Top

Metallography, Microstructure, and Analysis

Published in:

13-02-2024 | Original Research Article

Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718

Authors: H. M. Medrano-Prieto, A. Santos-Beltrán, V. Gallegos-Orozco, M. M. Santos-Beltrán, H. Camacho-Montes, C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodriguez, I. Estrada-Guel, G. Rodríguez-Cabriales, J. C. Guía-Tello, J. M. Mendoza-Duarte, J. M. Silva-Aceves, J. S. Castro-Carmona, R. Martínez-Sánchez

Published in: Metallography, Microstructure, and Analysis | Issue 1/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A series of Inconel 718 alloys modified by additions of 0.1-0.3 of a mixture of rare earth elements Ce:La:Nd:Pr have been synthesized by powder metallurgy. These alloys were sintered by conventional and hot isostatic pressure methods and subject to standard aging treatment. The results showed that adding rare earth elements generates γ′ and γ″ precipitates with a minor size than those reported. Additionally, the presence of rare earth elements causes the formation of La-Ti-Al-O phases that act as reinforcing particles. The highest microhardness values were obtained in the samples with 0.3 wt.% of rare earth elements and sintered by hot isostatic pressure. These hardness values are attributed to the precipitation of the nanophases (γ′ and γ″), the high numeric density of dispersed oxides and carbides, and solid solution strengthening generated by rare earth elements addition and dissolution of elements in the Nb, Ti and Mo rich phases.

previous article Microstructure Evolution in 304L Stainless Steel Cladding Produced by Additive Friction Stir Deposition

next article Dialogue with Emerging Engineers

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

N. Nayan, N.P. Gurao, S.V.S. Narayana-Murty, A.K. Jha, B. Pant, K.M. George, Microstructure and micro-texture evolution during large strain deformation of Inconel alloy IN718. Mater Charact. 110, 236–241 (2015). https://doi.org/10.1016/j.matchar.2015.10.027CrossRef

E. Bassini, V. Vola, M. Lorusso, R. Ghisleni, M. Lombardi, S. Biamino, D. Ugues, G. Vallillo, B. Picqué, Net shape HIPping of Ni-superalloy: Study of the interface between the capsule and the alloy. Mater. Sci. Eng. A. 695, 55–65 (2017). https://doi.org/10.1016/j.msea.2017.04.016CrossRef

M.-S. Chen, Z.-H. Zou, Y.C. Lin, H.-B. Li, G.-Q. Wang, Y.-Y. Ma, Microstructural evolution and grain refinement mechanisms of a Ni-based superalloy during a two-stage annealing treatment. Mater Charact. 151, 445–456 (2019). https://doi.org/10.1016/j.matchar.2019.03.037CrossRef

G.A. Rao, M. Kumar, M. Srinivas, D.S. Sarma, Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 718. Mater. Sci. Eng. A. 355, 114–125 (2003). https://doi.org/10.1016/S0921-5093(03)00079-0CrossRef

G.A. Rao, M. Srinivas, D.S. Sarma, Influence of modified processing on structure and properties of hot isostatically pressed superalloy Inconel 718. Mater. Sci. Eng. A. 418, 282–291 (2006). https://doi.org/10.1016/j.msea.2005.11.031CrossRef

A. Chamanfar, L. Sarrat, M. Jahazi, M. Asadi, A. Weck, A.K. Koul, Microstructural characteristics of forged and heat treated Inconel-718 disks. Mater. Des. 52, 791–800 (2013). https://doi.org/10.1016/j.matdes.2013.06.004CrossRef

C. Slama, M. Abdellaoui, Structural characterization of the aged Inconel 718. J. Alloys Compd. 306, 277–284 (2000). https://doi.org/10.1016/S0925-8388(00)00789-1CrossRef

M. Jambor, O. Bokůvka, F. Nový, L. Trško, J. Belan, Phase transformations in nickel base superalloy inconel 718 during cyclic loading at high temperature. Prod. Eng. Arch. 15, 15–18 (2017). https://doi.org/10.30657/pea.2017.15.04CrossRef

I.M. Makena, M.B. Shongwe, M.M. Ramakokovhu, M.L. Lethabane, Effect of heating rate on the density, hardness and microstructural properties of spark plasma sintered Ni-Fe-Cr alloys. Proc World Congr. Eng. 2, 1–6 (2017)

10.

S. Pasebani, A.K. Dutt, J. Burns, I. Charit, R.S. Mishra, Oxide dispersion strengthened nickel based alloys via spark plasma sintering. Mater. Sci. Eng. A. 630, 155–169 (2015). https://doi.org/10.1016/j.msea.2015.01.066CrossRef

11.

A.K. Chaudhari, V.B. Singh, Impact of CeO2 incorporation in electrodeposited Ni-Fe on structure and physical properties of multifunctional nanocomposites. Arab. J. Chem. 12, 5028–5039 (2019). https://doi.org/10.1016/j.arabjc.2016.11.007CrossRef

12.

Yu. Li, Lu. Zheng, S. Peng, X. Li, Effect of Al/Ti ratio on γ′ and oxide dispersion strengthening in Ni-based ODS superalloys. Mater. Sci. Eng. A. 845, 143240 (2022). https://doi.org/10.1016/j.msea.2022.143240CrossRef

13.

S.M. Seyyed-Aghamiri, H.R. Shahverdi, S. Ukai, N. Oono, K. Taya, S. Miura, S. Hayashi, T. Okuda, Microstructural characterization of a new mechanically alloyed Ni-base ODS superalloy powder. Mater Charact. 100, 135–142 (2015). https://doi.org/10.1016/j.matchar.2014.12.008CrossRef

14.

e.g.,A. Luis, A. Bedolla-Jacuinde, F.V. Guerra et al., Influence of rare earth additions to an inconel 718 alloy. MRS Adv. 5, 3035–3043 (2020). https://doi.org/10.1557/adv.2020.387CrossRef

15.

W. Jasinski, P. Zawada, Stability of superalloys doped with rare earth elements. Key Eng. Mater. 586, 141–145 (2013). https://doi.org/10.4028/www.scientific.net/KEM.586.141CrossRef

16.

G.A. Rao, K. Satyaprasad, M. Kumar, M. Srinivas, D.S. Sarma, Characterization of hot isostatically pressed nickel base superalloy inconel 718. Mater. Sci. Technol. 19(3), 313–321 (2003). https://doi.org/10.1179/026708303225010605CrossRef

17.

M. Shrivastava, V.K.W. Grips, K.S. Rajam, Electrodeposition of Ni–Co composites containing nano-CeO2 and their structure, properties. Appl. Surf. Sci. 257, 717–722 (2010). https://doi.org/10.1016/j.apsusc.2010.07.046CrossRef

18.

H.V. Atkinson, B.A. Riknson, Hot isostatic processing, 1st edn (Bristol Adam Hilger, Philadelphia, 1991)

Title: Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718
Authors: H. M. Medrano-Prieto
A. Santos-Beltrán
V. Gallegos-Orozco
M. M. Santos-Beltrán
H. Camacho-Montes
C. G. Garay-Reyes
M. A. Ruiz-Esparza-Rodriguez
I. Estrada-Guel
G. Rodríguez-Cabriales
J. C. Guía-Tello
J. M. Mendoza-Duarte
J. M. Silva-Aceves
J. S. Castro-Carmona
R. Martínez-Sánchez
Publication date: 13-02-2024
Publisher: Springer US
Published in: Metallography, Microstructure, and Analysis / Issue 1/2024
Print ISSN: 2192-9262
Electronic ISSN: 2192-9270
DOI: https://doi.org/10.1007/s13632-024-01047-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2024

Understanding the Subsurface Microstructure and Thermal Behavior of Model Oxide Dispersion Strengthened Alloys Through FIB_SEM and TEM

Dialogue with Emerging Engineers

Microstructure and Mechanical Properties of Heat-Treated High-Nitrogen Martensitic Stainless Steel

Effects of Homogenization Heat Treatment on Microstructure, Mechanical and Corrosion Properties of Transient Liquid Phase (TLP)-Bonded Inconel 617/AISI 310 Stainless Steel

A Hypothesis for the Mechanism that Produces the Utsuri Pattern on Japanese Swords

Statistical Distribution of Si Phases at Different Sr Levels in AlSi9 Alloys

Premium Partners