Top

Journal of Polymer Research

Published in:

01-03-2017

Effect of poly(styrene-co-maleic anhydride) on physical properties and crystalline behavior of nylon-6/PEBA blends

Authors: Wei-Ming Chen, Ming-Chien Yang, Shinn-Gwo Hong, Yi-Shen Hsieh

Published in: Journal of Polymer Research | Issue 3/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This study investigated the effect of blending poly(styrene-co-maleic anhydride) (SMA) on the mechanical and thermal properties of nylon-6/polyether block amide (PEBA) blend. In these blends, nylon-6 was toughened with PEBA using SMA as the compatibilizer. All the blends were prepared via direct melt compounding using a co-rotating twin screw extruder. The amount of PEBA added affected the crystallization characteristics and the relative ratio of γ and α crystalline phases of Nylon 6. The crystallization rate of Nylon 6 was also affected by the cooling rate and the amount of PEBA added. The results of mechanical tests showed that the tensile properties, flexural properties, and impact strengths of the nylon-6/PEBA were all increased when blended with 1 wt% of SMA, at both 23 and −20 °C. However, for neat nylon-6, the impact strength was not affected despite that both tensile and flexural properties were increased by the blending of SMA. The results indicated that SMA can increase the compatibility between nylon-6 and PEBA, thus expanding the usage of nylon-6/PEBA blend in low-temperature applications.

previous article Reinforcement of electroactive characteristics in polyvinylidene fluoride electrospun nanofibers by intercalation of multi-walled carbon nanotubes

next article Toughening of epoxy hybrid nanocomposites modified with silica nanoparticles and epoxidized natural rubber

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Gaymans RJ, Borggreve RJM (1988) Integr Fundam Polym Sci Technol 2:248CrossRef

Gonzhlez-Montiel A, Keskkula H, Paul DR (1995) Polymer 36:4621–4637CrossRef

Wang XH, Zhang HX, Jiang W, Wang ZG, Liu CH, Liang HJ, Jiang BZ (1998) Polymer 39:2697–2699CrossRef

Lu M, Keskkula H, Paul DR (1995) J Appl Polym Sci 58:1175–1188CrossRef

Yu ZZ, Ou YC, Qi ZN, Hu GH (1998) J Polym Sci B Polym Phys 36:1987–1994CrossRef

Wang Y, Wang W, Peng F, Liu M, Zhao Q, Fu PF (2009) Polym Int 58:190–197CrossRef

Yu H, Zhang Y, Ren W (2009) J Polym Sci B Polym Phys 47:877–887CrossRef

Okada O, Keskkula H, Paul DR (2004) J Polym Sci B Polym Phys 42:1739–1758CrossRef

Wu D, Wang X, Jin R (2006) J Appl Polym Sci 99:3336–3343CrossRef

10.

Liu H, Xie T, Hou L, Ou Y, Yang G (2006) J Appl Polym Sci 99:3300–3307CrossRef

11.

Li QF, Kim DG, Wu DZ, Lu K, Jin RG (2001) Polym Eng Sci 41:2155–2161CrossRef

12.

Choudhury A, Balmurulikrishnan A, Sarkhel G (2008) Polym Adv Technol 19:1226–1235CrossRef

13.

Yu ZZ, Ke YC, Ou YC, Hu GH (2000) J Appl Polym Sci 76:1285–1295CrossRef

14.

Xie T, Yang G (2004) J Appl Polym Sci 93:1446–1453CrossRef

15.

Yu H, Zhang Y, Ren W (2009) J Polym Sci B Polym Phys 47:434–444CrossRef

16.

Peng J, Qiao J, Zhang S, Wei G (2002) Macromol Mater Eng 287:867–870CrossRef

17.

Wang BB, Wei LX, Hu GS (2008) J Appl Polym Sci 110:1344–1350CrossRef

18.

Yu H, Zhang Y, Ren W (2009) Polym Eng Sci 49:2393–2399CrossRef

19.

Araújo EM, Jr EH, Carvalho AJF (2003) J Appl Polym Sci 90:3512–3518CrossRef

20.

Du L, Yang G (2010) Polym Eng Sci 50:1178–1185CrossRef

21.

Yu H, Zhang Y, Ren W, Hoch M, Guo S (2011) J Appl Polym Sci 121:3340–3346CrossRef

22.

Kumar S, Satapathy BK, Maiti SN (2013) Polym Adv Technol 24:511–519CrossRef

23.

Kudva RA, Keskkula H, Paul DR (1999) Polymer 40:6003–6021CrossRef

24.

Afshari M, Kotek R, Kish MH, Dast HN, Gupta BS (2002) Polymer 43:1331–1341CrossRef

25.

Banerjee SS, Bhowmick AK (2013) Polymer 54:6561–6571CrossRef

26.

Tanrattanakul V, Sungthong N, Raksa P (2008) Polym Test 27:794–800CrossRef

27.

Chiang CR, Chang FC (1997) Polymer 38(19):4807–4817CrossRef

28.

Qin SH, Yu J, Zheng Q, He M, Zhu H (2008) Chin J Polym Sci 26(1):73–80CrossRef

29.

Ren X, Wu G, Zhang X (2011) 2011 2nd international conference on chemistry and chemical engineering. IPCBEE 14:125–129

30.

Liu T, Tjiu WC, He C, Na SS, Chung TS (2004) Polym Int 53:392–399CrossRef

31.

Fornes TD, Paul DR (2003) Polymer 44:3945–3961CrossRef

32.

Murthy NS, Aharoni SM, Szollosi AB (1985) J Polym Sci Polym Phys Ed 23:2549–2565CrossRef

33.

Zhang CF, Liu YH, et al. (2009) Sci China B:Chem 39(11):1378–1385

34.

Dasgupta S, Hammond WB, Goddard III WA (1996) J Am Chem Soc 118:12291–12301CrossRef

35.

Liu Y, Cui L, Guan F, Gao Y, Hedin NE, Zhu L, Fong H (2007) Macromolecules 40(17):6283–6290CrossRef

36.

Katoh Y, Okamoto M (2009) Polymer 50:4718–4726CrossRef

37.

Rwei SP, Tseng YC, Chiu KC, Chang SM, Chen YM (2013) Thermochim Acta 555:37–45CrossRef

38.

Zapata-Espinosa A, Medellín-Rodríguez FJ, Stribeck N, Almendarez-Camarillo A, Vega-Díaz S, Hsiao BS, Chu B (2005) Macromolecules 38:4246–4253CrossRef

39.

Miyata K, Watanabe Y, Itaya T, Tanigaki T, Inoue K (1996) Macromolecules 29:3694–3700CrossRef

40.

Vo LT, Giannelis EP (2007) Macromolecules 40:8271–8276CrossRef

41.

Tedesco A, Barbosa RV, Nachtigall SMB, Mauler RS (2002) Polym Test 21:11–15CrossRef

42.

Kim KJ, Cho HW, Yoon KJ (2003) Eur Polym J 39:1249–1265CrossRef

43.

Khatua BB, Lee DJ, Kim HY, Kim JK (2004) Macromolecules 37:2454–2459CrossRef

44.

Oderkerk J, Groeninckx G (2002) Macromolecules 35:3946–3954CrossRef

45.

Beltrán Á, Gómez-Emeterio BP, Marco C, Ellis G, Parellada MD, Díaz-Requejo MM, Corona-Galván S, Pérez PJ (2012) Macromolecules 45:9267–9274CrossRef

46.

Biber E, Gunduz G, Mavis B, Colak U (2010) Mater Chem Phys 122:93–101CrossRef

47.

Lai SM, Li HC, Liao YC (2007) Eur Polym J 43:1660–1671CrossRef

48.

Wu D, Wang X, Jin R (2004) Eur Polym J 40:1223–1232CrossRef

49.

Huang JW, Chang CC, Kang CC, Yeh MY (2008) Thermochim Acta 468:66–74CrossRef

50.

Psarski M, Pracella M, Galeski A (2000) Polymer 41:4923–4932CrossRef

51.

Kim JH, Ha SY, Lee YM (2001) J Membr Sci 190:179–193CrossRef

52.

Sjong A, Villagomez F, Kendale A (2006) ANTEC plastics. In: Annual technical conference proceedings. Society of Plastic Engineers, Charlotte, pp. 1544–1548

53.

Murray KA, Kennedy JE, McEvoy B, Vrain O, Ryan D, Cowman R, Higginbotham CL (2013) J Mech Behav Biomed Mater 17:253CrossRef

54.

Todros S, Natali AN, Piga M, Giffin GA, Pace G, Noto VD (2013) Polym Degrad Stab 98:1126–1137CrossRef

55.

Illers KH (1978) Makromol Chem 179(2):497–507CrossRef

56.

Khanna YP, Kuhn WP (1997) J Polym Sci B Polym Phys 35:2219CrossRef

57.

Wunderlich B (1980) Macromolecular physics. Crystal melting. Vol. 3. Academic Press, New York

58.

Gogolewski S, Gasiorek M, Czerniawska K, Pennings AJ (1982) Colloid Polym Sci 260(9):859–863CrossRef

59.

Starkweather Jr HW, Zoller P, Jones GA (1984) J Polym Sci, Polym Phys Ed 22(9):1615–1621CrossRef

60.

The technical datasheets of Pebax® Rnew 40R53 SP 01, Retrieved from http://www.pebax.com/export/sites/pebax/.content/medias/downloads/literature/tds-pebaxrnew-40r53sp01.pdf

Title: Effect of poly(styrene-co-maleic anhydride) on physical properties and crystalline behavior of nylon-6/PEBA blends
Authors: Wei-Ming Chen
Ming-Chien Yang
Shinn-Gwo Hong
Yi-Shen Hsieh
Publication date: 01-03-2017
Publisher: Springer Netherlands
Published in: Journal of Polymer Research / Issue 3/2017
Print ISSN: 1022-9760
Electronic ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-017-1201-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2017

Preparation of poly(methyl methacrylate)/silicon particle composites and the study of the properties improvement

Nitrocellulose-based hybrid materials with T7-POSS as a modifier: effective reinforcement for thermal stability, combustion safety, and mechanical properties

Expanded graphene-oxide encapsulated polyaniline composites as sensing material for volatile organic compounds

pH sensitive release of doxorubicin anticancer drug from gold nanocomposite hydrogel based on poly(acrylic acid) grafted onto salep biopolymer

Electrically conductive polyaniline/polyimide microfiber membrane prepared via a combination of solution blowing and subsequent in situ polymerization growth

Preparation and properties of novel photoluminescent thermosensitive hydrogels containing a pyrene group

Premium Partners