Top

Journal of Materials Engineering and Performance

Published in:

01-11-2014

Effect of Ultrasonic Shot Peening on Microstructure and Mechanical Properties of High-Nitrogen Austenitic Stainless Steel

Authors: P. K. Rai, Vaibhav Pandey, K. Chattopadhyay, L. K. Singhal, V. Singh

Published in: Journal of Materials Engineering and Performance | Issue 11/2014

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The effect of ultrasonic shot peening (USSP) was studied on microstructural modification and mechanical properties such as microhardness, yield strength, tensile strength, and low cycle fatigue (LCF) life of a nitrogen stabilized austenitic stainless steel, at room temperature. There was grain refinement up to nano scale in surface region of the shot peened specimens and the microhardness was increased markedly up to the depth of approximately 100 µm. There was insignificant increase in yield and tensile strength, but drastic reduction in LCF life, particularly at low strain amplitude, from USSP. The nominal increase in yield and tensile strength was due to grain refinement in the surface region and drastic fall in LCF life was due to surface cracking resulting from USSP.

previous article Effect of Interlayer Thickness on Joint Formation Between Ti-6Al-4V and Mg-AZ31 Alloys

next article Microstructure and Corrosion Behavior of Electrodeposited Ni-Co-ZrC Coatings

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

J.W. Simmons, Overview: High Nitrogen Alloying of Stainless Steel, Mater. Sci. Eng. A, 1996, 207, p 159CrossRef

M.O. Speidel, Properties and Applications of High Nitrogen Steels, HNS 88, Lille, France, May 1988, J. Foct and A. Hendry, Ed., The Institute of Metals, London, 1989, p 92

J.A. Disegi and L. Eschbach, Stainless Steel in Bone Surgery, Injury, 2000, 31, p 4

C. Schmidt, A. Ignatius, and L.E. Claes, Proliferation and Differentiation Parameters of Human Osteoblasts on Titanium and Steel Surfaces, J. Biomed. Mater. Res., 2001, 54, p 209CrossRef

M.E. Ferreira, M.L. Pereira, E. Garcia, F. Costa, J.P. Sousa, and G.S.D. Carvalho, Comparative Study of Metallic Biomaterials Toxicity: A Histochemical and Immunohistochemical Demonstration in Mouse Spleen, J. Trace Elem. Med Biol., 2003, 17, p 45CrossRef

M.C. Pereira, M.L. Pereira, and J.P. Sousa, Evaluation of Nickel Toxicity on Liver, Spleen, and Kidney of Mice After Administration of High-Dose Metal Ion, J. Biomed. Mater. Res., 1998, 40, p 40CrossRef

J. Uggowitzer, R. Magdowski, and M. Speidel, Nickel Free High Nitrogen Austenitic Steel, ISIJ Int., 1996, 36, p 901CrossRef

J. Menzel, W. Kirschner, and G. Stein, High Nitrogen Containing Ni-Free Austenitic Steels for Medical Applications, ISIJ Int., 1996, 36, p 893CrossRef

IARC, IARC Monographs on the Evaluation of Carcinogenic Risks to Humans: Surgical Implants and Other Foreign Bodies, IARC Monogr. (Lyon), 1999, 74, p 65

10.

G. Sudhakar Rao, Vakil Singh, and L.K. Singhal, In Vitro Corrosion Fatigue Behavior of Low Nickel High Nitrogen Austenitic Stainless Steel, Mater. Sci. Eng. A, 2012, 538, p 224CrossRef

11.

J.-B. Vogt, Fatigue Properties of High Nitrogen Steels, J. Mater. Process. Technol., 2001, 117, p 364CrossRef

12.

C. Bo and Z. Zheng, Low Cycle Fatigue Behavior of a High Nitrogen Austenitic Stainless Steel Under Uniaxial and Non-proportional Loadings Based on the Partition of Hysteresis Loops, Mater. Sci. Eng. A, 2012, 547, p 72CrossRef

13.

M.O. Speidel and R.M. Pedrazzoli, High Nitrogen Stainless Steels in Chloride Solutions, Mater. Perform., 1992, 31, p 59

14.

M. Janik-Czachor, E. Lunarska, and Z. Szklarska Smialowska, Effect of Nitrogen Content in a 18Cr-5Ni-10Mn Stainless Steel on the Pitting Susceptibility in Chloride Solution, Corrosion, 1975, 31, p 394CrossRef

15.

L. Reclaru, R. Ziegenhagen, P.-Y. Eschler, A. Blatter, and J. Lemaître, Comparative Corrosion Study of “Ni-free” Austenitic Stainless Steels in View of Medical Applicationss, Acta Biomater., 2006, 2, p 433CrossRef

16.

C. Koch, The Synthesis of Non-equilibrium Structures by Ball-Milling, Mater. Sci. Forum, 1992, 243, p 88

17.

R. Valiev, A. Korznikov, and R. Mulyukov, Structure and Properties of Ultrafine-Grained Materials Produced by Severe Plastic Deformation, Mater. Sci. Eng. A, 1993, 168, p 141CrossRef

18.

K. Lu, J.T. Wang, and W.D. Wei, A New Method for Synthesizing Nanocrystalline Alloys, J. Appl. Phys., 1991, 69, p 522CrossRef

19.

U. Erb, A. EI-Sherik, G. Palumbo, and K. Aust, Synthesis, Structure and Properties of Electroplated Nanocrystalline Materials, Nanostruct. Mater., 1993, 2, p 383CrossRef

20.

T. Roland, D. Retraint, K. Lu, and J. Lu, Enhanced Mechanical Behavior of a Nanocrystallised Stainless Steel and its Thermal Stability, Mater. Sci. Eng. A, 2007, 445-446, p 281CrossRef

21.

N.R. Tao, J. Lu, and K. Lu, Surface Nanocrystallization by Surface Mechanical Attrition Treatment, Mater. Sci. Forum, 2008, 579, p 91CrossRef

22.

G. Liu, J. Lu, and K. Lu, Surface Nanocrystallization of 316L Stainless Steel Induced by Ultrasonic Shot Peening, Mater. Sci. Eng. A, 2000, 286, p 91CrossRef

23.

N.R. Tao, Z.B. Wang, W.P. Tong, M.L. Sui, J. Lu, and K. Lu, An Investigation of Surface Nanocrystallization Mechanism in Fe Induced by Surface Mechanical Attrition Treatment, Acta Mater., 2002, 50, p 4603CrossRef

24.

D.C. Ludwigson, Modified Stress-Strain Relation for FCC Metals and Alloys, Metall. Trans., 1971, 2, p 2825CrossRef

25.

B.D. Cullity, Elements of X-ray Diffraction, Addison Wesley, Reading, MA, 1956

26.

G.E. Dieter, Mechanical Metallurgy, McGraw-Hill Book Company, Singapore, 1988

Title: Effect of Ultrasonic Shot Peening on Microstructure and Mechanical Properties of High-Nitrogen Austenitic Stainless Steel
Authors: P. K. Rai
Vaibhav Pandey
K. Chattopadhyay
L. K. Singhal
V. Singh
Publication date: 01-11-2014
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 11/2014
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-014-1180-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11/2014

Failure Analysis of Warm Stamping of Magnesium Alloy Sheet Based on an Anisotropic Damage Model

Inverse Thermal Analysis of Ti-6Al-4V Deep-Penetration Welds Using Volumetric Constraints

Preliminary Study on the Formability of a Laser-Welded Superplastic Aluminum Alloy

Ratcheting Behavior of a Non-conventional Stainless Steel and Associated Microstructural Variations

Interaction of Benzimidazoles and Benzotriazole: Its Corrosion Protection Properties on Mild Steel in Hydrochloric Acid

Mechanical Properties of Steel Surfaces Coated with HfN/VN Superlattices

Premium Partners