Top

Journal of Materials Engineering and Performance

Published in:

20-12-2016

Effect of Sintering Temperature of Mo Skeleton on the Contiguity and Compressive Properties of Mo-Cu IPCs

Authors: Longfei Liu, Fuhua Cao, Liwei Lu, Jianhui Yan

Published in: Journal of Materials Engineering and Performance | Issue 2/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Interpenetrating phase composites (IPCs) are interesting materials, in which each phase can contribute its most desirable attributes to the composite as a whole by its contiguous morphology. In the present study, molybdenum-copper (Mo-Cu) composites with interpenetrating microstructure were fabricated by open-celled porous Mo skeleton with infiltration of Cu. Effects of sintering temperature on the Mo-Mo contiguity and compressive properties of the Mo-Cu IPCs were examined. The contiguity of Mo-Mo and compressive strength increase with the sintering temperature increasing from 1473 to 1873 K, and decrease at 2073 K. Volume fraction of Cu infiltrated in Mo skeleton and failure strain of composites decrease with the sintering temperature increasing from 1473 to 1873 K and increase at 2073 K. Mutual dependency of compressive properties and contiguity of Mo-Cu IPCs are illustrated.

previous article Effect of Post-weld Heat Treatment on the Mechanical Properties of Supermartensitic Stainless Steel Deposit

next article Microstructural and Mechanical Characterization of a Dissimilar Friction Stir-Welded AA5083-AA7B04 Butt Joint

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

J.L. Johnson and R.M. German, Role of Solid-State Skeletal Sintering during Processing of Mo-Cu Composites, Metall. Mater. Trans. A, 2001, 32A, p 605–613CrossRef

G.Q. Chen, L.T. Jiang, G.H. Wu, D.Z. Zhu, and Z.Y. Xiu, Fabrication and Characterization of High Dense Mo/Cu Composites for Electronic Packaging Applications, Trans. Nonferrous Metals Soc., 2007, 17, p 580–583

G.A. Tikhii, N.I. Kachalin, V.P. Belova, and V.I. Nikitin, Study of a Mo-Cu Pseudoalloy Obtained from Mechanically Activated Charge, Met. Sci. Heat Treat., 2007, 49, p 448–452CrossRef

J.L. Fan, Y.B. Chen, T. Liu, and J.M. Tian, Sintering Behavior of Nanocrystalline Mo-Cu Composite Powders, Rare Metal Mater. Eng., 2009, 38, p 1693–1697CrossRef

S. Han, Y. Song, S. Cui, and Y. Xia, Sintering Mechanism of Mo-Cu Composites, Rare Met., 2009, 33, p 53–56

B. Wang, S.H. Liang, J.T. Zou, X.H. Yang, and P. Xiao, Effect of Fe Content on the Microstructure and Properties of Mo-Cu Alloy, Rare Metal Mater. Eng., 2011, 40, p 1621–1624

S.B. Guo, Q.P. Kang, C.B. Cai, and X.H. Qu, Mechanical Properties and Expansion Coefficient of Mo-Cu Composites with Different Ni Contents, Rare Met., 2012, 31, p 368–371CrossRef

D.Z. Wang, X.J. Dong, P. Zhou, A.K. Sun, and B.H. Duan, The Sintering Behavior of Ultra-fine Mo-Cu Composite Powders and the Sintering Properties of the Composite Compacts, Int. J. Refract. Metals Hard Mater., 2014, 42, p 240–245CrossRef

J.T. Yao, C.J. Li, Y. Li, B. Chen, and H.B. Huo, Relationships between the Properties and Microstructure of Mo-Cu Composites Prepared by Infiltrating Copper into Flame-sprayed Porous Mo Skeleton, Mater. Des., 2015, 88, p 774–780

10.

A.K. Sun, X.J. Dong, X.Y. Wang, B.H. Duan, and D.Z. Wang, Synthesis of Novel Core-shell Cu@Mo Nanoparticles with Good Sinterability, J. Alloys Compd., 2013, 555, p 6–9CrossRef

11.

Z. Wu, G.H. Wu, P.C. Kang, Q. Gou, G.Q. Chen, and L.T. Jiang, High Temperature Fracture Behavior of Tungsten Fiber Reinforced Copper Matrix Composites under Dynamic Compression, Mater. Des., 2011, 32, p 5022–5026CrossRef

12.

G.J. Li, X. Zhang, Q.B. Fan, L.L. Wang, H.M. Zhang, F.C. Wang, and Y.W. Wang, Simulation of Damage and Failure Processes of Interpenetrating SiC/Al Composites Subjected to Dynamic Compressive Loading, Acta Mater., 2014, 78, p 190–202CrossRef

13.

L.D. Wegner and L.J. Gibson, The Fracture Toughness Behaviour of Interpenetrating Phase Composites, Int. J. Mech. Sci., 2001, 43, p 1771–1791CrossRef

14.

H. Chang, J. Binnera, R. Higginson, P. Myers, P. Webb, and G. King, High Strain Rate Characteristics of 3-3 Metal-Ceramic, Mater. Sci. Eng., A, 2011, 528, p 2239–2245CrossRef

15.

S. Vaucher, J. Kuebler, O. Beffort, L. Biasetto, F. Zordan, and P. Colombo, Ceramic Foam-Reinforced Al-based Micro-Composites, Compos. Sci. Technol., 2008, 68, p 3202–3207CrossRef

16.

N. Dukhan, N. Rayess, and J. Hadley, Characterization of Aluminum Foam-Polypropylene Interpenetrating Phase Composites: Flexural Test Results, Mech. Mater., 2010, 42, p 134–141CrossRef

17.

B. Wang, Y.X. Zhao, Z.L. Wei, J. Feng, J.F. Yang, and K. Niihara, Effect of Porous Si₃N₄ Preform on the Mechanical Properties of Si₃N₄/Al Composites with Interpenetrating Network Structure, Mater. Sci. Eng., A, 2014, 607, p 307–312CrossRef

18.

M. Ahangarkani, S. Borgi, H. Abbaszadeh, A.A. Rahmani, and K. Zangeneh-Madar, The Effect of Additive and Sintering Mechanism on the Microstructural Characteristics of W-40Cu Composites, Int. J. Refract. Metals Hard Mater., 2012, 32, p 39–44CrossRef

19.

F.K. Yang, C.W. Li, Y.M. Lin, and C.A. Wang, Effects of Sintering Temperature on Properties of Porous Mullite/Corundum Ceramics, Mater. Lett., 2012, 73, p 36–39CrossRef

20.

W.Q. Guo, J.X. Liu, S.K. Li, H.Y. Zhang, Z.Y. Zhao, and X.W. Cheng, The Effect of Preparation Methods on the Microstructure and Dynamic Compressive Properties of 65 W-25Cu-10Ni Alloys, Int. J. Refract. Metals Hard Mater., 2015, 48, p 238–244CrossRef

21.

M. Amirjan, N. Parvin, and K.Z. Madar, Mutual Dependency of Mechanical Properties and Contiguity in W-Cu Composites, Mater. Sci. Eng., A, 2010, 527, p 6922–6929CrossRef

22.

M. Kouzeli and D.C. Dunand, Effect of Reinforcement Connectivity on the Elasto-Plastic Behavior of Aluminum Composites Containing Sub-micron Alumina Particles, Acta Mater., 2003, 51, p 6105–6121CrossRef

23.

Q.Z. Wang, C.X. Cui, S.J. Liu, and L.C. Zhao, Open-Celled Porous Cu Prepared by Replication of NaCl Space-Holders, Mater. Sci. Eng., A, 2010, 527, p 1275–1278CrossRef

24.

V.S. Balaji and S. Kumaran, Densification and Microstructural Studies of Titanium-Boron Carbide (B4C) Powder Mixture during Spark Plasma Sintering, Powder Technol., 2014, 264, p 536–540CrossRef

25.

R.F.K. Gunnewiek and R.H.G.A. Kiminami, Effect of Heating Rate on Microwave Sintering of Nanocrystalline Zinc Oxide, Cream. Int., 2014, 40, p 10667–10675CrossRef

26.

H. Xie and G.J. Zhang, Molybdenum and Molybdenum Powder Metallurgy Process, Science Press, Beijing, 2012, p 121–122

27.

H.H. Zhang, Y.L. Xu, B. Wang, X. Zhang, J.F. Yang, and K. Niiharac, Effects of Heating Rate on the Microstructure and Mechanical Properties of Rapid Vacuum Sintered Translucent Alumina, Cream. Int., 2015, 41, p 12499–12503CrossRef

28.

S. Majumdar, S. Raveendra, I. Samajdar, P. Bhargava, and I.G. Sharm, Densification and Grain Growth during Isothermal Sintering of Mo and Mechanically Alloyed Mo-TZM, Acta Mater., 2009, 57, p 4158–4168CrossRef

29.

N.A. Travitzky, Effect of Metal Volume Fraction on the Mechanical Properties of Alumina/Aluminum Composites, J. Mater. Sci., 2001, 36, p 4459–4463CrossRef

30.

H. Prielipp and M. Knechte, Strength and Fracture Toughness of Aluminum/Alumina Composites with Interpenetrating Networks, Mater. Sci. Eng., A, 1995, 197, p 19–30CrossRef

31.

L.D. Wegner and L.J. Gibson, The Mechanical Behaviour of Interpenetrating Phase Composites—III: Resin-Impregnated Porous Stainless Steel, Int. J. Mech. Sci., 2001, 43, p 1061–1072CrossRef

32.

D.J. O’Brien and B. Parquette, Polymer Toughness Transfer in a Transparent Interpenetrating Glass-Polymer Composite, Comput. Sci. Technol., 2012, 73, p 57–63CrossRef

33.

Z. Fan and A.P. Miodownik, The Deformation Behaviour of Alloys Comprising Two Ductile Phases—I. Deformation Theory, Acta Metall. Mater., 1993, 41, p 2403–2415CrossRef

Title: Effect of Sintering Temperature of Mo Skeleton on the Contiguity and Compressive Properties of Mo-Cu IPCs
Authors: Longfei Liu
Fuhua Cao
Liwei Lu
Jianhui Yan
Publication date: 20-12-2016
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 2/2017
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-016-2471-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2017

Wear and Corrosion Behavior of Functionally Graded Nano-SiC/2014Al Composites Produced by Powder Metallurgy

Characterization of Surface Films Formed During Corrosion of a Pipeline Steel in H2S Environments

Characterization of Ti-6Al-4V Tribopairs: Effect of Thermal Oxidation Treatment

The Effect of Structural Quality on Fatigue Life in 319 Aluminum Alloy Castings

Tensile and Fatigue Properties of Single and Multiple Dissimilar Welded Joints of DP980 and HSLA

Effect of Post-weld Heat Treatment on the Mechanical Properties of Supermartensitic Stainless Steel Deposit

Premium Partners