Top

Journal of Materials Engineering and Performance

Published in:

01-12-2015

Dislocation Configurations and Stress Distribution Along the Transverse Axis of Turbine Blade Body

Authors: Xianzi Lv, Fei Sun, Jinyan Tong, Shu Zhang, Qiang Feng, Jianxin Zhang

Published in: Journal of Materials Engineering and Performance | Issue 12/2015

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The characteristics of microstructural evolution along the transverse axis of the 1/3 position of turbine blade body have been investigated with the help of transmission electron microscopy. Dislocation configurations change with the evolution of local stress from the leading edge to the trailing edge: slip bands → dislocations → only γ/γ′ structure → dislocations → slip bands. The formation mechanism of slip bands illustrates that dislocations are generated in pairs and glide on the same plane continuously. Finite element analysis is made to assess the stress distribution along the transverse axis of turbine blade body. The instantaneous and inhomogeneous stress at the leading and trailing edges of blade body becomes the driving force for the formation of slip bands.

previous article The Effect of Processing Parameters on the Performance of Spark Plasma Sintered cBN-WC-Co Composites

next article Corrosion Resistance of Electrogalvanized Steel Coated with PEG-Modified Ceria Layers in Chloride and Sulfate Media

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

H.U. Hong, J.G. Kang, B.G. Choi, I.S. Kim, Y.S. Yoo, and C.Y. Jo, A Comparative Study on the Thermomechanical and Low Cycle Fatigue Failures of a Single Crystal Nickel-Based Superalloy, Int. J. Fatigue, 2011, 33(12), p 1592–1599CrossRef

R.C. Reed, The Superalloys Fundamentals and Applications, 1st ed., Cambridge University Press, New York, 2006CrossRef

N. Matan, D.C. Cox, P. Carter, M.A. Rist, C.M.F. Rae, and R.C. Reed, On the Kinetics of Rafting in CMSX-4 Superalloy Single Crystals, Acta Mater., 1999, 47(7), p 3367–3381CrossRef

S. Suresh, Fatigue of Materials, 2nd ed., Cambridge University Press, New York, 1998CrossRef

Editorial Committee of China Aeronautical Materials Handbook, China Aeronautical Materials Handbook, 2nd ed., China Standards, Beijing, 2002

A. Shyam and W.W. Milligan, A Model for Slip Irreversibility, and Its Effect on the Crack Propagation Threshold in a Nickel-Base Superalloy, Acta Mater., 2005, 53(3), p 835–844CrossRef

M. Petrenec, K. Obrtlik, and J. Polak, Inhomogeneous Dislocation Structure in Fatigued INCONEL 713LC Superalloy at Room and Elevated Temperatures, Mater. Sci. Eng., 2005, A400-401(25), p 485–488CrossRef

M.P. Jackson and R.C. Reed, Heat Treatment of UDIMET 720Li: The Effect of Microstructure on Properties, Mater. Sci. Eng. A, 1999, 259(1), p 85–97CrossRef

E. Nembach, K. Suzuki, M. Ichihara, and S. Takeuchi, In-Situ Deformation of the Gamma Prime Hardened Superalloy Nimonic PE16 in High-Voltage Electron Microscopes, Philos. Mag., 1985, A51(4), p 607–618CrossRef

10.

S. Nategh and S.A. Sajjadi, Dislocation Network Formation During Creep in Ni-Base Superalloy GTD-111, Mater. Sci. Eng. A, 2003, 339(1-2), p 103–108CrossRef

11.

A.K. Singh, N. Louat, and K. Sadananda, Dislocation Network Formation and Coherency Loss Around Gramma-Prime Precipitates in a Nickel-Base Superalloy, Metall. Trans. A, 1988, 19(12), p 2965–2973CrossRef

12.

D. Dye, M. Anxin, and R.C. Reed, Numerical Modelling of Creep Deformation in a CMSX-4 Single Crystal Superalloy Turbine Blade, Superalloys, TMS, 2008, 2008, p 911–919

13.

N. Miura, K. Nakata, and M. Miyazaki, Morphology of γ′ Precipitates in Second Stage High Pressure Turbine Blade of Single Crystal Nickel-Based Superalloy After Serviced, Mater. Sci. Forum, 2010, 638-642, p 2291–2296CrossRef

14.

S.X. Li, Y. Li, G.Y. Li, J.H. Yang, Z.G. Wang, and K. Lu, The Early Stage of Fatigue and Evolution of Persistent Slip Bands in a Copper Single Crystal, Philos. Mag., 2002, A82(5), p 867–883CrossRef

15.

J.X. Zhang, H. Harada, Y. Ro, Y. Koizumi, and T. Kobayashi, Thermomechanical Fatigue Mechanism in a Modern Single Crystal Nickel Base Superalloy TMS-82, Acta Mater., 2008, 56(13), p 2975–2987CrossRef

16.

X.W. Li, Z.G. Wang, and S.X. Li, Deformation Bands in Cyclically Deformed Copper Single Crystals, Philos. Mag., 2000, A80(8), p 1901–1912CrossRef

17.

N.Y. Jin, Formation of Dislocation Structures During Cyclic Deformation of FCC Crystals—I. Formation of PSBs in Crystals Oriented for Single-Slip, Acta Metall., 1989, 37(7), p 2055–2066CrossRef

Title: Dislocation Configurations and Stress Distribution Along the Transverse Axis of Turbine Blade Body
Authors: Xianzi Lv
Fei Sun
Jinyan Tong
Shu Zhang
Qiang Feng
Jianxin Zhang
Publication date: 01-12-2015
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 12/2015
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-015-1774-9

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 12/2015

Improved Stress Corrosion Cracking Resistance and Strength of a Two-Step Aged Al-Zn-Mg-Cu Alloy Using Taguchi Method

Characterization of Time-Dependent Behavior of Ramming Paste Used in an Aluminum Electrolysis Cell

Microstructure and Tensile Properties of Mg (AM60)/Al2O3 Metal Matrix Composites with Varying Volume Fractions of Fiber Reinforcement

Hot Tensile Behavior and Self-consistent Constitutive Modeling of TA15 Titanium Alloy Sheets

Effects of Carbon and Nitrogen on the Microstructure and Mechanical Properties of Carbonitrided Low-Carbon Steel

Decomposition Kinetics of Ferrite in Isothermally Aged SAF 2507-Type Duplex Stainless Steel

Premium Partners