast, Rubber Compos 42(9):385–392CrossRef
17.
Zhang FA, Yu CL (2007) Application of a silicone-modified acrylic emulsion in two-component waterborne polyurethane coatings. J Coat Technol Res 4(3):289–294CrossRef
18.
Turri S, Levi M, Trombetta T (2004) Waterborne anionomeric polyurethane-ureas from functionalized fluorovolvethers. J Appl Polym Sci 93(1):136–144CrossRef
19.
Tonelli C, Ajroldi G (2003) New fluoro-modified thermoplastic polyurethanes. J Appl Polym Sci 87(14):2279–2294CrossRef
20.
Turri S, Levi M, Trombetta T (2004) Process design of fluorinated polyurethane-urea anionomer aqueous dispersions. Macromol Symp 218:29–38
21.
Kim YS, Lee JS, Ji Q, McGrath JE (2002) Surface properties of fluorinated oxetane polyol modified polyurethane block copolymers. Polymer 43(25):7161–7170CrossRef
22.
Jiang M, Zhao XL, Ding XB, Zheng ZH, Peng YX (2005) A novel approach to fluorinated polyurethane by macromonomer copolymerization. Eur Polym J 41(8):1798–1803CrossRef
23.
Li GH, Li XR, Shen YD, Ren QH (2006) Effect of hydrophilic monomer on the surface properties of cationic polyurethane-fluorinated acrylate hybrid dispersions. J Appl Polym Sci 99(5):2721–2725CrossRef
24.
Jiang W, Huang Y, Gu GT, Meng W, Qing F (2006) A novel waterborne polyurethane containing short fluoroalkyl chains: synthesis, characterization and its application on cotton fabrics surface. Appl Surf Sci 253(4):2304–2309CrossRef
25.
Song M, Hourston DJ, Schafer FU (2001) Correlation between mechanical damping and interphase content in interpenetrating polymer networks. J Appl Polym Sci 81(10):2439–2442CrossRef
26.
Huang GS, Li Q, Jiang LX (2002) Structure and damping properties of polydimethylsiloxane and polymethacrylate sequential interpenetrating polymer networks. J Appl Polym Sci 85(3):545–551CrossRef
27.
Trakulsujaritchok T, Hourston DJ (2006) Damping characteristics and mechanical properties of silica filled PUR/PEMA simultaneous interpenetrating polymer networks. Eur Polym J 42(11):2968–2976CrossRef
28.
Guo X, Cheng Q, Yu G, Wang H, Tian Z, Shi Z, Cui Z, Zhu S (2020) The functions of hydrophobic elastic polyurethane combined with an antibacterial triclosan derivative in the dentin restoration interface. J. Mech Behav Biomed 102:103471CrossRef
29.
Zhang L, Li H, Lai X, Wu W, Zeng X (2018) Hindered phenol functionalized graphene oxide for natural rubber. Mater Lett 210:239–242CrossRef
30.
Nguyen LT, Hillewaere XKD, Teixeira RFA, van den Berg O, Du Prez FE (2015) Efficient microencapsulation of a liquid isocyanate with in situ shell functionalization. Polym Chem-Uk 6(7):1159–1170CrossRef
31.
Yang W, Cheng X, Wang H, Liu Y, Du Z (2017) Surface and mechanical properties of waterborne polyurethane films reinforced by hydroxyl-terminated poly(fluoroalkyl methacrylates). Polymer 133:68–77CrossRef
32.
Fu H, Yan C, Zhou W, Huang H (2014) Nano-SiO2/fluorinated waterborne polyurethane nanocomposite adhesive for laminated films. J Ind Eng Chem 20(4):1623–1632CrossRef
33.
34.
Xu W, An Q, Hao L, Zhang D, Zhang M (2013) Synthesis and characterization of self-crosslinking fluorinated polyacrylate soap-free latices with core-shell structure. Appl Surf Sci 268:373–380CrossRef
35.
Xu W, An Q, Hao L, Huang L (2012) Synthesis, film morphology, and performance of cationic fluorinated polyacrylate emulsion with core-shell structure. J Appl Polym Sci 125(3):2376–2383CrossRef
36.
Shi Y, Yan H, Wen R, Wan L (2017) Direct visualization of nucleation and growth processes of solid electrolyte interphase film using in situ atomic force microscopy. ACS Appl Mater Interfaces 9(26):22063–22067PubMedCrossRef
37.
Wang Q, Aubry C, Chen Y, Song H, Zou L (2017) Insights on tuning the nanostructure of rGO laminate membranes for low pressure osmosis process. ACS Appl Mater Interfaces 9(27):22509–22517PubMedCrossRef
38.
Hao L, An Q, Xu W, Huang L (2012) Synthesis, film morphology and hydrophobicity of novel fluorinated polyacrylate emulsion and solution on silicon wafer. Colloid Surf A 396:83–89CrossRef
39.
Xu W, Zhao W, Hao L, Wang S, Pei M, Wang X (2018) Synthesis and characterization of novel fluoroalkyl-terminated hyperbranched polyurethane latex. Appl Surf Sci 436:1104–1112CrossRef
40.
Shi X, Shi H, Wu H, Shen H, Cao P (2018) Synthesis and properties of novel fluorinated polyurethane based on fluorinated gemini diol. Polym Adv Technol 29(7):1939–1952CrossRef
41.
Urayama K, Miki T, Takigawa T, Kohjiya S (2004) Damping elastomer based on model irregular networks of end-linked poly(dimethylsiloxane). Chem Mater 16(1):173–178CrossRef
42.
Zhu J, Zhao X, Liu L, Song M, Wu S (2018) Quantitative relationships between intermolecular interaction and damping parameters of irganox-1035/NBR hybrids: a combination of experiments, molecular dynamics simulations, and linear regression analyses. J Appl Polym Sci 135(17):46202CrossRef
43.
Deng YJ, Zhou C, Zhang MY, Zhang HX (2018) Effects of the reagent ratio on the properties of waterborne polyurethanes-acrylate for application in damping coating. Prog Org Coat 122:239–247CrossRef
44.
Shi G, Yin X, Wu G (2018) Thermodynamic phase analysis of acrylic polymer/hindered phenol hybrids: effects of hydrogen bonding strength. Polymer 153:317–324CrossRef
Metadata
Title
Design and preparation of UV-curable waterborne polyurethane based on novel fluorinated chain extender
Authors
Changli Shan
Chuang Ning
Jingjie Lou
Wei Xu
Yingqiang Zhang
Publication date
28-04-2020
Publisher
Springer Berlin Heidelberg
Published in
Polymer Bulletin / Issue 4/2021
Print ISSN: 0170-0839
Electronic ISSN: 1436-2449
DOI
https://doi.org/10.1007/s00289-020-03202-7

Other articles of this Issue 4/2021

Polymer Bulletin 4/2021 Go to the issue

Original Paper

Effect of thickness and starch phthalate/starch content on the degradability of LDPE/silane-modified nanosilica films: a comparative parametric optimization

Original Paper

Preparation of submicron capsules containing fragrance and their application as emulsifier

Original Paper

Study of alkyl acrylate-co-maleic anhydride-based novel amide copolymers as multifunctional lubricant additives

Original Paper

Impact of lithium triflate (LiCF3SO3) salt on tamarind seed polysaccharide-based natural solid polymer electrolyte for application in electrochemical device

Original Paper

Nonzero coercivity of Fe3O4/polyvinyl alcohol nanocomposites synthesized by different polymer-assisted co-precipitation processes

Original Paper

New poly(urethane-urea) microcapsules from PVA modified with APTES: preparation, characterization and enzyme encapsulation

Premium Partners

    Image Credits