Skip to main content
Top
Published in: Journal of Materials Engineering and Performance 7/2020

07-07-2020

Dry Sliding-Friction and Wear Behavior of Hot-Extruded Al6061/Si3N4/Cf Hybrid Metal Matrix Composite

Authors: C. S. Ramesh, Saleem Khan, Zulfiqar A. Khan

Published in: Journal of Materials Engineering and Performance | Issue 7/2020

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The effects of reinforcement addition and hot extrusion on the microstructures, micro hardness, friction, and wear behavior of aluminum (Al) hybrid composite were investigated. Al6061 dispersed with electroless nickel-coated Si3N4 (6 wt.%) and copper-coated carbon fiber (Cf) (1 wt.%) hybrid composites was developed through stir casting followed by hot extrusion. Optical micro-structural studies confirmed that the size of reinforcements decreased, and their orientations were in the extrusion direction. The decrease in the grain size (29%) of hybrid composites was larger than that in the grain size of matrix alloys under hot-extruded conditions. The synthesized hot-extruded Al6061 hybrid composite exhibited a lower coefficient of friction (51%) and high wear resistance (39%) compared with the hot-extruded Al6061 base alloy.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference H.R. Ezatpour, M. Torabi-Parazi, and S.A. Sajjadi, Microstructure and Mechanical Properties of Extruded Al/Al2O3 Composites Fabricated by Stir-Casting Process, Trans. Nonferrous Met. Soc. China, 2013, 23, p 1262–1268 H.R. Ezatpour, M. Torabi-Parazi, and S.A. Sajjadi, Microstructure and Mechanical Properties of Extruded Al/Al2O3 Composites Fabricated by Stir-Casting Process, Trans. Nonferrous Met. Soc. China, 2013, 23, p 1262–1268
2.
go back to reference C.S. Ramesh and M. Safiulla, Wear Behavior of Hot Extruded Al6061 Based Composites, Wear, 2007, 263, p 629–635 C.S. Ramesh and M. Safiulla, Wear Behavior of Hot Extruded Al6061 Based Composites, Wear, 2007, 263, p 629–635
3.
go back to reference T. Miyajima and Y. Iwai, Effects of Reinforcements on Sliding Wear Behaviour of Aluminium Matrix Composites, Wear, 2003, 255, p 606–616 T. Miyajima and Y. Iwai, Effects of Reinforcements on Sliding Wear Behaviour of Aluminium Matrix Composites, Wear, 2003, 255, p 606–616
4.
go back to reference W. Yang, Z. Xiu, G. Chen, and G. Wu, Microstructure and Thermal Conductivity of Submicron Si3N4 Reinforced 2024Al Composite, Trans. Nonferrous Met. Soc. China, 2009, 19, p 378–381 W. Yang, Z. Xiu, G. Chen, and G. Wu, Microstructure and Thermal Conductivity of Submicron Si3N4 Reinforced 2024Al Composite, Trans. Nonferrous Met. Soc. China, 2009, 19, p 378–381
5.
go back to reference W.-S. Lee, W.-C. Sue, and C.-F. Lin, The Effects of Temperature and Strain Rate on the Properties of Carbon-Fiber-Reinforced 7075 Aluminum Alloy Metal-Matrix Composite, Compos. Sci. Technol., 2000, 60, p 1975–1983 W.-S. Lee, W.-C. Sue, and C.-F. Lin, The Effects of Temperature and Strain Rate on the Properties of Carbon-Fiber-Reinforced 7075 Aluminum Alloy Metal-Matrix Composite, Compos. Sci. Technol., 2000, 60, p 1975–1983
6.
go back to reference H.U. Ruihua, M.M. Dewidar, H.-J. Kim, and J.-K. Lim, Effect of Si3N4 Addition on the Mechanical Properties, Microstructures, and Wear Resistance of Ti-6Al-4 V Alloy, J. Mater. Sci. Technol., 2007, 23, p 257–261 H.U. Ruihua, M.M. Dewidar, H.-J. Kim, and J.-K. Lim, Effect of Si3N4 Addition on the Mechanical Properties, Microstructures, and Wear Resistance of Ti-6Al-4 V Alloy, J. Mater. Sci. Technol., 2007, 23, p 257–261
7.
go back to reference H. Arik, Effect of Mechanical Alloying Process on Mechanical Properties of α-Si3N4 Reinforced Aluminum-Based Composite Materials, Mater. Des., 2008, 29, p 1856–1861 H. Arik, Effect of Mechanical Alloying Process on Mechanical Properties of α-Si3N4 Reinforced Aluminum-Based Composite Materials, Mater. Des., 2008, 29, p 1856–1861
8.
go back to reference V. Amigo, J.L. Ortiz, and M.D. Salvador, Microstructure and Mechanical behaviour of 6061Al reinforced with Silicon Nitride Particles, Processed by Powder Metallurgy, Scr. Mater., 2000, 42, p 383–388 V. Amigo, J.L. Ortiz, and M.D. Salvador, Microstructure and Mechanical behaviour of 6061Al reinforced with Silicon Nitride Particles, Processed by Powder Metallurgy, Scr. Mater., 2000, 42, p 383–388
9.
go back to reference Z. Xiu, G. Chen, G. Wu, W. Yang, and Y. Liu, Effect of Volume Fraction on Microstructure and Mechanical Properties of Si3N4/AL Composites, Trans. Nonferrous Met. Soc. China, 2011, 21, p s285–s289 Z. Xiu, G. Chen, G. Wu, W. Yang, and Y. Liu, Effect of Volume Fraction on Microstructure and Mechanical Properties of Si3N4/AL Composites, Trans. Nonferrous Met. Soc. China, 2011, 21, p s285–s289
10.
go back to reference G.B.V. Kumar, P.P. Panigrahy, N. Suresh, R. Pramod, and C.S.P. Rao, Assessment of Mechanical and Tribological Characteristics of Silicon Nitride Reinforced Aluminum Metal Matrix Composites, Compos. Part B, 2019, 175, p 107138 G.B.V. Kumar, P.P. Panigrahy, N. Suresh, R. Pramod, and C.S.P. Rao, Assessment of Mechanical and Tribological Characteristics of Silicon Nitride Reinforced Aluminum Metal Matrix Composites, Compos. Part B, 2019, 175, p 107138
11.
go back to reference C. Zhang, D. Yao, J. Yin, K. Zuo, Y. Xia, H. Liang, and Y.-P. Zeng, Effects of β-Si3N4 Whiskers Addition on Mechanical Properties and Tribological Behaviors of Al Matrix Composites, Wear, 2019, 430–431, p 145–156 C. Zhang, D. Yao, J. Yin, K. Zuo, Y. Xia, H. Liang, and Y.-P. Zeng, Effects of β-Si3N4 Whiskers Addition on Mechanical Properties and Tribological Behaviors of Al Matrix Composites, Wear, 2019, 430–431, p 145–156
12.
go back to reference Mir Irfan Ul haq and Ankush anand, Dry Sliding Friction and Wear Behavior of AA7075-Si3N4 Composite, Silicon, 2018, 10, p 1819–1829 Mir Irfan Ul haq and Ankush anand, Dry Sliding Friction and Wear Behavior of AA7075-Si3N4 Composite, Silicon, 2018, 10, p 1819–1829
13.
go back to reference J. Rams, A. Urena, M.D. Escalera, and M. Sanchez, Electroless Ni Coated Short Carbon fibres in Aluminium Matrix Composites, Compos. Part A, 2007, 38, p 566–575 J. Rams, A. Urena, M.D. Escalera, and M. Sanchez, Electroless Ni Coated Short Carbon fibres in Aluminium Matrix Composites, Compos. Part A, 2007, 38, p 566–575
14.
go back to reference H. Chen and A.T. Alpas, Wear of Aluminium Matrix Composites Reinforced with Ni-Coated Carbon Fibers, Wear, 1996, 192, p 86–98 H. Chen and A.T. Alpas, Wear of Aluminium Matrix Composites Reinforced with Ni-Coated Carbon Fibers, Wear, 1996, 192, p 86–98
15.
go back to reference L. Lei, L. Weiwei, T. Yiping, S. Bin, and H. Wenbin, Friction and Wear Properties of Short Carbon Fiber Reinforced Aluminium Matrix Composites, Wear, 2009, 266, p 733–738 L. Lei, L. Weiwei, T. Yiping, S. Bin, and H. Wenbin, Friction and Wear Properties of Short Carbon Fiber Reinforced Aluminium Matrix Composites, Wear, 2009, 266, p 733–738
16.
go back to reference A. Alten, E. Erzi, O. Gursoy, G.H. Agaoglu, D. Dispinar, and G. Orhan, Production and Mechanical Characterization of Ni-Coated Carbon Fibers Reinforced Al-6063 Alloy Matrix Composites, J. Alloys Compd., 2019, 787, p 543–550 A. Alten, E. Erzi, O. Gursoy, G.H. Agaoglu, D. Dispinar, and G. Orhan, Production and Mechanical Characterization of Ni-Coated Carbon Fibers Reinforced Al-6063 Alloy Matrix Composites, J. Alloys Compd., 2019, 787, p 543–550
17.
go back to reference K.M.S. Manu, L.A. Raag, T.P.D. Rajan, B.C. Pai, V. Petley, and S.N. Verma, Self-Lubricating Bidirectional Carbon Fiber Reinforced Smart Aluminum Composites by Squeeze Infiltration Process, J. Mater. Sci. Technol., 2019, 35, p 2559–2569 K.M.S. Manu, L.A. Raag, T.P.D. Rajan, B.C. Pai, V. Petley, and S.N. Verma, Self-Lubricating Bidirectional Carbon Fiber Reinforced Smart Aluminum Composites by Squeeze Infiltration Process, J. Mater. Sci. Technol., 2019, 35, p 2559–2569
18.
go back to reference X. Cao, Q. Shi, D. Liu, Z. Feng, Q. Liu, and G. Chen, Fabrication of Insitu Carbon Fiber/Aluminum Composites Via Friction Stir Processing: Evaluation of Microstructural, Mechanical and Tribological Behaviours, Compos. B Eng., 2018, 139, p 97–105 X. Cao, Q. Shi, D. Liu, Z. Feng, Q. Liu, and G. Chen, Fabrication of Insitu Carbon Fiber/Aluminum Composites Via Friction Stir Processing: Evaluation of Microstructural, Mechanical and Tribological Behaviours, Compos. B Eng., 2018, 139, p 97–105
19.
go back to reference C.S. Ramesh, R. Keshavamurthy, B.H. Channabasappa, and A. Ahmed, Microstructure and Mechanical Properties of Ni-P Coated Si3N4 Reinforced Al6061 Composites, Mater. Sci. Eng. A, 2009, 502, p 99–106 C.S. Ramesh, R. Keshavamurthy, B.H. Channabasappa, and A. Ahmed, Microstructure and Mechanical Properties of Ni-P Coated Si3N4 Reinforced Al6061 Composites, Mater. Sci. Eng. A, 2009, 502, p 99–106
20.
go back to reference A. Urena, J. Rams, M.D. Escalera, and M. Sanchez, Effect of Copper Electroless Coatings on the Interaction Between a Molten Al-Si-Mg Alloy and Coated Short Carbon Fibers, Compos. Part A, 2007, 38, p 1947–1956 A. Urena, J. Rams, M.D. Escalera, and M. Sanchez, Effect of Copper Electroless Coatings on the Interaction Between a Molten Al-Si-Mg Alloy and Coated Short Carbon Fibers, Compos. Part A, 2007, 38, p 1947–1956
21.
go back to reference E. Hajjari, M. Divandari, and A.R. Mirhabibi, The Effect of Applied Pressure on Fracture Surface and Tensile Properties of Nickel Coated Continuous Carbon Fibre Reinforced Aluminium Composites Fabricated by Squeeze Casting, Mater. Des., 2010, 31, p 2381–2386 E. Hajjari, M. Divandari, and A.R. Mirhabibi, The Effect of Applied Pressure on Fracture Surface and Tensile Properties of Nickel Coated Continuous Carbon Fibre Reinforced Aluminium Composites Fabricated by Squeeze Casting, Mater. Des., 2010, 31, p 2381–2386
22.
go back to reference D. Jun, L. Yaohui, Y. Sirong, and L. Wenfang, Effect of Heat-Treatment on Friction and Wear Properties of Al2O3 and Carbon Fibers Reinforced AlSi12CuMgNi Hybrid Composites, Wear, 2007, 262, p 1289–1295 D. Jun, L. Yaohui, Y. Sirong, and L. Wenfang, Effect of Heat-Treatment on Friction and Wear Properties of Al2O3 and Carbon Fibers Reinforced AlSi12CuMgNi Hybrid Composites, Wear, 2007, 262, p 1289–1295
23.
go back to reference K. Umanath, S.T. Selvamani, K. Palanikumar, and R. Sabarikreeshwaran, Dry Sliding Wear Behaviour of AA6061-T6 Reinforced SiC and Al2O3 Particulate Hybrid Composites, Proc. Eng., 2014, 97, p 694–702 K. Umanath, S.T. Selvamani, K. Palanikumar, and R. Sabarikreeshwaran, Dry Sliding Wear Behaviour of AA6061-T6 Reinforced SiC and Al2O3 Particulate Hybrid Composites, Proc. Eng., 2014, 97, p 694–702
24.
go back to reference S. Mitrovic, M. Babic, B. Stojanovic and N. Miloradovic, Tribological potential of hybrid composites based on Zinc and Aluminium alloys reinforced with SiC and Graphite particles, in Proceedings of the 12th International Conference on Tribology, Serbia, p 138–145 (2011) S. Mitrovic, M. Babic, B. Stojanovic and N. Miloradovic, Tribological potential of hybrid composites based on Zinc and Aluminium alloys reinforced with SiC and Graphite particles, in Proceedings of the 12th International Conference on Tribology, Serbia, p 138–145 (2011)
25.
go back to reference S. Basavarajappa and G. Chandramohan, Dry Sliding Wear behaviour of Hybrid Metal Matrix Composites, Mater. Sci., 2005, 11, p 253–257 S. Basavarajappa and G. Chandramohan, Dry Sliding Wear behaviour of Hybrid Metal Matrix Composites, Mater. Sci., 2005, 11, p 253–257
26.
go back to reference C.S. Ramesh, R.N. Ahmed, M.A. Mujeebu, and M.Z. Abdullah, Development and Performance Analysis of Novel Cast Copper—SiC-Gr Hybrid Composites, Mater. Des., 2009, 30, p 1957–1965 C.S. Ramesh, R.N. Ahmed, M.A. Mujeebu, and M.Z. Abdullah, Development and Performance Analysis of Novel Cast Copper—SiC-Gr Hybrid Composites, Mater. Des., 2009, 30, p 1957–1965
27.
go back to reference V.V. Monikandan, M.A. Joseph, and P.K. Rajendrakumar, Dry Sliding Wear Studies of Aluminum Matrix Hybrid Composites, Resour. Eff. Technol., 2016, 2, p S12–S24 V.V. Monikandan, M.A. Joseph, and P.K. Rajendrakumar, Dry Sliding Wear Studies of Aluminum Matrix Hybrid Composites, Resour. Eff. Technol., 2016, 2, p S12–S24
28.
go back to reference K.S. Prakash, P. Balasundar, S. Nagaraja, P.M. Gopal, and V. Kavimani, Mechanical and Wear Behaviour of Mg–SiC–Gr Hybrid Composites, J. Magnes. Alloys, 2016, 4, p 197–206 K.S. Prakash, P. Balasundar, S. Nagaraja, P.M. Gopal, and V. Kavimani, Mechanical and Wear Behaviour of Mg–SiC–Gr Hybrid Composites, J. Magnes. Alloys, 2016, 4, p 197–206
29.
go back to reference A.A. Daniel, S. Murugesan, M. Kumar, and S. Sukkasamy, Dry Sliding Wear Behaviour of Aluminium 5059/SiC/MoS2 Hybrid Metal Matrix Composites, Mater. Res., 2017, 20, p 1697–1706 A.A. Daniel, S. Murugesan, M. Kumar, and S. Sukkasamy, Dry Sliding Wear Behaviour of Aluminium 5059/SiC/MoS2 Hybrid Metal Matrix Composites, Mater. Res., 2017, 20, p 1697–1706
30.
go back to reference H.M. Mallikarjuna, C.S. Ramesh, P.G. Koppad, R. Keshavamurthy, and D. Sethuram, Nanoindentation and Wear Behaviour of Copper Based Hybrid Composites Reinforced with SiC and MWCNTs Synthesized by Spark Plasma Sintering, Vacuum, 2017, 145, p 320–333 H.M. Mallikarjuna, C.S. Ramesh, P.G. Koppad, R. Keshavamurthy, and D. Sethuram, Nanoindentation and Wear Behaviour of Copper Based Hybrid Composites Reinforced with SiC and MWCNTs Synthesized by Spark Plasma Sintering, Vacuum, 2017, 145, p 320–333
31.
go back to reference I. Sabry, M.A. Ghafaar, A.I. Mourad, and A.H. Idrisi, Stir Casted SiC-Gr/Al6061 Hybrid Composite Tribological and Mechanical Properties, SN Appl. Sci., 2020, 2(943), p 1–8 I. Sabry, M.A. Ghafaar, A.I. Mourad, and A.H. Idrisi, Stir Casted SiC-Gr/Al6061 Hybrid Composite Tribological and Mechanical Properties, SN Appl. Sci., 2020, 2(943), p 1–8
32.
go back to reference R. Deaquino-Lara, N. Soltani, A. Bahrami, E. Gutiérrez-Castañeda, E. García-Sánchez, and M.A.L. Hernandez-Rodríguez, Tribological Characterization of Al7075–Graphite Composites Fabricated by Mechanical Alloying and Hot Extrusion, Mater. Des., 2015, 67, p 224–231 R. Deaquino-Lara, N. Soltani, A. Bahrami, E. Gutiérrez-Castañeda, E. García-Sánchez, and M.A.L. Hernandez-Rodríguez, Tribological Characterization of Al7075–Graphite Composites Fabricated by Mechanical Alloying and Hot Extrusion, Mater. Des., 2015, 67, p 224–231
33.
go back to reference C.S. Ramesh and R. Keshavamurthy, Influence of Forging on Mechanical Properties of Ni-P coated Si3N4 Reinforced Al6061 Composites, Mater. Sci. Eng. A, 2012, 551, p 59–66 C.S. Ramesh and R. Keshavamurthy, Influence of Forging on Mechanical Properties of Ni-P coated Si3N4 Reinforced Al6061 Composites, Mater. Sci. Eng. A, 2012, 551, p 59–66
34.
go back to reference C.S. Ramesh, R. Keshavamurthy, B.H. Channabasappa, and S. Pramod, Friction and Wear Behaviour of Ni-P Coated Si3N4 Reinforced Al6061 Composites, Tribo Int., 2010, 43(3), p 623–634 C.S. Ramesh, R. Keshavamurthy, B.H. Channabasappa, and S. Pramod, Friction and Wear Behaviour of Ni-P Coated Si3N4 Reinforced Al6061 Composites, Tribo Int., 2010, 43(3), p 623–634
35.
go back to reference M.G. Gee and D. Butterfield, The Combined Effect of Speed and Humidity on the Wear and Friction of Silicon Nitride, Wear, 1993, 162–164, p 234–245 M.G. Gee and D. Butterfield, The Combined Effect of Speed and Humidity on the Wear and Friction of Silicon Nitride, Wear, 1993, 162–164, p 234–245
36.
go back to reference A. Khoddamzadeh, R. Liu, M. Liang, and Q. Yang, Novel Wear Resistant Materials-Carbon Fiber Reinforced Low-Carbon Stellite Alloy Composites, Compos. Part A Appl. Sci. Manuf., 2012, 43(3), p 344–352 A. Khoddamzadeh, R. Liu, M. Liang, and Q. Yang, Novel Wear Resistant Materials-Carbon Fiber Reinforced Low-Carbon Stellite Alloy Composites, Compos. Part A Appl. Sci. Manuf., 2012, 43(3), p 344–352
37.
go back to reference Z. Yongzhong and Z. Gouding, Friction and Wear Behaviour of Copper Matrix Composites Reinforced with SiC and Graphite Particles, Tribol. Lett., 2004, 1(1), p 91–98 Z. Yongzhong and Z. Gouding, Friction and Wear Behaviour of Copper Matrix Composites Reinforced with SiC and Graphite Particles, Tribol. Lett., 2004, 1(1), p 91–98
38.
go back to reference C.S. Ramesh, H. Adarsha, S. Pramod, and Z. Khan, Tribological Characteristics of Innovative Al6061-Carbon Fiber Rod Metal Matrix Composites, Mater. Des., 2013, 50, p 597–605 C.S. Ramesh, H. Adarsha, S. Pramod, and Z. Khan, Tribological Characteristics of Innovative Al6061-Carbon Fiber Rod Metal Matrix Composites, Mater. Des., 2013, 50, p 597–605
39.
go back to reference X. Caoa, Q. Shia, D. Liua, Z. Fengb, Q. Liua, and G. Chena, Fabrication of In Situ Carbon Fiber/Aluminum Composites Via Friction Stir Processing: Evaluation of Microstructural, Mechanical and Tribological Behaviours, Compos. B, 2018, 139, p 97–105 X. Caoa, Q. Shia, D. Liua, Z. Fengb, Q. Liua, and G. Chena, Fabrication of In Situ Carbon Fiber/Aluminum Composites Via Friction Stir Processing: Evaluation of Microstructural, Mechanical and Tribological Behaviours, Compos. B, 2018, 139, p 97–105
40.
go back to reference X.Y. Li and K.N. Tandon, Microstructural Characterization of Mechanically Mixed Layer and Wear Debris in Sliding Wear of an Al Alloy and an Al Based Composite, Wear, 2000, 245, p 148–161 X.Y. Li and K.N. Tandon, Microstructural Characterization of Mechanically Mixed Layer and Wear Debris in Sliding Wear of an Al Alloy and an Al Based Composite, Wear, 2000, 245, p 148–161
41.
go back to reference M.R. Rosenberger, C.E. Schvezov, and E. Forlerer, Wear of Different Aluminum Matrix Composites Under Conditions that Generate a Mechanically Mixed Layer, Wear, 2005, 259, p 590–601 M.R. Rosenberger, C.E. Schvezov, and E. Forlerer, Wear of Different Aluminum Matrix Composites Under Conditions that Generate a Mechanically Mixed Layer, Wear, 2005, 259, p 590–601
42.
go back to reference B. Venkataraman and G. Sundararajan, Correlation Between the Characteristics of the Mechanically Mixed Layer and Wear Behaviour of Aluminium, Al-7075 Alloy and Al-MMCs, Wear, 2000, 245, p 22–38 B. Venkataraman and G. Sundararajan, Correlation Between the Characteristics of the Mechanically Mixed Layer and Wear Behaviour of Aluminium, Al-7075 Alloy and Al-MMCs, Wear, 2000, 245, p 22–38
43.
go back to reference J.I. Song and K.S. Han, Mechanical Properties and Solid Lubricant Wear Behavior of Al/Al2O3/C Hybrid Metal Matrix Composites Fabricated by Squeeze Casting Method, J. Compos. Mater., 1997, 31, p 316–344 J.I. Song and K.S. Han, Mechanical Properties and Solid Lubricant Wear Behavior of Al/Al2O3/C Hybrid Metal Matrix Composites Fabricated by Squeeze Casting Method, J. Compos. Mater., 1997, 31, p 316–344
Metadata
Title
Dry Sliding-Friction and Wear Behavior of Hot-Extruded Al6061/Si3N4/Cf Hybrid Metal Matrix Composite
Authors
C. S. Ramesh
Saleem Khan
Zulfiqar A. Khan
Publication date
07-07-2020
Publisher
Springer US
Published in
Journal of Materials Engineering and Performance / Issue 7/2020
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-020-04940-5

Other articles of this Issue 7/2020

Journal of Materials Engineering and Performance 7/2020 Go to the issue

Premium Partners