Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Material Cycles and Waste Management
Published in: Journal of Material Cycles and Waste Management 5/2020

12-05-2020 | ORIGINAL ARTICLE

Effect of mineral additives and two-stage mixing on the performance of recycled aggregate concrete

Authors: Rayhan Md. Faysal, Mohammed Maslehuddin, Mohammed Shameem, Shamsad Ahmad, Saheed Kolawole Adekunle

Published in: Journal of Material Cycles and Waste Management | Issue 5/2020

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

There is an increasing tendency to use recycled aggregate to produce concrete due to diminishing sources of natural aggregate. The properties of recycled aggregate concrete (RAC) are inferior to that of normal aggregate concrete. Several strategies including the use of supplementary cementitious materials (SCMs) are adopted to improve the properties of RAC. The two-stage mixing approach (TSMA) is also used as an improvement strategy. The present study was aimed to examine the individual and combined effects of using SCMs and TSMA on the fresh and hardened properties of RAC. Three SCMs, namely, fly ash, ground granulated blast furnace slag, and silica fume were used with and without TSMA. The experimental data indicated the beneficial effect of SCMs and TSMA on workability, strength, shrinkage, and durability of RAC. Further, the cost per unit strength of the RAC with SCMs and TSMA was less than that of RAC without any treatment. The use of developed RAC will lead to technical, economic, and environmental benefits.
previous article Coating mortars based on mining and industrial residues
next article The effect of nanomaterials as anti-stripping additives on the moisture sensitivity of glasphalt

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Ismail S, Hoe KW, Ramli M (2013) Sustainable aggregates: the potential and challenge for natural resources conservation. Procedia Soc Behav Sci 101:100–109
2.
Pandurangan K, Dayanithy A, Om Prakash S (2016) Influence of treatment methods on the bond strength of recycled aggregate concrete. Constr Build Mater 120:212–221
3.
Mei Mah C, Fujiwara T, Siong Ho C (2018) Environmental impacts of construction and demolition waste management alternatives. Environ Impacts Constr Demolition Waste Manage Altern. 63:343–348
4.
Etxeberria M, Marí AR, Vázquez E (2007) Recycled aggregate concrete as structural material. Mater Struct 40(5):529–541
5.
Corinaldesi V (2010) Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates. Constr Build Mater 24(9):1616–1620
6.
Silva RV, de Brito J, Dhir RK (2015) Tensile strength behaviour of recycled aggregate concrete. Constr Build Mater 83:108–118
7.
Qasrawi H, Marie I, Tantawi H (2012) Use of recycled concrete rubbles as coarse aggregate in concrete. In: Proc. 5th Jordanian Int. Civ. Eng. Conf
8.
Katz A (2003) Properties of concrete made with recycled aggregate from partially hydrated old concrete. Cem Concr Res 33(5):703–711
9.
Butler L, West JS, Tighe SL (2011) The effect of recycled concrete aggregate properties on the bond strength between RCA concrete and steel reinforcement. Cem Concr Res 41(10):1037–1049
10.
Yang C, Hs C, Ashour AF (2008) Influence of type and replacement level of recycled aggregates on concrete properties. ACI Mater J 105(3):289–296
11.
Silva RV, de Brito J, Dhir RK (2016) Establishing a relationship between modulus of elasticity and compressive strength of recycled aggregate concrete. J Clean Prod 112:2171–2186
12.
Medina C, Zhu W, Howind T, Sánchez de Rojas MI, Frías M (2014) Influence of mixed recycled aggregate on the physical—mechanical properties of recycled concrete. J Clean Prod 68:216–225
13.
Kim Y, Hanif A, Kazmi SMS, Munir MJ, Park C (2018) Properties enhancement of recycled aggregate concrete through pretreatment of coarse aggregates—comparative assessment of assorted techniques. J Clean Prod 191:339–349
14.
Kim H-S, Kim B, Kim K-S, Kim J-M (2017) Quality improvement of recycled aggregates using the acid treatment method and the strength characteristics of the resulting mortar. J Mater Cycles Waste Manag 19(2):968–976
15.
Matias D, de Brito J, Rosa A, Pedro D (2013) Mechanical properties of concrete produced with recycled coarse aggregates—Influence of the use of superplasticizers. Constr Build Mater 44:101–109
16.
Bui NK, Satomi T, Takahashi H (2018) Mechanical properties of concrete containing 100% treated coarse recycled concrete aggregate. Constr Build Mater 163:496–507
17.
Zhao Z, Wang S, Lu L, Gong C (2013) Evaluation of pre-coated recycled aggregate for concrete and mortar. Constr Build Mater 43:191–196
18.
Kareem AI, Nikraz H, Asadi H (2018) Evaluation of the double coated recycled concrete aggregates for hot mix asphalt. Constr Build Mater 172:544–552
19.
Kumar SG, Minocha AK (2018) Studies on thermo-chemical treatment of recycled concrete fine aggregates for use in concrete. J Mater Cycles Waste Manag 20(1):469–480
20.
Bui NK, Satomi T, Takahashi H (2017) Improvement of mechanical properties of recycled aggregate concrete basing on a new combination method between recycled aggregate and natural aggregate. Constr Build Mater 148:376–385
21.
Pradhan S, Kumar S, Barai SV (2017) Recycled aggregate concrete: particle packing method (PPM) of mix design approach. Constr Build Mater 152:269–284
22.
Tam VWY, Gao XF, Tam CM (2005) Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach. Cem Concr Res 35(6):1195–1203
23.
Li W, Xiao J, Sun Z, Kawashima S, Shah SP (2012) Interfacial transition zones in recycled aggregate concrete with different mixing approaches. Constr Build Mater 35:1045–1055
24.
Kisku N, Joshi H, Ansari M, Panda SK, Nayak S, Dutta SC (2017) A critical review and assessment for usage of recycled aggregate as sustainable construction material. Constr Build Mater 131:721–740
25.
Liang Y, Ye Z, Vernerey F, Xi Y (2015) Development of processing methods to improve strength of concrete with 100% recycled coarse aggregate. J Mater Civ Eng 27(5):04014163
26.
Junak J, Sicakova A (2017) Effect of surface modifications of recycled concrete aggregate on concrete properties. Buildings 8(1):2
27.
Nuaklong P, Sata V, Wongsa A, Srinavin K, Chindaprasirt P (2018) Recycled aggregate high calcium fly ash geopolymer concrete with inclusion of OPC and nano-SiO2. Constr Build Mater 174:244–252
28.
Zhang H, Zhao Y, Meng T, Shah SP (2016) Surface treatment on recycled coarse aggregates with nanomaterials. J Mater Civ Eng 28(2):04015094
29.
Shi C, Wu Z, Cao Z, Ling TC, Zheng J (2018) Performance of mortar prepared with recycled concrete aggregate enhanced by CO2 and pozzolan slurry. Cem Concr Compos 86:130–138
30.
Kou SC, Zhan B, Poon CS (2014) Use of a CO2 curing step to improve the properties of concrete prepared with recycled aggregates. Cem Concr Compos 45:22–28
31.
Zhan BJ, Xuan DX, Poon CS (2018) Enhancement of recycled aggregate properties by accelerated CO2 curing coupled with limewater soaking process. Cem Concr Compos 89:230–237
32.
Kou S, Poon C, Agrela F (2011) Comparisons of natural and recycled aggregate concretes prepared with the addition of different mineral admixtures. Cem Concr Compos 33(8):788–795
33.
Pedro D, de Brito J, Evangelista L (2017) Mechanical characterization of high performance concrete prepared with recycled aggregates and silica fume from precast industry. J Clean Prod 164:939–949
34.
Çakır Ö (2014) Experimental analysis of properties of recycled coarse aggregate (RCA) concrete with mineral additives. Constr Build Mater 68:17–25
35.
Maier PL, Durham SA (2012) Beneficial use of recycled materials in concrete mixtures. Constr Build Mater 29:428–437
36.
Majhi RK, Nayak AN (2019) Bond, durability and microstructural characteristics of ground granulated blast furnace slag based recycled aggregate concrete. Constr Build Mater 212:578–595
37.
Ann KY, Moon HY, Kim YB, Ryou J (2008) Durability of recycled aggregate concrete using pozzolanic materials. Waste Manag 28(6):993–999
38.
Kou SC, Poon C-S (2013) Long-term mechanical and durability properties of recycled aggregate concrete prepared with the incorporation of fly ash. Cem Concr Compos 37:12–19
39.
Berndt ML (2009) Properties of sustainable concrete containing fly ash, slag and recycled concrete aggregate. Constr Build Mater 23(7):2606–2613
40.
Akhtar A, Sarmah AK (2018) Strength improvement of recycled aggregate concrete through silicon rich char derived from organic waste. J Clean Prod 196:411–423
41.
Senaratne S, Gerace D, Mirza O, Tam VWY, Kang W-H (2016) The costs and benefits of combining recycled aggregate with steel fibres as a sustainable, structural material. J Clean Prod 112:2318–2327
42.
Xie J, Guo Y, Liu L, Xie Z (2015) Compressive and flexural behaviours of a new steel-fibre-reinforced recycled aggregate concrete with crumb rubber. Constr Build Mater 79:263–272
43.
Xie J, Fang C, Lu Z, Li Z, Li L (2018) Effects of the addition of silica fume and rubber particles on the compressive behaviour of recycled aggregate concrete with steel fibres. J Clean Prod 197:656–667
44.
Rajhans P, Panda SK, Nayak S (2018) Sustainable self compacting concrete from C&D waste by improving the microstructures of concrete ITZ. Constr Build Mater 163:557–570
45.
Rajhans P, Panda SK, Nayak S (2018) Sustainability on durability of self compacting concrete from C&D waste by improving porosity and hydrated compounds: a microstructural investigation. Constr Build Mater 174:559–575
46.
Singh LP, Bisht V, Aswathy MS, Chaurasia L, Gupta S (2018) Studies on performance enhancement of recycled aggregate by incorporating bio and nano materials. Constr Build Mater 181:217–226
47.
Wang J, Vandevyvere B, Vanhessche S, Schoon J, Boon N, De Belie N (2017) Microbial carbonate precipitation for the improvement of quality of recycled aggregates. J Clean Prod 156:355–366
48.
Grabiec AM, Klama J, Zawal D, Krupa D (2012) Modification of recycled concrete aggregate by calcium carbonate biodeposition. Constr Build Mater 34:145–150
49.
Zaben AH (2017) Mechanical properties of green recycled aggregate concrete using construction and demolition waste in Saudi Arabia. M.S. thesis, King Fahd University of Petrolium and Minerals, Dhahran
50.
Ragab Mohamed A, Hansen W (1999) Micromechanical modeling of crack-aggregate interaction in concrete materials. Cem Concr Compos 21(5–6):349–359
51.
Zakaria M, Cabrera JG (1996) Performance and durability of concrete made with demolition waste and artificial fly ash-clay aggregates. Waste Manag 16(1–3):151–158
52.
Oh BH, Cha SW, Jang BS, Jang SY (2002) Development of high-performance concrete having high resistance to chloride penetration. Nucl Eng Des 212(1–3):221–231
53.
Choi MS, Park SB, Kang S-T (2015) Effect of the mineral admixtures on pipe flow of pumped concrete. J Adv Concr Technol 13(11):489–499
54.
55.
Li G, Xie H, Xiong G (2001) Transition zone studies of new-to-old concrete with different binders. Cem Concr Compos 23(4–5):381–387
56.
Thomas M (2007) Optimizing the use of fly ash in concrete, vol 5420. Portland cement association, Skokie
57.
Khan SU, Nuruddin MF, Ayub T, Shafiq N (2014) Effects of different mineral admixtures on the properties of fresh concrete. Sci World J 2014:1–11
58.
Zhang M-H, Malhotra VM (1996) High-performance concrete incorporating rice husk ash as a supplementary cementing material. ACI Mater J 93:629–636
59.
Newman J, Choo B (2003) Advanced concrete technology: processes, 3rd edn. Butterworth-Heinemann, Oxford
60.
Ollivier JP, Maso JC, Bourdette B (1995) Interfacial transition zone in concrete. Adv Cem Based Mater 2(1):30–38
61.
Reinhardt HW (2013) Factors affecting the tensile properties of concrete. Understanding the tensile properties of concrete. Elsevier, Amsterdam, pp 19–51
62.
Pavía S, Condren E (2008) A study of the durability of OPC vs. GGBS concrete on exposure to silage effluent. J Mater Civ Eng 20(4):313–320
63.
Çakır Ö, Sofyanlı ÖÖ (2015) Influence of silica fume on mechanical and physical properties of recycled aggregate concrete. HBRC J 11(2):157–166
64.
Nath P, Sarker P (2011) Effect of fly ash on the durability properties of high strength concrete. Procedia Eng 14:1149–1156
65.
Ramezanianpour AA, Malhotra VM (1995) Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume. Cem Concr Compos 17(2):125–133
66.
Hooton P, Pun RD, Kojundic P, Fidjestol T (1997) Influence of silica fume on chloride resistance of concrete. In: International Symposium of High Performance Concrete. pp. 245–249
67.
Tam VWY, Tam CM (2007) Assessment of durability of recycled aggregate concrete produced by two-stage mixing approach. J Mater Sci 42(10):3592–3602
68.
Sarkar S, Halder A, Bishnoi S (2013) Shrinkage in Concretes Containing Fly Ash. In: UKIERI Concrete Congress
69.
Collins F, Sanjayan J (2000) Effect of pore size distribution on drying shrinking of alkali-activated slag concrete. Cem Concr Res 30(9):1401–1406
70.
Ayub T, Khan SU, Memon FA (2014) Mechanical characteristics of hardened concrete with different mineral admixtures: a review. Sci World J 2014:875082
71.
Ghosh RS, Timusk J (1981) Creep of fly ash concrete. ACI J Proc 78(5):351–357
72.
Almusallam TH (1995) Effect of fly ash on the mechanical properties of concrete. In: 4th Saudi Engineering Conference. pp. 187–192
73.
Mazloom M, Ramezanianpour AA, Brooks JJ (2004) Effect of silica fume on mechanical properties of high-strength concrete. Cem Concr Compos 26(4):347–357
74.
Chung DDLL (2002) Review: Improving cement-based materials by using silica fume. J Mater Sci 37(4):673–682
75.
Neville AM (2011) Concretes with particular properties. In: Properties of Concrete, 5th ed., Harlow. p. 666
76.
Khan MI, Siddique R (2011) Utilization of silica fume in concrete: review of durability properties. Resour Conserv Recycl 57:30–35
77.
Sun W, Zhang Y, Liu S, Zhang Y (2004) The influence of mineral admixtures on resistance to corrosion of steel bars in green high-performance concrete. Cem Concr Res 34(10):1781–1785
78.
Medeiros MHF, Rocha FC, Medeiros-JUNIOR RA, Helene P (2017) Corrosion potential: influence of moisture, water-cement ratio, chloride content and concrete cover. Rev IBRACON Estruturas e Mater 10(4):864–885
Metadata
Title
Effect of mineral additives and two-stage mixing on the performance of recycled aggregate concrete
Authors
Rayhan Md. Faysal
Mohammed Maslehuddin
Mohammed Shameem
Shamsad Ahmad
Saheed Kolawole Adekunle
Publication date
12-05-2020
Publisher
Springer Japan
Published in
Journal of Material Cycles and Waste Management / Issue 5/2020
Print ISSN: 1438-4957
Electronic ISSN: 1611-8227
DOI
https://doi.org/10.1007/s10163-020-01048-9

Other articles of this Issue 5/2020

Journal of Material Cycles and Waste Management 5/2020 Go to the issue

ORIGINAL ARTICLE

The municipal solid waste generation distribution prediction system based on FIG–GA-SVR model

ORIGINAL ARTICLE

Preparation and properties of fly ash-based geopolymer concrete with alkaline waste water obtained from foundry sand regeneration process

ORIGINAL ARTICLE

Visualization of solid distribution with heterogeneity inside fixed bed gasifier

ORIGINAL ARTICLE

Enhanced syntrophic metabolism of propionate and butyrate via nickel-containing activated carbon during anaerobic digestion

REVIEW

Rethinking sustainability: a review of Liberia’s municipal solid waste management systems, status, and challenges

ORIGINAL ARTICLE

Synthesis and thermal decomposition of alkoxy-, hydroxy-derivatives of Sovol polychlorbiphenyls technical mixture