Top

Cellulose

Published in:

19-08-2021 | Original Research

Effect of coir fiber and inorganic filler hybridization on Innegra fiber-reinforced epoxy polymer composites: physical and mechanical properties

Authors: H. M. Kavya, Saravana Bavan, B. Yogesha, M. R. Sanjay, Siengchin Suchart, Gorbatyuk Sergey

Published in: Cellulose | Issue 15/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The present investigation compares the results of different fillers in terms of the physical, mechanical, and thermal characteristics of epoxy polymers. These epoxy hybrid composites were produced using a mechanical stirring-assisted wet lay-up method with coir microparticles, fly ash, titanium carbide (TiC) nanoparticles, and Innegra fabrics by mechanical stirring with a stirring rod. The tensile, flexural, and interlaminar shear characteristics of the fabricated epoxy hybrid composites were determined using a universal testing machine. Reinforcement with fly ash and TiC nanoparticles offers the most remarkable improvement in tensile, flexural, and impact strength, at approximately 2.84, 1.65, and 9.19 times compared with pure epoxy polymer. Differential scanning calorimetry and thermogravimetric analysis showed that the epoxy hybrid composites had enhanced thermal stability. The homogeneity of filler dispersion in the epoxy polymer was observed by scanning electron microscopy.

previous article Surface engineering of cellulose nanocrystals via SI-AGET ATRP of glycidyl methacrylate and ring-opening reaction for fabricating self-healing nanocomposite hydrogels

next article Functionalization, characterization and microbiological performance of new biocompatible cellulosic dressing grafted chitosan and Suaeda fruticosa polysaccharide extract

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Abdel-Gawad NMK, El Dein AZ, Mansour DEA, Ahmed HM, Darwish MMF, Lehtonen M (2018) Multiple enhancement of PVC cable insulation using functionalized SiO₂ nanoparticles based nanocomposites. Electr Power Syst Res 163:612–625. https://doi.org/10.1016/j.epsr.2017.11.011CrossRef

Abhisek S, Sanjay MR, George R, Siengchin S, Jyotishkumar P, Pruncu CI (2018) Development of new hybrid Phoenix pusilla/carbon/fish bone filler reinforced polymer composites. J Chin Adv Mater Soc 6(4):553–560. https://doi.org/10.1080/22243682.2018.1522599CrossRef

Agarwal G, Patnaik A, Sharma RK (2014) Thermo-mechanical properties and abrasive wear behavior of silicon carbide filled woven glass fiber composites. SILICON 6:155–168. https://doi.org/10.1007/s12633-014-9184-4CrossRef

Ajdary R, Tardy BL, Mattos BD, Bai L, Rojas OJ (2020) Plant nanomaterials and inspiration from nature: water interactions and hierarchically structured hydrogels. Adv Mater. https://doi.org/10.1002/adma.202001085CrossRefPubMed

Ajorloo M, Ghodrat M, Kang WH (2021) Incorporation of recycled polypropylene and fly ash in polypropylene-based composites for automotive applications. J Polym Environ 29:1298–1309. https://doi.org/10.1007/s10924-020-01961-yCrossRef

Arpitha GR, Sanjay MR, Senthamaraikannan P, Barile C, Yogesha B (2017) Hybridization effect of sisal/glass/epoxy/filler based woven fabric reinforced composites. Exp Tech 41:577–584. https://doi.org/10.1007/s40799-017-0203-4CrossRef

Arshad MN, Mohit H, Sanjay MR, Siengchin S, Khan A, Alotaibi MM, Asiri AM, Rub MA (2021) Effect of coir fiber and TiC nanoparticles on basalt fiber reinforced epoxy hybrid composites: physic-mechanical characteristics. Cellulose 28:3451–3471. https://doi.org/10.1007/s10570-021-03752-7CrossRef

Ashok KG, Kalaichelvan K, Damodaran A (2020) Effect of nano fillers on mechanical properties of Luffa fiber epoxy composites. J Nat Fibers. https://doi.org/10.1080/15440478.2020.1779898CrossRef

Asl SMH, Ghadi A, Baei MS, Javadian H, Maghsudi M, Kazemian H (2018) Porous catalysts fabricated from coal fly ash as cost-effective alternatives for industrial applications: a review. Fuel 217:320–342. https://doi.org/10.1016/j.coal.2017.05.007CrossRef

Asl SMH, Javadian H, Khavarpour M, Belviso C, Taghavi M, Maghsudi M (2019) Porous catalysts fabricated from coal fly ash as cost-effective alternatives for industrial applications: a review. J Clean Prod 208:1131–1147. https://doi.org/10.1016/j.fuel.2017.12.111CrossRef

Baheti V, Wang Y (2021) Ohmic heating and mechanical stability of carbon fabric/green epoxy composites after incorporation of fly ash particles. Mater Today Commun 26:101710. https://doi.org/10.1016/j.mtcomm.2020.101710CrossRef

Bal S (2010) Experimental study of mechanical and electrical properties of carbon nanofiber/epoxy composites. Mater Des 31(5):2406–2413. https://doi.org/10.1016/j.matdes.2009.11.058CrossRef

Becker C, Krug H, Schmidt H (1996) Tailoring of thermomechanical properties of thermoplastic nanocomposites by surface modification of nanoscale silica particles. MRS Proc 435:237. https://doi.org/10.1557/proc-435-237CrossRef

Cai J, Pan J, Li X, Tan J, Li J (2020) Electrical resistivity of fly ash and metakaolin based geopolymers. Constr Build Mater 234:117868. https://doi.org/10.1016/j.conbuildmat.2019.117868CrossRef

Chatterjee A, Islam MS (2008) Fabrication and characterization of TiO₂-epoxy nanocomposite. Mater Sci Eng A 487(1–2):574–585. https://doi.org/10.1016/j.msea.2007.11.052CrossRef

Chaurasia A, Verma A, Parashar A, Mulik RS (2019) Experimental and computational studies to analyze the effect of h-BN nanosheets on mechanical behavior of h-BN/polyethylene nanocomposites. J Phys Chem C 123:20059–20070. https://doi.org/10.1021/acs.jpcc.9b05965CrossRef

Cui JY, Cai YB, Yuan WJ, Lv ZF, Zhang C, Xu SA (2017) Preparation of PMMA grafted calcium carbonate whiskers and its reinforcement effect in PVC. Polym Compos 38:2753–2761. https://doi.org/10.1002/pc.23873CrossRef

Dahalan ENE, Sofian AH, Abdullah A, Noor NM (2018) Corrosion behavior of organic epoxy-xinc coating with fly ash as an extender pigment. Mater Today 5:21629–21635. https://doi.org/10.1016/j.matpr.2018.07.012CrossRef

Deshmukh AR, Aloui HA, Khomlaem C, Negi A, Yun JH, Kim HS (2021) Biodegradable films based on chitosan and defatted Chlorella biomass: functional and physical characterization. Food Chem 337:127777. https://doi.org/10.1016/j.foodchem.2020.127777CrossRefPubMed

Dinesh S, Kumaran P, Mohanamurugan S, Vijay R, Lenin Singaravelu D, Vinod A, Sanjay MR, Siengchin S (2020) Influence of wood dust fillers on the mechanical, thermal, water absorption and biodegradation characteristics of jute fiber epoxy composites. J Polym Res 27(9):1–13. https://doi.org/10.1007/s10965-019-1975-2CrossRef

Ding J, Ma SH, Shen S, Xie ZL, Zheng SL, Zhang Y (2017) Research and industrialization progress of recovering alumina from fly ash: a concise review. Waste Manag 60:375–387. https://doi.org/10.1016/j.wasman.2016.06.009CrossRefPubMed

Duraibabu D, Alagar M, Kumar SA (2014) Studies on mechanical, thermal and dynamic mechanical properties of functionalized nanoalumina reinforced sulphone ether linked tetraglycidyl epoxy nanocomposites. RSC Adv 4(76):40132–40140. https://doi.org/10.1039/c4ra06511eCrossRef

Eskin GI (2001) Broad prospects for commercial application of the ultrasonic (cavitation) melt treatment of light alloys. Ultrason Sonochem 8(3):319–325. https://doi.org/10.1016/s1350-4177(00)00074-2CrossRefPubMed

Finch A (1970) Chemical applications of far infrared spectroscopy. Academic Press, New York

Ganapathy T, Sathiskumar R, Sanjay MR, Senthamaraikannan P, Saravanakumar SS, Jyotishkumar P, Siengchin S (2019) Effect of graphene powder on banyan aerial root fibers reinforced epoxy composites. J Nat Fiber. https://doi.org/10.1080/15440478.2019.1675219CrossRef

Ganesan K, Kailasanathan C, Sanjay MR, Senthamaraikannan P, Saravanakumar SS (2020) A new assessment on mechanical properties of jute fiber mat with egg shell powder/nanoclay-reinforced polyester matrix composites. J Nat Fiber 17(4):482–490. https://doi.org/10.1080/15440478.2018.1500340CrossRef

Halder S, Ghosh PK, Goyat MS (2012a) Influence of ultrasonic dual mode mixing on morphology and mechanical properties of ZrO₂-epoxy nanocomposite. High Perform Polym 24(4):331–341. https://doi.org/10.1177/0954008312440714CrossRef

Halder S, Ghosh PK, Goyat MS, Ray S (2012b) Ultrasonic dual mode mixing and its effect on tensile properties of SiO₂-epoxy nanocomposite. J Adhes Sci Technol 27(2):111–124. https://doi.org/10.1080/01694243.2012.701510CrossRef

Hower JC, Groppo JG, Graham UM, Ward CR, Kostova IJ, Maroto-Valer MM, Dai S (2017) Coal-derived unburned carbons in fly ash: a review. J Coal Geol 179:11–27. https://doi.org/10.1016/j.earscirev.2014.11.016CrossRef

Imai T, Sawa F, Nakano T, Ozaki T, Shimizu T, Kozako M, Tanaka T (2006) Effects of nano- and micro-filler mixture on electrical insulation properties of epoxy based composites. IEEE Trans Dielectr Electr Insul 13(2):319–326. https://doi.org/10.1109/tdei.2006.1624276CrossRef

Jagadeesh P, Yashas GTG, Madhu P, Sanjay MR, Siengchin S (2020) Effect of natural filler materials on fiber reinforced hybrid polymer composites: an overview. J Nat Fiber. https://doi.org/10.1080/15440478.2020.1854145CrossRef

Jena DK, Sahoo PK (2019) New strategies for the construction of eggshell powder reinforced starch based fire hazard suppression biomaterials with tailorable thermal, mechanical and oxygen barrier properties. Int J Biol Macromol 140:496–504. https://doi.org/10.1016/j.ijbiomac.2019.08.156CrossRefPubMed

Jenish I, Chinnasamy SGV, Basavarajappa S, Indran S, Divya D, Liu Y, Sanjay MR, Siengchin S (2020) Tribo-mechanical characterization of carbonized coconut shell micro particle reinforced with Cissus quadrangularis stem fiber/epoxy novel composite for structural application. J Nat Fiber. https://doi.org/10.1080/15440478.2020.1838988CrossRef

Ji M, Li F, Li J, Zhang C, Sun K, Guo K (2021) Enhanced mechanical properties, water resistance, thermal stability, and biodegradation of the starch-sisal fiber composites with various fillers. Mater Des 198:109373. https://doi.org/10.1016/j.matdes.2020.109373CrossRef

Kang S, Hong SI, Choe CR, Park M, Rim S, Kim J (2001) Preparation and characterization of epoxy composites filled with functionalized nanosilica particles obtained via sol–gel process. Polymer 42(3):879–887. https://doi.org/10.1016/s0032-3861(00)00392-xCrossRef

Kavya HM, Bavan S, Yogesha B, Sanjay MR, Siengchin S, Gorbatyuk S (2021) Effect of coir fiber and inorganic filler on physical and mechanical properties of epoxy based hybrid composites. Polym Compos. https://doi.org/10.1002/pc.26103CrossRef

Khaleghi M, Didehban K, Shabanian M (2017) Effect of new melamine-terephthaldehyde resin modified graphene oxide on thermal and mechanical properties of PVC. Polym Test 63:382–391. https://doi.org/10.1016/j.polymertesting.2017.08.018CrossRef

Khandelwal S, Rhee RY (2020) Recent advances in basalt-fiber-reinforced composites: tailoring the fiber-matrix interface. Compos B Eng 192:108011. https://doi.org/10.1016/j.compositesb.2020.108011CrossRef

Kumar A, Anant R, Kumar K, Chauhan SS, Kumar S, Kumar R (2016) Anticorrosive and electromagnetic shielding response of a graphene/TiO₂–epoxy nanocomposite with enhanced mechanical properties. RSC Adv 6(114):113405–113414. https://doi.org/10.1039/c6ra15273bCrossRef

Kumar K, Kumar S, Kumar A, Anant R, Kumar R (2017) Viscoelastic and thermally stable PDMS-SiO₂ filled epoxy adhesive joint on steel substrate. Polym Compos 39:2889–2896. https://doi.org/10.1002/pc.24285CrossRef

Kumar K, Ghosh PK, Kumar A, Singh O (2021) Enhanced thermomechanical properties of ZrO₂ particle reinforced epoxy nanocomposite. J Mater Eng Perform 30(1):145–153. https://doi.org/10.1007/s11665-020-05350-3CrossRef

Lei L, Shan J, Hu J, Liu X, Zhao J, Tong Z (2016) Co-curing effect of imidazole grafting graphene oxide synthesized by one-pot method to reinforce epoxy nanocomposites. Compos Sci Technol 128:161–168. https://doi.org/10.1016/j.compscitech.2016.03.029CrossRef

Liu P, Zhong W (2014) Novel magnetic crosslinked composites with fly ash as filler via facile “one-pot” in-situ radical bulk polymerization. J Taiwan Inst Chem Eng 45:1098–1104. https://doi.org/10.1016/j.jtice.2013.09.029CrossRef

Ma X, Peng C, Zhou D, Wu Z, Li S, Wang J, Sun N (2018) Synthesis and mechanical properties of the epoxy resin composites filled with sol–gel derived ZrO₂ nanoparticles. J Sol-Gel Sci Technol 88(2):442–453. https://doi.org/10.1007/s10971-018-4827-3CrossRef

Mallakpour S, Khadem E (2015) Recent development in the synthesis of polymer nanocomposites based on nano-alumina. Prog Polym Sci 51:74–93. https://doi.org/10.1016/j.progpolymsci.2015.07.004CrossRef

May CA, Tanaka Y (1973) Epoxy resin: chemistry and technology. Marcel Dekker, New York

Mc Adams LV, Gannon JA (1986) Encyclopedia of polymer science and engineering. Wiley, New York

Mohit H, Selvan VAM (2018) A comprehensive review on surface modification, structure interface and bonding mechanism of plant cellulose fiber reinforced polymer based composites. Compos Interfaces 25(5–7):629–667. https://doi.org/10.1080/09276440.2018.1444832CrossRef

Mohit H, Selvan VAM (2019a) a) Physical and thermomechanical characteristics of the novel aluminum silicon carbide reinforced polymer nanocomposites. Iran Polym J 28(10):823–837. https://doi.org/10.1007/s13726-019-00746-yCrossRef

Mohit H, Selvan VAM (2019b) Effect of a novel chemical treatment on nanocellulose fibers for enhancement of mechanical, electrochemical and tribological characteristics of epoxy bio-nanocomposites. Fibers Polym 20(9):1918–1944. https://doi.org/10.1007/s12221-019-1224-7CrossRef

Mohit H, Selvan VAM (2019c) Thermo-mechanical properties of sodium chloride and alkaline treated sugarcane bagasse fiber. Indian J Fiber Text Res 44:286–293

Mohit H, Selvan VAM (2020a) Effect of a novel chemical treatment on the physico-thermal properties of sugarcane nanocellulose fiber reinforced epoxy nanocomposites. Int Polym Proc 35(2):211–220. https://doi.org/10.3139/217.3855CrossRef

Mohit H, Selvan VAM (2020b) Effect of Al-SiC nanoparticles and cellulose fiber dispersion on the thermomechanical and corrosion characteristics of polymer nanocomposites. Polym Compos 41(5):1878–1899. https://doi.org/10.1002/pc.25505CrossRef

Mohit H, Sanjay MR, Vinod K, Dhakal HN, Siengchin S (2020) A comprehensive review on mechanical, electromagnetic radiation shielding, and thermal conductivity of fibers/inorganic fillers reinforced hybrid polymer composites. Polym Compos 41(10):3940–3965. https://doi.org/10.1002/pc.25703CrossRef

Mohit H, Sanjay MR, Siengchin S, Khan A, Marwani HM, Dzudzevic-cancar H, Asiri AM (2021a) Effect of TiC nanoparticles reinforcement in coir fiber based bio/synthetic epoxy hybrid composites: mechanical and thermal characteristics. J Polym Environ. https://doi.org/10.1007/s10924-021-02069-7CrossRef

Mohit H, Srisuk R, Sanjay MR, Siengchin S, Khan A, Marwani HM, Dzudzevic-cancar H, Asiri AM (2021b) Nanoparticles addition in coir-basalt-innegra fibers reinforced bio-synthetic epoxy composites. J Polym Environ. https://doi.org/10.1007/s10924-021-02133-2CrossRef

Niu YA, Zhang X, Tian YQ, Zhao JP, Yan XQ, Li Y (2014) Fabrication, structure and mechanism of reduced graphene oxide-based carbon composite films. J Mater Chem 2:10502. https://doi.org/10.1039/c4ta00921eCrossRef

Niu Y, Zheng S, Song P, Zhang X, Wang C (2021) Mechanical and thermal properties of PEEK composites by incorporating inorganic particles modified phosphates. Compos B Eng 212:108715. https://doi.org/10.1016/j.compositesb.2021.108715CrossRef

Ogasawara T, Moon SY, Inoue Y, Shimamura Y (2011) Mechanical properties of aligned multi-walled carbon nanotube/epoxy composites processed using a hot-melt prepreg method. Compos Sci Technol 71(16):1826–1833. https://doi.org/10.1016/j.compscitech.2011.08.009CrossRef

Omrani A, Simon LC, Rostami AA (2009) The effects of alumina nanoparticle on the properties of an epoxy resin system. Mater Chem Phys 114:145–150. https://doi.org/10.1016/j.matchemphys.2008.08.090CrossRef

Radoman TS, Dzunuzovic JV, Jeremic KB, Grgur BN, Milicevic DS, Popovic IG, Dzunuzovic ES (2014) Improvement of epoxy resin properties by incorporation of TiO₂ nanoparticles surface modified with gallic acid esters. Mater Des 62:158–167. https://doi.org/10.1016/j.matdes.2014.05.015CrossRef

Ramesh M, Deepa C, Kumar LR, Sanjay MR, Siengchin S (2020) Life-cycle and environmental impact assessments on processing of plant fibers and its bio-composites: a critical review. J Ind Tex. https://doi.org/10.1177/1528083720924730CrossRef

Rao YS, Mohan NS, Shetty N, Shivamurthy B (2021) Effects of solid lubricant fillers on the flexural and shear strength response of carbon fabric-epoxy composites. Polym Test 96:107085. https://doi.org/10.1016/j.polymertesting.2021.107085CrossRef

Re B (1979) Epoxy resin chemistry, advances in chemistry. American Chemical Society, Washington

Rong MZ, Zhang MQ, Liu H, Zeng H, Wetzel B, Friedrich K (2001) Microstructure and tribological behavior of polymeric nanocomposites. Ind Lubr Tribol 53(1):72–77. https://doi.org/10.1108/00368790110383993CrossRef

Sabarinathan P, Annamalai VE, Rajkumar K (2020) Optimization of process parameter in abrasive water jet machining of blue-fired grain-reinforced glass fiber polymer composite. Trends Manuf Eng Manag. https://doi.org/10.1007/978-981-15-4745-4_20CrossRef

Sanjay MR, Siengchin S, Jyotishkumar P, Jawaid M, Pruncu CI, Khan A (2019) A comprehensive review of techniques for natural fibers as reinforcement in composites: preparation, processing and characterization. Carbohydr Polym 207(1):108–121. https://doi.org/10.1016/j.carbpol.2018.11.083CrossRef

Sanjay MR, Siengchin S, Dhakal HN (2020) Green-composites: eco-friendly and sustainability. Appl Sci Eng Prog 13(3):183–184. https://doi.org/10.14416/j.asep.2020.06.001CrossRef

Sanjay MR, Siengchin S. Editorial corner—a personal view (2021) Exploring the applicability of natural fibers for the development of biocomposites. Exp Polym Lett 15(3):193. https://doi.org/10.3144/expresspolymlett.2021.17

Satapathy S, Kothapalli RVS (2017) Mechanical, dynamic mechanical and thermal properties of banana fiber/recycled high density polyethylene biocomposites filled with flyash cenospheres. J Polym Environ 26:200–213. https://doi.org/10.1007/s10924-017-0938-0CrossRef

Satapathy S, Kothapalli RVS (2018) Mechanical, dynamic mechanical and thermal properties of banana fiber/recycled high density polyethylene biocomposites filled with flyash cenospheres. J Polym Environ 26:200–213. https://doi.org/10.1007/s10924-017-0938-0CrossRef

Sathishkumar GK, Gautham G, Shankar GG, Rajkumar G, Karpagam R, Dhivya V, Zacharia G, Gopinath B, Karthik P, Charles MM (2021) Influence of lignite fly ash on the structural and mechanical properties of banana fiber containing epoxy polymer matrix composite. Polym Bull. https://doi.org/10.1007/s00289-020-03524-6CrossRef

Setty VKSN, Goud G, Chikkegowda SP, Sanjay MR, Siengchin S (2020a) Characterization of chemically treated limonia acidissima (wood apple) shell powder: physicochemical, thermal, and morphological properties. J Nat Fibe. https://doi.org/10.1080/15440478.2020.1853925CrossRef

Setty VKSN, Goud G, Sanjay MR, Siengchin S (2020b) Raw and chemically treated bio-waste filled (Limonia acidissima shell powder) vinyl ester composites: physical, mechanical, moisture absorption properties, and microstructure analysis. Vinyl Add Technol. https://doi.org/10.1002/vnl.21787CrossRef

Shivamurthy B, Bhat KU, Anandhan S (2013) Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites. Mater Des 44:136–143. https://doi.org/10.1016/j.matdes.2012.07.059CrossRef

Stelte W, Barsberg ST, Clemons C, Morais JPS, Rosa MF, Sanadi AR (2018) Coir fibers as valuable raw material for biofuel pellet production. Waste Biomass Valor. https://doi.org/10.1007/s12649-018-0362-2CrossRef

Sudheer M, Madhyastha NK, Amanna MK, Jonthan B, Jayaprakash KM (2013) Mechanical and abrasive wear behavior of metal sulphide lubricant filled epoxy composites. ISRN Polym Sci 242450:1–8. https://doi.org/10.1155/2013/242450CrossRef

Sumesh KR, Kavimani V, Rajeshkumar G, Indran S, Saikrishnan G (2021) Effect of banana, pineapple and coir fly ash filled with hybrid fiber epoxy based composites for mechanical and morphological study. J Mater Cycle Waste Manag. https://doi.org/10.1007/s10163-021-01196-6CrossRef

Sun T, Fan H, Wang Z, Liu X, Wu Z (2015) Modified nano Fe₂O₃-epoxy composite with enhanced mechanical properties. Mater Des 87:10–16. https://doi.org/10.1016/j.matdes.2015.07.177CrossRef

Sun X, Jia XJ, Li FY, Li JF, Zhang SG (2019) Effect of poly-methyltriethoxysilane on the waterproof property of starch/fiber composites with open cell structures. RSC Adv 9(34):19508–19517. https://doi.org/10.1039/c9ra03221eCrossRef

Taurozzi JS, Hackley VA, Wiesner MR (2012) Preparation of nanoparticle dispersions from powdered material using ultrasonic disruption. NIST—Spec. Publ. https://doi.org/10.6028/nist.sp.1200-2

Temuujin J, Surenjav E, Ruescher CH, Vahlbruch J (2019) Processing and uses of fly ash addressing radioactivity (critical review). Chemosph 216:866–882. https://doi.org/10.1016/j.chemosphere.2018.10.112CrossRef

Tsekmes IA, Morshuis PHF, Smit JJ, Kochelov R (2015) Enhancing the thermal and electrical performance of epoxy microcomposites with the addition of nanofillers. IEEE Electr Insul Mag 31(3):32–42. https://doi.org/10.1109/mei.2015.7089120CrossRef

Vinay SS, Sanjay MR, Siengchin S, Venkatesh CV (2020) Effect of Al₂O₃ nanofillers in basalt/epoxy composites: mechanical and tribological properties. Polym Compos. https://doi.org/10.1002/pc.25927CrossRef

Vinod A, Sanjay MR, Siengchin S, Jyotishkumar P (2020) Renewable and sustainable biobased materials: an assessment on biofibers, biofilms, biopolymers and biocomposites. J Clean Prod 258:120978. https://doi.org/10.1016/j.jclepro.2020.120978CrossRef

Wang Q, Xia H, Zhang C (2001) Preparation of polymer/inorganic nanoparticles composites through ultrasonic irradiation. J Appl Polym Sci 80(9):1478–1488. https://doi.org/10.1002/app.1239CrossRef

Wang S, Zhang C, Chen J (2014) Utilization of coal fly ash for the production of glass-ceramics with unique performances: a brief review. J Mater Sci Technol 30:1208–1212. https://doi.org/10.1016/j.jmst.2014.10.005CrossRef

Wang CC, Zhao YY, Ge HY, Qian RS (2016) Enhanced mechanical and thermal properties of short carbon fiber reinforced polypropylene composites by graphene oxide. Polym Compos 39:405–413. https://doi.org/10.1002/pc.23950CrossRef

Wolfe TA, Jewett TJ, Gaur RPS (2014) Powder synthesis 185–219

Wu H, Xiao D, Lu J, Li T, Zhang Z (2020) Preparation and properties of biocomposite films based on poly(vinyl alcohol) incorporated with eggshell powder as a biological filler. J Polym Environ 28(7):2020–2028. https://doi.org/10.1007/s10924-020-01747-2CrossRef

Xia H, Wang Q (2003) Preparation of conductive polyaniline/nanosilica particle composites through ultrasonic irradiation. J Appl Polym Sci 87(11):1811–1817. https://doi.org/10.1002/app.11627CrossRef

Xu LR, Bhamidipati V, Zhong WH, Li J, Lukehart CM, Lara-Curzio E, Liu KC, Lance MJ (2004) Mechanical property characterization of polymeric nanocomposite reinforced by graphitic nanofibers with reactive linkers. J Compos Mater 38(18):1563–1582. https://doi.org/10.1177/0021998304043758CrossRef

Yao ZT, Ji XS, Sarker PK, Tang JH, Ge LQ, Xia MS, Xi YQ (2015) A comprehensive review on the applications of coal fly ash. Earth Sci Rev 141:105–121. https://doi.org/10.1016/j.earscirev.2014.11.016CrossRef

Yashas GTG, Sanjay MR, Jyotishkumar P, Siengchin S (2019) Natural fibers as sustainable and renewable resource for development of eco-friendly composites: a comprehensive review. Front Mater 6:1–14. https://doi.org/10.3389/fmats.2019.00226CrossRef

Yorseng K, Sanjay MR, Tengsuthiwat J, Harikrishnan P, Jyotishkumar P, Siengchin S, Moure MM (2019) Information in United States Patents on works related to ‘Natural Fibers’: 2000–2018. Curr Mater Sci 12(1):4–76. https://doi.org/10.2174/1874464812666190515115020CrossRef

Yuan WJ, Cui JY, Xu SA (2016) Mechanical properties and interfacial interaction of modified calcium sulfate whisker/poly (vinyl chloride) composites. J Mater Sci Technol 32:1352–1360. https://doi.org/10.1016/j.jmst.2016.05.016CrossRef

Zhang J, Qi S (2014) Mechanical, thermal, and dielectric properties of aluminum nitride/glass fiber/epoxy resin composites. Polym Compos 35:381–385. https://doi.org/10.1002/pc.22671CrossRef

Zhang CW, Li FY, Li JF, Wang LM, Xie Q, Xu J, Chen S (2017a) A new biodegradable composite with open cell by combining modified starch and plant fibers. Mater Des 120:222–229. https://doi.org/10.1016/j.matdes.2017.02.027CrossRef

Zhang K, Feng Y, Wang F, Yang Z, Wang J (2017b) Two dimensional hexagonal boron nitride (2D-hBN): synthesis, properties and applications. J Mater Chem C 5:11992–12022. https://doi.org/10.1039/c7tc04300gCrossRef

Zhang CW, Li FY, Li JF, Li YL, Xu J, Xie Q (2018) Novel treatments for compatibility of plant fiber and starch by forming new hydrogen bonds. J Clean Prod 185:357–365. https://doi.org/10.1016/j.jclepro.2018.03.001CrossRef

Zhou Q, Wen J, Wu J, Ma W, Xu M, Wei K, Xu J (2019) Recovery and purification of metallic silicon from waste silicon slag in electromagnetic induction furnace by slag refining method. J Clean Prod 229:1335–1341. https://doi.org/10.1016/j.jclepro.2019.05.071CrossRef

Zunjarrao SC, Singh RP (2006) Characterization of the fracture behavior of epoxy reinforced with nanometer and micrometer sized aluminum particles. Compos Sci Technol 66(13):2296–2305. https://doi.org/10.1016/j.compscitech.2005.12.001CrossRef

Title: Effect of coir fiber and inorganic filler hybridization on Innegra fiber-reinforced epoxy polymer composites: physical and mechanical properties
Authors: H. M. Kavya
Saravana Bavan
B. Yogesha
M. R. Sanjay
Siengchin Suchart
Gorbatyuk Sergey
Publication date: 19-08-2021
Publisher: Springer Netherlands
Published in: Cellulose / Issue 15/2021
Print ISSN: 0969-0239
Electronic ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-021-04140-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Other articles of this Issue 15/2021

Modification of BiOBr with cellulose nanocrystals to improve the photocatalytic performance under visible light

Surface engineering of cellulose nanocrystals via SI-AGET ATRP of glycidyl methacrylate and ring-opening reaction for fabricating self-healing nanocomposite hydrogels

Metal-alkali catalytic valorization of lignocellulose towards aromatics and small molecular alcohols and acids in a holistic approach

The effect of sulfate half-ester groups on cellulose nanocrystal periodate oxidation

Non-productive binding of cellobiohydrolase i investigated by surface plasmon resonance spectroscopy

Functionalization, characterization and microbiological performance of new biocompatible cellulosic dressing grafted chitosan and Suaeda fruticosa polysaccharide extract