Top

Metallurgist

Published in:

24-10-2017

Development of a Technology for a Hydraulic Radial Forging Machine at the Elektrostal Metallurgical Plant

Authors: S. G. Glushenkova, K. A. Polozhentsev, A. I. Dmitriev, I. A. Gorev, P.-J. Nieschwietz

Published in: Metallurgist | Issue 5-6/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A forging technology for a SMS Meer radial forging machine is described. Installing a radial forging machine is a stage of retrofitting the Elektrostal Metallurgical Plant. The technology was developed at the Elektrostal Metallurgical Plant. Forging sequences for high-speed and high-chromium steels as well as heat-resistant alloys are described. The production of square bars on the radial-forging machine using round-bar dies was tested. The forging sequences for a radial forging machine and free-forging sequences for a 16MN press are compared.

previous article Influence of the Axial Reduction Conditions on the Variation in the Thickness of a Wheel Rim at the Initial Stage of Rolling

next article Desulfurization of Single-Crystal Nickel Superalloys with Vacuum Melting

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

V. S. Parshin, A. P. Karamyshev, A. E. Chigrinskii, et al., “Mathematical model of a lever radial forging machine under dynamic loading,” Vestn. Magnitogorsk. Gos. Tekhn. Univ. im. Nosova, No. 4 (52), 100–104 (2015).

A. Ya. Dmitrieva, “Finite-element prediction of the mechanical properties of a product after cold radial forging,” Izv. Vuz., Mashinostr., No. 7, 31–37 (2011).

G. N. Kulik, V. A. Nazaryan, and I. N. Pankratov, “Some aspects in modeling of metal forming processes,” Innovatsii, No. 2, 19–22 (2011).

S. I. Zakarlyukin and G. I. Koval’, “Application of SKK-14 radial forging machine for cold and hot forging of tubes,” Vestn. Yuzhno-Ural. Gos. Univ. Ser. Metallurg., 15, No. 2, 106–113 (2015).

S. I. Zakarlyukin, E. A. Zakarlyukina, and G. I. Koval’, “Facility for producing solid and hollow forgings of constant and variable cross-section from special metals and alloys,” Vestn. Yuzhno-Ural. Gos. Univ. Ser. Metallurg., 14, No. 1, 73–79 (2011).

O. N. Mitin and Yu. A. Ivanov, “Analysis of the existing processes for producing corrugated cylindrical billets,” Izv. Tulsk. Gos. Univ. Tekhn. Nauki, No. 1, 150–156 (2013).

D. M. Levin, M. V. Bulavin, and S. A. Kulikov, “Neutron diffraction study of the residual stresses and texture of the walls of steel tubes. I. Spatial distribution of residual stresses and microdistortions,” Izv. Tulsk. Gos. Univ. Estestv. Nauki, No. 2–1, 194–206 (2013).

D. M. Levin, M. V. Bulavin, and S. A. Kulikov, “Neutron diffraction study of the residual stresses and texture of the walls of steel tubes. II. Texture analysis,” Izv. Tulsk. Gos. Univ. Estestv. Nauki, No. 2–1, 207–214 (2013).

I. D. Trufanov, A. P. Lyutyi, K. I. Chumakov, et al., “Science-based resolution of innovative identification issues for steel-and-alloy electrometallurgy automation systems,” Vost.-Evrop. Zh. Pered. Tekhnol., 3, No. 10(45) , 8–23 (2011).

10.

Xu-dong Zhou, Xiang-ru Liu, and Jian-bin Xing, “Forging penetration efficiency of steel H13 stepped shaft radial forging with GFM forging machine,” J. Shanghai Jiaotong Univ. (Sci.), 17, No. 3, 315–318 (2012).

11.

A. N. Balakhnin, D. O. Panov, M. G. Titova, et al., “Effect of cold plastic deformation by radial forging followed by heat treatment on the structure and properties of steel 10Kh3G3MF,” Metal Sci. Heat Treat., 54, No. 11, 576–581 (2013).CrossRef

12.

F. Zhu, Z. Wang, and Mi. Lv, “Multi-objective optimization method of precision forging process parameters to control the forming quality,” Int. J. Adv. Manuf. Technol., 83, No. 9, 1763–1771 (2015).

Title: Development of a Technology for a Hydraulic Radial Forging Machine at the Elektrostal Metallurgical Plant
Authors: S. G. Glushenkova
K. A. Polozhentsev
A. I. Dmitriev
I. A. Gorev
P.-J. Nieschwietz
Publication date: 24-10-2017
Publisher: Springer US
Published in: Metallurgist / Issue 5-6/2017
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-017-0506-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2017

Development of Economically Alloyed Pipe Steel of Strength Class K60

Simulation of Cold Extrusion of Hollow Parts

Study of the Structure and Properties of Materials Based on Titanium Alloys Prepared by Direct Laser Deposition

Preparation of Standard Iron Concentrates from Non-Traditional Forms of Raw Material Using a Pulsed Magnetic Field

Electrolytic Preparation of Lead from Lead Battery Recycling Plant Shaft Furnace Dust

Mechanical Alloying of Secondary Raw Material for Foam Aluminum Production

Premium Partners