Top

Journal of Materials Engineering and Performance

Published in:

20-12-2016

Effect of Multipass Friction Stir Processing on Mechanical and Corrosion Behavior of 2507 Super Duplex Stainless Steel

Authors: M. K. Mishra, G. Gunasekaran, A. G. Rao, B. P. Kashyap, N. Prabhu

Published in: Journal of Materials Engineering and Performance | Issue 2/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The microstructure, mechanical properties, and corrosion behavior of 2507 super duplex stainless steel after multipass friction stir processing (FSP) were examined. A significant refinement in grain size of both ferrite and austenite was observed in stir zone resulting in improved yield and tensile strength. Electrochemical impedance spectroscopy and anodic polarization studies in 3.5 wt.% NaCl solution showed nobler corrosion characteristics with increasing number of FSP passes. This was evident from the decrease in corrosion current density, decrease in passive current density, and increase in polarization resistance. Also, the decrease in density of defects, based on Mott-Schottky analysis, further confirms the improvement in corrosion resistance of 2507 super duplex stainless steel after multipass FSP.

previous article Fused Deposition Technique for Continuous Fiber Reinforced Thermoplastic

next article Molten Pool Behavior and Mechanical Properties of Pulsed Current Double-Sided Synchronization GTA Welded Fe-18Cr-17Mn-Ni-N

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

A.R. Akisanya, U. Obi, and N.C. Renton, Effect of Aging on Phase Evolution and Mechanical Properties of a High Tungsten Super-Duplex Stainless Steel, Mater. Sci. Eng. A, 2012, 535, p 281–289CrossRef

B. Deng, Y.M. Jiang, J. Gao, and J. Li, Effect of Annealing Treatment on Microstructure Evolution and the Associated Corrosion Behavior of a Super-Duplex Stainless Steel, J. Alloys Compd., 2010, 493, p 461–464CrossRef

B. Deng, Y. Jiang, J. Gong, C. Zhong, J. Gao, and J. Li, Critical Pitting and Repassivation Temperatures for Duplex Stainless Steel in Chloride Solutions, Electrochim. Acta, 2008, 53, p 5220–5225CrossRef

K.D. Ralston, N. Birbilis, and C.H.J. Davies, Revealing the Relationship Between Grain Size and Corrosion Rate of Metals, Scr. Mater., 2010, 63, p 1201–1204CrossRef

B.P. Kashyap, Enhancement of Flow Properties by Grain Refinement and Other Structural Modification, Procedia Eng., 2014, 86, p 18–26CrossRef

G.M. Xie, Z.Y. Ma, L. Geng, and R.S. Chen, Microstructural Evolution and Mechanical Properties of Friction Stir Welded Mg-Zn-Y-Zr Alloy, Mater. Sci. Eng. A, 2007, 471, p 63–68CrossRef

H. Sarlak, M. Atapour, and M. Esmailzadeh, Corrosion Behavior of Friction stir Welded Lean Duplex Stainless Steel, Mater. Des., 2015, 66, p 209–216CrossRef

A.G. Rao, V.A. Katkar, G. Gunasekaran, V.P. Deshmukh, N. Prabhu, and B.P. Kashyap, Effect of Multipass Friction Stir Processing on Corrosion Resistance of Hypereutectic Al-30Si Alloy, Corros. Sci., 2014, 83, p 198–208CrossRef

R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng., R, 2005, 50, p 1–78CrossRef

10.

A.G. Rao, B.R.K. Rao, V.P. Deshmukh, A.K. Shah, and B.P. Kashyap, Microstructural Refinement of a Cast Hypereutectic Al-30Si Alloy by Friction Stir Processing, Mater. Lett., 2009, 63, p 2628–2630CrossRef

11.

S. Mironov, Y.S. Sato, and H. Kokawa, Microstructural Evolution During Friction Stir-Processing of Pure Iron, Acta Mater., 2008, 56, p 2602–2614CrossRef

12.

Z.Y. Ma, R.S. Mishra, M.W. Mahoney, and R. Grimes, High Strain Rate Superplasticity in Friction Stir Processed Al-Mg-Zr Alloy, Mater. Sci. Eng. A, 2003, 351, p 148–153CrossRef

13.

Z.Y. Ma, S.R. Sharma, R.S. Mishra, and M.W. Mahoney, Microstructural Modification of Cast Aluminum Alloys via Friction Stir Processing, Mater. Sci. Forum, 2003, 426–432, p 2891–2896CrossRef

14.

Z.Y. Ma, R.S. Mishra, and M.W. Mahoney, Superplastic Deformation Behaviour of Friction Stir Processed 7075Al Alloy, Acta Mater., 2002, 50, p 4419–4430CrossRef

15.

Y. Li, L.E. Murr, and J.C. McClure, Solid-State Flow Visualization in the Friction-Stir Welding of 2024 Al to 6061 Al, Scr. Mater., 1999, 40, p 1041–1046CrossRef

16.

C.G. Rhodes, M.W. Mahoney, W.H. Bingal, and M. Calabrese, Fine-Grain Evolution in Friction-Stir Processed 7050 Aluminum, Scr. Mater., 2003, 48, p 1451–1455CrossRef

17.

H.G. Salem, A.P. Reynolds, and J.S. Lyons, Microstructure and Retention of Superplasticity of Friction Stir Welded Superplastic 2095 sheet, Scr. Mater., 2002, 46, p 337–342CrossRef

18.

J.Q. Su, T.W. Nelson, R. Mishra, and M. Mahoney, Microstructural Investigation of Friction Stir Welded 7050-T651 Aluminium, Acta Mater., 2003, 51, p 713–729CrossRef

19.

I. Charit and R.S. Mishra, High Strain Rate Superplasticity in a Commercial 2024 Al Alloy via Friction Stir Processing, Mater. Sci. Eng., A, 2003, 359, p 290–296CrossRef

20.

Y.J. Kwon, I. Shigematsu, and N. Saito, Mechanical Properties of Fine-Grained Aluminum Alloy Produced by Friction Stir Process, Scr. Mater., 2003, 49, p 785–789CrossRef

21.

P. Xue, B.L. Xiao, Q. Zhang, and Z.Y. Ma, Achieving Friction Stir Welded Pure Copper Joints with Nearly Equal Strength to the Parent Metal via Additional Rapid Cooling, Scr. Mater., 2011, 64, p 1051–1054CrossRef

22.

B.W. Ahn, D.H. Choi, D.J. Kim, and S.B. Jung, Microstructures and Properties of Friction Stir Welded 409L Stainless Steel using a Si₃N₄ Tool, Mater. Sci. Eng., A, 2012, 532, p 476–479CrossRef

23.

M. Atapour, H. Sarlak, and M. Esmailzadeh, Pitting Corrosion Susceptibility of Friction Stir Welded Lean Duplex Stainless Steel Joints, Int. J. Adv. Manuf. Technol., 2016, 83, p 721–728CrossRef

24.

M.B. Bilgin and C. Meran, The Effect of Tool Rotational and Traverse Speed on Friction Stir Weldability of AISI, 430 Ferritic Stainless Steels, Mater. Des., 2012, 33, p 376–383CrossRef

25.

H. Cho, H.N. Han, S. Hong, J. Park, Y. Kwon, S. Kim, and R.J. Steel, Microstructural Analysis of Friction Stir Welded Ferritic Stainless Steel, Mater. Sci. Eng., A, 2011, 528, p 2889–2894CrossRef

26.

J.D. Escobar, E. Velasquez, T.F.A. Santos, A.J. Ramirez, and D. Lopez, Improvement of Cavitation Erosion Resistance of a Duplex Stainless Steel Through Friction Stir Processing (FSP), Wear, 2013, 297, p 998–1005CrossRef

27.

M. Esmailzadeh, M. Shamanian, A. Kermanpur, and T. Saeid, Microstructure and Mechanical Properties of Friction Stir Welded Lean Duplex Stainless Steel, Mater. Sci. Eng. A, 2013, 561, p 486–491CrossRef

28.

H. Fujii, L. Cui, N. Tsuji, M. Maeda, K. Nakata, and K. Nogi, Friction Stir Welding of Carbon Steels, Mater. Sci. Eng., A, 2006, 429, p 50–57CrossRef

29.

M. Hajian, A. Abdollah-zadeh, S.S. Rezaei-Nejad, H. Assadi, S.M.M. Hadavi, K. Chung, and M. Shokouhimehr, Microstructure and Mechanical Properties of Friction Stir Processed AISI, 316L Stainless Steel, Mater. Des., 2015, 67, p 82–94CrossRef

30.

J. Han, H. Li, Z. Zhu, F. Barbaro, L. Jiang, H. Xu, and L. Ma, Microstructure and Mechanical Properties of Friction Stir Welded 18Cr-2Mo Ferritic Stainless Steel Thick Plate, Mater. Des., 2014, 63, p 238–246CrossRef

31.

A.K. Lakshminarayanan and V. Balasubramanian, An Assessment of Microstructure, Hardness, Tensile and Impact Strength of Friction Stir Welded Ferritic Stainless Steel Joints, Mater. Des., 2010, 31, p 4592–4600CrossRef

32.

S.D. Meshram, G.M. Reddy, and S. Pandey, Friction Stir Welding of Maraging Steel (Grade-250), Mater. Des., 2013, 49, p 58–64CrossRef

33.

T. Saeid, A. Abdollah-zadeh, H. Assadi, and F.M. Ghaini, Effect of Friction Stir Welding Speed on the Microstructure and Mechanical Properties of a Duplex Stainless Steel, Mater. Sci. Eng., A, 2008, 496, p 262–268CrossRef

34.

Y.S. Sato, T.W. Nelson, C.J. Sterling, R.J. Steel, and C.O. Pettersson, Microstructure and Mechanical Properties of Friction Stir Welded SAF 2507 Super Duplex Stainless Steel, Mater. Sci. Eng., A, 2005, 397, p 376–384CrossRef

35.

D.M. Sekban, O. Saray, S.M. Aktarer, G. Purcek, and Z.Y. Ma, Microstructure, Mechanical Properties and Formability of Friction Stir Processed Interstitial-Free Steel, Mater. Sci. Eng., A, 2015, 642, p 57–64CrossRef

36.

M. Magnani, M. Terada, A.O. Lino, V.P. Tallo, E.B. Fonseca, T.F.A. Santos, and A.J. Ramirez, Microstructural and Electrochemical Characterization of Friction Stir Welded Duplex Stainless Steels, Int. J. Electrochem. Sci., 2014, 9, p 2966–2977

37.

B. Li, Y. Shen, W. Hu, and L. Luo, Surface Modification of Ti-6Al-4V Alloy via Friction-Stir Processing: Microstructure Evolution and Dry Sliding Wear Performance, Surf. Coatings Technol., 2014, 239, p 160–170CrossRef

38.

T.F.A. Santos, E.A.T. Lopez, E.B. Fonseca, and A.J. Ramirez, Friction Stir Welding of Duplex and Superduplex Stainless Steels and Some Aspects of Microstructural Characterization and Mechanical Performance, Mater. Res., 2016, 19, p 117–131CrossRef

39.

T. Saeid, A. Abdollah-zadeh, T. Shibayanagi, K. Ikeuchi, and H. Assadi, On the Formation of Grain Structure During Friction Stir Welding of Duplex Stainless Steel, Mater. Sci. Eng., A, 2010, 527, p 6484–6488CrossRef

40.

M.K. Mishra, A.G. Rao, R. Sarkar, B.P. Kashyap, and N. Prabhu, Effect of preaging Deformation on Aging Characteristics of 2507 Super Duplex Stainless Steel, J. Mater. Eng. Perform., 2016, 25, p 374–381CrossRef

41.

R. Badji, N. Kherrouba, B. Mehdi, B. Cheniti, M. Bouabdallah, C. Kahloun, and B. Bacroix, Precipitation Kinetics and Mechanical Behavior in a Solution Treated and Aged Dual Phase Stainless Steel, Mater. Chem. Phys., 2014, 148, p 664–672CrossRef

42.

B. Deng, Z. Wang, Y. Jiang, H. Wang, J. Gao, and J. Li, Evaluation of Localized Corrosion in Duplex Stainless Steel Aged at 850°C with Critical Pitting Temperature Measurement, Electrochim. Acta, 2009, 54, p 2790–2794CrossRef

43.

M. Martins and L.R.N. Forti, Effect of Aging on Impact Properties of ASTM A890 Grade 1C Super Duplex Stainless Steel, Mater. Charact., 2008, 59, p 162–166CrossRef

44.

S. Jeon, S. Kim, S. Kim, M. Choi, and Y. Park, Effects of Solution-Annealing Temperature on the Precipitation of Secondary Phases and the Associated Pitting Corrosion Resistance in Hyper Duplex Stainless Steel, Mater. Trans., 2013, 54, p 1473–1479CrossRef

45.

T.H. Chen and J.R. Yang, Effects of solution treatment and Continuous Cooling on σ-phase Precipitation in a 2205 Duplex Stainless Steel, Mater. Sci. Eng. A, 2001, 311, p 28–41CrossRef

46.

A. Fattah-alhosseini and S. Vafaeian, Comparison of Electrochemical Behavior Between Coarse-Grained and Fine-Grained AISI, 430 Ferritic Stainless Steel by Mott-Schottky Analysis and EIS Measurements, J. Alloys Compd., 2015, 639, p 301–307CrossRef

47.

E.C. Souza, S.M. Rossitti, and J.M.D.A. Rollo, Influence Of Chloride Ion Concentration and Temperature on the Electrochemical Properties of Passive Films Formed on a Superduplex Stainless Steel, Mater. Charact., 2010, 61, p 240–244CrossRef

48.

L. Wang, B. Kang, N. Gao, X. Du, L. Jia, and J. Sun, Corrosion Behaviour of Austenitic Stainless Steel as a Function of Methanol Concentration for Direct Methanol Fuel Cell Bipolar Plate, J. Power Sources, 2014, 253, p 332–341CrossRef

49.

V.A. Katkar, G. Gunasekaran, A.G. Rao, and P.M. Koli, Effect of the Reinforced Boron Carbide Particulate Content of AA6061 Alloy on Formation of the Passive Film in Seawater, Corros. Sci., 2011, 53, p 2700–2712CrossRef

50.

A. Fattah-alhosseini, M.A. Golozar, A. Saatchi, and K. Raeissi, Effect of Solution Concentration on Semiconducting Properties of Passive Films Formed on Austenitic Stainless Steels, Corros. Sci., 2010, 52, p 205–209CrossRef

51.

J. Amri, T. Souier, B. Malki, and B. Baroux, Effect of the Final Annealing of Cold Rolled Stainless Steels Sheets on the Electronic Properties and Pit Nucleation Resistance of Passive Films, Corros. Sci., 2008, 50, p 431–435CrossRef

52.

S. Fujimoto and H. Tsuchiya, Semiconductor Properties and Protective Role of Passive Films of Iron Base Alloys, Corros. Sci., 2007, 49, p 195–202CrossRef

53.

A.M. Schmidt, D.S. Azambuja, and E.M.A. Martini, Semiconductive Properties of Titanium Anodic Oxide Films in McIlvaine Buffer Solution, Corros. Sci., 2006, 48, p 2901–2912CrossRef

54.

H. Luo, C.F. Dong, X.Q. Cheng, K. Xiao, and X.G. Li, Electrochemical Behavior of 2205 Duplex Stainless Steel in NaCl Solution with Different Chromate Contents, J. Mater. Eng. Perform., 2012, 21, p 1283–1291CrossRef

55.

S.H.C. Park, Y.S. Sato, H. Kokawa, K. Okamoto, S. Hirano, and M. Inagaki, Microstructural Characterisation of Stir Zone Containing Residual Ferrite in Friction Stir Welded 304 Austenitic Stainless Steel, Sci. Technol. Weld. Join., 2005, 10, p 550–556CrossRef

56.

L. Commin, M. Dumont, J.-E. Masse, and L. Barrallier, Friction Stir Welding of AZ31 Magnesium Alloy Rolled Sheets: Influence of Processing Parameters, Acta Mater., 2009, 57, p 326–334CrossRef

57.

M. Yuqing, K. Liming, L. Fencheng, C. Yuhua, and X. Li, Investigations on Temperature Distribution, Microstructure Evolution, and Property Variations Along Thickness in Friction Stir Welded Joints for Thick AA7075-T6 Plates, Int. J. Adv. Manuf. Technol., 2016, 86, p 141–154CrossRef

58.

S. Xu and X. Deng, A Study of Texture Patterns in Friction Stir Welds, Acta Mater., 2008, 56, p 1326–1341CrossRef

59.

X. Li, J.L. Li, Z.X. Liao, F. Jin, F.S. Zhang, and J.T. Xiong, Asymmetric Microstructure and Fracture Behaviour of Friction Stir Welded Joints of 2024 Aluminium Alloy Under Cyclical Load, Sci. Technol. Weld. Join., 2016, 21, p 515–522CrossRef

60.

A. Momeni, S. Kazemi, and A. Bahrani, Hot Deformation Behavior of Microstructural Constituents in a Duplex Stainless Steel During High-Temperature Straining, Int. J. Miner. Metall. Mater., 2013, 20, p 953–960CrossRef

61.

L. Duprez, B.C.D. Cooman, and N. Akdut, Flow Stress and Ductility of Duplex Stainless Steel During High-Temperature Torsion Deformation, Metall. Mater. Trans. A, 2002, 33, p 1931–1938CrossRef

62.

K. Migiakis and G.D. Papadimitriou, Effect of Nitrogen and Nickel on the Microstructure and Mechanical Properties of Plasma Welded UNS S32760 Super-Duplex Stainless Steels, J. Mater. Sci., 2009, 44, p 6372–6383CrossRef

63.

C.H. Hsu and F. Mansfeld, Technical Note: Concerning the Conversion of the Constant Phase Element Parameter Y0 into a Capacitance, Corros., 2001, 57, p 747–748CrossRef

64.

N. Anselmo, J.E. May, N.A. Mariano, P.A.P. Nascente, and S.E. Kuri, Corrosion Behavior of Supermartensitic Stainless Steel in Aerated and CO₂-Saturated Synthetic Seawater, Mater. Sci. Eng. A, 2006, 428, p 73–79CrossRef

65.

L. Jinlong and L. Hongyun, Comparison of Corrosion Properties of Passive Films Formed on Phase Reversion Induced Nano/Ultrafine-Grained 321 Stainless Steel, Appl. Surf. Sci., 2013, 280, p 124–131CrossRef

66.

R.K. Gupta, R.K.S. Raman, and C.C. Koch, Electrochemical Characteristics of Nano and Microcrystalline Fe-Cr Alloys, J. Mater. Sci., 2012, 47, p 6118–6124CrossRef

67.

S. Qian, R.C. Newman, and R.A. Cottis, Validation of a Percolation Model for Passivation of Fe-Cr Alloys: Two-Dimensional Computer Simulations, J. Electrochem. Soc., 1990, 137, p 435–439CrossRef

68.

B.O. Elfström, The Effect of Chloride Ions on Passive Layers on Stainless Steels, Mater. Sci. Eng., 1980, 42, p 173–180CrossRef

69.

G.D. Sulka, V. Moshchalkov, G. Borghs, and J.P. Celis, Electrochemical Impedance Spectroscopic Study of Barrier Layer Thinning in Nanostructured Aluminium, J. Appl. Electrochem., 2007, 37, p 789–797CrossRef

70.

L. Jinlong and L. Hongyun, Comparison of Corrosion Behavior Between Coarse Grained and Nano/Ultrafine Grained 304 Stainless Steel by EWF, XPS and EIS, J. Nucl. Mater., 2014, 452, p 469–473CrossRef

71.

B. Zhang, Y. Li, and F. Wang, Observations of Anomalies in the Anodic Behaviour of Microcrystalline Aluminum, Corros. Sci., 2010, 52, p 2612–2615CrossRef

Title: Effect of Multipass Friction Stir Processing on Mechanical and Corrosion Behavior of 2507 Super Duplex Stainless Steel
Authors: M. K. Mishra
G. Gunasekaran
A. G. Rao
B. P. Kashyap
N. Prabhu
Publication date: 20-12-2016
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 2/2017
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-016-2470-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2017

Drop Weight Impact Behavior of Al-Si-Cu Alloy Foam-Filled Thin-Walled Steel Pipe Fabricated by Friction Stir Back Extrusion

Fused Deposition Technique for Continuous Fiber Reinforced Thermoplastic

Isothermal Transformation of a Commercial Super-Bainitic Steel: Part I Microstructural Characterization and Hardness

Study on Microstructures and Properties of Porous TiC Ceramics Fabricated by Powder Metallurgy

Structural Performance of Inconel 625 Superalloy Brazed Joints

Effect of Traverse and Rotational Speeds on the Tensile Behavior of the Underwater Dissimilar Friction Stir Welded Aluminum Alloys

Premium Partners