Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Engineering with Computers
Published in: Engineering with Computers 3/2013

01-07-2013 | Original Article

Design curve determination for two-layered wire rope strand using p-version finite element code

Authors: Róbert Beleznai, István Páczelt

Published in: Engineering with Computers | Issue 3/2013

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Parametric analysis of a two-layered axially loaded strand is performed using the recently developed p-version finite element code, which describes the geometry well and takes into account all possible inter-wire motions and frictional contact between the wires. A special nonlinear contact theory was developed based on the Hertz-theory. It is assumed that the wires have homogenous, isotropic, linear elastic material properties. The developed code is a tool for designing wire rope strands that require low computer resources and short computational time. Case studies are performed to verify and demonstrate the efficiency and applicability of the method. Design curves are presented according to the strand geometry parameters such as helix angle and ratio of the wire radius in the different layers. The optimal geometry parameters for a given strand can be determined using these design curves.
previous article Modelling and simulation of a new worm gear drive having point-like contact
next article Multi-objective topology optimization through GA-based hybridization of partial solutions

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Bárkóczi I (1996) Sodronykötél-kézikönyv, FUX Rt, Miskolc (in Hungarian)
2.
3.
Costello GA (1983) Stresses in multilayered cables. J Energy Res Technol 105:337–340CrossRef
4.
Elata D, Eshkenazy R, Weiss MP (2004) The mechanical behavior of a wire rope with an independent wire rope core. Int J Solids Struct 41:1157–1172CrossRef
5.
Giglio M, Manes A (2005) Life prediction of a wire rope subjected to axial and bending loads. Eng Fail Anal 12:549–568CrossRef
6.
Jiang WG, Henshall JL (1999) The analysis of termination effects in wire strand using the finite element method. J Strain Anal 34(1):31–38CrossRef
7.
Jiang WG, Yao MS, Walton JM (1999) A concise finite element model for simple straight wire rope strand. Int J Mech Sci 41:143–161MATHCrossRef
8.
Jiang WG, Henshall JL, Walton JM (2000) A concise finite element model for three-layered straight wire rope strand. Int J Mech Sci 42:63–86MATHCrossRef
9.
Wen-Guang Jiang, Warby Michael K, Henshall John L (2008) Statically indeterminate contacts in axially loaded wire strand. Eur J Mech A/Solids 27(1):69–78CrossRef
10.
Kumar K, Botsis J (2001) Contact stresses in multilayered strands under tension and torsion. Trans ASME J Appl Mech 68:432–440CrossRef
11.
Lanteigne J (1985) Theoretical estimation of the response of helically armored cables to tension, torsion and bending. J Appl Mech 52:423–432CrossRef
12.
LeClair RA, Costello GA (1986) Axial bending and torsional loading of a strand with friction. Proceedings of the Fifth International OMAE Symposium, Tokyo, Japan, ASME, vol III: 550–555
13.
Beleznai R, Páczelt I (2010) Development of contact-theory for analysis of wire rope strand using p-version finite element method. Proceedings of TMCE 2010 Symposium, Ancona, Italy, pp 789–801
14.
Phillips JW, Costello GA (1985) Analysis of wire ropes with internal-wire-rope cores. Trans ASME 52:510–516CrossRef
15.
Johanson KL (1985) Contact mechanics. Cambridge University Press, CambridgeCrossRef
16.
Prakash A, Conway Ted A, Costello GA (1992) Compression of a Cord. Trans ASME 59:S213–S216CrossRef
17.
Raoof M, Kraincanic I (1998) Determination of wire recovery length in steel cables and its practical applications. Comput Struct 68:445–459CrossRef
18.
Szabó B, Babuska I (1991) Finite element analysis. Wiley-Interscience, New YorkMATH
19.
Taktak M, Dammak F, Abid S, Haddar M (2005) A mixed-hybrid finite element for three-dimensional isotropic helical beam analysis. Int J Mech Sci 47:209–229MATHCrossRef
20.
Velinsky SA (1985) General nonlinear theory for complex wire ropes. Int J Mech Sci 27:497–507CrossRef
21.
Wriggers P (2002) Computational contact mechanics. J Wiley & Sons, New York
22.
Zhang DK, Ge SR, Qiang YH (2003) Research on the fatigue and fracture behavior due to the fretting wear of steel wire in hoisting rope. Wear 255:1233–1237CrossRef
23.
Ghoreishi SR, Messager T, Cartraud P, Davies P (2007) Validity and limitations of linear analytical models for steel wire strands under axial loading, using a 3D FE model. Int J Mech Sci 49:1251–1261CrossRef
24.
Páczelt I, Mróz Z (2009) On the analysis of steady state sliding wear processes. Tribol Int 42:275–283CrossRef
25.
Utting WS, Jones N (1987) The response of wire rope strands to axial tensile loads—part I. Experimental results and theoretical predictions. Int J Mech Sci 29(9):605–619CrossRef
26.
Utting WS, Jones N (1987) The response of wire rope strands to axial tensile loads—part II. Comparison of experimental results and theoretical predictions. Int J Mech Sci 29(9):621–636CrossRef
Metadata
Title
Design curve determination for two-layered wire rope strand using p-version finite element code
Authors
Róbert Beleznai
István Páczelt
Publication date
01-07-2013
Publisher
Springer-Verlag
Published in
Engineering with Computers / Issue 3/2013
Print ISSN: 0177-0667
Electronic ISSN: 1435-5663
DOI
https://doi.org/10.1007/s00366-012-0269-7

Other articles of this Issue 3/2013

Engineering with Computers 3/2013 Go to the issue

Original Article

A virtual reality approach for usability assessment: case study on a wheelchair-mounted robot manipulator

Original Article

Modelling and simulation of a new worm gear drive having point-like contact

Original Article

Computer-aided engineering for sheet metal forming: definition of a springback quality function

Original Article

A comparison of simplex and simulated annealing for optimization of a new rear underrun protective device

Original Article

Integrated metal forming and vibration analysis of sheet metal parts

Original Article

Design of computer experiments applied to modeling of compliant mechanisms for real-time control