Skip to main content
Top
Published in: Journal of Materials Engineering and Performance 9/2010

01-12-2010

Effect of Al2O3 Content on Electrical Breakdown Properties of Al2O3/Cu Composite

Authors: Xianhui Wang, Shuhua Liang, Ping Yang, Zikang Fan

Published in: Journal of Materials Engineering and Performance | Issue 9/2010

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Al2O3/Cu composites were prepared by external addition of Al2O3, and the effect of Al2O3 content on microstructure, density, hardness, electrical conductivity and vacuum electrical breakdown properties was studied. The results show that with increasing Al2O3 addition, the density of Al2O3/Cu composite significantly decreases, the hardness sharply increases and then slowly decreases, but the electrical conductivity invariably decreases. The vacuum breakdown test shows that with increasing Al2O3 addition, the breakdown strength first sharply increases and then decreases when the Al2O3 content exceeds 1.2 wt.%; the chopping current always exhibits a decreasing trend and the arc life first increases and then decreases. According to the morphology of arc erosion and analysis, the arc erosion resistance increases and then decreases sharply. In the range of experiments, the optimal arc erosion resistance of Al2O3/Cu composite can be obtained with the addition of 1.2 wt.% Al2O3.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference J.S. Kiang, Y. Ni, and W.T. Wu, Critical Al Content to Form External-Alumina Scales on Cu-Al Alloys, Intermetallics, 2007, 15, p 635–638CrossRef J.S. Kiang, Y. Ni, and W.T. Wu, Critical Al Content to Form External-Alumina Scales on Cu-Al Alloys, Intermetallics, 2007, 15, p 635–638CrossRef
2.
go back to reference M.X. Guo, M.P. Wang, L.F. Cao, and R.S. Lei, Work Softening Characterization of Alumina Dispersion Strengthened Copper Alloys, Mater. Charact., 2007, 58(10), p 928–935CrossRef M.X. Guo, M.P. Wang, L.F. Cao, and R.S. Lei, Work Softening Characterization of Alumina Dispersion Strengthened Copper Alloys, Mater. Charact., 2007, 58(10), p 928–935CrossRef
3.
go back to reference T.S. Srivatsan, N. Narendra, and J.D. Troxell, Tensile Deformation and Fracture Behavior of an Oxide Dispersion Strengthened Copper Alloy, Mater. Des., 2000, 21, p 191–198 T.S. Srivatsan, N. Narendra, and J.D. Troxell, Tensile Deformation and Fracture Behavior of an Oxide Dispersion Strengthened Copper Alloy, Mater. Des., 2000, 21, p 191–198
4.
go back to reference K.X. Song, J.D. Xing, and B.H. Tian, Influence of Annealing Treatment on the Properties and Microstructures of Alumina Dispersion Strengthened Copper Alloy, Trans. Nonferrous Met. Soc. China, 2005, 15(1), p 139–143 K.X. Song, J.D. Xing, and B.H. Tian, Influence of Annealing Treatment on the Properties and Microstructures of Alumina Dispersion Strengthened Copper Alloy, Trans. Nonferrous Met. Soc. China, 2005, 15(1), p 139–143
5.
go back to reference B.H. Tian, P. Liu, K.X. Song, Y. Li, Y. Liu, F.Z. Ren, and J.H. Su, Microstructure and Properties at Elevated Temperature of a Nano-Al2O3 Particles Dispersion-Strengthened Copper Base Composite, Mater. Sci. Eng. A, 2006, 435–436, p 705–710 B.H. Tian, P. Liu, K.X. Song, Y. Li, Y. Liu, F.Z. Ren, and J.H. Su, Microstructure and Properties at Elevated Temperature of a Nano-Al2O3 Particles Dispersion-Strengthened Copper Base Composite, Mater. Sci. Eng. A, 2006, 435–436, p 705–710
6.
go back to reference M.T. Marques, J.B. Correia, J.M. Criado, M.J. Diánez, and P. Matteazzi, High-temperature Stability of a Nanostructured Cu-Al2O3 Alloy, Key Eng. Mater., 2002, 230–232, p 652–655CrossRef M.T. Marques, J.B. Correia, J.M. Criado, M.J. Diánez, and P. Matteazzi, High-temperature Stability of a Nanostructured Cu-Al2O3 Alloy, Key Eng. Mater., 2002, 230–232, p 652–655CrossRef
7.
go back to reference S.H. Kim and D.N. Lee, Recrystallization of Alumina Dispersion Strengthened Copper Strips, Mater. Sci. Eng. A, 2001, 313, p 24–33CrossRef S.H. Kim and D.N. Lee, Recrystallization of Alumina Dispersion Strengthened Copper Strips, Mater. Sci. Eng. A, 2001, 313, p 24–33CrossRef
8.
go back to reference S.H. Kim and D.N. Lee, The Effect of Rolling Conditions on the Strength and Microstructure of Dispersion Strengthened Copper Strips, Mater. Sci. Eng. A, 2001, 319–321, p 471–474 S.H. Kim and D.N. Lee, The Effect of Rolling Conditions on the Strength and Microstructure of Dispersion Strengthened Copper Strips, Mater. Sci. Eng. A, 2001, 319–321, p 471–474
9.
go back to reference K. Kuchařová, S.J. Zhu, and J. Čadek, Creep in Copper Dispersion Strengthened with Alumina Particles (ODS Copper), Mater. Sci. Eng. A., 2003, 348, p 170–179CrossRef K. Kuchařová, S.J. Zhu, and J. Čadek, Creep in Copper Dispersion Strengthened with Alumina Particles (ODS Copper), Mater. Sci. Eng. A., 2003, 348, p 170–179CrossRef
10.
go back to reference K. Kuchařová, S.J. Zhu, and J. Čadek, Creep in ODS Copper Reinforced with Alumina Short Fibres—DRS Copper, Mater. Sci. Eng. A, 2003, 355, p 267–276CrossRef K. Kuchařová, S.J. Zhu, and J. Čadek, Creep in ODS Copper Reinforced with Alumina Short Fibres—DRS Copper, Mater. Sci. Eng. A, 2003, 355, p 267–276CrossRef
11.
go back to reference R.K. Islamgaliev, W. Buchgraber, Y.R. Kolobov, N.M. Amirkhanov, A.V. Sergueeva, K.V. Ivanov, and G. Grabovetskaya, Deformation Behavior of Cu-Based Nanocomposite Processed by Severe Plastic Deformation, Mater. Sci. Eng. A, 2001, 319–321, p 872–876 R.K. Islamgaliev, W. Buchgraber, Y.R. Kolobov, N.M. Amirkhanov, A.V. Sergueeva, K.V. Ivanov, and G. Grabovetskaya, Deformation Behavior of Cu-Based Nanocomposite Processed by Severe Plastic Deformation, Mater. Sci. Eng. A, 2001, 319–321, p 872–876
12.
go back to reference H. Zuhailawati and C.K. Leong, Properties and Spot Welding Behaviour of Copper-Alumina Composites Through Ball Milling and Mechanical Alloying, Mater. Des., 2008, 29(7), p 1311–1315 H. Zuhailawati and C.K. Leong, Properties and Spot Welding Behaviour of Copper-Alumina Composites Through Ball Milling and Mechanical Alloying, Mater. Des., 2008, 29(7), p 1311–1315
13.
go back to reference R. Thiraviam, T. Sornakumar, and A.S. Kumar, Development of Copper Alumina Metal Matrix Composite by Powder Metallurgy Method, Int. J. Mater. Prod. Technol., 2008, 31(2–4), p 305–313CrossRef R. Thiraviam, T. Sornakumar, and A.S. Kumar, Development of Copper Alumina Metal Matrix Composite by Powder Metallurgy Method, Int. J. Mater. Prod. Technol., 2008, 31(2–4), p 305–313CrossRef
14.
go back to reference H.K. Kang, Microstructure and Electrical Conductivity of High Volume Al2O3-Reinforced Copper Matrix Composites Produced by Plasma Spray, Surf. Coat. Technol., 2005, 190(2–3), p 448–452CrossRef H.K. Kang, Microstructure and Electrical Conductivity of High Volume Al2O3-Reinforced Copper Matrix Composites Produced by Plasma Spray, Surf. Coat. Technol., 2005, 190(2–3), p 448–452CrossRef
15.
go back to reference G.H. Xie, S.C. Li, and W.X. Wang, Quantitatively Metallographic Analysis on the Spatial Uniformity of Particles in Particle Strengthening Metal Matrix Composite, Phys. Test. Chem. Anal. A: Phys. Test., 1995, 31(1), p 36–38 (in Chinese) G.H. Xie, S.C. Li, and W.X. Wang, Quantitatively Metallographic Analysis on the Spatial Uniformity of Particles in Particle Strengthening Metal Matrix Composite, Phys. Test. Chem. Anal. A: Phys. Test., 1995, 31(1), p 36–38 (in Chinese)
16.
go back to reference J. Narciso, L. Weber, and J.M. Molina, Reactivity and Thermal Behaviour of Cu–Si/SiC Composites: Effects of SiC Oxidation, Mater. Sci. Technol., 2005, 22, p 1464–1468CrossRef J. Narciso, L. Weber, and J.M. Molina, Reactivity and Thermal Behaviour of Cu–Si/SiC Composites: Effects of SiC Oxidation, Mater. Sci. Technol., 2005, 22, p 1464–1468CrossRef
17.
go back to reference X.H. Wang, S.H. Liang, P. Yang, and Z.K. Fan, Effect of Al2O3 Particle Size on Vacuum Breakdown Behavior of Al2O3/Cu Composite, Vacuum, 2009, 83, p 1475–1480CrossRef X.H. Wang, S.H. Liang, P. Yang, and Z.K. Fan, Effect of Al2O3 Particle Size on Vacuum Breakdown Behavior of Al2O3/Cu Composite, Vacuum, 2009, 83, p 1475–1480CrossRef
Metadata
Title
Effect of Al2O3 Content on Electrical Breakdown Properties of Al2O3/Cu Composite
Authors
Xianhui Wang
Shuhua Liang
Ping Yang
Zikang Fan
Publication date
01-12-2010
Publisher
Springer US
Published in
Journal of Materials Engineering and Performance / Issue 9/2010
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-010-9607-3

Other articles of this Issue 9/2010

Journal of Materials Engineering and Performance 9/2010 Go to the issue

Premium Partners