Skip to main content
Top
Published in: Environmental Earth Sciences 9/2015

01-05-2015 | Original Article

Experimental study on meso-damage cracking characteristics of RSA by CT test

Authors: Y. Wang, X. Li, Y. F. Wu, C. Lin, B. Zhang

Published in: Environmental Earth Sciences | Issue 9/2015

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

This paper investigates the meso-damage mechanism and the cracking characteristics of rock and soil aggregate (RSA) by X-ray computed tomography (CT) under uniaxial compressive loading. Cylindrical RSA specimens (50 mm diameter and 100 mm height) with rock percentage 40 % were produced to perform a series of uniaxial compressive strength test. The damage cracking characteristic is identified by the mean CT value, and also the meso-damage propagation law is analyzed based on the damage factor defined by the CT value. From the test results, the variation of CT value for region of interest is different at the same stress level, the mean CT value for the RSA specimen, and rock block inclusions, and their adjacent soil regions decrease with the increasing stress level. It is more sensitive for block inclusions than soil regions. Also, the meso-damage evolution equation and constitutive equation for RSA are established. The estimated result is in agreement with the measured result. Moreover, based on the image threshold segmentation method, length, area, and mean width of cracks obey to power function distribution. Crack statistical characteristics are closely related to the rock block’s distribution and morphology. These results confirm that the elastic mismatch of RSA is the primary reason resulting in cracking under loading, damage characteristics of RSA is progressive, cracking begins from rock–soil interfaces, and then propagate into soil matrix.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
go back to reference Akin S, Kovscek AR (2003) Computed tomography in petroleum engineering research. In: Mees F, Swennen R, Van GM (eds) Application of X-ray computed tomography in the geosciences. Special Publication-Geological Society of London, 215, p 23–38 Akin S, Kovscek AR (2003) Computed tomography in petroleum engineering research. In: Mees F, Swennen R, Van GM (eds) Application of X-ray computed tomography in the geosciences. Special Publication-Geological Society of London, 215, p 23–38
go back to reference Ashbridge DA, Thorne MS, River ML (2003) Image optimization and analysis of synchrotron X-ray computed microtomography date. Comput Geosci 29:823–836CrossRef Ashbridge DA, Thorne MS, River ML (2003) Image optimization and analysis of synchrotron X-ray computed microtomography date. Comput Geosci 29:823–836CrossRef
go back to reference Chaboche JL (1981) Continuum damage mechanics-a tool to describe phenomena before crack initiation. Num Eng Des 64:233–247CrossRef Chaboche JL (1981) Continuum damage mechanics-a tool to describe phenomena before crack initiation. Num Eng Des 64:233–247CrossRef
go back to reference Chen CG, Yao LK, Wang Q (2003) Application of three dimensional discrete element method in studies of debris-flow deposit process. J Nat Disasters 4:55–61 Chen CG, Yao LK, Wang Q (2003) Application of three dimensional discrete element method in studies of debris-flow deposit process. J Nat Disasters 4:55–61
go back to reference Chen HQ, Huang RQ, Lin F (2005) Study on the spatial effect of large accumulation slope. Chin J Geotech Eng 27:323–328 Chen HQ, Huang RQ, Lin F (2005) Study on the spatial effect of large accumulation slope. Chin J Geotech Eng 27:323–328
go back to reference Ding XL, Li YX, Wang X (2010) Particle flow modeling mechanical properties of soil and rock mixtures based on digital image (in Chinese). Chin J Rock Mech Eng 29(3):477–484 Ding XL, Li YX, Wang X (2010) Particle flow modeling mechanical properties of soil and rock mixtures based on digital image (in Chinese). Chin J Rock Mech Eng 29(3):477–484
go back to reference Donaghe RT, Torrey VH (1994) Proposed new standard test method for laboratory compaction testing of soil-rock mixtures using standard effort. Geotech Test J 3:387–392 Donaghe RT, Torrey VH (1994) Proposed new standard test method for laboratory compaction testing of soil-rock mixtures using standard effort. Geotech Test J 3:387–392
go back to reference Ge XR, Ren JX, Bo YB (2000) Rock mesoscopic damage regularity of CT real-time test. Sci China (Ser E) 30(2):104–111 Ge XR, Ren JX, Bo YB (2000) Rock mesoscopic damage regularity of CT real-time test. Sci China (Ser E) 30(2):104–111
go back to reference Goodman RE, Ahlgren CS (2000) Evaluating safety of concrete gravity dam on weak rock. J Geotechn Geoenvironm Eng 126:429–442CrossRef Goodman RE, Ahlgren CS (2000) Evaluating safety of concrete gravity dam on weak rock. J Geotechn Geoenvironm Eng 126:429–442CrossRef
go back to reference Kachanov L (1986) Introduction to continuum damage mechanics. Martinus Nijhoff Publishers, DorderchtCrossRef Kachanov L (1986) Introduction to continuum damage mechanics. Martinus Nijhoff Publishers, DorderchtCrossRef
go back to reference Keller A (1998) High resolution, non-destructive measurement and characterization of fracture apertures. Int J Rock Mech Min 35:1037–1050CrossRef Keller A (1998) High resolution, non-destructive measurement and characterization of fracture apertures. Int J Rock Mech Min 35:1037–1050CrossRef
go back to reference Li SH, Wang YN (2004) Stochastic model and numerical simulation of uniaxial loading test for rock and soil blending by 3D –DEM (in Chinese). Chin J Geotech Eng 2:173–177 Li SH, Wang YN (2004) Stochastic model and numerical simulation of uniaxial loading test for rock and soil blending by 3D –DEM (in Chinese). Chin J Geotech Eng 2:173–177
go back to reference Li X, Liao QL, He JM (2004) In situ tests and a stochastic structural model of rock and soil aggregate in Three Gorges reservoir area. Int J Rock Mech Min 3:494CrossRef Li X, Liao QL, He JM (2004) In situ tests and a stochastic structural model of rock and soil aggregate in Three Gorges reservoir area. Int J Rock Mech Min 3:494CrossRef
go back to reference Lindquist ES (1994) The strength and deformation properties of melange. Ph.D. Thesis, Department of Civil Engineering, University of California. Berkeley Lindquist ES (1994) The strength and deformation properties of melange. Ph.D. Thesis, Department of Civil Engineering, University of California. Berkeley
go back to reference Medley E (2001) Orderly Characterization of Chaotic Franciscan Melanges. Eng Geol 4:20–32 Medley E (2001) Orderly Characterization of Chaotic Franciscan Melanges. Eng Geol 4:20–32
go back to reference Medley E, Lindquist ES (1995) The engineering significance of the scale-independence of some Franciscan Melanges in California, USA. In: Daemen JK, Schultz RA (eds) Proceedings of the 35th US rock mechanics symposium. Balkema, Rotterdam, pp 907–914 Medley E, Lindquist ES (1995) The engineering significance of the scale-independence of some Franciscan Melanges in California, USA. In: Daemen JK, Schultz RA (eds) Proceedings of the 35th US rock mechanics symposium. Balkema, Rotterdam, pp 907–914
go back to reference Ohtani T, Nakano T, Nakashima Y, Muraoka H (2001) Three-dimensional shape analysis of miarolitic cavities and enclaves in the Kokkonda granite by X-ray computed tomography. J Struct Geol 23:1741–1751CrossRef Ohtani T, Nakano T, Nakashima Y, Muraoka H (2001) Three-dimensional shape analysis of miarolitic cavities and enclaves in the Kokkonda granite by X-ray computed tomography. J Struct Geol 23:1741–1751CrossRef
go back to reference Ren JX, Ge XR, Pu YB (2000) Real-time CT test on the meso-damage evolution of rock under uniaxial compression. China Civ Eng J 30(6):99–104 Ren JX, Ge XR, Pu YB (2000) Real-time CT test on the meso-damage evolution of rock under uniaxial compression. China Civ Eng J 30(6):99–104
go back to reference Sheppard AP, Sok PM, Averdunk H (2004) Techniques for image enhancement and segmentation of tomographic images of porous materials. Physica A 339:145–151CrossRef Sheppard AP, Sok PM, Averdunk H (2004) Techniques for image enhancement and segmentation of tomographic images of porous materials. Physica A 339:145–151CrossRef
go back to reference Vallejo LE, Mawby R (2000) Porosity influence on the shear strength of granular material-clay mixtures. Eng Geol 58:125–136CrossRef Vallejo LE, Mawby R (2000) Porosity influence on the shear strength of granular material-clay mixtures. Eng Geol 58:125–136CrossRef
go back to reference Van GM, Swennen R, Wevers M (2000) Quantitative analysis of reservoir rocks by microfocus X-ray computerized tomography. Sedi Geo 132:25–36CrossRef Van GM, Swennen R, Wevers M (2000) Quantitative analysis of reservoir rocks by microfocus X-ray computerized tomography. Sedi Geo 132:25–36CrossRef
go back to reference Wang Y, Zhao MH, Li SH et al (2005) Stochastic structural model of rock and soil aggregates by continuum-based discrete element method. Sci China Tech Sci 48(1):95–106 Wang Y, Zhao MH, Li SH et al (2005) Stochastic structural model of rock and soil aggregates by continuum-based discrete element method. Sci China Tech Sci 48(1):95–106
go back to reference Xu WJ, Hu RL (2007) Some geomechanical properties of soil-rock mixtures in the Hutiao Gorge area, China. Geotechnique 3:255–264CrossRef Xu WJ, Hu RL (2007) Some geomechanical properties of soil-rock mixtures in the Hutiao Gorge area, China. Geotechnique 3:255–264CrossRef
go back to reference Xu WJ, Yue ZQ, Hu RL (2008) Study on the mesostructure and mesomechanical characteristics of the soil-rock mixture using digital image processing based finite element method. Int J Rock Mech Min 45:749–762CrossRef Xu WJ, Yue ZQ, Hu RL (2008) Study on the mesostructure and mesomechanical characteristics of the soil-rock mixture using digital image processing based finite element method. Int J Rock Mech Min 45:749–762CrossRef
go back to reference Yang GS, Xie DY, Zhang CQ (1996) CT identification of rock damage properties. Chin J Rock Mech Eng 15(1):48–54 Yang GS, Xie DY, Zhang CQ (1996) CT identification of rock damage properties. Chin J Rock Mech Eng 15(1):48–54
go back to reference You XH, Tang JS (2002) Research on horizontal push-shear in situ test of soil and rock-mixture. Chin J Rock Mech Eng 10:1537–1540 You XH, Tang JS (2002) Research on horizontal push-shear in situ test of soil and rock-mixture. Chin J Rock Mech Eng 10:1537–1540
go back to reference Yue ZQ (2006) Digital representation of mesogeomaterial spatial distribution and associated numerical analysis of geomechanics: methods, applications and development (in Chinese). Chin J Rock Mech Eng 5:875–888 Yue ZQ (2006) Digital representation of mesogeomaterial spatial distribution and associated numerical analysis of geomechanics: methods, applications and development (in Chinese). Chin J Rock Mech Eng 5:875–888
go back to reference Zhang Y, Wang JG, Shi RF (2004) Time-dependent deformation in high concrete-faced rockfill dam and separation between concrete face slab and cushion layer. Comput Geotech 7:559–573CrossRef Zhang Y, Wang JG, Shi RF (2004) Time-dependent deformation in high concrete-faced rockfill dam and separation between concrete face slab and cushion layer. Comput Geotech 7:559–573CrossRef
Metadata
Title
Experimental study on meso-damage cracking characteristics of RSA by CT test
Authors
Y. Wang
X. Li
Y. F. Wu
C. Lin
B. Zhang
Publication date
01-05-2015
Publisher
Springer Berlin Heidelberg
Published in
Environmental Earth Sciences / Issue 9/2015
Print ISSN: 1866-6280
Electronic ISSN: 1866-6299
DOI
https://doi.org/10.1007/s12665-014-3808-2

Other articles of this Issue 9/2015

Environmental Earth Sciences 9/2015 Go to the issue