Top

Published in:

11-06-2018

Digital Volume Correlation: Review of Progress and Challenges

Authors: A. Buljac, C. Jailin, A. Mendoza, J. Neggers, T. Taillandier-Thomas, A. Bouterf, B. Smaniotto, F. Hild, S. Roux

Published in: Experimental Mechanics | Issue 5/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

3D imaging has become popular for analyzing material microstructures. When time lapse series of 3D pictures are acquired during a single experiment, it is possible to measure displacement fields via digital volume correlation (DVC), thereby leading to 4D results. Such 4D analyses have been performed for almost two decades. The present paper aims at reviewing the achievements of and challenges faced by such measurement technique. Ex-situ and in-situ experiments are discussed. A general and unified DVC framework is introduced. Various sources of measurement bias and uncertainties are analyzed. The current challenges are studied and some propositions are given to address them.

next article A Theoretical Model for Estimating the Peak Cutting Force of Conical Picks

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Adam J, Klinkmueller M, Schreurs G, Wieneke B (2013) Quantitative 3D strain analysis in analogue experiments simulating tectonic deformation integration of X-ray computed tomography and digital volume correlation techniques. J Struct Geology 55:127–149

Adrian RJ (2005) Twenty years of particle image velocimetry. Exper Fluid 39:159–169

Andò E, Hall S, Viggiani G, Desrues J, Bésuelle P (2012) Experimental micromechanics: grain-scale observation of sand deformation. Géotechnique Lett 2(3):107–112

Antoulas AC, Sorensen DC, Gugercin S (2001) A survey of model reduction methods for large-scale systems. Contemp Math 280:193–220MathSciNetMATH

Avril S, Bonnet M, Bretelle AS, Grédiac M, Hild F, Ienny P, Latourte F, Lemosse D, Pagano S, Pagnacco E, Pierron F (2008) Overview of identification methods of mechanical parameters based on full-field measurements. Exp Mech 48(4):381–402

Banhart J, Borbély A, Dzieciol K, Garcia-Moreno F, Manke I, Kardjilov N, Kaysser-Pyzalla AR, Strobl M, Treimer W (2010) X-ray and neutron imaging–complementary techniques for materials science and engineering: Dedicated to Professor Dr. H.-P. Degischer on the occasion of his 65th birthday. Int J Mater Res 101(9):1069–1079

Bar-Kochba E, Toyjanova J, Andrews E, Kim K-S, Franck C (2015) A fast iterative digital volume correlation algorithm for large deformations. Exp Mech 55(1):261–274

Baruchel J, Buffière JY, Maire E, Merle P, Peix G (eds) (2000) X-ray tomography in material sciences. Hermès Science, Paris (France)

Batenburg KJ, Sijbers J (2007) DART: A fast heuristic algebraic reconstruction algorithm for discrete tomography. In: IEEE International conference on image processing (ICIP 2007), vol 4, pp IV–133

10.

Batenburg KJ, Sijbers J (2011) DART: a practical reconstruction algorithm for discrete tomography. IEEE Trans Image Process 20(9):2542–2553MathSciNetMATH

11.

Bay B (2008) Methods and applications of digital volume correlation. J Strain Anal Eng Des 43(8):745–760

12.

Bay B, Smith TS, Fyhrie DP, Saad M (1999) Digital volume correlation: three-dimensional strain mapping using X-ray tomography. Exp Mech 39(3):217–226

13.

Beaurepaire E, Boccara AC, Lebec M, Blanchot L, Saint-Jalmes H (1998) Full-field optical coherence microscopy. Opt Lett 23(4):244–246

14.

Benoit A, Guérard S, Gillet B, Guillot G, Hild F, Mitton D, Périé J-N, Roux S (2009) 3D analysis from micro-MRI during in situ compression on cancellous bone. J Biomechanics 42(14):2381–2386

15.

Berek H, Ballaschk U, Aneziris CG, Losch K, Schladitz K (2015) The correlation of local deformation and stress-assisted local phase transformations in MMC foams. Mater Charact 107:139–148

16.

Besnard G, Hild F, Roux S (2006) Finite-element displacement fields analysis from digital images: application to Portevin-Le Chatelier bands. Exp Mech 46:789–803

17.

Bormann T, Schulz G, Deyhle H, Beckmann F, de Wild M, Kueffer J, Muench C, Hoffmann W, Mueller B (2014) Combining micro computed tomography and three-dimensional registration to evaluate local strains in shape memory scaffolds. Acta Biomater 10(2):1024–1034

18.

Bornert M, Chaix J-M, Doumalin P, Dupré J-C, Fournel T, Jeulin D, Maire E, Moreaud M, Moulinec H (2004) Mesure tridimensionnelle de champs cinématiques par imagerie volumique pour l’analyse des matériaux et des matériaux et des structures. Instrumentation, Mesure, Métrologie 4:43–88

19.

Borstnar G, Gillard F, Mavrogordato M, Sinclair I, Spearing SM (2016) Three-dimensional deformation mapping of mode I interlaminar crack extension in particle-toughened interlayers. Acta Mater 103:63–70

20.

Bouterf A, Adrien J, Maire E, Brajer X, Hild F, Roux S (2016) Failure mechanisms of plasterboard in nail pull test determined by X-ray microtomography and digital Volume correlation. Exp Mech 56(8):1427–1437

21.

Bouterf A, Adrien J, Maire E, Brajer X, Hild F, Roux S (2017) Identification of the crushing behavior of brittle foam from indentation to oedometric tests. J Mech Phys Solids 98:181–200

22.

Bouterf A, Maire E, Roux S, Hild F, Brajer X, Gouillart E, Boller E (2018) Analysis of compaction in brittle foam with multiscale indentation tests. Mech Mat 118:22–30

23.

Bouterf A, Roux S, Hild F, Adrien J, Maire E, Meille S (2014) Digital volume correlation applied to X-ray tomography images from spherical indentation tests on lightweight gypsum. Strain 50(5):444–453

24.

Bowler AI, Drinkwater BW, Wilcox PD (2011) An investigation into the feasibility of internal strain measurement in solids by correlation of ultrasonic images. Proc the Royal Soc A-Math Phys Eng Sci 467 (2132):2247–2270

25.

Brault R, Germaneau A, Dupré J-C, Doumalin P, Mistou S, Fazzini M (2013) In-situ analysis of laminated composite materials by X-ray micro-computed tomography and digital volume correlation. Exp Mech 53(7):1143–1151

26.

Buffière J-Y, Maire E, Adrien J, Masse J-P, Boller E (2010) In situ experiments with X-ray tomography: an attractive tool for experimental mechanics. Exp Mech 50(3):289–305

27.

Buffière JY, Maire E, Cloetens P, Lormand G, Fougères R (1999) Characterisation of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography. Acta Mater 47(5):1613–1625

28.

Buljac A (2017) Understanding, observation and quantification of ductile failure mechanisms via 3D imaging. PhD thesis, Université Paris-Saclay

29.

Buljac A, Shakoor M, Neggers J, Bernacki M, Bouchard P-O, Helfen L, Morgeneyer TF, Hild F (2017) Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging. Comput Mech 59(3):419–441MATH

30.

Buljac A, Taillandier-Thomas T, Morgeneyer TF, Helfen L, Roux S, Hild F (2016) Slant strained band development during flat to slant crack transition in AA 2198 t8 sheet: in situ 3D measurements. Int J Fract 200(1-2):49–62

31.

Buljac A, Trejo Navas V-M, Shakoor M, Bouterf A, Neggers J, Bernacki M, Bouchard P-O, Morgeneyer TF, Hild F (2017) On the Feasibility of Calibration of Elastoplastic Parameters at the Microscale via X-Ray Microtomography and Digital Volume Correlation for the Simulation of Ductile Damage. Submitted for publication

32.

Cai B, Karagadde S, Yuan L, Marrow TJ, Connolley T, Lee PD (2014) In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al-Cu alloy. Acta Mater 76:371–380

33.

Cai B, Lee PD, Karagadde S, Marrow TJ, Connolley T (2016) Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy. Acta Mater 105:338–346

34.

Candès EJ, Romberg J, Tao T (2006) Robust uncertainty principles: exact signal reconstruction from highly incomplete frequency information. IEEE Trans Inf Theory 52(2):489–509MathSciNetMATH

35.

Champeney DC (1987) A handbook of Fourier theorems. Cambridge University Press, Cambridge (UK)MATH

36.

Chen Y, Dall’Ara E, Sales E, Manda K, Wallace R, Pankaj P, Viceconti M (2017) Micro-CT based finite element models of cancellous bone predict accurately displacement once the boundary condition is well replicated: a validation study. J Mech Behav Biomed Mater 65:644–651

37.

Chiang F-P, Mao L (2015) Development of interior strain measurement techniques using random speckle patterns. Meccanica 50(2):401–410

38.

Chinesta F, Ammar A, Cueto E (2010) Recent advances and new challenges in the use of the proper generalized decomposition for solving multidimensional models. Arch Comput Meth Eng 17(4):327–350MathSciNetMATH

39.

Choudhari C, Herblum R, Akens MK, Moore S, Hardisty M, Whyne CM (2016) Post-euthanasia micro-computed tomography-based strain analysis is able to represent quasi-static in vivo behavior of whole vertebrae. Proc Inst Mech Eng H J Eng Med 230(9):900–904

40.

Colliat-Dangus JL, Desrues J, Foray P (1988) Triaxial testing of granular soil under elevated cell pressure. In: Donaghe RT, Chaney RC, Silver ML (eds) Advanced Triaxial Testing of Soil and Rock, volume STP 977. American Society for Testing and Materials, Philadelphia, pp 290–310

41.

Cooley JW, Tuckey JW (1965) An algorithm for the machine calculation of complex fourier series. Math Comput 19(90):297–301MathSciNetMATH

42.

Coudrillier B, Campbell IC, Read AT, Geraldes DM, Vo NT, Feola A, Mulvihill J, Albon J, Abel RL, Ethier CR (2016) Effects of peripapillary scleral stiffening on the deformation of the lamina cribrosa. Invest Ophthalmol Vis Sci 57(6):2666–2677

43.

Coudrillier B, Geraldes DM, Vo NT, Atwood R, Reinhard C, Campbell IC, Raji Y, Albon J, Abel RL, Ethier CR (2016) Phase-contrast micro-computed tomography measurements of the intraocular pressure-induced deformation of the porcine lamina cribrosa. IEEE Trans Med Imaging 35(4):988–999

44.

Dahdah N, Limodin N, El Bartali A, Witz J-F, Seghir R, Charkaluk E, Buffière J-Y (2016) Damage investigation in A319 aluminium alloy by X-ray tomography and digital Volume correlation during in situ high-temperature fatigue tests. Strain 52(4):324–335

45.

Dall’Ara E, Barber D, Viceconti M (2014) About the inevitable compromise between spatial resolution and accuracy of strain measurement for bone tissue: a 3D zero-strain study. J Biomechanics 47(12):2956–2963

46.

Danesi V, Tozzi G, Cristofolini L (2016) Application of digital volume correlation to study the efficacy of prophylactic vertebral augmentation. Clin Biomech 39:14–24

47.

Davis GR, Elliot JC (2006) Artefacts in x-ray microtomography of materials. Mater Sci Eng 22(9):1011–1018

48.

Desrues J, Andò E (2015) Strain localisation in granular media. C R Phys 16(1):26–36

49.

Desrues J, Chambon R, Mokni M, Mazerolle F (1996) Void ratio evolution inside shear bands in triaxial sand specimens studied by computed tomography. Géotechnique 46(3):529–546

50.

Desrues J, Viggiani G, Bésuelle P (eds) (2006) Advances in x-ray tomography for geomaterials. Wiley / ISTE, London

51.

Donoho DL (2006) Compressed sensing. IEEE Trans Inf Theory 52(4):1289–1306MathSciNetMATH

52.

Donoho DL, Maleki A, Montanari A (2011) The noise-sensitivity phase transition in compressed sensing. IEEE Trans Inf Theory 57(10):6920–6941MathSciNetMATH

53.

Dubois A, Vabre L (2003) Ultrahigh-resolution OCT using white-light interference microscopy. In: Optical methods and optical coherence tomography in biomedicine VII, vol 4956. International Society for Optics and Photonics, pp 14–22

54.

Eastwood DS, Yufit V, Gelb J, Gu A, Bradley RS, Harris SJ, Brett DJL, Brandon NP, Lee PD, Withers PJ, Shearing PR (2014) Lithiation-induced dilation mapping in a lithium-ion battery electrode by 3D x-ray microscopy and digital volume correlation. Adv Energy Mater 4(4):1300506

55.

Elliott JA, Windle AH, Hobdell JR, Eeckhaut G, Oldman RJ, Ludwig W, Boller E, Cloetens P, Baruchel J (2002) In-situ deformation of an open-cell flexible polyurethane foam characterised by 3d computed microtomography. J Mater Sci 37(8):1547–1555

56.

Elsinga GE, Scarano F, Wieneke B, van Oudheusden BW (2006) Tomographic particle image velocimetry. Exp Fluids 41(6):933–947

57.

Engl HW, Hanke M, Neubauer A (1996) Regularization of inverse problems. Kluwer, DordrechtMATH

58.

Fedele R, Ciani A, Fiori F (2014) X-ray microtomography under loading and 3D-volume digital image correlation. A review. Fundamenta Informaticae 135(1-2):171–197MathSciNetMATH

59.

Fedele R, Ciani A, Galantucci L, Bettuzzi M, Andena L (2013) A regularized, pyramidal multi-grid approach to global 3D-volume digital image correlation based on X-ray micro-tomography. Fundamenta Informaticae 125(3-4):361–376MathSciNet

60.

Feldkamp LA, Davis LC, Kress JW (1984) Practical cone beam algorithm. J Opt Soc Am A1:612–619

61.

Feng X, Hall MS, Wu M, Hui C-Y (2014) An adaptive algorithm for tracking 3D bead displacements: application in biological experiments. Measurement Sci Technol 25(5):055701

62.

Figueroa Pilz F, Dowey PJ, Fauchille A-L, Courtois L, Bay B, Ma L, Taylor KG, Mecklenburgh J, Lee PD (2017) Synchrotron tomographic quantification of strain and fracture during simulated thermal maturation of an organic-rich shale, UK Kimmeridge Clay. J Geophys Res Solid Earth 122(4):2553–2564

63.

Fila T, Jirousek O, Jung A, Kumpova I (2016) Identification of strain fields in pure Al and hybrid Ni/Al metal foams using X-ray micro-tomography under loading. Journal of Instrumentation, 11:C11017 NOV

64.

Finegan DP, Tudisco E, Scheel M, Robinson JB, Taiwo OO, Eastwood S, Lee PD, Di Michiel M, Bay B, Hall S, Hinds G, Brett DJL, Shearing PR (2016) Quantifying Bulk Electrode Strain and Material Displacement within Lithium Batteries via High-Speed Operando Tomography and Digital Volume Correlation. Advan Sci 3(3):1500332

65.

Fischer G, Nellesen J, Anar NB, Ehrig K, Riesemeier H, Tillmann W (2013) 3D analysis of micro-deformation in VHCF-loaded nodular cast iron by µCT. Mater Sci Eng A-Struct Mater Properties Microstructure Process 577:202–209

66.

Flohr TG, McCollough CH, Bruder H, Petersilka M, Gruber K, Süss C, Grasruck M, Stierstorfer K, Krauss B, Raupach R et al (2006) First performance evaluation of a dual-source ct (dsct) system. Eur Radiol 16(2):256–268

67.

Forsberg F, Mooser R, Arnold M, Hack E, Wyss P (2008) 3D micro-scale deformations of wood in bending Synchrotron radiation µCT data analyzed with digital volume correlation. J Struct Biol 164(3):255–262

68.

Forsberg F, Siviour CR (2009) 3D deformation and strain analysis in compacted sugar using x-ray microtomography and digital volume correlation. Measurement Sci Technol 20(9):095703

69.

Forsberg F, Sjodahl M, Mooser R, Hack E, Wyss P (2010) Full Three-dimensional strain measurements on wood exposed to three-point bending analysis by use of digital volume correlation applied to synchrotron radiation micro-computed tomography image data. Strain 46(1):47–60

70.

Franck C, Hong S, Maskarinec SA, Tirrell DA, Ravichandran G (2007) Three-dimensional full-field measurements of large deformations in soft materials using confocal microscopy and digital volume correlation. Exp Mech 47(3):427–438

71.

Fu J, Haghighi-Abayneh M, Pierron F, Ruiz PD (2016) Depth-resolved full-field measurement of corneal deformation by optical coherence tomography and digital volume correlation. Exp Mech 56(7):1203–1217

72.

Fu J, Pierron F, Ruiz PD (2013) Elastic stiffness characterization using three-dimensional full-field deformation obtained with optical coherence tomography and digital volume correlation. J Biomed Opt 18(12):121512

73.

Gates M, Gonzalez J, Lambros J, Heath MT (2015) Subset refinement for digital volume correlation numerical and experimental applications. Exp Mech 55(1):245–259

74.

Gates M, Heath MT, Lambros J (2015) High-performance hybrid CPU and GPU parallel algorithm for digital volume correlation. Int J High Perform Comput Appl 29(1):92–106

75.

Genet M, Lee LC, Kozerke S (2017) A continuum finite strain formulation of the equilibrium gap regularizer for finite element image correlation. CSMA http://hal.archives-ouvertes.fr/hal-01661810/

76.

Germaneau A, Doumalin P, Dupré J-C (2007) 3D strain field measurement by correlation of volume images using scattered light recording of images and choice of marks. Strain 43(3):207–218

77.

Germaneau A, Peyruseigt F, Mistou S, Doumalin P, Dupré J-C (2010) 3D mechanical analysis of aeronautical plain bearings validation of a finite element model from measurement of displacement fields by digital volume correlation and optical scanning tomography. Opt Lasers Eng 48(6):676–683

78.

Gillard F, Boardman R, Mavrogordato M, Hollis D, Sinclair I, Pierron F, Browne M (2014) The application of digital volume correlation (DVC) to study the microstructural behaviour of trabecular bone during compression. J Mech Behav Biomed Mater 29:480–499

79.

Gomes Perini LA, Passieux J-C, Périé J-N (2014) A multigrid PGD-based algorithm for volumetric displacement fields measurements. Strain 50(4):355–367

80.

Gondrom S, Schropfer S (1999) Digital computed laminography and tomosynthesis — functional principles and industrial applications. J Nondestructive Testing Ultrasonics, 7(2)

81.

Gondrom S, Zhou J, Maisl M, Reiter H, Kröning M, Arnold W (1999) X-ray computed laminography: an approach of computed tomography for applications with limited access. Nucl Eng Des 190(1):141–147

82.

Grédiac M, Hild F (eds) (2012) Full-field measurements and identification in solid mechanics. ISTE/Wiley, London

83.

Guillet J-P, Recur B, Frederique L, Bousquet B, Canioni L, Manek-Hönninger I, Desbarats P, Mounaix P (2014) Review of terahertz tomography techniques. J Infrared Millimeter Terahertz Waves 35 (4):382–411

84.

Guvenilir A, Breunig TM, Kinney JH, Stock SR (1997) Direct observation of crack opening as a function of applied load in the interior of a notched tensile sample of al-li2090. Acta Mater 45:1977–1987

85.

Hall S, Bornert M, Desrues J, Pannier Y, Lenoir N, Viggiani C, Bésuelle P (2010) Discrete and continuum analysis of localised deformation in sand using x-ray micro ct and volumetric digital image correlation. Géotechnique 60(5):315–322

86.

Helfen L, Baumbach T, Mikulík P, Kiel D, Pernot P, Cloetens P, Baruchel J (2005) High-resolution three-dimensional imaging of flat objects by synchrotron-radiation computed laminography. Appl Phys Lett 86(7):071915

87.

Helfen L, Myagotin A, Mikulík P, Pernot P, Voropaev A, Elyyan M, Di Michiel M, Baruchel J, Baumbach T (2011) On the implementation of computed laminography using synchrotron radiation. Rev Sci Instruments 82(063702)

88.

Helfen L, Myagotin A, Rack A, Pernot P, Mikulík P, Di Michiel M, Baumbach T (2007) Synchrotron-radiation computed laminography for high-resolution three-dimensional imaging of flat devices. Phys Status Solidi (A) 204:2760–2765

89.

Helfen L, Xu F, Suhonen H, Urbanelli L, Cloetens P, Baumbach T (2013) Nano-laminography for three-dimensional high-resolution imaging of flat specimens. J Instrum 8(05):C05006

90.

Herman GT (1979) Correction for beam hardening in computed tomography. Phys Med Biol 24(1):81

91.

Herman GT, Davidi R (2008) Image reconstruction from a small number of projections. Inverse Prob 24(045011)

92.

Hild F, Bouterf A, Chamoin L, Mathieu F, Neggers J, Pled F, Tomičević Z, Roux S (2016) Toward 4D mechanical correlation. Advan Model Simul Eng Sci 3(17):1–26

93.

Hild F, Bouterf A, Roux S (2015) Damage measurements via DIC from physical to mechanical damage. Int J Fract 191(1-2):77–105

94.

Hild F, Fanget A, Adrien J, Maire E, Roux S (2011) Three-dimensional analysis of a tensile test on a propellant with digital volume correlation. Archives Mech 63(5-6):459–478

95.

Hild F, Leclerc H, Roux S, Swiergiel N, Tomičević Z (2012) Circumventing the curse of resolution versus spatial resolution in digital image correlation from local to global and regularized approaches. In: IUTAM Symposium on advances of optical methods in experimental mechanics

96.

Hild F, Maire E, Roux S, Witz J-F (2009) Three dimensional analysis of a compression test on stone wool. Acta Mater 57:3310–3320

97.

Hild F, Raka B, Baudequin M, Roux S, Cantelaube F (2002) Multi-scale displacement field measurements of compressed mineral wool samples by digital image correlation. Appl Opt, IP 41(32):6815–6828

98.

Hild F, Roux S (2012) Comparison of local and global approaches to digital image correlation. Exp Mech 52(9):1503–1519

99.

Hild F, Roux S (2012) Digital image correlation. In: Rastogi P, Hack E (eds) Optical Methods for Solid Mechanics. A Full-Field Approach. Wiley, Weinheim, pp 183–228

100.

Hild F, Roux S, Bernard D, Hauss G, Rebai M (2013) On the use of 3D images and 3D displacement measurements for the analysis of damage mechanisms in concrete-like materials. In: Van Mier JGM, Ruiz G, Andrade C, Yu RC, Zhang XX (eds) FraMCoS-8, pp 1–11

101.

Hill DLG, Batchelor PG, Holden M, Hawkes DJ (2001) Medical image registration. Phys Med Biol 46(3):R1

102.

Hu Z, Du Y, Luo H, Zhong B, Lu H (2014) Internal deformation measurement and force chain characterization of mason sand under confined compression using incremental digital volume correlation. Exp Mech 54(9):1575–1586

103.

Hu Z, Luo H, Bardenhagen SG, Siviour CR, Armstrong RW, Lu H (2015) Internal deformation measurement of polymer bonded sugar in compression by digital volume correlation of in-situ tomography. Exp Mech 55(1):289–300

104.

Huang J, Pan X, Li S, Peng X, Xiong C, Fang J (2011) A digital volume correlation technique for 3-D deformation measurements of soft gels. Int J Appl Mech 3(2):335–354

105.

Hussein AI, Mason ZD, Morgan EF (2013) Presence of intervertebral discs alters observed stiffness and failure mechanisms in the vertebra. J Biomechanics 46(10):1683–1688

106.

Hussein AI, Morgan EF (2013) The effect of intravertebral heterogeneity in microstructure on vertebral strength and failure patterns. Osteoporos Int 24(3):979–989

107.

Jackman TM, DelMonaco AM, Morgan EF (2016) Accuracy of finite element analyses of CT scans in predictions of vertebral failure patterns under axial compression and anterior flexion. J Biomechanics 49(2):267–275

108.

Jackman TM, Hussein AI, Curtiss C, Fein PM, Camp A, De Barros L, Morgan EF (2016) Quantitative, 3D visualization of the initiation and progression of vertebral fractures under compression and anterior flexion. J Bone Miner Res 31(4):777–788

109.

Jailin C, Bouterf A, Poncelet M, Roux S (2017) In situ µCT mechanical tests: fast 4D mechanical identification. Exp Mech 57(8):1327–1340

110.

Jailin C, Buljac A, Bouterf A, Poncelet M, Hild F, Roux S (2018) Self-calibration for lab-µCT using space-time regularized projection-based DVC and model reduction. Meas Sci Tech 29:024003

111.

Joffre T, Girlanda O, Forsberg F, Sahlen F, Sjodahl M, Gamstedt EK (2015) A 3D in-situ investigation of the deformation in compressive loading in the thickness direction of cellulose fiber mats. Cellulose 22(5):2993–3001

112.

Johnson TRC, Nikolaou K, Wintersperger BJ, Leber AW, von Ziegler F, Rist C, Buhmann S, Knez A, Reiser MF, Becker CR (2006) Dual-source CT cardiac imaging: initial experience. Eur Radiol 16 (7):1409–1415

113.

Kak AC, Slaney M (1988) Principles of computerized tomographic imaging. IEEE Press, New YorkMATH

114.

Klein S, Staring M, Murphy K, Viergever MA, Pluim JPW (2010) ELASTIX: a toolbox for intensity-based medical image registration. IEEE Trans Med Imaging 29(1):196–205

115.

Kobayashi M, Toda H, Kawai Y, Ohgaki T, Uesugi K, Wilkinson DS, Kobayashi T, Aoki Y, Nakazawa M (2008) High-density three-dimensional mapping of internal strain by tracking microstructural features. Acta Mater 56(10):2167–2181

116.

Krupa K, Bekiesińska-Figatowska M (2015) Artifacts in magnetic resonance imaging. Pol J Radiol 80:93

117.

Kullback S (1959) Information theory and statistics. Wiley, New-YorkMATH

118.

Lachambre J, Réthoré J, Weck A, Buffière J-Y (2015) Extraction of stress intensity factors for 3D small fatigue cracks using digital volume correlation and x-ray tomography. Int J Fatigue 71:3–10

119.

Ladevèze P (2014) PGD In linear and nonlinear computational solid mechanics. In: Separated representations and PGD-based model reduction. Springer, pp 91–152

120.

Leclerc H, Neggers J, Mathieu F, Hild F, Roux S (2015) Correli 3.0. Agence pour la Protection des Programmes, IDDN.FR.001.520008.000. S. P.2015.000.31500

121.

Leclerc H, Périé J-N, Hild F, Roux S (2012) Digital volume correlation: what are the limits to the spatial resolution?. Mech Industry 13(6):361–371

122.

Leclerc H, Périé J-N, Roux S, Hild F (2011) Voxel-scale digital volume correlation. Exp Mech 51(4):479–490

123.

Leclerc H, Roux S, Hild F (2015) Projection savings in CT-based digital volume correlation. Exp Mech 55(1):275–287

124.

Lecomte-Grosbras P, Réthoré J, Limodin N, Witz J-F, Brieu M (2015) Three-dimensional investigation of free-edge effects in laminate composites using x-ray tomography and digital volume correlation. Exp Mech 55(1):301–311

125.

Lemaitre J (1992) A course on damage mechanics. Springer, BerlinMATH

126.

Lenoir N, Bornert M, Desrues J, Bésuelle P, Viggiani G (2007) Volumetric digital image correlation applied to x-ray microtomography images from triaxial compression tests on argillaceous rock. Strain 43:193–205

127.

Leplay P, Réthoré J, Meille S, Baietto M-C, Adrien J, Chevalier J, Maire E (2013) Three-dimensional analysis of an in situ double-torsion test by x-ray computed tomography and digital volume correlation. Exp Mech 53(7):1265–1275

128.

Lesman A, Notbohm J, Tirrel DA, Ravichandran G (2014) Contractile forces regulate cell division in three-dimensional environments. J Cell Biol 205(2):155–162

129.

Lim KY, Henderson JT, Neu CP (2013) Cell and tissue deformation measurements: texture correlation with third-order approximation of displacement gradients. J Biomechanics 46(14):2490–2496

130.

Limodin N, Réthoré J, Adrien J, Buffière J-Y, Hild F, Roux S (2011) Analysis and artifact correction for volume correlation measurements using tomographic images from a laboratory x-ray Source. Exp Mech 51(6):959–970

131.

Limodin N, Réthoré J, Buffière J-Y, Hild F, Roux S, Ludwig W, Rannou J, Gravouil A (2010) Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D Volume correlation. Acta Mater 58(8):2957–2967

132.

Limodin N, Réthoré J, Buffière JY, Gravouil A, Hild F, Roux S (2009) Crack closure and stress intensity factor measurements in nodular graphite cast iron using 3D correlation of laboratory X ray microtomography images. Acta Mater 57(14):4090–4101

133.

Liu L, Morgan EF (2007) Accuracy and precision of digital volume correlation in quantifying displacements and strains in trabecular bone. J Biomechanics 40(15):3516–3520

134.

Ludwig W, Buffière J-Y, Savelli S, Cloetens P (2003) Study of the interaction of a short fatigue crack with grain boundaries in a cast Al alloy using X-ray microtomography. Acta Mater 51(3):585–598

135.

Ludwik P (1909) Elemente der technologischen Mechanik. Verlag Von Julius Springer Leipzig (Germany)

136.

Madi K, Tozzi G, Zhang QH, Tong J, Cossey A, Au A, Hollis D, Hild F (2013) Computation of full-field displacements in a scaffold implant using digital volume correlation and finite element analysis. Med Eng Phys 35(9):1298–1312

137.

Mae BA (2003) The revolution in medical imaging. Rosen Pub. Group, New York

138.

Maes F, Collignon A, Vandermeulen D, Marchal G, Suetens P (1997) Multimodality image registration by maximization of mutual information. IEEE Trans Med Imaging 16(2):187–198

139.

Mahalanobis PC (1936) On the generalised distance in statistics. In: Proceedings of the National Institute of Sciences of India, pp 49–55

140.

Maintz JBA, Viergever MA (1998) A survey of medical image registration. Med Image Anal 2(1):1–36

141.

Maire E, Buffière J-Y, Salvo L, Blandin JJ, Ludwig W, Létang J-M (2001) On the application of x-ray microtomography in the field of materials science. Adv Eng Mater 3(8):539–546

142.

Maire E, Le Bourlot C, Adrien J, Mortensen A, Mokso R (2016) 20-Hz x-ray tomography during an in situ tensile test. Int J Fract 200(1):3–12

143.

Maire E, Withers PJ (2014) Quantitative x-ray tomography. Int Mater Rev 59(1):1–43

144.

Makitalo M, Foi A (2013) Optimal inversion of the generalized anscombe transformation for poisson-gaussian noise. IEEE Trans Image Process 22(1):91–103MathSciNetMATH

145.

Malfroy Camine V, Rudiger HA, Pioletti DP, Terrier A (2016) Full-field measurement of micromotion around a cementless femoral stem using micro-CT imaging and radiopaque markers. J Biomechanics 49(16):4002–4008

146.

Marrow TJ, Mostafavi M, Hashimoto T, Thompson GE (2014) A quantitative three-dimensional in situ study of a short fatigue crack in a magnesium alloy. Int J Fatigue 66:183–193

147.

Maskarinec SA, Franck C, Tirrell DA, Ravichandran G (2009) Quantifying cellular traction forces in three dimensions. Proc Natl Acad Sci USA 106(52):22108–22113

148.

Mathieu F, Hild F, Roux S (2012) Identification of a crack propagation law by digital image correlation. Int J Fatigue 36:146–154

149.

Mathieu F, Leclerc H, Hild F, Roux S (2015) Estimation of elastoplastic parameters via weighted FEMU and integrated-DIC. Exp Mech 55(1):105–119

150.

McDonald S, Withers PJ (2014) Combining x-ray microtomography and three-dimensional digital volume correlation to track microstructure evolution during sintering of copper powder. J Strain Anal Eng Des 49(4):257–269

151.

Mendoza A, Roux S, Schneider J, Parra E (2017) Extraction of topological differences in woven composite materials. In: 7Th conference on industrial computed tomography

152.

Mendoza A, Roux S, Schneider J, Parra E, Obert E (2017) Unwrapping textile fabric. In: 3Rd international conference on tomography of materials and structures

153.

Moore EH (1920) On the reciprocal of the general algebraic matrix. Bull Am Math Soc 2(26):394–395

154.

Morandi P, Brémand E, Doumalin P, Germaneau A, Dupré J-C (2014) New optical scanning tomography using a rotating slicing for time-resolved measurements of 3D full field displacements in structures. Opt Lasers Eng 58:85–92

155.

Morgeneyer TF, Helfen L, Mubarak H, Hild F (2013) 3D digital Volume Correlation of synchrotron radiation laminography images of ductile crack initiation an initial feasibility study. Exp Mech 53(4):543–556

156.

Morgeneyer TF, Taillandier-Thomas T, Buljac A, Helfen L, Hild F (2016) On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy (AA2139-T3). J Mech Phys Solids 96:550–571

157.

Morgeneyer TF, Taillandier-Thomas T, Helfen L, Baumbach T, Sinclair I, Roux S, Hild F (2014) In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet. Acta Mater 69:78–91

158.

Mortazavi F, Ghossein E, Levesque M, Villemure I (2014) High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation. Opt Lasers Eng 55:44–52

159.

Mostafavi M, Baimpas N, Tarleton E, Atwood R, McDonald S, Korsunsky AM, Marrow TJ (2013) Three-dimensional crack observation, quantification and simulation in a quasi-brittle material. Acta Mater 61(16):6276–6289

160.

Mostafavi M, Bradley R, Armstrong DEJ, Marrow TJ (2016) Quantifying yield behaviour in metals by x-ray nanotomography. Sci Report 6:34346

161.

Mostafavi M, Collins DM, Cai B, Bradley R, Atwood R, Reinhard C, Jiang X, Galano M, Lee PD, Marrow TJ (2015) Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed x-ray tomography and digital volume correlation. Acta Mater 82:468–482

162.

Mostafavi M, McDonald S, Cetinel H, Mummery PM, Marrow TJ (2013) Flexural strength and defect behaviour of polygranular graphite under different states of stress. Carbon 59:325–336

163.

Nahas A, Bauer M, Roux S, Boccara AC (2013) 3D static elastography at the micrometer scale using full field OCT. Biomed Opt Express 4(10):2138–2149

164.

Neggers J, Allix O, Hild F, Roux S (2018) Big data in experimental mechanics and model order reduction: today’s challenges and tomorrow’s opportunities. Arch Comput Meth Eng 25(1):143–164MathSciNetMATH

165.

Nguyen TT, Yvonnet J, Bornert M, Chateau C (2016) Initiation and propagation of complex 3D networks of cracks in heterogeneous quasi-brittle materials: direct comparison between in situ testing-microCT experiments and phase field simulations. J Mech Phys Solids 95:320–350

166.

Novelline RA (2018) Squire’s fundamentals of radiology. Harvard University Press, Cambridge

167.

Palanca M, Cristofolini L, Dall’Ara E, Curto M, Innocente F, Danesi V, Tozzi G (2016) Digital volume correlation can be used to estimate local strains in natural and augmented vertebrae: an organ-level study. J Biomechanics 49(16):3882–3890

168.

Palanca M, Tozzi G, Cristofolini L, Viceconti M, Dall’Ara E (2015) Three-dimensional local measurements of bone strain and displacement: comparison of three digital volume correlation approaches. J Biomechanical Eng-Trans ASME 137(7):071006

169.

Pan B, Wang B, Wu D, Lubineau G (2014) An efficient and accurate 3D displacements tracking strategy for digital volume correlation. Opt Lasers Eng 58:126–135

170.

Pan B, Wu D, Wang Z (2012) Internal displacement and strain measurement using digital volume correlation: a least-squares framework. Measure Sci Technol, 23(4)

171.

Parker KJ, Doyley MM, Rubens DJ (2011) Corrigendum 1: imaging the elastic properties of tissue: the 20 year perspective. Phys Med Biol 56(2):513

172.

Parker KJ, Doyley MM, Rubens DJ (2011) Imaging the elastic properties of tissue: the 20 year perspective. Phys Med Biol 56(1):R1

173.

Parker KJ, Doyley MM, Rubens DJ (2012) Corrigendum 2: imaging the elastic properties of tissue: the 20 year perspective. Phys Med Biol 57(16):5359

174.

Passieux J-C, Périé J-N (2012) High resolution digital image correlation using proper generalized decomposition: PGD-DIC. Int J Numer Methods Eng 92(6):531–550MathSciNetMATH

175.

Passieux J-C, Périé J-N, Salaün M (2015) A dual domain decomposition method for finite element digital image correlation. Int J Numer Methods Eng 102(10):1670–1682MathSciNetMATH

176.

Patterson BM, Cordes NL, Henderson K, Mertens JCE, Clarke AJ, Hornberger B, Merkle A, Etchin S, Tkachuk A, Leibowitz M, Trapp D, Qiu W, Zhang B, Bale H, Lu X, Hartwell R, Withers PJ, Bradley RS (2016) In situ laboratory-based transmission x-ray microscopy and tomography of material deformation at the nanoscale. Exp Mech 56(9):1585–1597

177.

Paz-Garcia JM, Taiwo OO, Tudisco E, Finegan DP, Shearing PR, Brett DJL, Hall S (2016) 4D analysis of the microstructural evolution of Si-based electrodes during lithiation time-lapse x-ray imaging and digital volume correlation. J Power Sources 320:196–203

178.

Penrose R (1956) On best approximate solutions of linear matrix equations. Math Proc Camb Philos Soc 52 (1):17–19MATH

179.

Petersilka M, Bruder H, Krauss B, Stierstorfer K, Flohr TG (2008) Technical principles of dual source CT. Eur J Radiol 68(3):362–368

180.

Pierron F, McDonald S, Hollis D, Fu J, Withers PJ, Alderson A (2013) Comparison of the mechanical behaviour of standard and auxetic foams by x-ray computed tomography and digital volume correlation. Strain 49(6):467–482

181.

Popescu DP, Choo-Smith L-P, Flueraru C, Mao Y, Chang S, Disano J, Sherif S, Sowa MG (2011) Optical coherence tomography: fundamental principles, instrumental designs and biomedical applications. Biophys Rev 3(3):155–169

182.

Prell D, Kyriakou Y, Kalender WA (2009) Comparison of ring artifact correction methods for flat-detector CT. Phys Med Biol 54(12):3881

183.

Rahmani B, Ghossein E, Villemure I, Levesque M (2014) In-situ mechanical properties identification of 3D particulate composites using the virtual fields method. Int J Solids Struct 51(18):3076–3086

184.

Rannou J, Limodin N, Réthore J, Gravouil A, Ludwig W, Baietto-Dubourg M-C, Buffière J-Y, Combescure A, Hild F, Roux S (2010) Three dimensional experimental and numerical multiscale analysis of a fatigue crack. Comput Methods Appl Mech Eng 199(21-22):1307–1325MATH

185.

Ren M, Liang J, Wei B (2016) Accurate B-spline-based 3-D interpolation scheme for digital volume correlation. Rev Sci Instruments 87(12):125114

186.

Réthoré J, Hild F, Roux S (2007) Shear-band capturing using a multiscale extended digital image correlation technique. Comput Methods Appl Mech Eng 196(49-52):5016–5030MATH

187.

Réthoré J, Hild F, Roux S (2008) Extended digital image correlation with crack shape optimization. Int J Numer Methods Eng 73(2):248–272MathSciNetMATH

188.

Réthoré J, Limodin N, Buffière J-Y, Hild F, Ludwig W, Roux S (2011) Digital volume correlation analyses of synchrotron tomographic images. J Strain Anal Eng Des 46(7):683–695

189.

Réthoré J, Roux S, Hild F (2009) An extended and integrated digital image correlation technique applied to the analysis fractured samples. European J Comput Mech 18:285–306MATH

190.

Réthoré J, Roux S, Hild F (2011) Optimal and noise-robust extraction of fracture mechanics parameters from kinematic measurements. Eng Fracture Mech 78(9):1827–1845

191.

Réthoré J, Tinnes J-P, Roux S, Buffière J-Y, Hild F (2008) Extended three-dimensional digital image correlation (X3D-DIC). Comptes Rendus Mécanique 336:643–649MATH

192.

Roberts BC, Perilli E, Reynolds KJ (2014) Application of the digital volume correlation technique for the measurement of displacement and strain fields in bone: a literature review. J Biomechanics 47(5):923–934

193.

Roeder BA, Kokini K, Robinson JP, Voytik-Harbin SL (2004) Local, three-dimensional strain measurements within largely deformed extracellular matrix constructs. J Biomechanical Eng-Trans ASME 126 (6):699–708

194.

Rohlfing T, Maurer CR, Bluemke DA, Jacobs MA (2003) Volume-preserving nonrigid registration of MR breast images using free-form deformation with an incompressibility constraint. IEEE Trans Med Imaging 22 (6):730–741

195.

Roux S, Hild F (2006) Stress intensity factor measurements from digital image correlation: post-processing and integrated approaches. Int J Fract 140(1-4):141–157MATH

196.

Roux S, Hild F, Viot P, Bernard D (2008) Three-dimensional image correlation from x-ray computed tomography of solid foam. Compos Part A Appl Sci Manuf 39(8):1253–1265

197.

Roux S, Réthoré J, Hild F (2009) Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks. J Phys D Appl Phys 42:214004

198.

Rueckert D, Sonoda LI, Hayes C, Hill DLG, Leach MO, Hawkes DJ (1999) Nonrigid registration using free-form deformations: application to breast MR images. IEEE Trans Med Imaging 18(8):712–721

199.

Salvo L, Cloetens P, Maire E, Zabler S, Blandin J-J, Buffière JY, Ludwig W, Boller E, Bellet D, Josserond C (2003) X-ray micro-tomography an attractive characterisation technique in materials science. Nuclear Instruments and Method Phys Res Section B: Beam Interact Mater and Atoms 200:273–286

200.

Saucedo-Mora L, Mostafavi M, Khoshkhou D, Reinhard C, Atwood R, Zhao S, Connolly B, Marrow TJ (2016) Observation and simulation of indentation damage in a SiC-SiC fibre ceramic matrix composite. Finite Elem Anal Des 110:11–19

201.

Saucedo-Mora L, Zou C, Lowe T, Marrow TJ (2017) Three-dimensional measurement and cohesive element modelling of deformation and damage in a 2.5-dimensional woven ceramic matrix composite. Fatigue Fract Eng Mater Struct 40(5):683–695

202.

Scarano F (2013) Tomographic PIV: principles and practice. Meas Sci Technol 24(1):012001

203.

Schneider J, Leclerc H, Hild F, Roux S (2015) Method for characterising a part. Patent, WO2015092212 A1

204.

Schoenberg IJ (1946) Contributions to the problem of approximation of equidistant data by analytic functions. Part A. Q Appl Math 4:45–99

205.

Shakoor M, Buljac A, Neggers J, Hild F, Morgeneyer TF, Helfen L, Bernacki M, Bouchard P-O (2017) On the choice of boundary conditions for micromechanical simulations based on 3D imaging. Int J Solids Struct 112:83–96MATH

206.

Smith TS, Bay B, Rashid MM (2002) Digital volume correlation including rotational degrees of freedom during minimization. Exp Mech 42(3):272–278

207.

Stock SR (2008) Recent advances in x-ray microtomography applied to materials. Int Mater Rev 53(3):129–181

208.

Studholme C, Hill DLG, Hawkes DJ (1996) Automated 3-D registration of MR and CT images of the head. Med Image Anal 1(2):163–175

209.

Sukjamsri C, Geraldes DM, Gregory T, Ahmed F, Hollis D, Schenk S, Amis A, Emery R, Hansen U (2015) Digital volume correlation and micro-CT: an in-vitro technique for measuring full-field interface micromotion around polyethylene implants. J Biomechanics 48(12):3447–3454

210.

Sur F, Grédiac M (2015) Measuring the noise of digital imaging sensors by stacking raw images affected by vibrations and illumination flickering. SIAM J Imag Sci 8(1):611–643MathSciNetMATH

211.

Sutton MA, Orteu JJ, Schreier H (2009) Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. Springer, New York

212.

Taillandier-Thomas T, Roux S, Hild F (2016) Soft route to 4D tomography. Phys Rev Lett 117 (2):025501MathSciNet

213.

Taillandier-Thomas T, Roux S, Morgeneyer TF, Hild F (2014) Localized strain field measurement on laminography data with mechanical regularization. Nuclear Instruments & Methods Phys Res Section B-Beam Interact Mater Atoms 324:70–79

214.

Tikhonov AN, Arsenin VY (1977) Solutions of ill-posed problems. Wiley, New YorkMATH

215.

Toda H, Maire E, Aoki Y, Kobayashi M (2011) Three-dimensional strain mapping using in situ X-ray synchrotron microtomography. J Strain Anal Eng Des 46(7):549–561

216.

Toda H, Sinclair I, Buffière J-Y, Maire E, Khor KH, Gregson P, Kobayashi T (2004) A 3d measurement procedure for internal local crack driving forces via synchrotron x-ray microtomography. Acta Mater 52:1305–1317

217.

Tomičević Z, Hild F, Roux S (2013) Mechanics-aided digital image correlation. J Strain Anal Eng Des 48:330–343

218.

Tomičević Z, Kodvanj J, Hild F (2016) Characterization of the nonlinear behavior of nodular graphite cast iron via inverse identification-analysis of uniaxial tests. Eur J Mech A Solids 59:140–154

219.

Tozzi G, Danesi V, Palanca M, Cristofolini L (2016) Elastic full-field strain analysis and microdamage progression in the vertebral body from digital volume correlation. Strain 52(5):446–455

220.

Tozzi G, Zhang Q-H, Tong J (2014) Microdamage assessment of bone-cement interfaces under monotonic and cyclic compression. J Biomechanics 47(14):3466–3474

221.

Tran H, Doumalin P, Delisée C, Dupré J-C, Malvestio J, Germaneau A (2013) 3D mechanical analysis of low-density wood-based fiberboards by x-ray microcomputed tomography and digital volume correlation. J Mater Sci 48(8):3198–3212

222.

Truesdell C, Noll W (1965) The non-linear field theories of mechanics, volume III/3. Springer, BerlinMATH

223.

Tudisco E, Hall S, Charalampidou EM, Kardjilov N, Hilger A, Sone H (2015) Full-field measurements of strain localisation in sandstone by neutron tomography and 3D-volumetric digital image correlation. Phys Procedia 69:509–515

224.

Tudisco E, Jailin C, Mendoza A, Tengattini A, Andò E, Hall S, Viggiani G, Hild F, Roux S (2017) An extension of digital volume correlation for multimodality image registration. Meas Sci Technol 28 (9):095401

225.

Vajda I (1989) Theory of statistical inference and information, vol 11, Kluwer Academic Publishers, Norwell

226.

Van Aarle W, Palenstijn WJ, De Beenhouwer J, Altantzis T, Bals S, Batenburg KJ, Sijbers J (2015) The ASTRA toolbox: a platform for advanced algorithm development in electron tomography. Ultramicroscopy 157:35–47

227.

van den Elsen PA, Pol EJD, Viergever MA (1993) Medical image matching: a review with classification. IEEE Eng Med Biol Mag 12(1):26–39

228.

Van Gompel G, Van Slambrouck K, Defrise M, Batenburg KJ, de Mey J, Sijbers J, Nuyts J (2011) Iterative correction of beam hardening artifacts in CT. Med Phys 38(S1):S36–S49

229.

Verhulp E, van Rietbergen B, Huiskes R (2004) A three-dimensional digital image correlation technique for strain measurements in microstructures. J Biomechanics 37(9):1313–1320

230.

Vertyagina Y, Mostafavi M, Reinhard C, Atwood R, Marrow TJ (2014) In situ quantitative three-dimensional characterisation of sub-indentation cracking in polycrystalline alumina. J Eur Ceram Soc 34 (12):3127–3132

231.

Wan K, Yang P (2015) Expanded digital volume correlation for ex situ applications. Measure Sci Technol 26(9)

232.

Wang B, Pan B, Tao R, Lubineau G (2017) Systematic errors in digital volume correlation due to the self-heating effect of a laboratory x-ray CT scanner. Meas Sci Technol 28(5):055402

233.

Wang L, Limodin N, El Bartali A, Witz J-F, Seghir R, Buffière J-Y, Charkaluk E (2016) Influence of pores on crack initiation in monotonic tensile and cyclic loadings in lost foam casting a319 alloy by using 3D in-situ analysis. Mater Sci Eng A 673:362–372

234.

Wang T, Jiang Z, Kemao Q, Lin F, Soon SH (2016) GPU accelerated digital volume correlation. Exp Mech 56(2):297–309

235.

Wells WM, Viola P, Atsumi H, Nakajima S, Kikinis R (1996) Multi-modal volume registration by maximization of mutual information. Med Image Anal 1(1):35–51

236.

Withers PJ (2007) X-ray nanotomography. Mater Today 10(12):26–34

237.

Xu F, Helfen L, Baumbach T, Suhonen H (2012) Comparison of image quality in computed laminography and tomography. Opt Express 20:794–806

238.

Xu S, Grande-Allen KJ (2010) The evolution of the field of biomechanics through the lens of experimental mechanics. Exp Mech 50(6):667–682

239.

Yang Z, Ren W, Sharma R, McDonald S, Mostafavi M, Vertyagina Y, Marrow TJ (2017) In-situ x-ray computed tomography characterisation of 3D fracture evolution and image-based numerical homogenisation of concrete. Cem Concr Compos 75:74–83

240.

Yeni YN, Wu B, Huang L, Oravec D (2013) Mechanical loading causes detectable changes in morphometric measures of trabecular structure in human cancellous bone. J Biomechanical Eng-Trans ASME 135 (5):54505

241.

Zauel R, Yeni YN, Bay B, Dong XN, Fyhrie DP (2006) Comparison of the linear finite element prediction of deformation and strain of human cancellous bone to 3D digital volume correlation measurements. J Biomechanical Eng-Trans ASME 128(1):1–6

242.

Zhu M-L, Zhang Q-H, Lupton C, Tong J (2016) Spatial resolution and measurement uncertainty of strains in bone and bone-cement interface using digital volume correlation. J Mech Behav Biomed Mater 57:269–279

243.

Zhuge X, Palenstijn WJ, Batenburg KJ (2016) TVR-DART: a more robust algorithm for discrete tomography from limited projection data with automated gray value estimation. IEEE Trans Image Process 25 (1):455–468MathSciNet

244.

Zitová B, Flusser J (2003) Image registration methods: a survey. Image Vis Comput 21(11):977–1000

Title: Digital Volume Correlation: Review of Progress and Challenges
Authors: A. Buljac
C. Jailin
A. Mendoza
J. Neggers
T. Taillandier-Thomas
A. Bouterf
B. Smaniotto
F. Hild
S. Roux
Publication date: 11-06-2018
Publisher: Springer US
Published in: Experimental Mechanics / Issue 5/2018
Print ISSN: 0014-4851
Electronic ISSN: 1741-2765
DOI: https://doi.org/10.1007/s11340-018-0390-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5/2018

A Robust in situ TEM Experiment for Characterizing the Fracture Toughness of the Interface in Nanoscale Multilayers

Multicycle Indentation for Evaluation of Polymer Material Viscoelastic Characteristics

Full-Field Surface 3D Shape and Displacement Measurements Using an Unfocused Plenoptic Camera

A Theoretical Model for Estimating the Peak Cutting Force of Conical Picks

Application of Moiré Interferometry to the Characterization of Orthotropic Materials in the Antisymmetric Configuration using the Virtual Fields Method

Boundary Effects in the Eigenstrain Method

Premium Partners