Top

Cellulose

Published in:

11-03-2023 | Original Research

Effect of plant fiber characteristics on mechanical properties of calcium silicate board based on optimum fiber content

Authors: Jie Sheng, Rendang Yang, Minhao Zhang, Yang Wang

Published in: Cellulose | Issue 6/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Plant fibers are one of the most promising calcium silicate board (CSB) reinforcement materials because of their many sources, suitable sizes, high tensile strengths, and natural renewable properties. In this study, an applicable plant fiber selection method for reinforcing CSBs was established. The morphology, components, and mechanical properties of different brands of plant fibers were analyzed for factor screening. Based on the wet processes of CSBs, the effects of plant fiber additions on the mechanical properties of CSBs were studied, and the optimum addition amount of plant fiber was determined to be 8 wt.%. Through multiple linear regression analysis of the physical and chemical properties of plant fibers and the mechanical properties of CSBs, a plant fiber strengthening index (Fsi) and toughening index (Fti) of CSBs were formulated as a plant fiber applicability index. The fitted R² values of the plant fiber strengthening index and toughening index were 0.88 and 0.71, respectively, showing good correlation. The validity of the plant fiber applicability index in evaluating the fiber reinforcement potential was verified by experiments. The results provided a significant method for the prediction of plant fibers’ reinforcement potential and the selection of plant fibers for CSB reinforcement.

previous article Amine-functionalized cellulose nanofiber-sodium alginate-Fe(III) porous hollow beads for the efficient removal of Cr(VI)

next article Thiol-functionalized chitosan poly(protic ionic liquids) hydrogel selectively anchors gold nanoparticles for aqueous catalysis

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Anju TR, Ramamurthy K, Dhamodharan R (2016) Surface modified microcrystalline cellulose from cotton as a potential mineral admixture in cement mortar composite. Cem Concr Comp 74:147–153. https://doi.org/10.1016/j.cemconcomp.2016.09.003CrossRef

Ardanuy M, Claramunt J, García-Hortal JA, Barra M (2011) Fiber-matrix interactions in cement mortar composites reinforced with cellulosic fibers. Cellulose 18(2):281–289. https://doi.org/10.1007/s10570-011-9493-3CrossRef

Arman NSN, Chen RS, Ahmad S (2021) Review of state-of-the-art studies on the water absorption capacity of agricultural fiber-reinforced polymer composites for sustainable construction. Constr Build Mater 302:124174. https://doi.org/10.1016/j.conbuildmat.2021.124174CrossRef

Balea A, Blanco A, Negro C (2019) Nanocelluloses: natural-based materials for fiber-reinforced cement composites. A Crit Rev Polym 11(3):518. https://doi.org/10.3390/polym11030518CrossRef

Ban Y, Zhi W, Fei M, Liu W, Yu D, Fu T, Qiu R (2020) Preparation and performance of cement mortar reinforced by modified bamboo fibers. Polymers 12(11):2650. https://doi.org/10.3390/polym12112650CrossRefPubMedPubMedCentral

Bilba K, Arsène MA, Ouensanga A (2003) Sugar cane bagasse fibre reinforced cement composites. Part I. Influence of the botanical components of bagasse on the setting of bagasse/cement composite. Cem Concr Comp 25(1):91–96. https://doi.org/10.1016/S0958-9465(02)00003-3CrossRef

Chen M, Lu L, Wang S, Zhao P, Zhang W, Zhang S (2017) Investigation on the formation of tobermorite in calcium silicate board and its influence factors under autoclaved curing. Constr Build Mater 143:280–288. https://doi.org/10.1016/j.conbuildmat.2017.03.143CrossRef

Claramunt J, Ardanuy M, García-Hortal JA, Tolêdo Filho RD (2011) The hornification of vegetable fibers to improve the durability of cement mortar composites. Cem Concr Comp 33(5):586–595. https://doi.org/10.1016/j.cemconcomp.2011.03.003CrossRef

Ez-zaki H, Riva L, Bellotto M, Valentini L, Garbin E, Punta C, Artioli G (2021) Influence of cellulose nanofibrils on the rheology, microstructure and strength of alkali activated ground granulated blast-furnace slag: a comparison with ordinary Portland cement. Mater Struct 54(1):1–18. https://doi.org/10.1617/s11527-020-01614-5CrossRef

Hisseine OA, Omran AF, Tagnit-Hamou A (2018) Influence of cellulose filaments on cement paste and concrete. J Mater Civil Eng 30(6):04018109. https://doi.org/10.1061/(asce)mt.1943-5533.0002287CrossRef

Khorami M, Ganjian E (2011) Comparing flexural behaviour of fibre-cement composites reinforced bagasse: wheat and eucalyptus. Constr Build Mater 25(9):3661–3667. https://doi.org/10.1016/j.conbuildmat.2011.03.052CrossRef

Kundu SP, Chakraborty S, Roy A, Adhikari B, Majumder SB (2012) Chemically modified jute fibre reinforced non-pressure (NP) concrete pipes with improved mechanical properties. Constr Build Mater 37:841–850. https://doi.org/10.1016/j.conbuildmat.2012.07.082CrossRef

Li Q, Ibrahim L, Zhou W, Zhang M, Yuan Z (2021) Treatment methods for plant fibers for use as reinforcement in cement-based materials. Cellulose 28:5257–5268. https://doi.org/10.1007/s10570-021-03903-wCrossRef

Miao F, Zhang M, Yang R, Sheng J (2022) Effect of beating on softwood pulp fiber reinforced calcium silicate board. Cellulose 29(7):4125–4134. https://doi.org/10.1007/s10570-022-04526-5CrossRef

Mochane MJ, Mokhena TC, Mokhothu TH, Mtibe A, Sadiku ER, Ray SS, Ibrahim ID, Daramola OO (2019) Recent progress on natural fiber hybrid composites for advanced applications: a review. Express Polym Lett 13:159–198. https://doi.org/10.3144/expresspolymlett.2019.15CrossRef

Muñoz E, García-Manrique JA (2015) Water absorption behaviour and its effect on the mechanical properties of flax fibre reinforced bioepoxy composites. Int J Polym Sci. https://doi.org/10.1155/2015/390275CrossRef

Nasir M, Khali DP, Jawaid M, Tahir PM, Siakeng R, Asim M, Khan TA (2019) Recent development in binderless fiber-board fabrication from agricultural residues: a review. Constr Build Mater 211:502–516. https://doi.org/10.1016/j.conbuildmat.2019.03.279CrossRef

Pacheco-Torgal F, Jalali S (2011) Cementitious building materials reinforced with vegetable fibres: a review. Constr Build Mater 25(2):575–581. https://doi.org/10.1016/j.conbuildmat.2010.07.024CrossRef

Saha P, Manna S, Chowdhury SR, Sen R, Roy D, Adhikari B (2010) Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment. Bioresour Technol 101(9):3182–3187. https://doi.org/10.1016/j.biortech.2009.12.010CrossRefPubMed

Steau E, Mahendran M (2021) Elevated temperature thermal properties of fire protective boards and insulation materials for light steel frame systems. J Build Eng 43:102571. https://doi.org/10.1016/j.jobe.2021.102571CrossRef

Tian H, Stephan D, Lothenbach B, Lehmann C (2021) Influence of foreign ions on calcium silicate hydrate under hydrothermal conditions: a review. Constr Build Mater 301:124071. https://doi.org/10.1016/j.conbuildmat.2021.124071CrossRef

Wei J, Meyer C (2014) Degradation rate of natural fiber in cement composites exposed to various accelerated aging environment conditions. Corros Sci 88:118–132. https://doi.org/10.1016/j.corsci.2014.07.029CrossRef

Yoo DY, Banthia N (2016) Mechanical properties of ultra-high-performance fiber-reinforced concrete: a review. Cem Concrete Comp 73:267–280. https://doi.org/10.1016/j.cemconcomp.2016.08.001CrossRef

Title: Effect of plant fiber characteristics on mechanical properties of calcium silicate board based on optimum fiber content
Authors: Jie Sheng
Rendang Yang
Minhao Zhang
Yang Wang
Publication date: 11-03-2023
Publisher: Springer Netherlands
Published in: Cellulose / Issue 6/2023
Print ISSN: 0969-0239
Electronic ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-023-05133-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Other articles of this Issue 6/2023

Carboxymethyl cellulose/polyamidoamine hydrogel loaded with nano-Ag particles as recoverable efficient catalyst for reduction of 4-nitrophenol in water

Construction of amorphous photonic crystal coated fabrics with wash resistance and antifouling performance

Leaf anatomy and fiber types of Curaua (Ananas comosus var. erectifolius)

Pilot-scale preparation of cellulose/carboxymethylcellulose composite fiber for methylene blue adsorption

Thiol-functionalized chitosan poly(protic ionic liquids) hydrogel selectively anchors gold nanoparticles for aqueous catalysis

MoO3–catalyzed transformation of corn stalk cellulose to glycolic acid: an experimental and DFT study