Top

Cellulose

Published in:

24-05-2018 | Note

Elastic moduli of cellulose nanofibers isolated from various cellulose resources by using aqueous counter collision

Authors: Lindong Zhai, Hyun Chan Kim, Jung Woong Kim, Jinmo Kang, Jaehwan Kim

Published in: Cellulose | Issue 7/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

An atomic force microscopy (AFM) three-points bending (TPB) test is very useful to measure the mechanical properties of cellulose nanofibers (CNFs). This study investigates the Young’s moduli of various CNFs by using AFM TPB test. CNFs were isolated from hardwood, softwood, bamboo and cotton by using an aqueous counter collision (ACC) method. Single CNF was transferred to the AFM calibration chip by using contact transfer for the AFM TPB test and the CNF was considered as a clamped-clamped beam. An Euler equation was used to calculate Young’s modulus under linear deformation assumption. The cross section of single CNF is assumed to be circular shape. Young’s moduli of hardwood, softwood, bamboo and cotton CNFs isolated by ACC method are in the range of 88–110 GPa, which are comparable with the previously reported values.

previous article Antibacterial performance of Tencel fabric dyed with pomegranate peel extracted via ultrasonic method

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Abe K, Iwanoto S, Yano H (2007) Obtaining cellulose nanofibers with a uniform width of 15 nm from wood. Biomacromolecules 8:3276–3278. https://doi.org/10.1021/bm700624p CrossRefPubMed

Binnig G, Quate CF, Gerber C (1986) Atomic force microscope. Phys Rev Lett 56:930–933. https://doi.org/10.1103/PhysRevLett.56.930 CrossRefPubMed

Boldizar A, Klason C, Kubát J, Näslund P, Sáha P (2006) Prehydrolyzed cellulose as reinforcing filler for thermoplastics. Int J Polym Mater Polym Biomater 11:229–262. https://doi.org/10.1080/00914038708078665 CrossRef

Burnham NA, Colton RJ (1989) Measuring the nanomechanical properties and surface forces of materials using an atomic force microscope. J Vac Sci Technol 7:2906–2913. https://doi.org/10.1116/1.576168 CrossRef

Chen X, Kuhn E, Wang W, Park S, Flanegan K, Trass O, Tenlep L, Tao L, Tucker M (2013) Comparison of different mechanical refining technologies on the enzymatic digestibility of low severity acid pretreated corn stover. Bioresour Technol 147:401–408. https://doi.org/10.1016/j.biortech.2013.07.109 CrossRefPubMed

Cheng Q, Wang S (2008) A method for testing the elastic modulus of single cellulose fibrils via atomic force microscopy. Compos Pt A-Appl Sci Manuf 39:1838–1843. https://doi.org/10.1016/j.compositesa.2008.09.007 CrossRef

Cheng Q, Wang S, Harper DP (2009) Effects of process and source on elastic modulus of single cellulose fibrils evaluated by atomic force microscopy. Compos Pt A-Appl Sci Manuf 40:583–588. https://doi.org/10.1016/j.compositesa.2009.02.011 CrossRef

Eichhorn SJ, Young RJ (2001) The Young’s modulus of a microcrystalline cellulose. Cellulose 8:197–207. https://doi.org/10.1023/A:1013181804540 CrossRef

Gilberto S, Sandra TL, Julien B, Denilson SP, Alain D (2010) Morphological investigation of nanoparticles obtained from combined mechanical shearing, and enzymatic and acid hydrolysis of sisal fibers. Cellulose 17:1147–1158. https://doi.org/10.1007/s10570-010-9449-z CrossRef

Guhados G, Wan W, Hutter JL (2005) Measurement of the elastic modulus of single bacterial cellulose fibers using atomic force microscopy. Langmuir 21:6642–6646. https://doi.org/10.1021/la0504311 CrossRefPubMed

Heidelberg A, Ngo LT, Wu B, Phillips MA, Sharma S, Kamins TI, Sader JE, Boland JJ (2006) A generalized description of the elastic properties of nanowires. Nano Lett 6:1101–1106CrossRefPubMed

Henriksson M, Henriksson G, Berglund LA, Lindström T (2007) An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibers. Eur Polym J 43:3434–3441. https://doi.org/10.1016/j.eurpolymj.2007.05.038 CrossRef

Huang P, Wu M, Kuga S, Wang D, Wu D, Huang Y (2012) One-step dispersion of cellulose nanofibers by mechanochemical esterification in an organic solvent. Chemsuschem 5:2319–2322. https://doi.org/10.1002/cssc.201200492 CrossRefPubMed

Isogai A, Saito T, Fukuzumi H (2011) TEMPO-oxidized cellulose nanofibers. Nanoscale 1:71–85. https://doi.org/10.1039/C0NR00583E CrossRef

Iwamoto S, Kai W, Isogai A, Iwata T (2009) Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy. Biomacromolecules 10:2571–2576. https://doi.org/10.1021/bm900520n CrossRefPubMed

Kondo T, Morita M, Hayakawa K, Onda Y (2005) Wet pulverizing of polysaccharides. US patent US 7357339 B2

Kondo T, Kose R, Naito H, Kasai W (2014) Aqueous counter collision using paired water jets as a novel means of preparing bio-nanofibers. Carbohydr Polym 112:284–290. https://doi.org/10.1016/j.carbpol.2014.05.064 CrossRefPubMed

Kose R, Mitani I, Kasai W, Kondo T (2011) “Nanocellulose” as a single nanofiber prepared from pellicle secreted by Gluconacetobacter xylinus using aqueous counter collision. Biomacromolecules 12:716–720. https://doi.org/10.1021/bm1013469 CrossRefPubMed

Loo YL, Willett RL, Baldwin KW, Rogers JA (2002) Interfacial chemistries for nanoscale transfer printing. J Am Chem Soc 124:7654–7655. https://doi.org/10.1021/ja026355v CrossRefPubMed

Mimms A (1993) Kraft pulping: a compilation of notes. TAPPI Press, Atlanta

Ni H, Li X, Gao H (2006) Elastic modulus of amorphous SiO₂ nanowires. Appl Phys Lett 88:043108. https://doi.org/10.1063/1.2165275 CrossRef

Pääkko M, Ankerfors M, Kosonen H, Nykänen A, Ahola S, Österberg M, Ruokolainen J, Laine J, Larsson PT, Ikkala O, Lindström T (2007) Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules 8:1934–1941. https://doi.org/10.1021/bm061215p CrossRefPubMed

Sakurada I, Nukushina Y, Ito T (1962) Experimental determination of elastic modulus of crystalline regions in oriented polymers. J Polym Sci 57:651–660. https://doi.org/10.1002/pol.1962.1205716551 CrossRef

Salvetat JP, Bonard JM, Thomson NH, Kulik AJ, Forro L, Benoit W, Zuppiroli L (1999) Mechanical properties of carbon nanotubes. Appl Phys A-Mater Sci Process 69:255–260. https://doi.org/10.1007/s003390050999 CrossRef

Sundari MT, Ramesh A (2012) Isolation and characterization of cellulose nanofibers from the aquatic weed water hyacinth—Eichhornia crassipes. Carbohydr Polym 87:1701–1705. https://doi.org/10.1016/j.carbpol.2011.09.076 CrossRef

Tan EPS, Lim CT (2004) Physical properties of a single polymeric nanofiber. Appl Phys Lett 84:1603–1605. https://doi.org/10.1063/1.1651643 CrossRef

Tang B, Ngan AHW, Pethica JB (2008) A method to quantitatively measure the elastic modulus of materials in nanometer scale using atomic force microscopy. Nanotechnology 19:495713. https://doi.org/10.1088/0957-4484/19/49/495713 CrossRefPubMed

Tang L, Huang B, Ou W, Chen X, Chen Y (2011) Manufacture of cellulose nanocrystals by cation exchange resin-catalyzed hydrolysis of cellulose. Bioresour Technol 102:10973–10977. https://doi.org/10.1016/j.eurpolymj.2007.05.038 CrossRefPubMed

Tsuboi K, Yokata S, Kondo T (2014) Difference between bamboo- and wood-derived cellulose nanofibers prepared by the aqueous counter collision method. Nordic Pulp Pap Res J 29:69–76CrossRef

Wu B, Heidelberg A, Boland JJ (2005) Mechanical properties of ultrahigh-strength gold nanowires. Nat Mater 4:525–529. https://doi.org/10.1038/nmat1403 CrossRefPubMed

Xu W, Mulhern PJ, Blackford BL, Jericho MH, Templeton I (1994) A new atomic-force microscopy technique for the measurement of the elastic properties of biological-materials. Scan Microsc 8:499–506

Zhao HP, Feng XQ, Gao H (2007) Ultrasonic technique for extracting nanofibers from nature materials. Appl Phys Lett 90:073112. https://doi.org/10.1063/1.2450666 CrossRef

Title: Elastic moduli of cellulose nanofibers isolated from various cellulose resources by using aqueous counter collision
Authors: Lindong Zhai
Hyun Chan Kim
Jung Woong Kim
Jinmo Kang
Jaehwan Kim
Publication date: 24-05-2018
Publisher: Springer Netherlands
Published in: Cellulose / Issue 7/2018
Print ISSN: 0969-0239
Electronic ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-018-1836-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Other articles of this Issue 7/2018

Highly transparent 100% cellulose nanofibril films with extremely high oxygen barriers in high relative humidity

In-situ analysis of polyelectrolyte complexes by flow cytometry

Preparation of cellulose colloidal particles in aqueous solution with good photochromic and photoluminescent performances by grafting a spiropyran derivative onto filter paper cellulose

Functional nanomaterials through esterification of cellulose: a review of chemistry and application

Highly efficient visible-light photocatalyst based on cellulose derived carbon nanofiber/BiOBr composites

Cationic cellulose nanocrystals (CCNCs) and chitosan nanocomposite films filled with CCNCs for removal of reactive dyes from aqueous solutions