Top

Polymer Science, Series D

Published in:

01-03-2022

Determination of the Influence of the Working Environment on the Development of Underfilm Corrosion of Machine Parts with Dispersed-Filled Polymer Coatings

Authors: V. A. Gabysheva, N. I. Baurova

Published in: Polymer Science, Series D | Issue 1/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Methods for detecting underfilm corrosion, as well as the influence of working media on the rate of corrosion propagation, are considered. The results of the influence of working media on parts with organosilicon polymer surfaces modified by various disperse fillers are presented. It is shown that introduction of mica into the composition of organosilicon coating allows obtaining a protective anticorrosion coating with good adhesion to the surface of metal. The impact of working media on the water affinity of the surface of a polymer coating is described.

previous article Estimate of the Effect of Ethylene Vinyl Acetate on Technological and Deformation Properties of Silane-Based Cross-Linked Polyethylene

next article Dielectric Characteristics of Structural Organoplastics

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

V. A. Gabysheva, “Application of polymer composite materials for protection against corrosion,” Vse Mater., No. 5, 20–24 (2020).

B. B. Bobovich, G. V. Brovak, B. M. Bunakov, et al., Chemists to Car Owners, 2nd ed. (Khimiya, Leningrad, 1991) [in Russian].

A. I. Rudskoi, A. A. Popovich, and A. V. Grigor’ev, Composite Materials and Coatings (St. Petersburg, 2017) [in Russian].

V. A. Zorin, N. I. Baurova, and E. A. Kosenko, “Detection of defects in components made of dispersion-filled polymeric materials by the method of infrared thermography,” Polym. Sci., Ser. D, No. (3), 241–243 (2017).

A. P. Kartoshkin and A. N. Spiridonova, “Corrosion effect of coolants on metals during service,” Izv. S.-Peterb. Gos. Agrar. Univ., No. 57, 162–167 (2019).

M. A. Vodyanova, O. V. Ushakova, L. G. Doneryan, and I. S. Evseeva, “The problem of application and assessment of deicing agents in the conditions of megapolis,” Sovr. Probl. Nauki Obraz., No. 5, 53 (2018).

V. P. Barabanov and S. A. Bogdanova, “Colloidal-chemical aspects of interaction of surfactants with the surface of polymers,” Vest. Kazan. Tekhnol. Univ., No. 4, 7–25 (2010).

A. V. Savenkova, L. V. Chursova, O. A. Eliseev, and P. A. Glazov, “Sealants of aeronautical application,” Aviats. Mater. Tekhnol., No. 3, 40–43 (2012).

A. I. Rudskoi and N. I. Baurova, “Technological heredity during the production and operation of structural materials,” Russ. Metall. (Engl. Transl.) 2019, No. 13, 1378–1383 (2019).

10.

N. I. Baurova, “A method of imitational modeling that permits optimizing the properties of polymeric composite materials,” Polym. Sci., Ser. D 6, 265–268 (2013).

11.

N. I. Baurova, “Deflected mode simulation of adhesive joints,” Polym. Sci., Ser. D 2, 54–57 (2009).CrossRef

12.

V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Viscous hysteresis in filled siloxane binders,” Polym. Sci., Ser. D 10, 19–22 (2017).

13.

V. A. Nelyub, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Thixotropy hysteresis and structure formation in elastomeric suspensions,” Inorg. Mater.: Appl. Res. 9, 603–608 (2018).

Title: Determination of the Influence of the Working Environment on the Development of Underfilm Corrosion of Machine Parts with Dispersed-Filled Polymer Coatings
Authors: V. A. Gabysheva
N. I. Baurova
Publication date: 01-03-2022
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 1/2022
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421222010087

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2022

Binders Based on Mixtures of Epoxy Polymers and Thermoelastoplasts. Part 2. Physical and Mechanical Properties of Epoxy Polymers Modified by Polybutadieneterephtalate–Polytetramethyleneoxide Block Copolymers

The Theoretical Basis of Mechanics of Polymer Composites for FDM-Printing Technologies

Adhesion Mechanics. Estimation of Contact-Layer Parameters

Adhesive Features of Functionalized Metal–Polymer Systems Based on Polyolefins

Estimate of the Effect of Ethylene Vinyl Acetate on Technological and Deformation Properties of Silane-Based Cross-Linked Polyethylene

Comparison of Techniques for Adhesive Properties Measuring of Polymer Films Modified by Plasma

Premium Partners