Top

European Journal of Wood and Wood Products

Published in:

28-02-2021 | Original Article

Effect of plasma sizing on basalt fibers adhesion with wood-working resins

Authors: Samuel Kramár, Tomáš Pipíška, Pavel Sťahel, Barbora Pijáková, Monika Stupavská, Anna Oberle, Pavel Král, Jozef Ráheľ

Published in: European Journal of Wood and Wood Products | Issue 4/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Basalt fabric with manufacturer-made silane sizing was additionally treated by propane-butane enriched atmospheric pressure nitrogen plasma for 15 and 30 s. The wetting improvement of treated fabric was demonstrated by faster soaking of K₂CO₃ solution. FTIR and XPS analyses confirmed the presence of new nitrogen-containing chemical groups. The impact on adhesion was investigated via a shear strength test of basalt fabric inlay between two beech wooden boards. A short 15 s long treatment led to almost 50% increase in melamine-urea formaldehyde (MUF), polyvinyl acetate (PVAC) and epoxy resin bond strength. Phenol-resorcinol formaldehyde (PRF) needed longer treatment to achieve a bond strength of 11.2 MPa. Only the polyurethane (PUR) showed reduced adhesion to plasma-treated fibers. However, from all tested resins, PUR exhibited the highest bond strength (15.7 MPa) with untreated basalt fabric. The SEM of tested specimens confirmed the changes in the mechanical adherence of resins to plasma treated fibers. Based on these results, PRF and PUR seem to be the most suitable polymers for basalt fibers reinforcement of structural wood-based materials.

previous article Melamine–formaldehyde curing acceleration by TiO2-based silver-white pigments catalysis

next article Comparative investigation into the interfacial adhesion of plywood prepared by air spray atomization and roller coating

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Ammann S, Niemz P (2015) Mixed-mode fracture toughness of bond lines of PRF and PUR adhesives in European beech wood. Holzforschung 69:415–420. https://doi.org/10.1515/hf-2014-0096CrossRef

Botev M, Betchev H, Bikiaris D, Panayiotou C (1999) Mechanical properties and viscoelastic behavior of basalt fiber-reinforced polypropylene. J Appl Polym Sci 74:523–531. https://doi.org/10.1002/(SICI)1097-4628(19991017)74:3%3c523::AID-APP7%3e3.0.CO;2-RCrossRef

Brabec M, Lagaňa R, Milch J, Tippner J, Sebera V (2017) Utilization of digital image correlation in determining of both longitudinal shear moduli of wood at single torsion test. Wood Sci Technol 51:29–45. https://doi.org/10.1007/s00226-016-0848-7CrossRef

Brunetti M, Christovasilis IP, Micheloni M, Nocetti M, Pizzo B (2019) Production feasibility and performance of carbon fibre reinforced glulam beams manufactured with polyurethane adhesive. Compos Part B Eng 156:212–219. https://doi.org/10.1016/j.compositesb.2018.08.075CrossRef

Cech V, Prikryl R, Balkova R, Grycova A, Vanek J (2002) Plasma surface treatment and modification of glass fibers. Compos Part A Appl Sci Manuf 33:1367–1372. https://doi.org/10.1016/S1359-835X(02)00149-5CrossRef

Czigány T, Deák T, Tamás P (2008) Discontinuous basalt and glass fiber reinforced PP composites from textile prefabricates: effects of interfacial modification on the mechanical performance. Compos Interfaces 15:697–707. https://doi.org/10.1163/156855408786778302CrossRef

Davies P, Casari P, Carlsson LA (2005) Influence of fibre volume fraction on mode II interlaminar fracture toughness of glass/epoxy using the 4ENF specimen. Compos Sci Technol 65:295–300. https://doi.org/10.1016/j.compscitech.2004.07.014CrossRef

de Moura MFSF, Campilho RDSG, Amaro AM, Reis PNB (2010) Interlaminar and intralaminar fracture characterization of composites under mode I loading. Compos Struct 92:144–149. https://doi.org/10.1016/j.compstruct.2009.07.012CrossRef

Deak T, Czigany T, Tamas P, Nemeth C (2010) Enhancement of interfacial properties of basalt fiber reinforced nylon 6 matrix composites with silane coupling agents. Express Polym Lett 4:590–598. https://doi.org/10.3144/expresspolymlett.2010.74CrossRef

Dhand V, Mittal G, Rhee KY, Park S-J, Hui D (2015) A short review on basalt fiber reinforced polymer composites. Compos Part B Eng 73:166–180. https://doi.org/10.1016/j.compositesb.2014.12.011CrossRef

Dhé P (1922) Filament composed of basalt. US 1,438,428

Dvořáková H, Čech J, Stupavská M, Prokeš L, Jurmanová J, Buršíková V, Ráheľ J, Sťahel P (2019) Fast surface hydrophilization via atmospheric pressure plasma polymerization for biological and technical applications. Polymers (Basel) 11:1613. https://doi.org/10.3390/polym11101613CrossRef

EN 314-1 (2005) Plywood—bond quality—part 1: test methods, Brussels, Belgium

EN 13354 (2009) Solid wood panels (SWP)—bonding quality—test method, Brussels, Belgium

EN 13353 (2011) EN 13353+A1—solid wood panels (SWP)—requirements, Brussels, Belgium

Gardner DJ, Davalos JF, Munipalle UM (1994) Adhesive bonding of pultruded fiber-reinforced plastic to wood. For Prod J 44:62–66

Greco A, Maffezzoli A, Buccoliero G, Caretto F, Cornacchia G (2013) Thermal and chemical treatments of recycled carbon fibres for improved adhesion to polymeric matrix. J Compos Mater 47:369–377. https://doi.org/10.1177/0021998312440133CrossRef

Greco A, Maffezzoli A, Casciaro G, Caretto F (2014) Mechanical properties of basalt fibers and their adhesion to polypropylene matrices. Compos Part B Eng 67:233–238. https://doi.org/10.1016/j.compositesb.2014.07.020CrossRef

Gur’ev VV, Neproshin EI, Mostovoi GE (2001) The effect of basalt fiber production technology on mechanical properties of fiber. Glass Ceram 58:62–65. https://doi.org/10.1023/A:1010901615857CrossRef

Khelifa M, Auchet S, Méausoone P-J, Celzard A (2015) Finite element analysis of flexural strengthening of timber beams with carbon fibre-reinforced polymers. Eng Struct 101:364–375. https://doi.org/10.1016/j.engstruct.2015.07.046CrossRef

Kim MT, Kim MH, Rhee KY, Park SJ (2011) Study on an oxygen plasma treatment of a basalt fiber and its effect on the interlaminar fracture property of basalt/epoxy woven composites. Compos Part B Eng 42:499–504. https://doi.org/10.1016/j.compositesb.2010.12.001CrossRef

Klemberg-Sapieha JE, Küttel OM, Martinu L, Wertheimer MR (1991) Dual-frequency N 2 and NH 3 plasma modification of polyethylene and polyimide. J Vac Sci Technol A Vacuum Surf Film 9:2975–2981. https://doi.org/10.1116/1.577158CrossRef

Kollmann F (1951) Technology of wood and wood based products (in German: Technologie des Holzes und der Holzwerkstoffe), 1st edn. Springer, Berlin

Konnerth J, Jäger A, Eberhardsteiner J, Müller U, Gindl W (2006) Elastic properties of adhesive polymers. II. Polymer films and bond lines by means of nanoindentation. J Appl Polym Sci 102:1234–1239. https://doi.org/10.1002/app.24427CrossRef

Kramár S, Trcala M, Chitbanyong K, Král P, Puangsin B (2019) Basalt-fiber-reinforced polyvinyl acetate resin: a coating for ductile plywood panels. Materials (Basel) 13:49. https://doi.org/10.3390/ma13010049CrossRef

Kramár S, Mayer AK, Schöpper C, Mai C (2020) Use of basalt scrim to enhance mechanical properties of particleboards. Constr Build Mater 238:117769. https://doi.org/10.1016/j.conbuildmat.2019.117769CrossRef

Kurniawan D, Kim BS, Lee HY, Lim JY (2012) Atmospheric pressure glow discharge plasma polymerization for surface treatment on sized basalt fiber/polylactic acid composites. Compos Part B Eng 43:1010–1014. https://doi.org/10.1016/j.compositesb.2011.11.007CrossRef

Ling Z, Yang H, Liu W, Zhu S, Chen X (2018) Local bond stress-slip relationships between glue laminated timber and epoxy bonded-in GFRP rod. Constr Build Mater 170:1–12. https://doi.org/10.1016/j.conbuildmat.2018.03.052CrossRef

Manikandan V, Winowlin Jappes JT, Suresh Kumar SM, Amuthakkannan P (2012) Investigation of the effect of surface modifications on the mechanical properties of basalt fibre reinforced polymer composites. Compos Part B Eng 43:812–818. https://doi.org/10.1016/j.compositesb.2011.11.009CrossRef

Mirzaei G, Mohebby B, Tasooji M (2012) The effect of hydrothermal treatment on bond shear strength of beech wood. Eur J Wood Prod 70:705–709. https://doi.org/10.1007/s00107-012-0608-9CrossRef

Morova N (2013) Investigation of usability of basalt fibers in hot mix asphalt concrete. Constr Build Mater 47:175–180. https://doi.org/10.1016/j.conbuildmat.2013.04.048CrossRef

Müller U, Sretenovic A, Vincenti A, Gindl W (2005) Direct measurement of strain distribution along a wood bond line. Part 1: shear strain concentration in a lap joint specimen by means of electronic speckle pattern interferometry. Holzforschung 59:300–306. https://doi.org/10.1515/HF.2005.050CrossRef

Mutel B, Grimblot J, Dessaux O, Goudmand P (2000) XPS investigations of nitrogen-plasma-treated polypropylene in a reactor coupled to the spectrometer. Surf Interface Anal 30:401–406. https://doi.org/10.1002/1096-9918(200008)30:1%3c401::AID-SIA826%3e3.0.CO;2-GCrossRef

O’Ceallaigh C, Sikora K, McPolin D, Harte AM (2018) An investigation of the viscoelastic creep behaviour of basalt fibre reinforced timber elements. Constr Build Mater 187:220–230. https://doi.org/10.1016/j.conbuildmat.2018.07.193CrossRef

Onat SM, Kloeser L, Mai C (2014) An amino-alkyl siloxane oligomer as hydrophobation agent for particleboards used under high humidity conditions. Eur J Wood Prod 72:643–649. https://doi.org/10.1007/s00107-014-0829-1CrossRef

Park JM, Subramanian RV (1991) Interfacial shear strength and durability improvement by monomeric and polymeric silanes in basalt fiber/epoxy single-filament composite specimens. J Adhes Sci Technol 5:459–477. https://doi.org/10.1163/156856191X00602CrossRef

Park JM, Subramanian RV, Bayoumi AE (1994) Interfacial shear strength and durability improvement by silanes in single-filament composite specimens of basalt fiber in brittle phenolic and isocyanate resins. J Adhes Sci Technol 8:133–150. https://doi.org/10.1163/156856194X00113CrossRef

Parker FS (1971) Amides and amines. Applications of infrared spectroscopy in biochemistry, biology, and medicine. Springer US, Boston, pp 165–172CrossRef

Požgaj A, Chovanec D, Kurjatko S, Babiak M (1997) Structure and properties od wood (in Slovak: Štruktúra a vlastnosti dreva), 2nd edn. Príroda, Bratislava

Pucci MF, Liotier P-J, Drapier S (2015) Capillary effects on flax fibers—modification and characterization of the wetting dynamics. Compos Part A Appl Sci Manuf 77:257–265. https://doi.org/10.1016/j.compositesa.2015.03.010CrossRef

Pucci MF, Seghini MC, Liotier P-J et al (2017) Surface characterisation and wetting properties of single basalt fibres. Compos Part B Eng 109:72–81. https://doi.org/10.1016/j.compositesb.2016.09.065CrossRef

Raftery GM, Whelan C (2014) Low-grade glued laminated timber beams reinforced using improved arrangements of bonded-in GFRP rods. Constr Build Mater 52:209–220. https://doi.org/10.1016/j.conbuildmat.2013.11.044CrossRef

Raftery GM, Harte AM, Rodd PD (2009) Bond quality at the FRP–wood interface using wood-laminating adhesives. Int J Adhes Adhes 29:101–110. https://doi.org/10.1016/j.ijadhadh.2008.01.006CrossRef

Ráhel J, Tiňo R (2016) Wood surfaces: plasma activation. Encyclopedia of plasma technology. CRC Press, Boca Raton, pp 1541–1551

Richter K, Steiger R (2005) Thermal stability of wood-wood and wood-FRP bonding with polyurethane and epoxy adhesives. Adv Eng Mater 7:419–426. https://doi.org/10.1002/adem.200500062CrossRef

Rowell RM (2012) Handbook of wood chemistry and wood composites. CRC Press, Boca RatonCrossRef

Serrano E (2004) A numerical study of the shear-strength-predicting capabilities of test specimens for wood–adhesive bonds. Int J Adhes Adhes 24:23–35. https://doi.org/10.1016/S0143-7496(03)00096-4CrossRef

Sikora KS, McPolin DO, Harte AM (2016) Shear strength and durability testing of adhesive bonds in cross-laminated timber. J Adhes 92:758–777. https://doi.org/10.1080/00218464.2015.1094391CrossRef

Thomason J, Adzima L (2001) Sizing up the interphase: an insider’s guide to the science of sizing. Compos Part A Appl Sci Manuf 32:313–321. https://doi.org/10.1016/S1359-835X(00)00124-XCrossRef

Tseng DY, Edelman ER (1998) Effects of amide and amine plasma-treated ePTFE vascular grafts on endothelial cell lining in an artificial circulatory system. J Biomed Mater Res 42:188–198. https://doi.org/10.1002/(SICI)1097-4636(199811)42:2%3c188::AID-JBM4%3e3.0.CO;2-LCrossRefPubMed

Ugolev BN (2007) Wood science and forest commodity science (in Russian: Drevesinovedenie i lesnoe tovarovedenie). MGUL, Moscow

Varelidis PC, McCullough RL, Papaspyrides CD (1999) The effect on the mechanical properties of carbon/epoxy composites of polyamide coatings on the fibers. Compos Sci Technol 59:1813–1823. https://doi.org/10.1016/S0266-3538(99)00039-1CrossRef

Wang GJ, Liu YW, Guo YJ, Zhang ZX, Xu MX, Yang ZX (2007) Surface modification and characterizations of basalt fibers with non-thermal plasma. Surf Coat Technol 201:6565–6568. https://doi.org/10.1016/j.surfcoat.2006.09.069CrossRef

Wang J, Zhou S, Huang J, Zhao G, Liu Y (2018) Interfacial modification of basalt fiber filling composites with graphene oxide and polydopamine for enhanced mechanical and tribological properties. RSC Adv 8:12222–12231. https://doi.org/10.1039/C8RA00106ECrossRef

Wei B, Cao H, Song S (2011a) Surface modification and characterization of basalt fibers with hybrid sizings. Compos Part A Appl Sci Manuf 42:22–29. https://doi.org/10.1016/j.compositesa.2010.09.010CrossRef

Wei B, Song S, Cao H (2011b) Strengthening of basalt fibers with nano-SiO₂-epoxy composite coating. Mater Des 32:4180–4186. https://doi.org/10.1016/j.matdes.2011.04.041CrossRef

Wolkenhauer A, Militz H, Viöl W (2008) Increased PVA-glue adhesion on particle board and fibre board by plasma treatment. Holz Roh Werkst 66:143–145. https://doi.org/10.1007/s00107-007-0217-1CrossRef

Živković I, Fragassa C, Pavlović A, Brugo T (2017) Influence of moisture absorption on the impact properties of flax, basalt and hybrid flax/basalt fiber reinforced green composites. Compos Part B Eng 111:148–164. https://doi.org/10.1016/j.compositesb.2016.12.018CrossRef

Title: Effect of plasma sizing on basalt fibers adhesion with wood-working resins
Authors: Samuel Kramár
Tomáš Pipíška
Pavel Sťahel
Barbora Pijáková
Monika Stupavská
Anna Oberle
Pavel Král
Jozef Ráheľ
Publication date: 28-02-2021
Publisher: Springer Berlin Heidelberg
Published in: European Journal of Wood and Wood Products / Issue 4/2021
Print ISSN: 0018-3768
Electronic ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-021-01673-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Other articles of this Issue 4/2021

Estimating mechanical properties of clear wood from ten‐year‐old Melia azedarach trees using the stress wave method

Characterisation of hardwood fibres used for wood fibre insulation boards (WFIB)

Influence of moisture content on the contact angle and surface tension measured on birch wood surfaces

Melamine–formaldehyde curing acceleration by TiO2-based silver-white pigments catalysis

On the tribological properties of extremely different wood materials

Compression and low velocity impact response of wood-based sandwich panels with auxetic lattice core