Top

Published in:

2024 | OriginalPaper | Chapter

Efficient Extraction of Cd in Zn Recovery Process by Wet Leaching of Zn-Rich Dust

Authors : Yan Li, Xuefeng She, Jingsong Wang, Zeming Wang, Qingguo Xue

Published in: Rare Metal Technology 2024

Publisher: Springer Nature Switzerland

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This study develops a green and efficient hydrometallurgical process for the recovery of Zn and Cd from Zn-rich dust after pyrometallurgical treatment of iron and steel metallurgical dust. The feasibility of separating Zn, Cd, and Fe in the leaching system was confirmed by thermodynamic analysis. In the acid leaching process, dilute H₂SO₄ is used as the leaching agent, Zn and Cd are leached and recovered in the liquid in the form of Zn₂SO₄ and Cd₂SO₄. This article studies the leaching behavior of Cd and Bi under different experimental conditions (such as H₂SO₄ concentration, liquid-to-solid ratio, temperature, and reaction time). Under the optimal conditions, the leaching rates of Cd and Bi are 93.15% and 0.78% respectively. In the second step, the Cd in the leaching solution is extracted through the replacement process to prepare Cd products to realize resource utilization.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Effect of MgO, MnO, and Al2O3 on Vanadium Extraction in Sodium Roasting-Water Leaching Process of Vanadium Slag

next chapter Extraction of Vanadium from High Calcium and High Phosphorus Vanadium Slag by Magnesiation Roasting-Acid Leaching

Wu G, Kang H, Zhang X et al (2010) A critical review on the bio-removal of hazardous heavy metals from contaminated soils: issues, progress, eco-environmental concerns and opportunities. J Hazard Mater 174:1–8. https://doi.org/10.1016/j.jhazmat.2009.09.113CrossRefPubMed

Gunarathne V, Rajapaksha AU, Vithanage M et al (2022) Hydrometallurgical processes for heavy metals recovery from industrial sludges. Crit Rev Environ Sci Technol 52:1022–1062. https://doi.org/10.1080/10643389.2020.1847949CrossRef

Li Y, Feng H, Wang J et al (2022) Current status of the technology for utilizing difficult-to-treat dust and sludge produced from the steel industry. J Clean Prod 367:132909. https://doi.org/10.1016/j.jclepro.2022.132909CrossRef

Rahman Z, Singh VP (2019) The relative impact of toxic heavy metals (THMs) (arsenic (As), cadmium (Cd), chromium (Cr)(VI), mercury (Hg), and lead (Pb)) on the total environment: an overview. Environ Monit Assess 191:419. https://doi.org/10.1007/s10661-019-7528-7CrossRefPubMed

Kikuchi T, Okazaki M, Toyota K et al (2007) The input–output balance of cadmium in a paddy field of Tokyo. Chemosphere 67:920–927. https://doi.org/10.1016/j.chemosphere.2006.11.018CrossRefPubMed

Rafiq MT, Aziz R, Yang X et al (2014) Cadmium phytoavailability to rice (Oryza sativa L.) grown in representative Chinese soils. A model to improve soil environmental quality guidelines for food safety. Ecotoxicol Environ Saf 103:101–107. https://doi.org/10.1016/j.ecoenv.2013.10.016CrossRefPubMed

Wang P, Chen H, Kopittke PM et al (2019) Cadmium contamination in agricultural soils of China and the impact on food safety. Environ Pollut 249:1038–1048. https://doi.org/10.1016/j.envpol.2019.03.063CrossRefPubMed

Kanthiah A, Manimaran EI, Pactulingam R (2020) Microstructural and magnetic properties of cadmium incorporated magnetic alloys as monolayer and multilayer coatings. J Mater Sci Mater Electron 31:19332–19342. https://doi.org/10.1007/s10854-020-04467-4CrossRef

Ganesan P, Kumaraguru SP, Popov BN (2006) Development of Zn–Ni–Cd coatings by pulse electrodeposition process. Surf Coatings Technol 201:3658–3669. https://doi.org/10.1016/j.surfcoat.2006.08.143CrossRef

10.

Rana M, Ishtiaq Hossain Khan M, Nshizirungu T et al (2023) Green and sustainable route for the efficient leaching and recovery of valuable metals from spent Ni−Cd batteries. Chem Eng J 455:140626. https://doi.org/10.1016/j.cej.2022.140626CrossRef

11.

Turner A (2019) Cadmium pigments in consumer products and their health risks. Sci Total Environ 657:1409–1418. https://doi.org/10.1016/j.scitotenv.2018.12.096CrossRefPubMed

12.

Rayner G, Costello SD, McClelland A et al (2021) Preliminary investigations into the alteration of cadmium orange restoration paint on an ancient greek terracotta krater. Heritage 4:1497–1510. https://doi.org/10.3390/heritage4030082CrossRef

13.

Paramanik S, Chatterjee S, Pal AJ (2021) Reverse bandgap-bowing in nickel-cadmium sulfide alloys (Ni_1−x Cd_xS) and its origin. J Phys Condens Matter 33:245703. https://doi.org/10.1088/1361-648X/abe9d8CrossRef

14.

Kruglikov SS, Nekrasova NE, Kuznetsov VV et al (2019) An electromembrane process for cadmium recovery from dilute cadmium electroplating dragout solutions. Membr Membr Technol 1:120–126. https://doi.org/10.1134/S2517751619020057CrossRef

15.

Kubier A, Wilkin RT, Pichler T (2019) Cadmium in soils and groundwater: a review. Appl Geochemistry 108:104388. https://doi.org/10.1016/j.apgeochem.2019.104388CrossRef

16.

Zhang H, Reynolds M (2019) Cadmium exposure in living organisms: a short review. Sci Total Environ 678:761–767. https://doi.org/10.1016/j.scitotenv.2019.04.395CrossRefPubMed

17.

Chang F, Wu S, Zhang F et al (2015) Characterization of sintering dust, blast furnace dust and carbon steel electric arc furnace dust. Charact Miner Met Mater 2015:83–90. https://doi.org/10.1007/978-3-319-48191-3_10CrossRef

18.

Xiao X, Zhang S, Sher F et al (2021) A review on recycling and reutilization of blast furnace dust as a secondary resource. J Sustain Metall 7:340–357. https://doi.org/10.1007/s40831-021-00377-9CrossRef

19.

Wang J, Li Y, Feng H et al (2021) Progress in treating difficult-to-handle dust and sludge and full-scale resource utilization in an iron and steel industry cluster. Chin J Eng 43:1737–1746. https://doi.org/10.13374/j.issn2095-9389.2021.09.15.004

20.

Wang J, Zhang Y, Cui K et al (2021) Pyrometallurgical recovery of zinc and valuable metals from electric arc furnace dust—A review. J Clean Prod 298:126788. https://doi.org/10.1016/j.jclepro.2021.126788CrossRef

21.

Li Y, Zhao Z, Feng H et al (2022) Technology of treating zinc-containing dust and mud in iron and steel plant by rotary hearth furnace. Sinter Pelletizing 47:106–114. https://doi.org/10.13403/j.sjqt.2022.06.091

22.

Li Y, Feng H, Wang J et al (2023) Efficient extraction of Bismuth in a two-stage leaching process for the recovery of zinc and lead from zinc-rich dust. Miner Met Mater Ser 297–309. https://doi.org/10.1007/978-3-031-22765-3_27

23.

Jha MK, Kumar V, Singh RJ (2001) Review of hydrometallurgical recovery of zinc from industrial wastes. Resour Conserv Recycl 33:1–22. https://doi.org/10.1016/S0921-3449(00)00095-1CrossRef

24.

Kukurugya F, Vindt T, Havlík T (2015) Behavior of zinc, iron and calcium from electric arc furnace (EAF) dust in hydrometallurgical processing in sulfuric acid solutions: thermodynamic and kinetic aspects. Hydrometallurgy 154:20–32. https://doi.org/10.1016/j.hydromet.2015.03.008CrossRef

25.

Halli P, Hamuyuni J, Revitzer H et al (2017) Selection of leaching media for metal dissolution from electric arc furnace dust. J Clean Prod 164:265–276. https://doi.org/10.1016/j.jclepro.2017.06.212CrossRef

26.

Kaya M, Hussaini S, Kursunoglu S (2020) Critical review on secondary zinc resources and their recycling technologies. Hydrometallurgy 195:105362. https://doi.org/10.1016/j.hydromet.2020.105362CrossRef

27.

Trinkel V, Mallow O, Thaler C et al (2015) Behavior of chromium, nickel, lead, zinc, cadmium, and mercury in the blast furnace—a critical review of literature data and plant investigations. Ind Eng Chem Res 54:11759–11771. https://doi.org/10.1021/acs.iecr.5b03442CrossRef

28.

Qiang L, Pinto ISS, Youcai Z (2014) Sequential stepwise recovery of selected metals from flue dusts of secondary copper smelting. J Clean Prod 84:663–670. https://doi.org/10.1016/j.jclepro.2014.03.085CrossRef

29.

Trung ZH, Kukurugya F, Takacova Z et al (2011) Acidic leaching both of zinc and iron from basic oxygen furnace sludge. J Hazard Mater 192:1100–1107. https://doi.org/10.1016/j.jhazmat.2011.06.016CrossRefPubMed

Title: Efficient Extraction of Cd in Zn Recovery Process by Wet Leaching of Zn-Rich Dust
Authors: Yan Li
Xuefeng She
Jingsong Wang
Zeming Wang
Qingguo Xue
Publisher: Springer Nature Switzerland
Book: Rare Metal Technology 2024
Print ISBN: 978-3-031-50235-4

Electronic ISBN: 978-3-031-50236-1

Copyright Year: 2024
DOI: https://doi.org/10.1007/978-3-031-50236-1_41

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners