Top

Measurement Techniques

Published in:

14-08-2019 | PHYSICOCHEMICAL MEASUREMENTS

Determination of Rare-Earth Metals in Magnesium Alloys by Atomic Emission Spectrometry with Inductively Coupled Plasma

Authors: R. M. Dvoretskov, V. B. Baranovskaya, F. N. Karachevtsev, A. F. Letov

Published in: Measurement Techniques | Issue 4/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

An analysis technique for the determination of rare-earth metals Ce, Er, Gd, La, Nd, Y in magnesium alloys by the method of atomic emission spectrometry with inductively coupled plasma is proposed. Analytical lines of elements free of significant spectral overlays and the internal standard line were chosen. The metrological characteristics of the technique were studied using model solutions and its accuracy was verified using standard samples of magnesium alloys containing rare-earth metals.

previous article A Study of the Temperature Distribution in a Polymer-Composite Rod When Heat-Treated with Microwave Radiation

next article Investigation of Sorption Coatings of Piezoquartz Resonators to Develop Devices for Monitoring Organic Impurities in Gases

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

E. N. Kablov, “Materials and chemical technologies for aeronautical engineering,” Vest. RAN, 82, No 6, 520–530 (2012).

N. V. Trofimov, A. A. Leonov, V. A. Duyunova, and Z. P. Uridiya, “Casting magnesium alloys (a review),” Trudy VIAM: Elektron. Nauch.-Tekhn. Zh., 12, No. 48, 3–12 (2016), DOI: https://doi.org/10.18577/2307-6046-2016-0-12-1-1.

I. Yu. Mukhina, Z. P. Uridia, and N. V. Trofi mov, “Corrosion-resistant casting magnesium alloys,” Aviats. Mater. Tekhnol., 2, No. 47, 15–23 (2017).

E. F. Volkova, M. V. Akinina, and I. V. Mostyaev, “Ways of improving the basic mechanical characteristics of deformable magnesium alloys,” Trudy VIAM: Elektron. Nauch.-Tekhn. Zh., 10, No. 58, 15–23 (2017), DOI: https://doi.org/10.18577/2307-6046-2017-0-10-2-2.

E. N. Kablov, O. G. Ospennikova, and A. V. Vershkov, “Rare metals and rare earth elements –modern and future high-tech materials,” Aviats. Mater. Tekhnol., No. S2, 3–10 (2013).

I. V. Mostiayev, “REM – a factor in the qualitative improvement of properties of magnesium alloys (a review),” Trudy VIAM: Elektron. Nauch.-Tekhn. Zh., No. 7, Art. 2 (2015), DOI: https://doi.org/10.18577/2307-6046-2015-0-7-2-2.

A. V. Frolov, I. Yu. Mukhina, V. A. Duyunova, and Z. P. Uridiya, “Influence of alloying elements and structural factors on the heat resistance of magnesium alloys,” Trudy VIAM: Elektron. Nauch.-Tekhn. Zh., No. 9, Art. 7 (2015), DOI: https://doi.org/10.18577/2307-6046-2015-0-9-7-7.

Yu. A. Karpov and V. B. Baranovskaya, “Analytical control – an integral part of material diagnostics,” Zavod. Lab. Diagn. Mater., 83, No. 1, Pt. I, 5–12 (2017).

V. G. Garanin, “The application of the spectrometer Grand-Epert to determine the composition of metals and alloys based on magnesium, titanium and aluminum,” Zavod. Lab. Diagn. Mater., 81, No 1, Pt. 2, 79–88 (2015).

10.

E. S. Koshel, V. B. Baranovskaya, and T. Yu. Gubanova, “Direct arc atomic emission analysis of yttrium, gadolinium, and neodymium oxides,” Zavod. Lab. Diagn. Mater., 81, No. 12, 8–13 (2015).

11.

E. F. Volkova, I. V. Mostyaev, and V. V. Akinina, “Comparative studies of the effect of phase composition on the mechanical and technological properties of magnesium alloys MA20- SP and MA2-1,” Trudy VIAM: Elektron. Nauch.-Tekhn. Zh., 1, No. 61, 41–48 (2018), DOI: https://doi.org/10.18577/2307-6046-2018-0-1-5-5.

12.

F. Czerwinski (ed.), Magnesium Alloys – Design, Processing and Properties, InTech, Croatia (2011), pp. 353–356, DOI: https://doi.org/10.5772/560.

13.

K. U. Kainer, “Magnesium,” Magnesium Alloys and Their Applications: Proc. 6th Int. Conf., Wiley-VCH Verlag GmbH & Co. KGaA, Germany (2004), p. 987.

14.

Z. P. Uridia and I. Yu. Mukhina, “Laws of interaction of alloying elements and the formation of the nanostructured state of casting Mg alloys of the Mg–Zn–Zr system,” Trudy VIAM: Elektron. Nauch.-Tekhn. Zh., 6, No. 54, 3–12 (2017), DOI: https://doi.org/10.18577/2307-6046-2017-0-6-1-1.

15.

Yu. A. Karpov, Analytical Control of Metallurgical Production, Metallurgiya, Moscow (1995), pp. 97–107.

16.

N. Velitchkova, P. Petrova, S. Velichkov, and N. Daskalova, “Inductively coupled plasma optical emission spectrometry– determination of rare earth and platinum group of elements” Chemistry: Bulg. J. Sci. Educ., 24, No. 3, 469 (2015).

17.

RMG 61–2010, GSI. Indicators of Accuracy, Correctness, Precision of Methods for Quantitative Chemical Analysis. Evaluation Methods.

18.

E. N. Kablov, “Innovative developments of VIAM on the implementation of Strategic Directions for the Development of Materials and Technologies for Their Processing for the Period up to 2030,” Aviats. Mater. Tekhnol., 1, No. 34, 3–33 (2015).

Title: Determination of Rare-Earth Metals in Magnesium Alloys by Atomic Emission Spectrometry with Inductively Coupled Plasma
Authors: R. M. Dvoretskov
V. B. Baranovskaya
F. N. Karachevtsev
A. F. Letov
Publication date: 14-08-2019
Publisher: Springer US
Published in: Measurement Techniques / Issue 4/2019
Print ISSN: 0543-1972
Electronic ISSN: 1573-8906
DOI: https://doi.org/10.1007/s11018-019-01632-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2019

A Method of Error Correction in Arithmetic Logic Devices of Information-Measuring Systems Processors

Dependence of the Density of Entropy Production on the Rate of Changes in Temperature in the Linear Mode of Thermodynamics on the Examples of Graphite and Aluminum and Boron Nitrides

Assessment of Influence of Flow Diverter on the Metrological Characteristics of Calibration Devices Used for the Units of Mass and Unit of Volume of a Liquid in a Flow and of Mass and Volume Discharges of Liquid

Investigation of Sorption Coatings of Piezoquartz Resonators to Develop Devices for Monitoring Organic Impurities in Gases

Analysis of the Effectiveness of the Method of Qualification Tests for Satellite Communications Earth Stations

Metrological Aspects of Measuring the Volume-Average Temperature of Filaments in Illuminating Lamps