Top

Rheologica Acta

Published in:

01-10-2012 | Original Contribution

Determining the true slip of a yield stress material with a sliding plate rheometer

Author: Christian Clasen

Published in: Rheologica Acta | Issue 10/2012

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Within this paper we demonstrate the capability of the sliding plate configuration of the flexure-based microgap rheometer (FMR) to absolutely determine slip velocities of a yield stress fluid. The sensitivity of the compound flexures of the FMR in combination with the possibility to achieve precise gap settings down to 1 μm allows to accurately determining slip velocities down to 1 μm/s. We further show how the obtained non-linear relation of the slip velocity to the constant stresses of the plane Couette flow in the sliding plate configuration of the FMR allows predicting and explaining the inhomogeneous stress distribution and partial yielding behaviour in a rotational cone-and-plate geometry.

previous article Measuring yield stress: a new, practical, and precise technique derived from detailed penetrometry analysis

next article Origin of the echo phenomenon upon flow reversal in low molecular weight nematic liquid crystals

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Ardakani HA, Mitsoulis E, Hatzikiriakos SG (2011) Thixotropic flow of toothpaste through extrusion dies. J Non-Newton Fluid Mech 166(21–22):1262–1271. doi:10.1016/j.jnnfm.2011.08.004 CrossRef

Baik SJ, Moldenaers P, Clasen C (2008) Determination of normal stresses in micrometer thin films. In: Co A, Leal LG, Colby RH, Giacomin AJ (eds) XVth international congress on rheology—the Society of Rheology 80th annual meeting, pts 1 and 2, vol 1027. Aip Conference Proceedings. Amer Inst Physics, Melville, pp 1165–1167

Baik SJ, Moldenaers P, Clasen C (2011) A sliding plate microgap rheometer for the simultaneous measurement of shear stress and first normal stress difference. Rev Sci Instrum 82(3):035121. doi:10.1063/1.3571297 CrossRef

Barnes HA (1995) A review of the slip (wall depletion) of polymer-solutions, emulsions and particle suspensions in viscometers—its cause, character, and cure. J Non-Newton Fluid Mech 56(3):221–251CrossRef

Bertola V, Bertrand F, Tabuteau H, Bonn D, Coussot P (2003) Wall slip and yielding in pasty materials. J Rheol 47(5):1211–1226. doi:10.1122/1.1595098 CrossRef

Clasen C (2012) High shear rheometry using hydrodynamic lubrication flows. J Rheol, in press

Clasen C, McKinley GH (2004) Microrheometry: gap-dependent rheology and tribology of complex fluids. In: Lee JW, Lee SJ (eds) The XIVth international congress on rheology. The Korean Society of Rheology, Seoul, pp 1–3

Clasen C, Gearing BP, McKinley GH (2006) The flexure-based microgap rheometer (FMR). J Rheol 50(6):883–905CrossRef

Clasen C, Kavehpour HP, McKinley GH (2010) Bridging tribology and microrheology of thin films. Appl Rheol 20(4):196–208. doi:10.3933/ApplRheol-20–45049

Cohen Y, Metzner AB (1985) Apparent slip-flow of polymer-solutions. J Rheol 29(1):67–102CrossRef

Davies GA, Stokes JR (2008) Thin film and high shear rheology of multiphase complex fluids. J Non-Newton Fluid Mech 148(1–3):73–87CrossRef

Derakhshandeh B, Hatzikiriakos SG, Bennington CPJ (2010) Rheology of pulp suspensions using ultrasonic Doppler velocimetry. Rheol Acta 49(11–12):1127–1140. doi:10.1007/s00397-010-0485-2 CrossRef

Dimitriou CJ, McKinley GH, Venkatesan R (2011) Rheo-PIV Analysis of the yielding and flow of model waxy crude oils. Energy Fuels 25(7):3040–3052. doi:10.1021/ef2002348 CrossRef

Erni P, Varagnat M, Clasen C, Crest J, McKinley GH (2011) Microrheometry of sub-nanolitre biopolymer samples: non-Newtonian flow phenomena of carnivorous plant mucilage. Soft Matter 7(22):10889–10898. doi:10.1039/c1sm05815k CrossRef

Giacomin AJ, Samurkas T, Dealy JM (1989) A novel sliding plate rheometer for molten plastics. Polym Eng Sci 29(8):499–504CrossRef

Hatzikiriakos SG (1993) A slip model for linear-polymers based on adhesive failure. Int Polym Process 8(2):135–142

Hatzikiriakos SG, Dealy JM (1991) Wall slip of molten high-density polyethylene.1. Sliding plate rheometer studies. J Rheol 35(4):497–523CrossRef

Kalika DS, Denn MM (1987) Wall slip and extrudate distortion in linear low-density polyethylene. J Rheol 31(8):815–834. doi:10.1122/1.549942 CrossRef

Kalyon DM, Yaras P, Aral B, Yilmazer U (1993) Rheological behaviour of a concentrated suspension—a solid rocket fuel simulant. J Rheol 37(1):35–53. doi:10.1122/1.550435 CrossRef

Kojic N, Bico J, Clasen C, McKinley GH (2006) Ex vivo rheology of spider silk. J Exp Biol 209(21):4355–4362CrossRef

Kramer J, Uhl JT, Prudhomme RK (1987) Measurement of the viscosity of guar gum solutions to 50,000 1/s using a parallel plate rheometer. Polym Eng Sci 27(8):598–602CrossRef

Laun HM (2004) Capillary rheometry for polymer melts revisited. Rheol Acta 43(5):509–528. doi:10.1007/s00397-004-0387-2 CrossRef

Lumma D, Best A, Gansen A, Feuillebois F, Radler JO, Vinogradova OI (2003) Flow profile near a wall measured by double-focus fluorescence cross-correlation. Phys Rev E 67(5):10. doi:10.1103/PhysRevE.67.056313 CrossRef

Macosko C (1994) Rheology: principles, measurements, and applications. VCH, New York

Mair RW, Callaghan PT (1996) Observation of shear banding in worm-like micelles by NMR velocity imaging. Europhys Lett 36(9):719–724. doi:10.1209/epl/i1996–00293–9 CrossRef

Manneville S, Becu L, Colin A (2004) High-frequency ultrasonic speckle velocimetry in sheared complex fluids. Eur Phys J-Appl Phys 28(3):361–373. doi:10.1051/epjap:2004165 CrossRef

Meeker SP, Bonnecaze RT, Cloitre M (2004a) Slip and flow in pastes of soft particles: direct observation and rheology. J Rheol 48(6):1295–1320. doi:10.1122/1.1795171 CrossRef

Meeker SP, Bonnecaze RT, Cloitre M (2004b) Slip and flow in soft particle pastes. Phys Rev Lett 92(19):4. doi:10.1103/PhysRevLett.92.198302 CrossRef

Migler KB, Hervet H, Leger L (1993) Slip transition of a polymer melt under shear-stress. Phys Rev Lett 70(3):287–290CrossRef

Mooney M (1931) Explicit formulas for slip and fluidity. J Rheol 2:210–222CrossRef

Navier CLMH (1823) On the laws of movement of fluids. Mém de l’Acad Roy des Sciences de l’Inst de France 6:389–440

Neto C, Evans DR, Bonaccurso E, Butt HJ, Craig VSJ (2005) Boundary slip in Newtonian liquids: a review of experimental studies. Rep Prog Phys 68(12):2859–2897. doi:10.1088/0034-4885/68/12/r05 CrossRef

Piau JM, Piau A (2005) Letter to the editor: comment on “origin of concentric cylinder viscometry” [J Rheol 49:807–818 (2005)]. The relevance of the early days of viscosity, slip at the wall, and stability in concentric cylinder viscometry. J Rheol 49(6):1539–1550. doi:10.1122/1.2072087

Picard G, Ajdari A, Bocquet L, Lequeux F (2002) Simple model for heterogeneous flows of yield stress fluids. Phys Rev E 66(5):12. doi:10.1103/PhysRevE.66.051501 CrossRef

Princen HM, Kiss AD (1986) Rheology of foams and highly concentrated emulsions. III: Static shear modulus. J Colloid Interface Sci 112(2):427–437. doi:10.1016/0021-9797(86)90111-6 CrossRef

Reimers MJ, Dealy JM (1998) Sliding plate rheometer studies of concentrated polystyrene solutions: nonlinear viscoelasticity and wall slip of two high molecular weight polymers in tricresyl phosphate. J Rheol 42(3):527–548CrossRef

Rofe CJ, deVargas L, PerezGonzalez J, Lambert RK, Callaghan PT (1996) Nuclear magnetic resonance imaging of apparent slip effects in xanthan solutions. J Rheol 40(6):1115–1128. doi:10.1122/1.550775 CrossRef

Russel WB, Grant MC (2000) Distinguishing between dynamic yielding and wall slip in a weakly flocculated colloidal dispersion. Colloids Surf A Physicochem Eng Asp 161(2):271–282. doi:10.1016/s0927-7757(99)00376-3 CrossRef

Salmon JB, Becu L, Manneville S, Colin A (2003) Towards local rheology of emulsions under Couette flow using dynamic light scattering. Eur Phys J E 10(3):209–221. doi:10.1140/epje/i2002-10110-5 CrossRef

Seth JR, Cloitre M, Bonnecaze RT (2008) Influence of short-range forces on wall-slip in microgel pastes. J Rheol 52(5):1241–1268. doi:10.1122/1.2963135 CrossRef

Yeow YL, Leong YK, Khan A (2006) Non-Newtonian flow in parallel-disk viscometers in the presence of wall slip. J Non-Newton Fluid Mech 139(1–2):85–92. doi:10.1016/j.jnnfm.2006.07.005 CrossRef

Yeow YL, Leong YK, Khan A (2008) Slow steady viscous flow of newtonian fluids in parallel-disk viscometer with wall slip. J Appl Mech-Trans ASME 75(4):7. doi:10.1115/1.2910901 CrossRef

Yoshimura A, Prudhomme RK (1988) Wall slip corrections for Couette and parallel disk viscometers. J Rheol 32(1):53–67CrossRef

Title: Determining the true slip of a yield stress material with a sliding plate rheometer
Author: Christian Clasen
Publication date: 01-10-2012
Publisher: Springer-Verlag
Published in: Rheologica Acta / Issue 10/2012
Print ISSN: 0035-4511
Electronic ISSN: 1435-1528
DOI: https://doi.org/10.1007/s00397-012-0647-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Other articles of this Issue 10/2012

Determination of axial forces during the capillary breakup of liquid filaments – the tilted CaBER method

Measuring yield stress: a new, practical, and precise technique derived from detailed penetrometry analysis

Origin of the echo phenomenon upon flow reversal in low molecular weight nematic liquid crystals

Flow characteristics and mixing performance of electrokinetically driven non-Newtonian fluid in contraction–expansion microchannel

Premium Partners